RESUMEN
The Iterative Close Point (ICP) algorithm is used for bone registrations based on ultrasound measurements. However, the ICP has been shown to suffer from local minima. The Complex optimization, as a more robust routine compared to the commonly used gradient-based algorithms, could be an alternative for solving the ICP problem. In this study, we investigated the effect of the initial estimate and the number of registration points on bone registrations achieved using the ICP and a Complex optimization routine and we compared it against using Quadratic Sequential Programming (SQP). Ultrasound measurements were performed with an A-mode probe on a bovine humerus and an ovine femur embedded into ballistic gel. Simultaneously, the bones and the probe were tracked in 3D space using retroreflective markers. Kinematic, ultrasound and geometrical data obtained from scans of the specimens and the probe served as input to a bone registrations routine. Registrations were performed using two ICP solvers for different initial estimates and number of registration points. On average, 68 % of the Complex optimization registrations had less than 1 mm translation error and less than 1° rotational error for perturbations of the initial estimate from the reference measurements compared to the 35 % of the SQP ones. Similar medians of registration errors were observed between the two methods for variations of the number of the employed registration points. Although the Complex optimization provided accurate bone registrations for all cases, the objective function could not always determine the registrations with the smallest registration error. Future research should explore methodologies to overcome this challenge.
Asunto(s)
Algoritmos , Huesos , Animales , Bovinos , Ovinos , Ultrasonografía , Huesos/diagnóstico por imagen , Fémur/diagnóstico por imagen , Extremidad Inferior , Imagenología Tridimensional/métodosRESUMEN
ABSTRACT: Substantial interindividual variability characterizes osteoarthritis (OA) pain. Previous findings identify quantitative sensory testing (QST), psychological factors, and health-related quality of life as contributors to OA pain and predictors of treatment outcomes. This exploratory study aimed to explain baseline OA pain intensity and predict OA pain after administration of a nonsteroidal anti-inflammatory drug in combination with paracetamol for 3 weeks. The Knee Injury and Osteoarthritis Outcome Score (KOOS) pain score was used to estimate OA pain presentation. One hundred one patients were assessed at baseline and follow-up using QST (pressure pain thresholds and temporal summation of pain [TSP]), symptoms of depression and anxiety, pain catastrophizing scales (PCSs), and health-related quality of life. Linear regression with backward selection identified that PCS significantly explained 34.2% of the variability in baseline KOOS pain, with nonsignificant contributions from TSP. Pain catastrophizing score and TSP predicted 29.3% of follow-up KOOS pain, with nonsignificant contributions from symptoms of anxiety. When assessed separately, PCS was the strongest predictor (32.2% of baseline and 24.1% of follow-up pain), but QST, symptoms of anxiety and depression, PCS, and quality of life also explained some variability in baseline and follow-up knee OA pain. Further analyses revealed that only TSP and PCS were not mediated by any other included variables, highlighting their role as unique contributors to OA pain presentation. This study emphasizes the importance of embracing a multimodal approach to OA pain and highlights PCS and TSP as major contributors to the baseline OA pain experience and the OA pain experience after OA treatment.
Asunto(s)
Catastrofización , Osteoartritis de la Rodilla , Dimensión del Dolor , Calidad de Vida , Humanos , Osteoartritis de la Rodilla/psicología , Osteoartritis de la Rodilla/complicaciones , Calidad de Vida/psicología , Masculino , Femenino , Persona de Mediana Edad , Anciano , Dimensión del Dolor/métodos , Catastrofización/psicología , Umbral del Dolor/fisiología , Umbral del Dolor/psicología , Dolor/psicología , Dolor/diagnóstico , Ansiedad/psicología , Ansiedad/etiología , Ansiedad/diagnóstico , Antiinflamatorios no Esteroideos/uso terapéutico , Depresión/psicología , Depresión/etiología , Depresión/diagnóstico , Acetaminofén/uso terapéutico , Valor Predictivo de las PruebasRESUMEN
Reducing compressive knee contact forces (KCF) during walking could slow the progression and reduce symptoms of knee osteoarthritis. A previous study has shown that compensating for the hip flexion/extension moment could reduce the KCF peak occurring during early stance (KCFp1). Therefore, this study aimed to identify if monoarticular hip muscle could allow this compensation while considering different walking strategies. Gait trials from 24 healthy participants were used to make musculoskeletal models, and five load-cases were examined: (I) Normal, (II) with an applied external moment compensating for 100% of the hip flexion/extension moment, and (III-V) three conditions with isolated/combined 30% increase of peak isometric strength of gluteus medius and maximus. Knee contact forces, hip muscle forces, and joint moments were computed. A cluster analysis of the Normal condition was performed with hip and knee flexion/extension moment during KCFp1 as input to examine the influence of different walking strategies. The cluster analysis revealed two groups having significantly different hip and knee moments in early-stance (p < 0.01). The reduction in KCFp1 from the Normal condition, although present in both groups, was greater for the group with the highest hip and lowest knee flexion/extension moments for all conditions tested (II: -21.82 ± 8.71% versus -6.03 ± 6.68%, III: -3.21 ± 1.09% versus -1.59 ± 0.96%, IV: -3.00 ± 0.89% versus -1.76 ± 1.04%, V: -6.12 ± 1.69 versus -3.09 ± 1.95%). This reduction in KCFp1 occurred through a shift in force developed by the hamstrings during walking (biarticular) to the gluteus medius and maximus (monoarticular), whose isometric strength was increased. The differences between the groups suggest that this reduction depends on the walking strategy.
Asunto(s)
Articulación de la Cadera , Osteoartritis de la Rodilla , Humanos , Articulación de la Cadera/fisiología , Músculo Esquelético/fisiología , Articulación de la Rodilla/fisiología , Caminata/fisiología , Marcha/fisiología , Fenómenos Biomecánicos , Fuerza Muscular/fisiologíaRESUMEN
PURPOSE: New total knee arthroplasty implant designs attempt to normalize kinematics patterns that may improve functional performance and patient satisfaction. It was hypothesized that a more medial congruent (MC) anatomic bearing design (1) influences the tibiofemoral kinematics and (2) enhances articular congruency compared to a standard symmetrical cruciate retaining (CR) bearing design. METHODS: In this double-blinded randomized study, 66 patients with knee osteoarthritis were randomly included in two groups: MC (n = 31) and CR (n = 33). Clinical characteristics such as knee ligament lesions and knee osteoarthritis scores were graded on preoperative magnetic resonance imaging and radiography. At the 1-year follow-up, dynamic radiostereometric analysis was used to assess tibiofemoral joint kinematics and articulation congruency. Patient-reported outcome measures, Oxford Knee Score, the Forgotten Joint Score, and the Knee Osteoarthritis Outcome Score, were assessed preoperatively and at the 1-year follow-up. RESULTS: Compared to the CR bearing, the MC bearing displayed an offset with approximately 3 mm greater anterior tibial drawer (p < 0.001) during the entire motion, and up to approximately 3.5 degrees more tibial external rotation (p = 0.004) from mid-swing to the end of the gait cycle at the 1-year follow-up. Furthermore, the congruency area in the joint articulation was larger during approximately 80% of the gait cycle for the MC bearing compared to the CR. The patient-reported outcome measures improved (p < 0.001), but there were no differences between groups. In addition, there were no differences in clinical characteristics and there were no knee revisions or recognized deep infections during follow-up. CONCLUSION: The study demonstrates that the MC-bearing design changes tibiofemoral kinematics and increases the area of congruency towards more native knee kinematics than the CR bearing. In perspective this may contribute to a more stabilized knee motion, restoring the patient's confidence in knee function during daily activities.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Osteoartritis de la Rodilla , Humanos , Artroplastia de Reemplazo de Rodilla/métodos , Análisis Radioestereométrico , Osteoartritis de la Rodilla/cirugía , Polietileno , Fenómenos Biomecánicos , Articulación de la Rodilla/cirugía , Ligamento Cruzado Anterior/cirugía , Marcha , Rango del Movimiento ArticularRESUMEN
Radiostereometic analysis (RSA) is an accurate method for rigid body pose (position and orientation) in three-dimensional space. Traditionally, RSA is based on insertion of periprosthetic tantalum markers and manual implant contour selection which limit clinically application. We propose an automated image registration technique utilizing digitally reconstructed radiographs (DRR) of computed tomography (CT) volumetric bone models (autorsa-bone) as a substitute for tantalum markers. Furthermore, an automated synthetic volumetric representation of total knee arthroplasty implant models (autorsa-volume) to improve previous silhouette-projection methods (autorsa-surface). As reference, we investigated the accuracy of implanted tantalum markers (marker) or a conventional manually contour-based method (mbrsa) for the femur and tibia. The data are presented as mean (standard deviation). The autorsa-bone method displayed similar accuracy of -0.013 (0.075) mm compared to the gold standard method (marker) of -0.013 (0.085). The autorsa-volume with 0.034 (0.106) mm did not markedly improve the autorsa-surface with 0.002 (0.129) mm, and none of these reached the mbrsa method of -0.009 (0.094) mm. In conclusion, marker-free RSA is feasible with similar accuracy as gold standard utilizing DRR and CT obtained volumetric bone models. Furthermore, utilizing synthetic generated volumetric implant models could not improve the silhouette-based method. However, with a slight loss of accuracy the autorsa methods provide a feasible automated alternative to the semi-automated method.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Tantalio , Análisis Radioestereométrico/métodos , Tomografía Computarizada por Rayos X/métodosRESUMEN
BACKGROUND: Total contact casts (TCCs) are used to immobilize and unload the foot and ankle for the rehabilitation of ankle fractures and for the management of diabetic foot complications. The kinematic restrictions imposed by TCCs to the foot and ankle also change knee and hip kinematics, however, these changes have not been quantified before. High joint loading is associated with discomfort and increased risk for injuries. To assess joint loading, the effect of the muscle forces acting on each joint must also be considered. This challenge can be overcome with the help of musculoskeletal modelling. RESEARCH QUESTION: How does a TCC affect lower extremity joint loading? METHODS: Twelve healthy participants performed gait trials with and without a TCC. Kinematic and kinetic recordings served as input to subject-specific musculoskeletal models that enabled the computation of joint angles and loading. Cast-leg interaction was modelled by means of reaction forces between a rigid, zero-mass cast segment and the segments of the lower extremity. RESULTS: and Significance: Reduced ankle, knee and hip range of motion was observed for the TCC condition. Statistical parametric mapping indicated decreased hip abduction and flexion moments during initial contact with the TCC. The anterior knee force was significantly decreased during the mid and terminal stance and the second peak of the compressive knee force was significantly reduced for the TCC. As expected, the TCC resulted in significantly reduced ankle loading. SIGNIFICANCE: This study is the first to quantify the effect of a TCC on lower limb joint loading. Its results demonstrate the efficiency of a TCC in unloading the ankle joint complex without increasing the peak loads on knee and hip. Future studies should investigate whether the observed knee and hip kinematic and kinetic differences could lead to discomfort.
Asunto(s)
Marcha , Extremidad Inferior , Humanos , Fenómenos Biomecánicos , Marcha/fisiología , Articulación del Tobillo/fisiología , Articulación de la Rodilla , Rango del Movimiento Articular/fisiologíaRESUMEN
Laxity tests are performed to diagnose ligament injuries or to estimate subject-specific ligament properties. While the current laxity tests are easy to perform, they are not optimized to isolate specific ligament bundles. Therefore, we developed a methodology to identify optimal laxity tests to either stretch specific ligaments relatively more than other ligaments or maximally stretch a specific ligament within the boundaries of maximally applied loads to the knee. The method was applied to a subject-specific knee model and the identified optimal laxity tests compared against standard tests. For the laxity tests isolating the stretch in a specific ligament, we found laxity tests that performed better for all ligament bundles except a few where neither the optimal nor standard laxity tests could isolate the ligament. We found force ratios, between the force change in the ligament of interest compared to the maximal force change in the other ligaments, of over 2.0 for six ligament bundles with the optimized load cases whereas the standard laxity tests only resulted in one bundle over 2.0. For the tests to maximally load the ligament of interest, increased force changes were seen for all optimal load cases and force changes of over 200 N were seen for six ligament bundles whereas only one bundle had a force change over 200N with the standard laxity tests. Our results show that there is a potential to develop better laxity tests than those performed today and emerging laxity test equipment enable implementation of such tests.
Asunto(s)
Ligamento Cruzado Anterior , Inestabilidad de la Articulación , Fenómenos Biomecánicos , Humanos , Inestabilidad de la Articulación/diagnóstico , Articulación de la RodillaRESUMEN
Musculoskeletal disorders (MSDs) induced by industrial manual handling tasks are a major issue for workers and companies. As flexible ergonomic solutions, occupational exoskeletons can decrease critically high body stress in situations of awkward postures and motions. Biomechanical models with detailed anthropometrics and motions help us to acquire a comprehension of person- and application-specifics by considering the intended and unintended effects, which is crucial for effective implementation. In the present model-based analysis, a generic back-support exoskeleton model was introduced and applied to the motion data of one male subject performing symmetric and asymmetric dynamic manual handling tasks. Different support modes were implemented with this model, including support profiles typical of passive and active systems and an unconstrained optimal support mode used for reference to compare and quantify their biomechanical effects. The conducted simulations indicate that there is a high potential to decrease the peak compression forces in L4/L5 during the investigated heavy loaded tasks for all motion sequences and exoskeleton support modes (mean reduction of 16.0% without the optimal support mode). In particular, asymmetric motions (mean reduction of 11.9%) can be relieved more than symmetric ones (mean reduction of 8.9%) by the exoskeleton support modes without the optimal assistance. The analysis of metabolic energy consumption indicates a high dependency on lifting techniques for the effectiveness of the exoskeleton support. While the exoskeleton support substantially reduces the metabolic cost for the free-squat motions, a slightly higher energy consumption was found for the symmetric stoop motion technique with the active and optimal support mode.
Asunto(s)
Dispositivo Exoesqueleto , Fenómenos Biomecánicos , Electromiografía/métodos , Humanos , Elevación , Masculino , PosturaRESUMEN
BACKGROUND: Gait analysis is burdened by time and equipment costs, interpretation, and accessibility of three-dimensional motion analysis systems. Evidence suggests growing adoption of gait testing in the shift toward evidence-based medicine. Further developments addressing these barriers will aid its efficacy in clinical practice. Previous research aiming to develop gait analysis systems for kinetics estimation using the Kinect V2 have provided promising results yet modified approaches using the latest hardware may further aid kinetics estimation accuracy RESEARCH QUESTION: Can a single Azure Kinect sensor combined with a musculoskeletal modeling approach provide kinetics estimations during gait similar to those obtained from marker-based systems with embedded force platforms? METHODS: Ten subjects were recruited to perform three walking trials at their normal speed. Trials were recorded using an eight-camera optoelectronic system with two embedded force plates and a single Azure Kinect sensor. Marker and depth data were both used to drive a musculoskeletal model using the AnyBody Modeling System. Predicted kinetics from the Azure Kinect-driven model, including ground reaction force (GRF) and joint moments, were compared to measured values using root meansquared error (RMSE), normalized RMSE, Pearson correlation, concordance correlation, and statistical parametric mapping RESULTS: High to very high correlations were observed for anteroposterior GRF (ρ = 0.889), vertical GRF (ρ = 0.940), and sagittal hip (ρ = 0.805) and ankle (ρ = 0.876) moments. RMSEs were 1.2 ± 2.2 (%BW), 3.2 ± 5.7 (%BW), 0.7 ± 0.1.3 (%BWH), and 0.6 ± 1.0 (%BWH) SIGNIFICANCE: The proposed approach using the Azure Kinect provided higher accuracy compared to previous studies using the Kinect V2 potentially due to improved foot tracking by the Azure Kinect. Future studies should seek to optimize ground contact parameters and focus on regions of error between predicted and measured kinetics highlighted currently for further improvements in kinetic estimations.
Asunto(s)
Marcha , Sistema Musculoesquelético , Fenómenos Biomecánicos , Análisis de la Marcha , Humanos , CaminataRESUMEN
BACKGROUND: Foot pain is frequent among people with rheumatoid arthritis (RA). Foot orthoses (FO) are commonly prescribed with the intention to reduce pain symptoms and improve function. RESEARCH QUESTION: How do a custom-made FO affect pain, gait biomechanics and daily activity among people with RA? METHODS: Twenty-five participants with RA and foot pain completed this quasi-experimental study using a control insole for four weeks and then a custom-made FO in the following four weeks. The foot orthoses were customized by plantar foot shape targeting optimal restoration of normal arch height. A visual analog scale was used to monitor changes in ankle/foot, knee, hip joints, and global arthritis pain. In addition, the perceived pain area was measured using a body chart analysis. Kinematics and kinetics of the hip, knee and ankle joints during gait were analyzed using 3D-motion capture. Daily steps were measured with a wrist-based activity tracker for both the control insole and custom-made FO period, respectively. RESULTS: In comparison to the control insole, the custom-made FO reduced ankle/foot pain intensity (p < 0.001) in addition to a reduction of the perceived pain areas in the feet (p < 0.001), legs (p = 0.012), as well as the arms and hands (p = 0.014). Ankle plantar flexion and eversion moments were also reduced (p < 0.001). No difference in daily steps was observed between the two periods (p = 0.657). SIGNIFICANCE: This study has demonstrated an ankle/foot pain-relieving effect in conjunction with alterations of the ankle joint moments in people with RA using custom-made FO. The pain relief is plausibly attributed to alterations of the ankle joint moments when using the custom-made FO. However, future studies are needed to explore further into therapeutic implication of custom-made FO in pain management of people with RA.
Asunto(s)
Artritis Reumatoide , Enfermedades del Pie , Ortesis del Pié , Artritis Reumatoide/complicaciones , Artritis Reumatoide/terapia , Fenómenos Biomecánicos , Marcha , Humanos , Dolor/etiologíaRESUMEN
Accurate and reliable information about three-dimensional (3D) knee joint laxity can prevent misdiagnosis and avoid incorrect treatments. Nevertheless, knee laxity assessments presented in the literature suffer from significant drawbacks such as soft tissue artifacts, restricting the knee within the measurement, and the absence of quantitative knee ligament property information. In this study, we demonstrated the applicability of a novel methodology for measuring 3D knee laxity, combining robotics- and image-based technology. As such technology has never been applied to healthy living subjects, the aims of this study were to develop novel technology to measure 3D knee laxity in vivo and to provide proof-of-concept 3D knee laxity measurements. To measure tibiofemoral movements, four healthy subjects were placed on a custom-built arthrometer located inside a low dose biplanar X-ray system with an approximately 60 deg knee flexion angle. Anteroposterior and mediolateral translation as well as internal and external rotation loads were subsequently applied to the unconstrained leg, which was placed inside a pneumatic cast boot. Bone contours were segmented in the obtained X-rays, to which subject-specific bone geometries from magnetic resonance imaging (MRI) scans were registered. Afterward, tibiofemoral poses were computed. Measurements of primary and secondary laxity revealed considerable interpersonal differences. The method differs from those available by the ability to accurately track secondary laxity of the unrestricted knee and to apply coupled forces in multiple planes. Our methodology can provide reliable information for academic knee ligament research as well as for clinical diagnostics in the future.
Asunto(s)
Inestabilidad de la Articulación , Robótica , Fenómenos Biomecánicos , Cadáver , Humanos , Inestabilidad de la Articulación/diagnóstico por imagen , Articulación de la Rodilla/diagnóstico por imagen , Rango del Movimiento ArticularRESUMEN
Foot orthoses are a first line conservative treatment for foot impairments in patients with rheumatoid arthritis (RA), however their effect on gait mechanics is poorly understood. We aimed to compare changes in lower limb and foot mechanics between two types of commonly used foot orthoses (FO) with a control. Twenty-seven patients with rheumatoid arthritis participated in this crossover study. Two different types of FO (a medially wedged custom-made FO and a prefabricated FO with a metatarsal dome, respectively), were compared against a control insole. During gait, lower limb mechanics were analyzed using 3D motion capture, force plates, and an in-shoe pressure system. Inverse dynamics models were created in the Anybody Modeling System to calculate joint angles and joint moments during gait. Gait variables were analyzed using statistical parametric mapping. Compared to the control, the prefabricated FO had limited effect on gait mechanics. Compared to the control the custom-made FO reduced ankle plantarflexion moment with 0.4 %body weight * body height (BW * BH) between 66 and 76% of stance and ankle eversion moment was reduced 0.16% BW*BH between 3 and 40% of stance. Furthermore, it also reduced the average forefoot plantar pressure by 9 kPa between 20 and 62% of stance compared to the control. Changes in foot pressure distribution, joint moments and angles were most pronounced for custom-made FO compared to the prefabricated FO. The findings suggest that patients with RA and foot impairments may benefit more from an individualized FO strategy, if the aim of the treatment is to alter gait mechanics. (NCT03561688).
Asunto(s)
Artritis Reumatoide , Ortesis del Pié , Artritis Reumatoide/terapia , Fenómenos Biomecánicos , Estudios Cruzados , Pie , Marcha , HumanosRESUMEN
Musculoskeletal models may enhance our understanding of the dynamic loading of the joints during manual material handling. This study used state-of-the-art musculoskeletal models to determine the effects of load mass, asymmetry angle, horizontal location and deposit height on the dynamic loading of the knees, shoulders and lumbar spine during lifting. Recommended weight limits and lifting indices were also calculated using the NIOSH lifting equation. Based on 1832 lifts from 22 subjects, we found that load mass had the most substantial effect on L5-S1 compression. Increments in asymmetry led to large increases in mediolateral shear, while load mass and asymmetry had significant effects on anteroposterior shear. Increased deposit height led to higher shoulder forces, while the horizontal location mostly affected the forces in the knees and shoulders. These results generally support the findings of previous research, but notable differences in the trends and magnitudes of the estimated forces were observed.
Asunto(s)
Vértebras Lumbares , Hombro , Fenómenos Biomecánicos , Humanos , Elevación , National Institute for Occupational Safety and Health, U.S. , Columna Vertebral , Estados Unidos , Soporte de PesoRESUMEN
Ligaments are important joint stabilizers but assessing their mechanical properties remain challenging. We developed a methodology to investigate the effects of kinematic measurement uncertainty during laxity tests on optimization-based estimation of ligament properties. We applied this methodology to a subject-specific knee model with known ligament properties as inputs and compared the estimated to the known knee ligament properties under the influence of noise. Four different sets of laxity tests were simulated with an increasing number of load cases, capturing anterior/posterior, varus/valgus, and internal/external rotation loads at 0 deg and 30 deg of knee flexion. 20 samples of uniform random noise ([-0.5,0.5] mm and degrees) were added to each set and fed into an optimization routine that subsequently estimated the ligament properties based on the noise targets. We found a large range of estimated ligament properties (stiffness ranges of 5.97 kN, 7.64 kN, 8.72 kN, and 3.86 kN; reference strain ranges of 3.11%, 2.53%, 1.88%, and 1.58% for anterior cruciate ligament (ACL), posterior cruciate ligament (PCL), medical collateral ligament (MCL), and lateral collateral ligament (LCL), respectively) for three sets of laxity tests, including up to 22 load cases. A set of laxity tests with 60 load cases kept the stiffness and reference strain ranges below 470 N per unit strain and 0.85%, respectively. These results illustrate that kinematic measurement noise have a large impact on estimated ligament properties and we recommend that future studies assess and report both the estimated ligament properties and the associated uncertainties due to kinematic measurement noise.
Asunto(s)
IncertidumbreRESUMEN
Manual material handling is common in supermarkets and may be a contributing factor to the high prevalence of work-related musculoskeletal disorders, particularly to the lower back. This cross-sectional study applied state-of-the-art musculoskeletal models driven by kinematic data obtained in two supermarkets to estimate joint reaction forces in the knees, shoulders and lumbar spine under dynamic lifting conditions. Based on 1479 lifts from 15 workers, 8 tasks for which the compression or shear forces in the L5-S1 joint exceeded well-known biomechanical tolerance limits were identified. High shoulder forces were associated with lifting relatively heavy merchandise to high shelves, while the weight of the handled merchandise was the main predictor of high knee forces. The study addressed well-known limitations associated with traditional lifting analysis tools and was the first to present a detailed analysis of the biomechanical loads during manual material handling tasks in the supermarket sector based on field measurements.
Asunto(s)
Articulación del Hombro , Fenómenos Biomecánicos , Estudios Transversales , Humanos , Elevación , Vértebras Lumbares , Región Lumbosacra , Columna Vertebral , Supermercados , Soporte de PesoRESUMEN
Work-related musculoskeletal disorders are highly prevalent in the supermarket sector with manual material handling being one of the most commonly identified occupational risk factors. This cross-sectional study applied inertial motion capture and electromyography (EMG) to measure full-body kinematics and muscle activity of trapezius descendens and erector spinae longissimus during 50 manual material handling tasks performed by 17 workers in two supermarkets. The handling of bread and cucumbers to high shelf heights showed the highest trapezius muscle activity (from 47% to 59% peak normalized EMG), while the handling of bananas as well as lifting milk, bread and cucumbers from low to high positions showed the highest erector spinae activity (from 59% to 71%). Twenty-two tasks involved flexing the shoulders and trunk more than 90° and 50°, respectively. Based on these results, several manual handling practices in supermarkets should be reconsidered to reduce the physical work demands.
Asunto(s)
Músculos Superficiales de la Espalda , Estudios Transversales , Electromiografía , Humanos , Elevación , Músculo Esquelético , Músculos Paraespinales , SupermercadosRESUMEN
Musculoskeletal (MS) models can be used to study the muscle, ligament, and joint mechanics of natural knees. However, models that both capture subject-specific geometry and contain a detailed joint model do not currently exist. This study aims to first develop magnetic resonance image (MRI)-based subject-specific models with a detailed natural knee joint capable of simultaneously estimating in vivo ligament, muscle, tibiofemoral (TF), and patellofemoral (PF) joint contact forces and secondary joint kinematics. Then, to evaluate the models, the predicted secondary joint kinematics were compared to in vivo joint kinematics extracted from biplanar X-ray images (acquired using slot scanning technology) during a quasi-static lunge. To construct the models, bone, ligament, and cartilage structures were segmented from MRI scans of four subjects. The models were then used to simulate lunges based on motion capture and force place data. Accurate estimates of TF secondary joint kinematics and PF translations were found: translations were predicted with a mean difference (MD) and standard error (SE) of 2.13 ± 0.22 mm between all trials and measures, while rotations had a MD ± SE of 8.57 ± 0.63 deg. Ligament and contact forces were also reported. The presented modeling workflow and the resulting knee joint model have potential to aid in the understanding of subject-specific biomechanics and simulating the effects of surgical treatment and/or external devices on functional knee mechanics on an individual level.
Asunto(s)
Articulación de la Rodilla , Articulación Patelofemoral , Adulto , Fenómenos Biomecánicos , Humanos , Masculino , Rango del Movimiento ArticularRESUMEN
Musculoskeletal models have traditionally relied on measurements of segment kinematics and ground reaction forces and moments (GRF&Ms) from marked-based motion capture and floor-mounted force plates, which are typically limited to laboratory settings. Recent advances in inertial motion capture (IMC) as well as methods for predicting GRF&Ms have enabled the acquisition of these input data in the field. Therefore, this study evaluated the concurrent validity of a novel methodology for estimating the dynamic loading of the lumbar spine during manual materials handling based on a musculoskeletal model driven exclusively using IMC data and predicted GRF&Ms. Trunk kinematics, GRF&Ms, L4-L5 joint reaction forces (JRFs) and erector spinae muscle forces from 13 subjects performing various lifting and transferring tasks were compared to a model driven by simultaneously recorded skin-marker trajectories and force plate data. Moderate to excellent correlations and relatively low magnitude differences were found for the L4-L5 axial compression, erector spinae muscle and vertical ground reaction forces during symmetrical and asymmetrical lifting, but discrepancies were also identified between the models, particularly for the trunk kinematics and L4-L5 shear forces. Based on these results, the presented methodology can be applied for estimating the relative L4-L5 axial compression forces under dynamic conditions during manual materials handling in the field.
Asunto(s)
Vértebras Lumbares/fisiología , Modelos Biológicos , Movimiento/fisiología , Adulto , Fenómenos Biomecánicos , Femenino , Humanos , Región Lumbosacra , Masculino , Soporte de Peso/fisiologíaRESUMEN
BACKGROUND: Foot pain and deformities are commonly encountered in patients with rheumatoid arthritis (RA). Likewise, Posterior tibial tendon dysfunction (PTTD) is commonly involved in development of foot and ankle abnormalities and has been reported with a prevalence in two-thirds of the RA patients. RESEARCH QUESTION: Redundancy in the physiological function between different muscles provides the central nervous system multiple options to perform the same movement but which muscles compensate for the impairment of the tibialis posterior (TP) muscle? And how does these changes affect ankle joint loading? METHODS: Experimental and computational disciplines were applied to investigate changes in muscle forces as result of induced pain in the right TP muscle. Twelve healthy subjects were enrolled in the study. Experimental pain was induced in the TP by a single ultrasound graphically guided injection of 1â¯mL hypertonic saline (5.0% Sodium Chloride). The participants' gait was assessed by skin marker-based motion capture and force plates. Musculoskeletal models were used to investigate compensation mechanisms systematically in the lower under extremity when TP muscle was recruited less as a consequence of the induced pain. RESULTS: Experimental TP muscle pain and simulated reduced strength caused altered muscle recruitment and made the flexor digitorum longus and flexor hallucis longus muscles compensated for the impairment of the TP muscle. Further, the resultant ankle joint force was increased as the strength of the TP muscle was reduced. SIGNIFICANCE: The compensation mechanism observed in the present study indicate that alterations in muscle recruitment and muscle force distribution as a result of the underlying disease inflammation itself may contribute to development of chronic foot pain and deformities in patients with RA. Further studies are required to understand the role of PTTD in occurrence of those late adverse musculoskeletal manifestations aiming at search for early preventive strategies.
Asunto(s)
Artritis Reumatoide/complicaciones , Músculo Esquelético/fisiología , Mialgia/fisiopatología , Adulto , Articulación del Tobillo/fisiopatología , Artritis Reumatoide/fisiopatología , Pie/fisiopatología , Marcha , Humanos , Mialgia/etiología , PacientesRESUMEN
A novel metric for the validation of musculoskeletal models is proposed, the reachable 3-D workspace (RWS). This new metric was used to compare a generic model scaled in a standard manner to a more subject-specific model. An experimental protocol for assessing the RWS was performed by ten participants for four distinct hand-payload cases. In addition, isometric individual strength measurements were collected for 12 different directions. The strength of subject-specific musculoskeletal models was then computed using the following assumptions: (1) standard routines including the length-mass-fat (LMF) scaling law; (2) the isometric strengths of the muscle elements were optimized to the individual strength measurements using joint strength factors (JSF). The RWS of each participant was subsequently estimated from each of the scaling approaches, LMF and JSF, for the four load cases. The experimental RWS showed that the volume and shape decreased with increasing hand-payload for every participant. The lateral and frontal far-from-torso aspects of the RWS were reduced the most. These trends were reproduced by both strength scaling approaches, but the LMF-scaled models were not able to track the overall RWS volume decrease with increasing payload, since they proved to be weaker than the participants. On the other hand, the optimised JSF subject-specific models performed better on the prediction of the RWS for all payload cases across participants. The RWS can potentially be further used as a subject-specific musculoskeletal model validation, enabling quantification of the volume and shape differences between experimentally and model-predicted RWSs.