Inhibition of dentin matrix-bound cysteine cathepsins by potassium fluoride.

Matrix metalloproteinases (MMPs) and cysteine cathepsins (CCs) can break down unprotected type I collagen fibrils in dentin matrix. This study investigated the use of potassium fluoride (KF) as a potential inhibitor of MMPs and CCs in dentin. Demineralized dentin beams were divided into groups (n = 10 in each group) and incubated in artificial saliva (AS, control), either alone or with one of seven concentrations of KF (6-238 mM fluoride) for 1, 7, and 21 d. After 21 d, all groups were further aged in AS for 6 months. Total MMP activity was screened using the colorimetric MMP assay. The activities of MMP-2 and MMP-9 were investigated using gelatin zymography. At the end of each incubation, changes in loss of dry mass and CC-mediated or total dissolution of collagen peptides were measured via precision weighing, C-terminal crosslinked telopeptide of type I collagen (CTX), and hydroxyproline (HYP) assays. The beams were examined using scanning electron microscopy. After 21 d, total MMP activities, dry mass loss, and CTX release for the groups exposed to 179 and 238 mM fluoride were significantly lower compared with the control group. After 6 months, all groups showed similar total MMP activity, dry mass loss, and HYP release, and CTX levels were significantly lower when the fluoride concentration was ≥24 mM. Calcium fluoride (CaF2 )-like precipitates were observed over the beams. In summary, KF significantly inhibited the catalytic activity of dentin matrix-bound CCs but did not seem to be effective for MMP-mediated activity.

Effect of calcium fluoride on the activity of dentin matrix-bound enzymes.

OBJECTIVE: Matrix metalloproteinases (MMPs) and cysteine cathepsins (CCs) are two distinct enzymatic pathways responsible for the degradation of collagen fibrils in demineralized dentin. NaF and KF have been shown to inhibit salivary MMP-2, -9 and CCs. This study investigated the inhibitory effect of calcium fluoride (CaF2) on the dentin matrix-bound MMPs and CCs. DESIGN: Phosphoric acid (10%)-demineralized dentin beams (1 × 2×6 mm) were incubated at 37 °C in an 1 ml of artificial saliva (AS, control), or AS with 6, 12, 24, 48, 120. 179 and 238 mM F containing CaF2 (n = 10/group) for 1, 7 and 21 days. All groups were further incubated in AS only for 6 months. Total MMP activity, dry mass loss, CTX and hydroxyproline (HYP) analyses were performed after each incubation. The beams were examined under scanning electron microscopy (SEM). MMP-2 and MMP-9 activities were screened with gelatin zymography. Data were analyzed by using ANOVA and Tukey HSD tests (p = .05). RESULTS: The total MMP activity was similar for all groups after 21 days and 6 months. After 21 days, the cumulative mass loss and CTX levels were lower compared to control for the CaF2 ≥48 and CaF2≥120 mM, respectively (p < .05). After 6 months, no significant difference was detected in the dry mass loss and CTX compared to the control (p > .05), whereas HYP level was higher with F 24 and 238 mM groups. CaF2-like minerals were observed on the beams under SEM. There was no gelatinase inhibition in zymography. CONCLUSION: CaF2 does not prevent the degradation of demineralized dentin matrices due to the catalytic activity of MMPs and CCs.

Antimicrobial efficacy and mechanical properties of BAC-modified hard and soft denture liners.

This study investigated the antimicrobial efficacy and mechanical strength of hard and soft denture liners modified with benzalkonium chloride (BAC). The specimens (1 mm thickness, 8 mm diameter) were prepared by mixing 0.5, 1, 2 and 5 wt% BAC with soft (Sofreliner Medium, Tokuyama) and hard (Rebase II, Tokuyama) denture liners (n = 5/group). BAC was not added to the controls. Candida albicans ATCC 28366 (A 550 = 0.5) and Streptococcus mutans Ingbritt suspensions (A 550 = 0.35) were pipetted onto the specimens, and incubated for 4 h. The viable cells were collected, and determined by plate-culturing (CFU). The tests were repeated after the specimens were soaked in distilled water for 7 days. The mechanical strengths were evaluated by tear and 4-point flexural strength tests for soft and hard liners, respectively. The data were analyzed with ANOVA and Tukey's HSD tests at p = 0.05. C. albicans viability was lost in all groups of BAC-modified soft liners (p < 0.001), and S. mutans viability was reduced (p < 0.01), except of soaked BAC 0.5 wt% group (p > 0.05). For the hard liner, BAC 5 wt% killed the C. albicans and S. mutans cells both before and after soaked in water (p < 0.001). BAC 2 wt% showed comparable tear strength with the soft liner control (p > 0.05). BAC did not reduce the flexural strength of the hard liner (p > 0.05), except of BAC 5 wt% group (p < 0.01). BAC can be a promising agent reducing the C. albicans and S. mutans viability on the soft and hard denture liner surfaces.

Repair bond strength of nanohybrid composite resins with a universal adhesive.

Objective: To investigate the repair bond strength of fresh and aged nanohybrid and hybrid composite resins using a universal adhesive (UA). Materials and methods: Fresh and aged substrates were prepared using two nanohybrid (Venus Pearl, Heraus Kulzer; Filtek Supreme XTE, 3 M ESPE) and one hybrid (Z100, 3 M ESPE) composite resin, and randomly assigned to different surface treatments: (1) no treatment (control), (2) surface roughening with 320-grit (SR), (3) SR + UA (iBOND, Heraus Kulzer), (4) SR + Silane (Signum, Ceramic Bond I, Heraeus Kulzer) + UA, (5) SR + Sandblasting (CoJet, 3 M ESPE) + Silane + UA. After surface treatment, fresh composite resin was added to the substrates at 2 mm layer increments to a height of 5 mm, and light cured. Restored specimens were water-stored for 24 h and sectioned to obtain 1.0 × 1.0 mm beams (n = 12), and were either water-stored for 24 h at 37 °C, or water-stored for 24 h, and then thermocycled for 6000 cycles before microtensile bond strength (µTBS) testing. Data were analyzed with ANOVA and Tukey's HSD tests (p = .05). Results: Combined treatment of SR, sandblasting, silane and UA provided repair bond strength values comparable to the cohesive strength of each tested resin material (p < .05). Thermocycling significantly reduced the cohesive strength of the composite resins upto 65% (p < .05). Repair bond strengths of UA-treated groups were more stable under thermocycling. Conclusions: Universal adhesive application is a reliable method for composite repair. Sandblasting and silane application slightly increases the repair strength for all substrate types.

Zinc Inhibits Collagenolysis by Cathepsin K and Matrix Metalloproteinases in Demineralized Dentin Matrix.

The enzymatic degradation of dentin organic matrix occurs via both the action of matrix metalloproteinases (MMPs) and cysteine cathepsins (CCs). Zinc can prevent collagen hydrolysis by MMPs. However, its effect on the activity of dentin-bound CCs is not known. The aim of this study was to investigate the effect of zinc on matrix-bound cathepsin K and MMP activity in dentin. Completely demineralized dentin beams were divided into test groups (n = 9) and incubated at 37°C in an incubation media (1 mL) containing ZnCl2 of 0.02 (physiological level, control), 0.2, 0.5, 1, 5, 10, 20, 30, or 40 mM. The dry mass changes of the beams were determined, and incubation media were analyzed for cathepsin K- and MMP-specific collagen degradation end products - CTX (C-terminal cross-linked telopeptide of type I collagen) and ICTP (cross-linked carboxy-terminal telopeptide of type I collagen) - at 1, 3, and 7 days of incubation. The mass loss of the beams decreased when the zinc level in the incubation media was ≥5 mM (p < 0.05). The release of liberated collagen degradation telopeptides decreased in accordance with the decrease in the mass loss rates of the beams. Cathepsin K-induced dentin collagen degradation can be strongly inhibited by zinc. Zinc levels of ≥5 mM can be considered as a reliable threshold for the stabilization of dentin matrices.

Color stability of bulk-fill and incremental-fill resin-based composites polished with aluminum-oxide impregnated disks.

OBJECTIVES: This study aimed to evaluate the color stability of bulk-fill and nanohybrid resin-based composites polished with 3 different, multistep, aluminum-oxide impregnated finishing and polishing disks. MATERIALS AND METHODS: Disk-shaped specimens (8 mm in diameter and 4 mm in thickness) were light-cured between two glass slabs using one nanohybid bulk-fill (Tetric EvoCeram, Ivoclar Vivadent), one micro-hybrid bulk-fill (Quixfil, Dentsply), and two nanohybrid incremental-fill (Filtek Ultimate, 3M ESPE; Herculite XRV Ultra, Kerr) resin-based composites, and aged by thermocycling (between 5 - 55℃, 3,000 cycles). Then, they were divided into subgroups according to the polishing procedure as SwissFlex (Coltène/Whaledent), Optidisc (Kerr), and Praxis TDV (TDV Dental) (n = 12 per subgroup). One surface of each specimen was left unpolished. All specimens were immersed in coffee solution at 37℃. The color differences (ΔE) were measured after 1 and 7 days of storage using a colorimeter based on CIE Lab system. The data were analyzed by univariate ANOVA, Mann-Whitney U test, and Friedmann tests (α = 0.05). RESULTS: Univariate ANOVA detected significant interactions between polishing procedure and composite resin and polishing procedure and storage time (p < 0.05). Significant color changes were detected after 1 day storage in coffee solution (p < 0.05), except Quixfil/Optidisc which was color-stable after 7 days (p > 0.05). Polishing reduced the discoloration resistance of Tetric EvoCeram/SwissFlex, Tetric EvoCeram/Praxis TDV, Quixfil-SwissFlex, and all Herculite XRV Ultra groups after 7 days storage (p < 0.05). CONCLUSIONS: Discoloration resistance of bulk-fill resin-based composites can be significantly affected by the polishing procedures.

NaF Inhibits Matrix-Bound Cathepsin-Mediated Dentin Matrix Degradation.

Matrix metalloproteinases (MMPs) and cysteine cathepsins (CCs) degrade the collagen fibrils of demineralized dentin. Sodium fluoride (NaF) has previously been shown to inhibit recombinant MMP-2 and MMP-9. This study aimed to evaluate the efficacy of NaF on the inhibition of dentin-bound MMPs and CCs. Dentin beams were completely demineralized in 10% phosphoric acid. The baseline total MMP activity and dry masses were measured. Beams were assigned to test groups based on similar MMP activity and dry mass (n = 10/group), and incubated in artificial saliva (control) or artificial saliva with NaF containing 6-238 mM fluoride for 1, 7 and 21 days. The dry mass loss and MMP activities were reassessed at each time point. The proteolytic activity was screened by gelatin zymography. ICTP and CTX released to the incubation medium were analyzed as indices of MMP and cathepsin K activity, respectively. The beams were examined under scanning electron microscopy. All NaF doses reduced the dry mass loss after 21 days (p < 0.05). NaF inhibition of the total MMP activity ranged between 5 and 80%. In gelatin zymography, the bands of MMP-2 and MMP-9 became less prominent with increasing NaF levels. NaF did not decrease the released ICTP (p > 0.05). Less CTX release was detected with F ≥179 mM (p < 0.05). CaF2-like minerals were observed on the beams. High levels of NaF may slow the degradation of the dentin matrix due to the inhibition of cathepsin K. Fluoride does not seem effective in the direct inhibition of proteolysis by dentin matrix-bound MMPs.

Stability and Marginal Bone Level Changes of SLActive Titanium-Zirconium Implants Placed with Flapless Surgery: A Prospective Pilot Study.

BACKGROUND: Immediately-loaded, narrow-diameter implants can be a less invasive alternative for the implant-supported fixed rehabilitation of narrow, posterior crests. PURPOSE: To determine the stability and marginal bone level (MBL) changes of narrow-diameter, titanium-zirconium (TiZr) implants placed with flapless surgery and loaded immediately in the posterior region. MATERIALS AND METHODS: Thirty-eight TiZr implants (3.3 mm diameter, 10 mm length, Roxolid, Straumann AG) were placed in the posterior crests of 14 patients with computer-guided flapless surgery as a support of 3-unit posterior bridges. Eighteen implants were loaded immediately, and 20 implants were loaded conventionally. The implant stability quotients were determined at the 1, 2, 4, and 8. weeks of healing before conventional loading, and at the 3, 6, and 12. months after loading by resonance frequency analysis. The MBL changes were measured by digital radiography. RESULTS: The surgical protocols were accomplished without any biological complications. There was no significant difference in the stability changes of TiZr implants between the loading groups (p > .05). The MBL changes were -0.18 ± 0.27 mm and -0.24 ± 0.27 mm at the 12. month of immediate and conventional loading, respectively, which was not statistically significant (p > .05). CONCLUSION: The stability and MBL changes of TiZr implants supporting posterior 3-unit bridges were clinically acceptable at the first year of loading.

Effects of thermocycling and various drinks on the color stability of heat-polymerized acrylic resin.

PURPOSE: The discoloration of acrylic resin denture bases may lead to significant esthetic problems. The aim of this in vitro study was to investigate the effects of frequently consumed drinks on the color changes of fresh and aged, heat-polymerized, conventional acrylic resin. MATERIALS AND METHODS: Eighty-four, heat-polymerized acrylic resin specimens (4 mm x 5 mm x 30 mm) were fabricated. Half of the specimens were aged by thermal cycling (between 5°C and 55°C, 60-second dwell time, 3000 cycles). The specimens were stored at 37°C in different drinks as non-aged and aged subgroups including water (control group), black tea, green tea, sour cherry juice, coke and coffee (n=7). The discoloration of each specimen after 1 and 7 days storage in the drinks were measured by a colorimeter based on CIE Lab system. The data of colour differences (ΔE) were analyzed by ANOVA and Dunnet's tests. RESULTS: Thermal cycling and storage in water induced a slight color change. The highest ΔE values were observed in the aged groups, which was also noticeable for black tea and sour cherry juice after 7 days of storage (ΔE>1.5) (p<0.05). The ΔE values of all test groups were detected within the acceptable clinical limits (ΔE<3.5). CONCLUSION: These results suggest that the color stability of denture base acrylic resins is influenced by ageing. Black tea, sour cherry juice and coke can cause significant discolorations on acrylic resin denture bases.

In vitro retention loss of attachment-retained removable partial denture.

AIM: To investigate the importance of attachment types on the retention loss of extracoronal attachment-retained removable partial dentures depending on the usage period. MATERIALS AND METHODS: In order to observe the retention loss of 5 different attachments (OT Strategy, OT Strategy-metal protected, Vario-stud-snap and Vario-soft 3 and ERA-RV) over time, attachment-retained partial dentures representing Kennedy II mod. I case were placed in a custom-made, retention test machine. For each minute, eight separating and joining movements were performed and retention values (Newton) of the attachments were recorded by computer. The retention tests implemented in 540,1080 and 2160 cycles. The data were evaluated statistically according to the two-way ANOVA and Tukey parametrical tests. RESULTS: The slide type attachment providing the best retention force was observed to be the most worn out by this process (p < 0.01) while the ball type attachments, which typically have the lesser retention force, showed less retention loss (p < 0.01). CONCLUSION: It can be concluded that the retention attributes of the attachment-retained dentures were affected by the specific type of precision attachment as well as the usage period. CLINICAL SIGNIFICANCE: Precision attachments with ball-type plastic matrices may be recommended for the clinical use due to their retention stability over time.