Biological action of bleaching agents on tooth structure: A review.

The use of bleaching agents to remove stains is one of the main dental procedures to improve the aesthetics of teeth. This review presents the main agents used for tooth whitening, existing clinical protocols, and the structural changes that may occur through their use. The main bleaching agents consist of hydrogen peroxide and carbamide peroxide, which are used in bleaching techniques for vital teeth. These techniques can be performed in the office by a professional or by the individual in a home en-vironment under professional guidance. Bleaching agents come in a variety of concentrations and there are over-the-counter products available on the market with lower concentrations of hydrogen peroxide. Due to the chemical characteristics of the agents, changes in the organic and inorganic content of the tooth structure can be observed. These changes are related to morphological changes characterized by in-creased permeability and surface roughness, such changes compromise the mechanical resistance of the tooth. Furthermore, bleaching agents can promote molecular changes after reaching the dental pulp, resulting in oxidative stress of pulp cells and the release of pro-inflammatory mediators. Despite the bleaching effectiveness, tooth sensitivity is considered the main side effect of use. Therefore, among the heterogeneity of protocols, those that used the bleaching agent for a prolonged time and in lower con-centrations presented more harmful effects on the tooth structure.

Fracture resistance and bonding performance after antioxidants pre-treatment in non-vital and bleached teeth.

This study aimed to evaluate the effect of antioxidant solutions on fracture strength and bonding performance in non-vital and bleached (38% hydrogen peroxide) teeth. One hundred and eighty dentin specimens were obtained, 60 for each test: fracture strength, hybrid layer thickness, and bond strength. The groups (n=10) were randomly composed according to post-bleaching protocol: REST - restoration, without bleaching; BL - bleaching + restoration; SA - bleaching, 10% sodium ascorbate solution, and restoration; AT - bleaching, 10% α-tocopherol solution, and restoration; CRAN - bleaching, 5% cranberry solution, and restoration; CAP - bleaching, 0.0025% capsaicin solution, and restoration. Data were analyzed with ANOVA, Kruskal-Wallis, Dunn, and Qui-Square tests (α=0.05). The highest fracture strength values were observed in REST (1508.96 ±148.15 N), without significant difference for the bleached groups (p>0.05), regardless of the antioxidant use. The hybrid layer thickness in the group that was not subjected to bleaching (REST) was significantly higher than in any other group. The bond strength in the bleached and antioxidants-treated groups (SA, AT, CRAN, CAP) has no differences with the bleached group without antioxidants (BL). Adhesive failures were predominant in the groups that did not receive the antioxidant application. In conclusion, the evaluated antioxidants did not show an effect on the fracture strength, hybrid layer thickness, or bond strength of dentin bleached after endodontic treatment. The application of 10% sodium ascorbate, 10% alpha-tocopherol, 5% cranberry, or 0.0025% capsaicin solutions is not an effective step and should not be considered for the restorative protocols after non-vital bleaching.

Fracture resistance and bonding performance after antioxidants pre-treatment in non-vital and bleached teeth

Abstract This study aimed to evaluate the effect of antioxidant solutions on fracture strength and bonding performance in non-vital and bleached (38% hydrogen peroxide) teeth. One hundred and eighty dentin specimens were obtained, 60 for each test: fracture strength, hybrid layer thickness, and bond strength. The groups (n=10) were randomly composed according to post-bleaching protocol: REST - restoration, without bleaching; BL - bleaching + restoration; SA - bleaching, 10% sodium ascorbate solution, and restoration; AT - bleaching, 10% α-tocopherol solution, and restoration; CRAN - bleaching, 5% cranberry solution, and restoration; CAP - bleaching, 0.0025% capsaicin solution, and restoration. Data were analyzed with ANOVA, Kruskal-Wallis, Dunn, and Qui-Square tests (α=0.05). The highest fracture strength values were observed in REST (1508.96 ±148.15 N), without significant difference for the bleached groups (p>0.05), regardless of the antioxidant use. The hybrid layer thickness in the group that was not subjected to bleaching (REST) was significantly higher than in any other group. The bond strength in the bleached and antioxidants-treated groups (SA, AT, CRAN, CAP) has no differences with the bleached group without antioxidants (BL). Adhesive failures were predominant in the groups that did not receive the antioxidant application. In conclusion, the evaluated antioxidants did not show an effect on the fracture strength, hybrid layer thickness, or bond strength of dentin bleached after endodontic treatment. The application of 10% sodium ascorbate, 10% alpha-tocopherol, 5% cranberry, or 0.0025% capsaicin solutions is not an effective step and should not be considered for the restorative protocols after non-vital bleaching.

Resumo Este estudo teve como objetivo avaliar o efeito de soluções antioxidantes na resistência à fratura e resistência de união em dentes tratados endodonticamente e clareados (38% de peróxido de hidrogênio). Cento e oitenta espécimes de dentina foram obtidos, 60 para cada teste: resistência à fratura, espessura da camada híbrida e resistência de união. Os grupos (n=10) foram compostos aleatoriamente de acordo com o protocolo pós-clareamento: REST - restauração, sem clareamento; BL - clareamento + restauração; SA - clareamento, solução de ascorbato de sódio a 10% e restauração; AT - clareamento, solução de α-tocoferol a 10% e restauração; CRAN - clareamento, solução de cranberry a 5% e restauração; CAP - clareamento, solução de capsaicina 0,0025% e restauração. Os dados foram analisados ​​com os testes ANOVA, Kruskal-Wallis, Dunn e Qui-Quadrado (α=0,05). Os maiores valores de resistência à fratura foram observados em REST (1508,96 ±148,15 N), sem diferença significativa para os grupos clareados (p>0,05), independente do uso de antioxidantes. A espessura da camada híbrida no grupo que não foi submetido ao clareamento (REST) foi significativamente maior do que em qualquer outro grupo. A resistência de união nos grupos clareado e tratado com antioxidantes (SA, AT, CRAN, CAP) não apresentou diferenças com o grupo branqueado sem antioxidantes (BL). As falhas adesivas foram predominantes nos grupos que não receberam a aplicação do antioxidante. Em conclusão, os antioxidantes avaliados não mostraram efeito sobre a resistência à fratura, espessura da camada híbrida ou resistência de união à dentina clareada após tratamento endodôntico. A aplicação de soluções de ascorbato de sódio 10%, alfa-tocoferol 10%, cranberry 5% ou capsaicina 0,0025% não é uma etapa eficaz e não deve ser considerada para os protocolos restauradores após clareamento não vital.

Anti-erosion effect of an experimental varnish on eroded dentin.

This in vitro study evaluated the effect of an experimental varnish containing 20% nano-hydroxyapatite (nHAP) associated with 5% stannous chloride (SnCl2) against erosive-abrasive wear on bovine dentin. Samples of bovine cervical dentin were pre-eroded (0.3% citric acid, pH 2.6 for 10 minutes) and randomized into 4 groups (n=10): Control group - experimental varnish without active ingredient (CG); experimental varnish containing 20% nHAP (nHG); experimental varnish containing 5% SnCl2 (24.800 ppm Sn2+) (SnG); experimental varnish containing 20% nHAP associated with 5% SnCl2 (18.300 ppm Sn2+) (nHSnG). After applying the materials, the erosive-abrasive challenges were performed for five days. Erosive dentin loss and analysis of the pattern of dentinal obliteration were performed by 3D confocal laser microscopy. A one-way ANOVA/Bonferroni test was performed to analyze the data (α=0.05). The SnG and nHSnG experimental groups presented more effectiveness in preventing erosive wear when compared to the other groups (p<0.05). There was no statistically significant difference between the SnG and nHSnG groups (p = 0.731) in tooth structure dentin loss. Regarding the amount of open dentinal tubules, the highest amount of obstructed dentinal tubules was demonstrated in SnG and nHSnG (p < 0.05) when compared to the others. Between SnG and nHSnG there was no significant difference (p = 0.952) in the amount of closed dentinal tubules in the dentin. Experimental varnishes containing 5% SnCl2 associated or not with 20% nHAP showed to be a promising strategy in preventing erosive-abrasive wear of dentin. In addition, nHSnG was able to obliterate dentinal tubules.

Anti-erosion effect of an experimental varnish on eroded dentin

Abstract This in vitro study evaluated the effect of an experimental varnish containing 20% nano-hydroxyapatite (nHAP) associated with 5% stannous chloride (SnCl2) against erosive-abrasive wear on bovine dentin. Samples of bovine cervical dentin were pre-eroded (0.3% citric acid, pH 2.6 for 10 minutes) and randomized into 4 groups (n=10): Control group - experimental varnish without active ingredient (CG); experimental varnish containing 20% nHAP (nHG); experimental varnish containing 5% SnCl2 (24.800 ppm Sn2+) (SnG); experimental varnish containing 20% nHAP associated with 5% SnCl2 (18.300 ppm Sn2+) (nHSnG). After applying the materials, the erosive-abrasive challenges were performed for five days. Erosive dentin loss and analysis of the pattern of dentinal obliteration were performed by 3D confocal laser microscopy. A one-way ANOVA/Bonferroni test was performed to analyze the data (α=0.05). The SnG and nHSnG experimental groups presented more effectiveness in preventing erosive wear when compared to the other groups (p<0.05). There was no statistically significant difference between the SnG and nHSnG groups (p = 0.731) in tooth structure dentin loss. Regarding the amount of open dentinal tubules, the highest amount of obstructed dentinal tubules was demonstrated in SnG and nHSnG (p < 0.05) when compared to the others. Between SnG and nHSnG there was no significant difference (p = 0.952) in the amount of closed dentinal tubules in the dentin. Experimental varnishes containing 5% SnCl2 associated or not with 20% nHAP showed to be a promising strategy in preventing erosive-abrasive wear of dentin. In addition, nHSnG was able to obliterate dentinal tubules.

Resumo Este estudo in vitro avaliou o efeito de um verniz experimental contendo 20% de nano-hidroxiapatita (nHAP) associado a 5% de cloreto estanoso (SnCl2) contra o desgaste erosivo-abrasivo da dentina bovina. As amostras de dentina cervical bovina foram pré-erodificadas (0,3% de ácido cítrico, pH 2,6 durante 10 minutos) e aleatorizadas em 4 grupos (n=10): Grupo controle - verniz experimental sem ingrediente ativo (GC); verniz experimental contendo 20% nHAP (GnH); verniz experimental contendo 5% SnCl2 (24.800 ppm Sn2+) (GSn); verniz experimental contendo 20% nHAP associado a 5% SnCl2 (18.300 ppm Sn2+) (GnHSn). Após a aplicação dos materiais, os desafios erosivo-abrasivos foram realizados durante cinco dias. Perda de dentina erosiva e análise do padrão de obliteração dentinária foram realizadas por microscopia laser confocal 3D. Foi realizado o teste ANOVA/Bonferroni unidireccional para analisar os dados (α=0,05). Os grupos experimentais GSn e GnHSn apresentaram maior eficácia na prevenção do desgaste erosivo quando comparados com os outros grupos (p<0,05). Não houve diferença estatisticamente significativa entre os grupos GSn e GnHSn (p = 0,731) na perda de dentina da estrutura dentária. Relativamente à quantidade de túbulos dentinários abertos, a maior quantidade de túbulos dentinários obstruídos foi demonstrada em GSn e GnHSn (p < 0,05) quando comparada com os outros grupos. Entre GSn e GnHSn, não houve diferença significativa (p = 0,952) na quantidade de túbulos dentinários fechados na dentina. Os vernizes experimentais contendo 5% de SnCl2 associados ou não a 20% de nHAP mostraram ser uma estratégia promissora na prevenção do desgaste erosivo-abrasivo da dentina. Além disso, o GnHSn conseguiu obliterar os túbulos dentinários.

Solução estética conservadora em paciente jovem com fluorose: clareamento e microabrasão: relato de caso / Conservative aesthetic solution in a young patient with fluorosis: whitening and microabrasion: case report

Introdução: a fluorose constitui uma patologia que afeta os dentes desencadeada pelo excesso de ingestão de flúor. Sua manifestação ocorre a nível de esmalte na presença de manchas ou defeitos anatômicos. Objetivo: relatar o manejo clínico de um paciente com fluorose tratado com procedimento minimamente invasivo. Relato do caso: paciente do sexo feminino, 18 anos, apresentando queixas estéticas clinicamente observadas na vestibular dos dentes, com diagnóstico de lesões fluoróticas. Foi executado protocolo de dessensibilização com Ultra EZ por 5 min e aplicação do Verniz (Enamelast Fluoride) previamente ao tratamento clareador. Foram realizados duas sessões de clareamento com peróxido de hidrogenio 35% (DMC) por 45 min com intervalo de sete dias entre elas. Imediatamente após a segunda sessão de clareamento, foi realizado microabrasão com pasta abrasiva Whitness RM (FGM) e taça de borracha com fricção por 20 segundos. Resultados: o tratamento clareador associado a técnica da microabrasão do esmalte demonstrou resultado estético favorável, microinvasivo e eficaz no tratamento da fluorose. Conclusão: a associação dos tratamentos resolveu o problema estético da paciente de forma rápida e segura, conservando a estrutura dentária.

Introduction: fluorosis is a pathology that affects teeth triggered by excess fluoride intake. Its manifestation occurs at the enamel level in the presence of stains or anatomical defects. Objective: to report the clinical management of a patient with fluorosis treated with a minimally invasive procedure. Case report: female patient, 18 years old, presenting aesthetic complaints clinically observed in the buccal of the teeth, with a diagnosis of fluorotic lesions. A desensitization protocol was performed with Ultra EZ for 5 min and Varnish (Enamelast Fluoride) was applied prior to the bleaching treatment. Two bleaching sessions were performed with 35% hydrogen peroxide (DMC) for 45 min, with an interval of seven days between them. Immediately after the second bleaching session, microabrasion was performed with Whitness RM abrasive paste (FGM) and a rubber cup with friction for 20 seconds. Results: The bleaching treatment associated with the enamel microabrasion technique demonstrated a favorable, microinvasive and effective esthetic result in the treatment of fluorosis. Conclusion: the combination of treatments solved the patient's aesthetic problem quickly and safely, preserving the dental structure.

Anti-erosive profile of an experimental 5% SnCl2 varnish containing different concentrations of NaF.

This in vitro study evaluated the anti-erosive effect of an experimental varnish containing 5% stannous chloride (SnCl2) associated with different concentrations of NaF (NaF-free, 2.5% NaF, or 5.2% NaF) on bovine enamel and root dentin. One hundred samples were pre-eroded (0.3% citric acid, pH 2.6, 10 min) and randomized into five groups (n=10 for each substrate): Negative control - milli-Q water; NaF-free - Experimental varnish SnCl2-free and NaF-free; 2.5 NaF - Experimental varnish 5% SnCl2 associated with 2.5% NaF; 5.2 NaF: Experimental varnish 5% SnCl2 associated with 5.2% NaF and positive control - Commercial varnish containing 5% NaF (Duraphat). After the varnishes were applied, the erosive and abrasive challenges were carried out for five days. Loss of tooth structure (TSL) was determined by optical profilometry, and the loss of calcium (ΔCa2+) using atomic absorption spectroscopy. Dentin analysis was also performed by SEM. A one-way ANOVA/Bonferroni test was performed to analyze the data (α=0.05). The experimental 2.5 NaF and 5.2 NaF groups showed greater effectiveness in preventing TSL when compared to the other groups (p <0.05), regardless of the substrate. In addition, these groups showed lower loss in Ca2+ content when compared to the other groups (p <0.05), for enamel and dentin. Dentin showed greater TSL and ΔCa2+ loss when compared to enamel in all treatments (p <0.05). The 5.2% and 2.5% NaF-containing experimental varnishes showed promising results in both, the prevention of TSL and the loss of Ca2+, regardless of the substrate studied.

Bond strength and internal adaptation of customized glass fiber posts using different bulk-fill flow resins.

Background: This study aimed to evaluate the bond strength and internal adaptation of customized glass fiber posts using Bulk Fill flowable composite resins (BF) and conventional composite resin. Material and Methods: Fifty bovine teeth were randomly divided (n=10) according to the following groups: G1 (control): glass fiber posts were adapted to the root canal and luted with Rely-X ARC cement (3M® ESPE); G2: fiber posts smaller than the root canal diameter were customized using Filtek™ Z350 XT (3M® ESPE) conventional composite resin, and luted similarly to Group 1. G3: posts were customized with Tetric N-Ceram Bulk Fill composite resin (Ivoclar Vivadent AG), G4: posts were customized with Filtek™ Bulk Fill Flow (3M® ESPE), and G5: posts were customized with SureFil SDRTM flow (DENTSPLY), respectively. The specimens were submitted to push-out testing and internal adaptation evaluation using optical microscopy. Push-out (MPa) and internal adaptation (%) data were subjected to ANOVA and Tukey's post-hoc tests (p = 5%). Results: No statistically significant differences were found in both evaluations (p<0.05). Conclusions: Customized glass fiber posts using different bulk fill flowable composites did not affect the post bond-strength and internal adaptation, presenting similar results to customized glass fiber posts using conventional composite or posts with no previous customization. Key words:Dental pulp, composite resins, fiber posts, glass fiber post.

Anti-erosive profile of an experimental 5% SnCl₂ varnish containing different concentrations of NaF

Abstract This in vitro study evaluated the anti-erosive effect of an experimental varnish containing 5% stannous chloride (SnCl₂) associated with different concentrations of NaF (NaF-free, 2.5% NaF, or 5.2% NaF) on bovine enamel and root dentin. One hundred samples were pre-eroded (0.3% citric acid, pH 2.6, 10 min) and randomized into five groups (n=10 for each substrate): Negative control - milli-Q water; NaF-free - Experimental varnish SnCl₂-free and NaF-free; 2.5 NaF - Experimental varnish 5% SnCl₂ associated with 2.5% NaF; 5.2 NaF: Experimental varnish 5% SnCl₂ associated with 5.2% NaF and positive control - Commercial varnish containing 5% NaF (Duraphat). After the varnishes were applied, the erosive and abrasive challenges were carried out for five days. Loss of tooth structure (TSL) was determined by optical profilometry, and the loss of calcium (ΔCa2+) using atomic absorption spectroscopy. Dentin analysis was also performed by SEM. A one-way ANOVA/Bonferroni test was performed to analyze the data (α=0.05). The experimental 2.5 NaF and 5.2 NaF groups showed greater effectiveness in preventing TSL when compared to the other groups (p <0.05), regardless of the substrate. In addition, these groups showed lower loss in Ca2+ content when compared to the other groups (p <0.05), for enamel and dentin. Dentin showed greater TSL and ΔCa2+ loss when compared to enamel in all treatments (p <0.05). The 5.2% and 2.5% NaF-containing experimental varnishes showed promising results in both, the prevention of TSL and the loss of Ca2+, regardless of the substrate studied.

Resumo Este estudo in vitro avaliou o efeito anti-erosivo de um verniz experimental contendo 5% de cloreto estanoso (SnCl₂) associado a diferentes concentrações de NaF (sem NaF, 2,5% NaF ou 5,2% NaF) sobre esmalte e dentina radicular bovinos. Cem amostras foram pré-erodidas (ácido cítrico 0,3%, pH 2,6, 10 min) e randomizadas em cinco grupos (n=10 para cada substrato): Controle negativo - água milli-Q; Sem NaF - Verniz experimental sem SnCl2 e sem NaF; 2,5 NaF - Verniz experimental 5% SnCl2 associado a 2,5% NaF; 5,2 NaF: Verniz experimental 5% SnCl2 associado a 5,2% NaF e controle positivo - Verniz comercial contendo 5% NaF (Duraphat). Após a aplicação dos vernizes, os desafios erosivos e abrasivos foram realizados por cinco dias. A perda de estrutura dentária (PED) foi determinada por perfilometria óptica e a perda de cálcio (ΔCa2+) por espectroscopia de absorção atômica. A análise da dentina também foi realizada por MEV. Um teste ANOVA/Bonferroni de uma via foi realizado para analisar os dados (α=0,05). Os grupos experimentais 2,5 NaF e 5,2 NaF apresentaram maior eficácia na prevenção de PED quando comparados aos demais grupos (p<0,05), independentemente do substrato. Além disso, esses grupos apresentaram menor perda no teor de Ca2+ quando comparados aos demais grupos (p<0,05), para esmalte e dentina. A dentina apresentou maior PED e de ΔCa2+ quando comparada ao esmalte em todos os tratamentos (p<0,05). Os vernizes experimentais contendo NaF 5,2% e 2,5% apresentaram resultados promissores tanto na prevenção de PED quanto na perda de Ca2+, independente do substrato estudado.

Effect of the several epoxy resin-based sealer compositions on adhesion interface in radicular dentin after calcium hydroxide intracanal medication removal.

BACKGROUND: This study evaluated the effects of several epoxy resin-based sealer compositions (AHP, AH Plus; ADS, Adseal; SPL, Sealer Plus) on bond strength and intratubular dentin penetration of the endodontic obturation, in root canal previously treated with calcium hydroxide intracanal medication (CH) and removed by continuous ultrasonic irrigation (CUI). MATERIAL AND METHODS: Forty-five maxillary canines were prepared up to F5 (ProTaper system), filled with CH, coronally sealed, and stored at 37ºC. After 1 week, CH was removed using 2.5% sodium hypochlorite energized by CUI. The specimens were randomly distributed in three groups (n=15) and root canal obturated, according to epoxy-based resin sealer composition (AHP, ADS or SPL). The roots were transversally sectioned in cervical, middle, and apical thirds. In each radicular third, push out bond strength using universal machine and intratubular dentin using confocal laser scanning microscopy (CLSM) and Image J Program were evaluated. Bond strength and intratubular dentin penetration were statistically evaluated by ANOVA one-way and Tukey tests and Kruskal Wallis test, respectively (α = 0.05). RESULTS: In middle and apical thirds, AHP showed higher bond strength values (p<0.05), and ADS and SPL were similar each other (p>0.05). All epoxy resin-based sealers presented similar intratubular dentin penetration, independently of the radicular thirds (p>0.05). Cohesive and mixed failures were predominant in the cervical thirds. In the middle and apical thirds, AHP showed more cohesive type failures, while ADS and SPL showed more adhesive-type failures. CONCLUSIONS: AHP has the highest bond strength in middle and apical radicular thirds, after calcium hydroxide intracanal medication removal using continuous ultrasonic irrigation, although intratubular dentin infiltration being similar among epoxy resin-based sealer with several chemical composition. Key words:Continuous ultrasonic irrigation, endodontic sealers, epoxy resin-based sealers, root canal obturation.

Antimicrobial activity of probiotics against oral pathogens around orthodontic mini-implants: an in vitro study.

OBJECTIVE: The aim of this in vitro study was to evaluate the antimicrobial effect of five types of non-industrialized and industrialized probiotics on biofilms formed around orthodontic mini-implants. The null hypothesis tested was: there is no difference in the antimicrobial effect between the five types of probiotics tested around orthodontic mini-implants. METHODS: For the experiment, 120 mini-implants were immersed for seven days in Staphylococcus aureus solution for biofilm formation, and were subsequently plated in culture medium containing probiotics. The mini-implants were divided into six different groups, according to the probiotic used: G1)Lactobacillus casei; G2)Lactobacillus brevis; G3)Lactobacillus rhamnosus; G4) Lactobacillus from fermented milk Yakult®; G5) Lactobacillus from fermented milk Batavito® and G6) without use of probiotic, as negative control. Qualitative and quantitative analyses of all groups were performed using the CFU (colony forming unit) count. RESULTS: The study showed that groups G4 and G6 did not present antimicrobial activity, in comparison to groups G1, G2, G3, and G5 (p< 0.05), which demonstrated antimicrobial activity. CONCLUSION: The non-commercial probiotic bacteria, Lactobacillus casei and Lactobacillus rhamnosus, as well as commercially available fermented milk Batavito® presented promising results in the reduction of colonization of mini-implants by S. aureus. Therefore, the null hypothesis was rejected.

Effect of Sodium Ascorbate or Alpha-Tocopherol on the Resin-Dentin Interface and Bond Strength after Endodontic Treatment and Bleaching / Efecto del Ascorbato de Sodio o Alfa-Tocoferol sobre la Interfaz Resina-Dentina y la Fuerza de Unión Después del Tratamiento de Endodoncia y Blanqueamiento

The objective of this in vitro study was to assess the effects of two antioxidants (sodium ascorbate [SA] and alpha-tocopherol [AT]) on the adhesive interface and dentin bond strength immediately after bleaching with 38 % hydrogen peroxide (38HP) in endodontically-treated teeth. Two stages of experimentation were carried out. Bovine incisors were allocated into four groups (n = 10/group for each experiment): NB, non-bleached restored crowns; 38HP, bleached and immediately restored crowns; 38HP-SA, bleached crowns and SA use; and 38HP-AT, bleached crowns and AT use. Hybrid layer length in dentin (μm) and bond strength (MPa) were assessed with confocal microscopy laser and micro-shear bond strength (μSBS) test, respectively. Failure mode was determined by stereomicroscope. Data analysis was performed with analysis of variance (ANOVA) and Kruskal-Wallis, Dunn, Tukey, and Fisher-exact tests (a = 0.05). Higher values of hybrid layer length were observed similarly in the NB and 38HP-SA groups. The highest μSBS mean values were observed in the NB group (18 .51 ? 1.33), whereas the SBS values for 38HP-AT (1.68 ? 0.32) were similar to the 38HP group (1.61 ? 0.51) (p > 0.05) and significantly lower than the 38HP-SA group (5.78 ? 0.71). Adhesive failures were predominant in the 38HP and 38HP-AT groups. Cohesive and mixed failures were mostly observed in the NB and 38HP-SA groups, respectively. In conclusion, AT has no immediate effect on the hybrid layer formation and μSBS of dentin. Although SA promotes an increase in hybrid layer formation, it was not reflected in the μSBS values.

El objetivo de este estudio in vitro fue evaluar los efectos de dos antioxidantes (ascorbato de sodio [AS] y alfa-tocoferol [AT]) sobre la interfaz adhesiva y la fuerza de unión de la dentina inmediatamente después del blanqueamiento con peróxido de hidrógeno al 38 % (38HP) en endodoncia. -Dientes tratados. Se llevaron a cabo dos etapas de experimentación. Los incisivos bovinos se dividieron en cuatro grupos (n = 10 / grupo para cada experimento): NB, coronas restauradas no blanqueadas; 38HP, coronas blanqueadas y restauradas inmediatamente; 38HP- AS, coronas blanqueadas y uso SA; y 38HP-AT, coronas blanqueadas y uso de AT. La longitud de la capa híbrida en dentina (μm) y la fuerza de unión (MPa) se evaluaron con láser de microscopía confocal y la prueba de fuerza de unión por micro-cizallamiento (μSBS), respectivamente. El modo de falla se determinó mediante estereomicroscopio. El análisis de los datos se realizó con análisis de varianza (ANOVA) y pruebas de Kruskal-Wallis, Dunn, Tukey y Fisher (α = 0,05). De manera similar, se observaron valores más altos de longitud de capa híbrida en los grupos NB y 38HP-AS. Los valores medios más altos de μSBS se observaron en el grupo NB (18,51 ? 1,33), mientras que los valores de SBS para 38HP-AT (1,68 ? 0,32) fueron similares a los del grupo 38HP (1,61 ? 0,51) (p> 0,05) y significativamente más bajos que el grupo 38HP-AS (5,78 ? 0,71). Las fallas adhesivas fueron predominantes en los grupos de 38HP y 38HP-AT. Las fallas cohesivas y mixtas se observaron principalmente en los grupos NB y 38HP-AS, respectivamente. En conclusión, la AT no tiene un efecto inmediato sobre la formación de la capa híbrida y el μSBS de dentina. Aunque AS promueve un aumento en la formación de capas híbridas, no se refleja en los valores de μSBS.

Factors associated with depression, anxiety and stress among dentists during the COVID-19 pandemic.

The objective of this work was to evaluate the relationship between factors associated with the COVID-19 pandemic and depression, anxiety, and stress (DAS) in dentists. Factors associated with the COVID-19 pandemic were evaluated using a questionnaire and scores of the Depression, Anxiety, and Stress Scales-21 were measured. The differences between the DAS scores based on the factors associated with the COVID-19 pandemic were tested through the successive application of multivariate analysis of variance (MANOVA, α = 0.05). After a sample size calculation, 998 participants with a mean age of 39.39 (± 11.69) years were included. The effect size indicated that changes in sleep quality (η2 = 0.161), eating habits (η2 = 0.057), and physical health (η2 = 0.051) were the ones that most negatively affected DAS scores. The highest DAS scores were observed in professionals who lived with someone at high-risk for COVID-19 (p < 0.001) and in those who did not engage in leisure activities during the pandemic (p < 0.001). Dentists who worked on the frontline against COVID-19 had higher scores of anxiety and stress (p = 0.029). The highest scores for anxiety, depression, and/or stress were seen in dentists living with someone at high-risk for COVID-19, who acts on the frontline, who does not practice in leisure activities during the pandemic, who completely changed eating habits, quality of sleep and physical health during the pandemic. In general, DAS levels of dentists were associated with factors related to the COVID-19 pandemic.

Effect of post-space irrigation with acid solutions on bond strength and dentin penetrability using a self-adhesive cementation system.

BACKGROUND: The aim of this study was to evaluate the effects of surface treatments with 1% peracetic acid (PA), solution containing 17% EDTA (SmearClear, Kerr Endodontics), solution containing a combination of 17% EDTA with 2% chlorhexidine (QMix, Dentsply Sirona) on the post-space root dentin compared to 2.5% sodium hypochlorite (NaOCl) on bond strength and resin tags length in dentin. MATERIAL AND METHODS: Forty human-canine roots were endodontically treated and the post space was prepared. The specimens were randomised into four groups (n = 10): control - irrigation with 2.5% NaOCl solution, PA - irrigation with 1% PA, SmearClear - irrigation with SmearClear solution, and QMix - irrigation with QMix solution. The fibre posts were cemented using a self-adhesive resin system (Relyx U200, 3M ESPE). After six months, the specimens were cross-sectioned and subjected to push-out and confocal laser microscopy tests. One-way ANOVA and Tukey's tests were used to analyse the data (α= 0.05). RESULTS: PA and QMix presented the highest bond strength values compared to the other groups (p< 0.05). There was no significant difference between the resin tags length in dentin by the groups (p = 0.75). CONCLUSIONS: Irrigation of the post space with 1% PA and QMix showed a positive clinical impact on the adhesion between the fiber post and root dentin. However, these materials had no influence on resin tags length in dentin by self-adhesive resin cement. Key words:Fiber post, adhesive cementation, self-adhesive resin cement, root dentin, irrigating solutions.

Evaluation of various methods of methylene blue removal from the post space after photodynamic therapy on the bonding interface using different resin cementation systems.

BACKGROUND: To evaluate the effects of three protocols for removing 0.01 % methylene blue from the post space after photodynamic therapy on bond strength and tag formation in the dentin of the fiber post space, using a conventional cementation system with an etch-and-rinse or universal adhesive system. METHODS: Sixty human canines were endodontically treated for fiber post cementation. The specimens were randomized into 6 groups (n = 10): G1, G2, G3, G4, G5, and G6. The G1, G2, and G3 groups were irrigated with saline solution, 2.5 % sodium hypochlorite (NaOCl), and 2.5 % NaOCl, agitated by passive ultrasonic irrigation (PUI), respectively. In these groups, a conventional cementation system with etch-and-rinse adhesive was used. The G4, G5, and G6 groups were irrigated with the respective solutions mentioned above and cemented using a conventional cementation system with universal adhesive. Tag formation in the dentin was evaluated by confocal laser scanning microscopy. The push-out bond strength test was performed on three thirds of the specimens. RESULTS: In the cervical and middle thirds, the greatest extent of dentin tag formation occurred in the G1 (p = 0.023 and p = 0.033, respectively). In the apical third, G1, G2, and G3 demonstrated similar tag formation between themselves (p = 0.089). In the cervical and middle thirds, G4 demonstrated the highest bond strength when compared to the other groups (p < 0.05). CONCLUSION: The protocols for removing 0.01 % methylene blue with NaOCl, irrespective of the involvement of passive ultrasonic irrigation, negatively effects the bond strength and tag formation in the dentin of the post space.

Molars Fracture Resistance with Class II Cavities Restored with Different Resin - Based Materials / Resistência à Fratura de Molares com Cavidades Classe II Restauradas com Diferentes Materiais à Base de Resina

The teeth weakening due to the preparation of class II mesio-occluso-distal cavities is a challenge for the clinician. The objective of this study was to evaluate the molars fracture resistance with class II mesio-occluso distal cavities restored with different restorative techniques and materials. Forty extracted molars were divided into 5 groups: Group 1 ­ intact healthy teeth (positive control); Group 2 ­ unrestored teeth with mesio-occluso distal class II cavities (negative control); Groups 3 to 5 ­ restored teeth with standardized dimensions. In groups 3 to 5, the cavities were restored with flow resin only, flow resin coated with a nano-hybrid resin, and nano-hybrid resin only, respectively. All specimens were tested for resistance to fracture using an axial compressive load, a metallic sphere measuring 8 mm in diameter on a universal testing machine EMIC DL-2000. A 10 kN load cell operated at a speed of 5 mm/min until the tooth fracture. Data were subjected to analysis of variance and Tukey's tests (α = 0.05). Group 3 showed higher fracture strength (2243.1 ± 473.7N) when compared to groups 2, 4 and 5. This difference was statistically significant (p<0.05). The fracture strength of teeth restored with flow mesio occluso-distal restorations was similar to that of intact natural teeth. (AU)

O enfraquecimento dos dentes devido às preparações de cavidades mesio-ocluso-distal é um desafio para o clínico. O objetivo deste estudo foi avaliar a resistência à fratura de molares com cavidades mesio-ocluso-distais classe II restauradas com diferentes técnicas e materiais restauradores. Quarenta molares extraídos foram divididos em 5 grupos: Grupo 1 ­ dentes saudáveis intactos (controle positivo); Grupo 2 ­ dentes não restaurados com cavidades mesio-occluso-distais classe II (controle negativo); Grupos 3 a 5 ­ dentes restaurados com dimensões padronizadas. Nos grupos 3 a 5, as cavidades foram restauradas apenas com resina flow, resina flow recoberta com uma resina nanohíbrida e somente resina nano-híbrida, respectivamente. Todas as amostras foram testadas quanto à resistência à fratura usando uma carga compressiva axial, usando uma esfera metálica medindo 8 mm de diâmetro em uma máquina de teste universal EMIC DL-2000. Uma célula de carga de 10 kN operava a uma velocidade de 5 mm/min até a fratura do dente. Os dados foram submetidos à análise de variância e testes de Tukey (α = 0,05). O grupo 3 apresentou maior resistência à fratura (2243,1 ± 473,7N) quando comparado aos grupos 2, 4 e 5. Essa diferença foi estatisticamente significante (p <0,05). A resistência à fratura dos dentes restaurados com resina flow foi semelhante à dos dentes naturais intactos. (AU)

Antimicrobial activity of probiotics against oral pathogens around orthodontic mini-implants: an in vitro study

ABSTRACT Objective: The aim of this in vitro study was to evaluate the antimicrobial effect of five types of non-industrialized and industrialized probiotics on biofilms formed around orthodontic mini-implants. The null hypothesis tested was: there is no difference in the antimicrobial effect between the five types of probiotics tested around orthodontic mini-implants. Methods: For the experiment, 120 mini-implants were immersed for seven days in Staphylococcus aureus solution for biofilm formation, and were subsequently plated in culture medium containing probiotics. The mini-implants were divided into six different groups, according to the probiotic used: G1)Lactobacillus casei; G2)Lactobacillus brevis; G3)Lactobacillus rhamnosus; G4) Lactobacillus from fermented milk Yakult®; G5) Lactobacillus from fermented milk Batavito® and G6) without use of probiotic, as negative control. Qualitative and quantitative analyses of all groups were performed using the CFU (colony forming unit) count. Results: The study showed that groups G4 and G6 did not present antimicrobial activity, in comparison to groups G1, G2, G3, and G5 (p< 0.05), which demonstrated antimicrobial activity. Conclusion: The non-commercial probiotic bacteria, Lactobacillus casei and Lactobacillus rhamnosus, as well as commercially available fermented milk Batavito® presented promising results in the reduction of colonization of mini-implants by S. aureus. Therefore, the null hypothesis was rejected.

RESUMO Objetivo: O objetivo do presente estudo in vitro foi avaliar o efeito antimicrobiano de cinco tipos de probióticos não industrializados ou industrializados em biofilmes formados ao redor de mini-implantes ortodônticos. A hipótese nula testada foi: não há diferença no efeito antimicrobiano entre os cinco tipos de probióticos testados em torno dos mini-implantes ortodônticos. Métodos: Para o experimento, as cabeças de 120 mini-implantes foram imersas por sete dias em solução de Staphylococcus aureus para formação de biofilme e, posteriormente, semeadas em meio de cultura contendo probióticos. Os mini-implantes foram divididos em seis grupos diferentes, de acordo com o probiótico utilizado: G1)Lactobacillus casei; G2)Lactobacillus brevis; G3)Lactobacillus rhamnosus; G4) lactobacilos do leite fermentado Yakult®; G5) lactobacilos do leite fermentado Batavito®; e G6) sem uso de probiótico, como controle negativo. As análises qualitativas e quantitativas de todos os grupos foram realizadas usando a contagem de UFCs (unidades formadoras de colônia). Resultados: O estudo mostrou que os grupos G4 e G6 não apresentaram atividade antimicrobiana, em comparação aos grupos G1, G2, G3 e G5 (p< 0,05), os quais demonstraram atividade antimicrobiana. Conclusão: As bactérias probióticas não comerciais, Lactobacillus casei e Lactobacillus rhamnosus, assim como o leite fermentado comercializado, Batavito®, apresentaram resultados promissores na redução da colonização dos mini-implantes por S. aureus. Portanto, a hipótese nula foi rejeitada.

Factors associated with depression, anxiety and stress among dentists during the COVID-19 pandemic

Abstract The objective of this work was to evaluate the relationship between factors associated with the COVID-19 pandemic and depression, anxiety, and stress (DAS) in dentists. Factors associated with the COVID-19 pandemic were evaluated using a questionnaire and scores of the Depression, Anxiety, and Stress Scales-21 were measured. The differences between the DAS scores based on the factors associated with the COVID-19 pandemic were tested through the successive application of multivariate analysis of variance (MANOVA, α = 0.05). After a sample size calculation, 998 participants with a mean age of 39.39 (± 11.69) years were included. The effect size indicated that changes in sleep quality (η2 = 0.161), eating habits (η2 = 0.057), and physical health (η2 = 0.051) were the ones that most negatively affected DAS scores. The highest DAS scores were observed in professionals who lived with someone at high-risk for COVID-19 (p < 0.001) and in those who did not engage in leisure activities during the pandemic (p < 0.001). Dentists who worked on the frontline against COVID-19 had higher scores of anxiety and stress (p = 0.029). The highest scores for anxiety, depression, and/or stress were seen in dentists living with someone at high-risk for COVID-19, who acts on the frontline, who does not practice in leisure activities during the pandemic, who completely changed eating habits, quality of sleep and physical health during the pandemic. In general, DAS levels of dentists were associated with factors related to the COVID-19 pandemic.

Effect of desensitizing agents on dentin hypersensitivity after non-surgical periodontal therapy: A systematic review and meta-analysis.

OBJECTIVE: To investigate the effectiveness of desensitizing agents (DA) on dentin hypersensitivity (DH) after non-surgical periodontal treatment (NSPT) through a systematic review and meta-analysis. DATA: The PICO strategy was used to include randomized clinical trials in human subjects with DH (P) after NSPT treated with DA (I) compared to those treated with placebo or control (C) to identify DH relief (O). The Cochrane guidelines and GRADE was used to classify the risk of bias and the quality of the evidence, respectively. SOURCES: PubMed, Web of Science, Scopus, Lilacs, Cochrane Library databases, and OpenGrey were searched on the 20th of May 2020. STUDY SELECTION: Nine studies were included in the quantitative synthesis. Five meta-analyses were performed. Three meta-analyzes assessed the effectiveness of DA compared to a placebo or control in relation to pain assessment stimuli and two meta-analyzes assessed the mechanism of action of DA. For the mechanical stimulus in overall analysis, the control group presented a higher mean of pain reduction (SMD 1.03 [0.73, 1.32], p < 0.001) with very low certainty of evidence. For water (SMD -0.78 [-1.22, -0.35], p = 0.0009) and evaporative in overall analysis (SMD -1.21 [-1.79, -0.64], p < 0.001) stimuli, the DA decreased DH pain with very low and low certainty of evidence, respectively. CONCLUSION: Due to the limited quality of evidence, there is no definitive conclusion on the effectiveness of DA on DH after NSPT. Thus, further clinical studies with a low risk of bias and high-quality evidence are encouraged to reinforce the certainty of evidence on that issue. CLINICAL SIGNIFICANCE: The use of desensitizing agents show promise for relief of dentin hypersensitivity after non-surgical periodontal therapy.

Assessment of Marginal Adaptation Before and After Thermo-Mechanical Loading and Volumetric Shrinkage: Bulk Fill versus Conventional Composite / Evaluación de la Adaptación Marginal Antes y Después de la Carga Termomecánica y la Contracción Volumétrica: Relleno Bulk-Fill- versus Compuesto Convencional

ABSTRACT: The objective of the study was to evaluate marginal adaptation of Class II mesial-occlusal-distal (MOD) restorations before and after thermo-mechanical loading and volumetric shrinkage of the bulk-fill vs conventional composite resin. For marginal adaptation assessment, 24 Class II MOD cavities with cervical margins extending 1.0 mm below (distal) and 1.0 mm beyond (mesial) the cement-enamel junction were prepared in extracted human molars. The teeth were filled as follows: Group A - bulk-fill with SureFil SDR flow (first increment, 4 mm; second increment, 2 mm); Group B - bulk-fill with SureFil SDR flow as a base (first increment, 4 mm) and covered with the conventional nanohybrid composite Esthet-X HD (second increment, 2 mm); and Group C - incrementally filled with Esthet-X HD. Marginal adaptation was evaluated by scanning electron microscopy before and after thermomechanical loading (240,000 loading cycles and simultaneous 600 thermal cycles). To evaluate volumetric polymerization shrinkage, a semi-spherical mold was filled with the tested composites and placed in an AccuVol device after light curing. Both before and after loading, marginal adaptation in cervical dentin was superior (p < 0.05) for Groups A and B compared with Group C. In cervical enamel, Group B showed better marginal adaptation than Group C, and Group A presented intermediary results, between Groups B and C. Furthermore, bulk-fill flow resulted in greater shrinkage than Esthet-X HD. A significant improvement of marginal adaptation was observed when bulkfill flow was used instead of conventional composite resin both before and after thermomechanical loading. However, the bulk-fill flow presented higher volumetric polymerization shrinkage than the conventional composite.

RESUMEN: El objetivo de este trabajo consistió en evaluar la adaptación marginal de las restauraciones mesiales-oclusales-distales (MOD) de Clase II antes y después de la carga termo-mecánica y la contracción volumétrica de la carga compuesta de resina "bulk-fill" en comparación con resina convencional. Para la evaluación de adaptación, se prepararon 24 cavidades MOD de Clase II en molares humanos extraídos, los que se restauraron de la siguiente manera: Grupo A: restaurado con resina fluida Bulk-Fill SureFilSDR (primer incremento, 4 mm; segundo incremento, 2 mm); Grupo B: restaurado con resina fluida Bulk-Fill SureFil SDR (primer incremento, 4 mm) y cubierto con resina compuesta nanohíbrida Esthet-X HD (segundo incremento, 2 mm); y Grupo C - rellenado incrementalmente con Esthet-X HD. La adaptación marginal se evaluó mediante microscopía electrónica de barrido antes y después de la carga termomecánica (240.000 ciclos de carga y 600 ciclos térmicos simultáneos). Para evaluar la contracción volumétrica de la polimerización, se llenó un molde semiesférico con los compuestos probados y se colocó en un dispositivo AccuVol después del fotopolimerización. Tanto antes como después de la carga, la adaptación marginal en la dentina cervical fue superior (p <0,05) para los grupos A y B en comparación con el grupo C. En el esmalte cervical, el grupo B mostró una mejor adaptación marginal que el grupo C, y el grupo A presentó resultados intermedios, entre Grupos B y C. Se observó una mejora significativa de la adaptación marginal al utilizar la resina fluida Bulk-Fill en lugar de resina compuesta convencional tanto antes como después de la carga termomecánica. Sin embargo, la resina fluida 'Bulk-Fill' presentó una mayor contracción volumétrica de polimerización que el compuesto convencional.