RESUMEN
Recent research has shown that microplastics are widespread in the atmosphere. However, we know little about their ability to nucleate ice and their impact on ice formation in clouds. Ice nucleation by microplastics could also limit their long-range transport and global distribution. The present study explores the heterogeneous ice-nucleating ability of seven microplastic samples in immersion freezing mode. Two polypropylene samples and one polyethylene terephthalate sample froze heterogeneously with median freezing temperatures of -20.9, -23.2, and -21.9 °C, respectively. The number of ice nucleation sites per surface area, ns(T), ranged from 10-1 to 104 cm-2 in a temperature interval of -15 to -25 °C, which is comparable to that of volcanic ash and fungal spores. After exposure to ozone or a combination of UV light and ozone, simulating atmospheric aging, the ice nucleation activity decreased in some cases and remained unchanged in others. Our freezing data suggest that microplastics may promote ice formation in cloud droplets. In addition, based on a comparison of our freezing results and previous simulations using a global transport model, ice nucleation by microplastics will impact their long-range transport to faraway locations and global distribution.
RESUMEN
Peritoneal carcinomatosis (PC) is characterized by a high recurrence rate and mortality following cytoreductive surgery and hyperthermic intraperitoneal chemotherapy (HIPEC), primarily due to incomplete cancer elimination. To enhance the standard of care for PC, we developed two cationic liposomal formulations aimed at localizing a toll-like receptor agonist, resiquimod (R848), in the peritoneal cavity to activate the immune system locally to specifically eradicate residual tumor cells. These formulations effectively extended R848 retention in the peritoneum by >10-fold, resulting in up to a 2-fold increase in interferon α (IFN-α) induction in the peritoneal fluid, without increasing the plasma levels. In a CT26 colon cancer model with peritoneal metastases, these liposomal R848 formulations, when combined with oxaliplatin (OXA)-an agent used in HIPEC that induces immunogenic cell death-increased tumor infiltration of effector immune cells, including DCs, CD4, and CD8 T cells. This led to the complete elimination of PC in 60-70% of the mice, while the control mice reached humane endpoints by 30 days. The cured mice developed specific antitumor immunity, as re-challenging them with the same tumor cells did not result in tumor establishment. However, inoculation with a different tumor line led to tumor development. Additionally, exposing CT26 tumor antigens to the splenocytes isolated from the cured mice induced the expansion of CD4 and CD8 T cells and the release of IFN-γ, demonstrating long-term immune memory to the specific tumor. The anti-tumor efficacy of these liposomal R848 formulations was mediated via CD8 T cells with different levels of involvement of CD4 and B cells, and the combination with an anti-PD-1 antibody achieved a cure rate of 90%.
Asunto(s)
Imidazoles , Liposomas , Ratones Endogámicos BALB C , Oxaliplatino , Neoplasias Peritoneales , Animales , Neoplasias Peritoneales/secundario , Neoplasias Peritoneales/tratamiento farmacológico , Neoplasias Peritoneales/inmunología , Imidazoles/administración & dosificación , Línea Celular Tumoral , Femenino , Oxaliplatino/administración & dosificación , Antineoplásicos/administración & dosificación , Antineoplásicos/uso terapéutico , Cationes , Ratones , Neoplasias del Colon/inmunología , Neoplasias del Colon/patología , Neoplasias del Colon/tratamiento farmacológicoRESUMEN
Frequent injections of anti-CD124 monoclonal antibody (αCD124) over long periods of time are used to treat chronic rhinosinusitis with nasal polyps (CRSwNP). Needle-free, intranasal administration (i.n.) of αCD124 is expected to provide advantages of localized delivery, improved efficacy, and enhanced medication adherence. However, delivery barriers such as the mucus and epithelium in the nasal tissue impede penetration of αCD124. Herein, two novel protamine nanoconstructs: allyl glycidyl ether conjugated protamine (Nano-P) and polyamidoamine-linked protamine (Dendri-P) were synthesized and showed enhanced αCD124 penetration through multiple epithelial layers compared to protamine in mice. αCD124 was mixed with Nano-P or Dendri-P and then intranasally delivered for the treatment of severe CRSwNP in mice. Micro-CT and pathological changes in nasal turbinates showed that these two nano-formulations achieved â¼50 % and â¼40 % reductions in nasal polypoid lesions and eosinophil count, respectively. Both nano-formulations provided enhanced efficacy in suppressing nasal and systemic Immunoglobulin E (IgE) and nasal type 2 inflammatory biomarkers, such as interleukin 13 (IL-13) and IL-25. These effects were superior to those in the protamine formulation group and subcutaneous (s.c.) αCD124 given at a 12.5-fold higher dose. Intranasal delivery of protamine, Nano-P, or Dendri-P did not induce any measurable toxicities in mice.
Asunto(s)
Anticuerpos Monoclonales , Pólipos Nasales , Protaminas , Rinosinusitis , Animales , Femenino , Ratones , Administración Intranasal , Anticuerpos Monoclonales/administración & dosificación , Anticuerpos Monoclonales/farmacología , Enfermedad Crónica , Ratones Endogámicos BALB C , Pólipos Nasales/tratamiento farmacológico , Pólipos Nasales/patología , Protaminas/química , Rinosinusitis/tratamiento farmacológicoRESUMEN
Therapeutic proteins often require needle-based injections, which compromise medication adherence especially for those with chronic diseases. Sublingual administration provides a simple and non-invasive alternative. Herein, two novel peptides (lipid-conjugated protamine and a protamine dimer) were synthesized to enable sublingual delivery of proteins through simple physical mixing with the payloads. It was found that the novel peptides promoted intracellular delivery of proteins via increased pore formation on the cell surface. Results from in vitro models of cell spheroids and human sublingual tissue substitute indicated that the novel peptides enhanced protein penetration through multiple cell layers compared to protamine. The novel peptides were mixed with insulin or semaglutide and sublingually delivered to mice for blood glucose (BG) control. The effects of these sublingual formulations were comparable to the subcutaneous preparations and superior to protamine. In addition to peptide drugs, the novel peptides were shown to enable sublingual absorption of larger proteins with molecular weights from 22 to 150 kDa in mice, including human recombinant growth hormone (rhGH), bovine serum albumin (BSA) and Immunoglobulin G (IgG). The novel peptides given sublingually did not induce any measurable toxicities in mice.
Asunto(s)
Inmunoglobulina G , Péptidos , Animales , Ratones , Humanos , Administración Sublingual , ProtaminasRESUMEN
Microfluidic manufacturing of advanced gene delivery vectors necessitates consideration of the effects of microfluidic shear forces on the structural integrity of plasmid DNA (pDNA). In this paper, we expose pDNA to variable shear forces in a two-phase, gas-liquid microfluidic reactor and apply gel electrophoresis to analyze the products of on-chip shear-induced degradation. The effects of shear rate, solvent environment, pDNA size, and copolymer complexation on shear-induced degradation are investigated. We find that small naked pDNA (pUC18, 2.7 kb) exhibits shear rate-dependent shear degradation in the microfluidic channels in a mixed organic solvent (dioxane/water/acetic acid; 90/10/<0.1 w/w/w), with the extents of both supercoil isoform relaxation and complete fragmentation increasing as the maximum shear rates increase from 4 × 105 to 2 × 106 s-1. However, over the same range of shear rates, the same pDNA sample shows no evidence of microfluidic shear-induced degradation in a pure aqueous environment. Quiescent control experiments in the same mixed organic solvent prove that a combination of solvent and shear forces is involved in the observed shear-induced degradation. Furthermore, we show that shear degradation effects in mixed organic solvents can be significantly attenuated by complexation of pDNA with the block copolymer polycaprolactone-block-poly(2-vinylpyridine) prior to exposure to microfluidic shear. Finally, we demonstrate that medium (pDSK519, 8.1 kb) and large (pRK290, 20 kb) naked pDNA are more sensitive to shear-induced microfluidic degradation in the mixed organic solvent environment than small pDNA, with both plasmids showing complete fragmentation even at the lowest shear rate, although we found no evidence of shear-induced damage in water for the largest investigated naked pDNA even at the highest flow rate. The resulting understanding of the interplay of the solvent and shear effects during microfluidic processing should inform microfluidic manufacturing routes to new gene therapy formulations.
Asunto(s)
ADN , Microfluídica , Plásmidos/genética , ADN/química , Polímeros/química , Terapia Genética/métodos , Solventes , AguaRESUMEN
The quest for advanced water purification technologies has been vigorous over recent decades, motivated by the promise of ever more efficient, greener, and affordable tools. Halloysite nanotubes (HNTs) are naturally-occurring materials that have shown potential as dye sorbents. Unfortunately, these nanoclays suffer from low permeation during water treatment, which limits their widespread application. Here, we use cellulose nanocrystals (CNCs) as structural scaffolds to support HNTs and fabricate permeable aerogel sorbent materials with mechanical stability. Aerogels containing 40 wt% HNTs showed a maximum dye adsorption capacity of 60 mg g-1 towards methylene blue, with only 15% decay in efficiency after 5 cycles. The good mechanical properties of these materials allowed for their incorporation into free-flowing purification columns that displayed excellent dye removal ability. Overall, this work provides a new strategy to fabricate green, renewable, and low-cost sorbent materials for the removal of dyes and shows potential for the sorption of other ionic pollutants.
RESUMEN
Films of cellulose nanocrystals (CNCs) with chiral nematic organization can show vivid iridescence that arises from their hierarchical structure. Unfortunately, the brittleness of the films limits their potential applications. In this paper, we investigate the incorporation of halloysite nanotubes (HNTs) into CNC films to prepare organic-inorganic composite films with enhanced mechanical properties, while preserving the chiral nematic structure and brilliant iridescence. The hybrid composite films containing 10 wt% HNTs are more elastic than pristine CNC films, with a 1.3-fold increase in tensile strength and a 1.6-fold increase in maximum strain. As well, the incorporation of HNTs slightly improves the thermal stability of the composite films. These materials mimic the hybrid composite structures of crab shells, leading to enhanced mechanical properties and thermal stability of CNC films while maintaining iridescence.
RESUMEN
The development of long-lived electrochemical energy storage systems based on renewable materials is integral for the transition toward a more sustainable society. Supercapacitors have garnered considerable interest given their impressive cycling performance, low cost, and safety. Here, the first example of a chiral nematic activated carbon aerogel is shown. Specifically, supercapacitor materials are developed based on cellulose, a non-toxic and biodegradable material. The chiral nematic structure of cellulose nanocrystals (CNCs) is harnessed to obtain free-standing hierarchically ordered activated carbon aerogels. To impart multifunctionality, iron- and cobalt-oxide nanoparticles are incorporated within the CNC matrix. The hierarchical structure remains intact even at nanoparticle concentrations of ≈70 wt%. The aerogels are highly porous, with specific surface areas up to 820 m2 g-1 . A maximum magnetization of 17.8 ± 0.1 emu g-1 with superparamagnetic behavior is obtained, providing a base for actuator applications. These materials are employed as symmetric supercapacitors; owing to the concomitant effect of the hierarchically arranged carbon skeleton and KOH activation, a maximum Cp of 294 F g-1 with a capacitance retention of 93% after 2500 cycles at 50 mV s-1 is achieved. The multifunctionality of the composite aerogels opens new possibilities for the use of biomass-derived materials in energy storage and sensing applications.
RESUMEN
Zeolitic imidazolate framework (ZIF-8) nanocrystals were uniformly grown on the surface of cellulose nanocrystals (CNCs) to give a hybrid material, ZIF@CNCs. By varying the stoichiometry of the components, it was possible to control the size of the ZIF-8 crystals grown on the CNC surface. Optimized ZIF@CNC (ZIF@CNC-2) was used as a template to synthesize a microporous organic polymer (MOP), ZIF@MOP@CNC. After etching the ZIF-8 with 6â M HCl solution, a MOP material with encapsulated CNCs (MOP@CNC) was formed. Zinc coordination into the porphyrin unit of the MOP yielded the ship-in-a-bottle structure, Zn MOP@CNC, comprised of CNCs encapsulated within the Zn-MOP. In comparison to ZIF@CNC-2, Zn MOP@CNC showed better catalytic activity and chemical stability for CO2 fixation, converting epichlorohydrin to chloroethylene carbonate. This work demonstrates a novel approach to create porous materials through CNC templating.
RESUMEN
Photonic materials based on composite films of cellulose nanocrystals (CNCs) and polymers are promising as they can be renewable and show tunable optical and mechanical properties. However, the influence of polymers on CNC self-assembly is not always well understood, and conflicting results are present in the literature. In this study, we incorporate three neutral, water-soluble polymers-poly(ethylene glycol) (PEG), poly(vinyl pyrrolidone) (PVP), and poly(acrylic acid) (PAA)-with different molecular weights into CNC suspensions at various concentrations prior to obtaining iridescent composite thin films by solvent evaporation. Through spectroscopic, potentiometric, and rheological analyses, we find that PVP physically adsorbs to the surface of CNCs resulting in a bathochromic shift in film color with both increasing concentration and polymer molecular weight. In contrast, PEG induces depletion interactions that result in a decrease in the size of chiral nematic CNC domains, with a negligible change in film color. Finally, PAA hydrogen bonds to the hydroxyl groups of CNCs, resulting in a bathochromic color shift along with interesting rheological and liquid-state properties. This work demonstrates a deeper understanding of CNC-polymer interactions during coassembly and formation of iridescent chiral nematic films, allowing for greater control over optical properties of future CNC-based materials.