Anaerobic treatment of tequila vinasses under seasonal operating conditions: start-up, normal operation and restart-up after a long stop and starvation period.

This study examines the performance of an anaerobic fixed-film bioreactor under seasonal operating conditions prevailing in medium and small size Tequila factories: start-up, normal operation and particularly, during the restart-up after a long stop and starvation period. The proposed start-up procedure attained a stable biofilm in a rather short period (28 days) despite unbalanced COD/N/P ratio and the use of non-acclimated inoculum. The bioreactor was restarted-up after being shut down for 6 months during which the inoculum starved. Even when biofilm detachment and bioreactor clogging were detected at the very beginning of restart-up, results show that the bioreactor performed better as higher COD removal and methane yield were attained. CE-SSCP and Q-PCR analyses, conducted on the biofilm prokaryotic communities for each operating condition, confirmed that the high COD removal results after the bioreactor clogging and the severe starvation period were mainly due to the stable archaeal and resilient bacterial populations.

Regulation of the organic pollution level in anaerobic digesters by using off-line COD measurements.

A sampled delayed scheme is proposed to regulate the organic pollution level in anaerobic digestion processes by using off-line COD measurements. The proposed scheme is obtained by combining an error feedback control with a steady state estimator to track constant references and attenuate process load disturbances. The controller performance is tested experimentally for the treatment of tequila vinasses over a period of 68days under different set-point values and several uncertain scenarios which include badly known kinetic parameters and load disturbances. Experimental results show that the COD concentration can be effectively regulated under the influence of set-point changes and high load disturbances by using only a daily off-line COD measurement, which makes the industrial application of the proposed control scheme feasible.

Kinetic parameters estimation in an anaerobic digestion process using successive quadratic programming.

In this work, an optimization method is implemented in an anaerobic digestion model to estimate its kinetic parameters and yield coefficients. This method combines the use of advanced state estimation schemes and powerful nonlinear programming techniques to yield fast and accurate estimates of the aforementioned parameters. In this method, we first implement an asymptotic observer to provide estimates of the non-measured variables (such as biomass concentration) and good guesses for the initial conditions of the parameter estimation algorithm. These results are then used by the successive quadratic programming (SQP) technique to calculate the kinetic parameters and yield coefficients of the anaerobic digestion process. The model, provided with the estimated parameters, is tested with experimental data from a pilot-scale fixed bed reactor treating raw industrial wine distillery wastewater. It is shown that SQP reaches a fast and accurate estimation of the kinetic parameters despite highly noise corrupted experimental data and time varying inputs variables. A statistical analysis is also performed to validate the combined estimation method. Finally, a comparison between the proposed method and the traditional Marquardt technique shows that both yield similar results; however, the calculation time of the traditional technique is considerable higher than that of the proposed method.