RESUMEN
The crises of climate change and biodiversity loss are interlinked and must be addressed jointly. A proposed solution for reducing reliance on fossil fuels, and thus mitigating climate change, is the transition from conventional combustion-engine to electric vehicles. This transition currently requires additional mineral resources, such as nickel and cobalt used in car batteries, presently obtained from land-based mines. Most options to meet this demand are associated with some biodiversity loss. One proposal is to mine the deep seabed, a vast, relatively pristine and mostly unexplored region of our planet. Few comparisons of environmental impacts of solely expanding land-based mining versus extending mining to the deep seabed for the additional resources exist and for biodiversity only qualitative. Here, we present a framework that facilitates a holistic comparison of relative ecosystem impacts by mining, using empirical data from relevant environmental metrics. This framework (Environmental Impact Wheel) includes a suite of physicochemical and biological components, rather than a few selected metrics, surrogates, or proxies. It is modified from the "recovery wheel" presented in the International Standards for the Practice of Ecological Restoration to address impacts rather than recovery. The wheel includes six attributes (physical condition, community composition, structural diversity, ecosystem function, external exchanges and absence of threats). Each has 3-5 sub attributes, in turn measured with several indicators. The framework includes five steps: (1) identifying geographic scope; (2) identifying relevant spatiotemporal scales; (3) selecting relevant indicators for each sub-attribute; (4) aggregating changes in indicators to scores; and (5) generating Environmental Impact Wheels for targeted comparisons. To move forward comparisons of land-based with deep seabed mining, thresholds of the indicators that reflect the range in severity of environmental impacts are needed. Indicators should be based on clearly articulated environmental goals, with objectives and targets that are specific, measurable, achievable, relevant, and time bound.
Asunto(s)
Minería , Biodiversidad , Ecosistema , Ambiente , Conservación de los Recursos Naturales , Cambio ClimáticoRESUMEN
Plants alter soil biological communities, generating ecosystem legacies that affect the performance of successive plants, influencing plant community assembly and successional trajectories. Yet, our understanding of how microbe-mediated soil legacies influence plant establishment is limited for primary successional systems and forest ecosystems, particularly for ectomycorrhizal plants. In a two-phase greenhouse experiment using primary successional mine reclamation materials with or without forest soil additions, we conditioned soil with an early successional shrub with low mycorrhizal dependence (willow, Salix scouleriana) and a later-successional ectomycorrhizal conifer (spruce, Picea engelmannii × glauca). The same plant species and later-successional plants (spruce and/or redcedar, Thuja plicata, a mid- to late-successional arbuscular mycorrhizal conifer) were grown as legacy-phase seedlings in conditioned soils and unconditioned control soils. Legacy effects were evaluated based on seedling survival and biomass, and the abundance and diversity of root fungal symbionts and pathogens. We found negative intraspecific (same-species) soil legacies for willow associated with pathogen accumulation, but neutral to positive intraspecific legacies in spruce associated with increased mycorrhizal fungal colonization and diversity. Our findings support research showing that soil legacy effects vary with plant nutrient acquisition strategy, with plants with low mycorrhizal dependence experiencing negative feedbacks and ectomycorrhizal plants experiencing positive feedbacks. Soil legacy effects of willow on next-stage successional species (spruce and redcedar) were negative, potentially due to allelopathy, while ectomycorrhizal spruce had neutral to negative legacy effects on arbuscular mycorrhizal redcedar, likely due to the trees not associating with compatible mycorrhizae. Thus, positive biological legacies may be limited to scenarios where mycorrhizal-dependent plants grow in soil containing legacies of compatible mycorrhizae. We found that soil legacies influenced plant performance in mine reclamation materials with and without forest soil additions, indicating that initial restoration actions may potentially exert long-term effects on plant community composition, even in primary successional soils with low microbial activity.
RESUMEN
Geometry of the patella (kneecap) remains poorly understood yet is highly relevant to performing the correct patellar cut to reduce pain and to improve function and satisfaction after knee replacement surgery. Although studies routinely refer to "parallel to the anterior surface" and "the patellar horizon," a quantitative definition of these is lacking and significant variability exists between observers for this irregularly-shaped bone. A 2D-3D shape analysis technique was developed to determine the optimal device configuration for contacting the patellar surface. Axial and sagittal pseudo-X-rays were created from 18 computed tomography (CT) scans of cadaveric knees. Four expert surgeons reviewed three repetitions of the X-rays in randomized order, marking their desired cut plane and their estimate of the anterior surface. These 2D results were related back to the 3D model to create the desired plane. There was considerable variability in perceptions, with intra- and intersurgeon repeatability (standard deviations) ranging from 1.3° to 2.4°. The best configuration of contact points to achieve the desired cutting plane was three pegs centred on the patellar surface, two superior and one inferior, forming a 16 mm equilateral triangle. This configuration achieved predicted cut planes within 1° of the surgeon ranges on all 18 patellae. Implementing this, as was done in a subsequent prototype surgical device, should help improve the success and satisfaction of knee replacement surgery.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/métodos , Rótula/anatomía & histología , Rótula/cirugía , Adulto , Anciano , Anciano de 80 o más Años , Cadáver , Testimonio de Experto , Femenino , Humanos , Imagenología Tridimensional , Masculino , Persona de Mediana Edad , Modelos Anatómicos , Variaciones Dependientes del Observador , Rótula/diagnóstico por imagen , Cirugía Asistida por Computador/métodos , Tomografía Computarizada por Rayos XRESUMEN
PURPOSE: The main challenge of intramedullary nail (IM-nail) fixation surgery is to achieve the X-ray shot in which the distal holes of the IM-nail appear as circles (desired view); screw insertion is then performed. Although C-arm X-ray devices are routinely used in IM-nail fixation procedures, the surgeons or radiation technologists (rad-techs) usually utilize them in a trial-and-error manner. This increases both radiation exposure and surgery time. This study addresses the problem by presenting a C-arm-based IM-nail pose recognition method. METHODS: The specific purpose of this study was to develop and validate an automated technique for identifying the current pose of the IM-nail relative to the C-arm. An accuracy assessment is performed to test the reliability of the navigation results. The algorithm starts with a sequential biplanar set of X-ray imagery (acquired from a tracked C-arm) of the distal part of an inserted IM-nail. The image-processing module then extracts features of interest, and a mathematical model incorporates them to calculate the six degree-of-freedom position and orientation parameters of the nail. RESULTS: Translational accuracy was demonstrated to be better than 0.5 mm, rotational accuracy for roll and pitch to be better than 2° and for yaw to be better than 2.5° depending on the separation angle. Computation time was less than 0.5 s. . CONCLUSION: An IM-nail distal locking navigation technique is introduced in this study that leads to more accurate and faster screw placement with a lower consumption of radiation dose and a minimum number of added steps to the operation.
Asunto(s)
Algoritmos , Tornillos Óseos , Fluoroscopía/métodos , Fijación Intramedular de Fracturas/instrumentación , Fracturas Óseas/cirugía , Procesamiento de Imagen Asistido por Computador , Cirugía Asistida por Computador/instrumentación , Diseño de Equipo , Fracturas Óseas/diagnóstico por imagen , Humanos , Reproducibilidad de los ResultadosRESUMEN
BACKGROUND: Osteoarthritis is a debilitating disease, for which the development path is unknown. Hip, pelvis and femoral morphological and positional parameters relate either to individual differences or to changes in the disease state, both of which should be taken into account when diagnosing and treating patients. These have not yet been comprehensively quantified. Previous imaging studies have been limited by a number of factors: supine rather than standing measurements; high radiation dose; a limited field of view; and 2D rather than 3D measurements. EOS®, a new radiographic imaging modality that acquires simultaneous frontal and lateral (sagittal) X-ray images of the full body, allows 3D reconstruction of the hip, pelvis and lower limb. The aim of the study was to explore similarities and differences between healthy and osteoarthritis groups. METHODS: Two groups of subjects, 30 healthy and 30 with hip osteoarthritis, were assessed and compared for pelvic, acetabular and femoral parameters in the standing position. FINDINGS: There were not only significant differences between groups but also considerable overlap amongst the individuals. Sacral slope, acetabular angle of Idelberger and Frank, femoral mechanical angle and femoral head eccentricity as well as right-left asymmetries in centre-edge acetabular angle and femoral head diameter were higher on average in osteoarthritic patients compared to healthy subjects, whereas acetabular abduction was lower in the osteoarthritic group (P<0.05). Correlations were identified between key parameters in both groups. INTERPRETATION: Differences between the groups suggest either degenerative changes over time or inherent differences between individuals that may contribute to the disease progression. These data provide a basis for longitudinal and post-surgery studies. Due to the considerable variability amongst individuals and the considerable overlap between groups, patients should be evaluated individually and at multiple joints when planning hip, knee and spine surgery.
Asunto(s)
Acetábulo/diagnóstico por imagen , Fémur/diagnóstico por imagen , Cadera/diagnóstico por imagen , Osteoartritis de la Cadera/diagnóstico por imagen , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Cabeza Femoral/diagnóstico por imagen , Humanos , Imagenología Tridimensional , Masculino , Persona de Mediana Edad , Postura , Radiografía , Adulto JovenRESUMEN
Using a three-dimensional (3D) modality to image patients' knees before and after total knee arthroplasty (TKA) allows researchers and clinicians to evaluate causes of pain after TKA, differences in implant design, and changes in the articular geometry as a result of surgery. Computed tomography (CT) has not been fully utilized to date for evaluating the knee after TKA due to metal artifacts obscuring part of the image. We describe an accurate, validated protocol, which has been implemented in vivo, that improves visibility of the patellofemoral joint, matches implant models automatically in 3D, segments preoperative bone semi-automatically, detects and sets coordinate systems automatically, determines the six degrees of freedom of knee pose and geometry, and allows for multiple other measurements that are clinically relevant. Subjects are imaged at 0° and 30° knee flexion, while pushing on a custom-made knee rig to provide partial loadbearing. With some modifications, the protocol can be adopted by any group with access to a CT scanner and image analysis software, allowing for the investigation of numerous clinical and biomechanical questions.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Rodilla , Diseño de Prótesis , Programas Informáticos , Tomografía Computarizada por Rayos X/métodos , Femenino , Humanos , Rodilla/diagnóstico por imagen , Rodilla/fisiopatología , Rodilla/cirugía , Masculino , Soporte de PesoRESUMEN
Orthopaedic residents typically learn to perform total knee arthroplasty (TKA) through an apprenticeship-type model, which is a necessarily slow process. Surgical skills courses, using artificial bones, have been shown to improve technical and cognitive skills significantly within a couple of days. The addition of computer-assisted surgery (CAS) simulations challenges the participants to consider the same task in a different context, promoting cognitive flexibility. We designed a hands-on educational intervention for junior residents with a conventional tibiofemoral TKA station, two different tibiofemoral CAS stations, and a CAS and conventional patellar resection station, including both qualitative and quantitative analyses. Qualitatively, structured interviews before and after the course were analyzed for recurring themes. Quantitatively, subjects were evaluated on their technical skills before and after the course, and on a multiple-choice knowledge test and error detection test after the course, in comparison to senior residents who performed only the testing. Four themes emerged: confidence, awareness, deepening knowledge and changed perspectives. The residents' attitudes to CAS changed from negative before the course to neutral or positive afterwards. The junior resident group completed 23% of tasks in the pre-course skills test and 75% of tasks on the post-test (p<0.01), compared to 45% of tasks completed by the senior resident group. High-impact educational interventions, promoting cognitive flexibility, would benefit trainees, attending surgeons, the healthcare system and patients.
Asunto(s)
Artroplastia de Reemplazo de Cadera/educación , Competencia Clínica , Simulación por Computador , Educación Médica/métodos , Ortopedia/educación , Cirugía Asistida por Computador , Alberta , Artroplastia de Reemplazo de Cadera/métodos , Cognición , Curriculum , Educación de Postgrado en Medicina , Escolaridad , Conocimientos, Actitudes y Práctica en Salud , Humanos , Internado y Residencia , Aprendizaje , Ortopedia/métodos , Investigación Cualitativa , Autoinforme , Estadística como Asunto , Estadísticas no Paramétricas , EnseñanzaRESUMEN
Incorrect patellar resection during total knee arthroplasty can lead to anterior knee pain, patellar maltracking, patellofemoral impingement, patellar fracture, component loosening and reduced range of motion. A computer-assisted surgery (CAS) system was developed to improve the accuracy of the patellar cut. Twelve cadaveric knee specimens (6 pairs) were surgically prepared and the patella resected by two senior orthopaedic residents using either a conventional sawguide technique (right knee) or a computer-assisted sawguide technique (left knee). Multiple cuts and measurements were permitted for the conventional technique, to reflect the clinical situation, whereas only a single cut was permitted for the CAS technique. Prior training had been provided on artificial bones for both techniques. Custom marker arrays were mounted on the sawguide and patella. The user positioned the sawguide based on a real-time display that compared the current sawguide plane to the ideal resection. The resulting mediolateral and superoinferior resection angles and central thickness were measured from CT scans of the specimens, relative to the anterior surface of the patella. Both techniques resulted in symmetric cuts (<7°). Repeatability in the mediolateral direction was better for the CAS technique than for the conventional technique (p<0.01). This study demonstrated that computer-assisted patellar resection is a feasible approach that can produce results equal to or better than those obtained with conventional techniques, even when the experimental conditions favor the conventional technique. Improvements in the CAS hardware could further improve the accuracy and usability of the system, resulting in reductions in postoperative complications. Patellar CAS could also serve as a valuable tool for feedback and training.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/métodos , Prótesis de la Rodilla , Rótula/cirugía , Cirugía Asistida por Computador/métodos , Anciano , Anciano de 80 o más Años , Cadáver , Femenino , Humanos , Masculino , Persona de Mediana EdadRESUMEN
OBJECTIVES: Numerous complications following total knee replacement (TKR) relate to the patellofemoral (PF) joint, including pain and patellar maltracking, yet the options for in vivo imaging of the PF joint are limited, especially after TKR. We propose a novel sequential biplane radiological method that permits accurate tracking of the PF and tibiofemoral (TF) joints throughout the range of movement under weightbearing, and test it in knees pre- and post-arthroplasty. METHODS: A total of three knees with end-stage osteoarthritis and three knees that had undergone TKR at more than one year's follow-up were investigated. In each knee, sequential biplane radiological images were acquired from the sagittal direction (i.e. horizontal X-ray source and 10° below horizontal) for a sequence of eight flexion angles. Three-dimensional implant or bone models were matched to the biplane images to compute the six degrees of freedom of PF tracking and TF kinematics, and other clinical measures. RESULTS: The mean and standard deviation for the six degrees of freedom of PF tracking and TF kinematics were computed. TF and PF kinematics were highly accurate (< 0.9 mm, < 0.6°) and repeatable. CONCLUSIONS: The developed method permitted measuring of in vivo PF tracking and TF kinematics before and after TKR throughout the range of movement. This method could be a useful tool for investigating differences between cohorts of patients (e.g., with and without pain) impacting clinical decision-making regarding surgical technique, revision surgery or implant design.
RESUMEN
Use of electronic animal identification technologies by livestock managers is increasing, but performance of these technologies can be variable when used in livestock production environments. This study was conducted to determine whether 1) read distance of low-frequency radio frequency identification (RFID) transceivers is affected by type of transponder being interrogated; 2) read distance variation of low-frequency RFID transceivers is affected by transceiver manufacturer; and 3) read distance of various transponder-transceiver manufacturer combinations meet the 2004 United States Animal Identification Plan (USAIP) bovine standards subcommittee minimum read distance recommendation of 60 cm. Twenty-four transceivers (n = 5 transceivers per manufacturer for Allflex, Boontech, Farnam, and Osborne; n = 4 transceivers for Destron Fearing) were tested with 60 transponders [n = 10 transponders per type for Allflex full duplex B (FDX-B), Allflex half duplex (HDX), Destron Fearing FDX-B, Farnam FDX-B, and Y-Tex FDX-B; n = 6 for Temple FDX-B (EM Microelectronic chip); and n = 4 for Temple FDX-B (HiTag chip)] presented in the parallel orientation. All transceivers and transponders met International Organization for Standardization 11784 and 11785 standards. Transponders represented both one-half duplex and full duplex low-frequency air interface technologies. Use of a mechanical trolley device enabled the transponders to be presented to the center of each transceiver at a constant rate, thereby reducing human error. Transponder and transceiver manufacturer interacted (P < 0.0001) to affect read distance, indicating that transceiver performance was greatly dependent upon the transponder type being interrogated. Twenty-eight of 30 combinations of transceivers and transponders evaluated met the minimum recommended USAIP read distance. The mean read distance across all 30 combinations was 45.1 to 129.4 cm. Transceiver manufacturer and transponder type interacted to affect read distance variance (P < 0.05). Maximum read distance performance of low-frequency RFID technologies with low variance can be achieved by selecting specific transponder-transceiver combinations.
Asunto(s)
Sistemas de Identificación Animal/normas , Dispositivo de Identificación por Radiofrecuencia/normas , Crianza de Animales Domésticos/instrumentación , Crianza de Animales Domésticos/métodos , Sistemas de Identificación Animal/instrumentación , Animales , Animales DomésticosRESUMEN
Asymmetric resection of the patella during total knee arthroplasty (TKA) correlates with anterior knee pain, bony impingement and patellar maltracking. Despite this, there is no consensus regarding the desired landmarks; the cut is often done freehand; and there has been no quantitative comparison of proposed resection planes. The objectives of this study were to: determine the intra- and inter-surgeon repeatability of two radiographic resection definitions (medial-divot, MD, and medial-lateral extents, MLE); calculate two additional definitions from the radiographic patellar circumferences (parallel to the anterior surface, ANT, and perpendicular to the anteroposterior tangent points, PERP); compare the clinical resection line to the previous four definitions before and after introducing the MD method clinically; and identify distinguishing features of patellae with better vs. worse resection angles. We hypothesized that the MD method would improve repeatability both radiographically and clinically, that the different radiographic definitions would produce comparable angles, and that we could identify distinguishing features. For the radiographic study, three surgeons drew lines on 40 preoperative X-rays plus 9 interspersed repetitions of 3 of these X-rays. For the clinical study, we compared the patellar resection angle for 20 patients immediately before and after implementing the new method. Given that the clinical goal is to have equal distances from the resection surface to the anterior surface, we compared all results to the ANT definition as the theoretically ideal definition. Confirming the first hypothesis, intra-surgeon repeatability (10 repetitions of 3 X-rays) and inter-surgeon repeatability (3 surgeons x 40 X-rays) were both significantly better using the new MD method compared to the MLE method (p<0.001). Contrary to the second hypothesis, clinical use of the MD method did not improve resection symmetry. Contrary to the third hypothesis, the PERP definition was significantly different from the other three definitions. In agreement with the fourth hypothesis, female patellae and more deformed patella had significantly greater asymmetry (p<0.001). Given the inherent variability shown in drawing the 'patellar horizon', we encourage researchers to draw the line several times and average the results when comparing tilt or the resection angle to this horizon. Based on the distinguishing characteristics of asymmetrically resurfaced patellae in our series, we recommend that clinicians be particularly careful when resecting laterally deformed patellae and the patellae of female patients.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/métodos , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Rótula/diagnóstico por imagen , Rótula/cirugía , Interpretación de Imagen Radiográfica Asistida por Computador/métodos , Cirugía Asistida por Computador/métodos , Algoritmos , Femenino , Humanos , Masculino , Radiografía Intervencional/métodos , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Resultado del TratamientoRESUMEN
BACKGROUND: Optimizing patellar tracking in total knee arthroplasty is a surgical priority. Despite this, a comparison of the effects of different component placements on patellar tracking is not available; the biomechanical impact of the patellar resection angle has not been studied; and the similarity between intraoperative and postoperative effects, fundamental to improving patellar tracking, is unknown. Our objective was to compare the impact of the major controllable femoral, tibial and patellar component positions on patellar kinematics during both passive and loaded flexion. METHODS: We tested eight cadaveric knee specimens in two rigs, simulating intraoperative and weightbearing flexion. Optoelectronic marker arrays were attached to the femur, tibia and patella to record kinematics throughout the range of motion. We modified posterior-stabilized fixed-bearing knee components to allow for five types of variations in component placement in addition to the neutral position: femoral component rotation, tibial component rotation, patellar resection angle, patellar component medialization and additional patellar thickness, for a total of 11 individual variations. FINDINGS: The major determinants of patellar tilt and shift were patellar component medialization, patellar resection angle and femoral component rotation. The relative order of these variables depended on the structure (bone or component), kinematic parameter (tilt or shift) and flexion angle (early or late flexion). Effects of component changes were consistent between the intraoperative and weightbearing rigs. INTERPRETATION: To improve patellar tracking, and thereby the clinical outcome, surgeons should focus on patellar component medialization, patellar resection angle and femoral component rotation. These have been linked with anterior knee pain as well. Neither tibial component rotation nor patellar thickness should be adjusted to improve patellar tracking.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/instrumentación , Artroplastia de Reemplazo de Rodilla/métodos , Articulación de la Rodilla/fisiopatología , Articulación de la Rodilla/cirugía , Modelos Biológicos , Examen Físico/métodos , Rango del Movimiento Articular , Simulación por Computador , Humanos , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
BACKGROUND: During knee replacement surgery, surgeons optimize intraoperative patellar tracking with the aim of optimizing postoperative tracking. This link has not been investigated to date. Our research questions were: (1) How well do patellar kinematics correlate between passive and weightbearing flexion across numerous changes in component placement? (2) How do the kinematics differ between the two loading configurations? METHODS: Eight cadaveric knee joints with modified knee components that allowed 11 different femoral, tibial and patellar placements were tested in two experimental rigs simulating intraoperative and weightbearing dynamic flexion. Baseline placement had all components in neutral position. Pearson correlation coefficients were calculated for absolute baseline kinematics and for relative kinematics due to changes in component position (i.e., the 10 altered positions vs. baseline). FINDINGS: Correlations between intraoperative and weightbearing rigs for absolute baseline kinematics were unpredictable, ranging from poor to excellent (mean 0.56 for tilt and mean 0.50 for shift). Correlations between rigs for changes in tilt and shift, i.e. relative kinematics, were strong (>0.8) or very strong (>0.9), with the exception of shift in early flexion (0.54). Differences in relative kinematics, which averaged 2.2 degrees in tilt (standard deviation 1.8 degrees ) and 1.6mm in shift (standard deviation 1.7mm), were notably smaller and less variable than differences in absolute kinematics, which averaged 4.2 degrees in tilt (standard deviation 3.6 degrees ) and 4.3mm in shift (standard deviation 3.9mm). INTERPRETATION: The results of this study suggest that, while absolute kinematics may differ between conditions, if a surgeon adjusts a component position to improve patellar kinematics intraoperatively, the effects of such a geometric change will likely carry through to the postoperative joint.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Rótula/fisiología , Anciano , Anciano de 80 o más Años , Cadáver , Femenino , Humanos , Periodo Intraoperatorio , Masculino , Persona de Mediana Edad , Distribución Aleatoria , Cirugía Asistida por Computador , Soporte de PesoRESUMEN
The orientation of the femoral component in hip resurfacing arthroplasty affects the likelihood of loosening and fracture. Computer-assisted surgery has been shown to improve significantly the surgeon's ability to achieve a desired position and orientation; nevertheless, both bias and variability in positioning remain and can potentially be improved. The authors recently developed a computer-assisted surgical (CAS) technique to guide the placement of the pin used in femoral head resurfacing arthroplasty and showed that it produced significantly less variation than a typical manual technique in varus/valgus placement relative to a preoperatively determined surgical plan while taking a comparable amount of time. In the present study, the repeatability of both the CAS and manual techniques is evaluated in order to estimate the relative contributions to overall variability of surgical technique (CAS versus manual), surgeon experience (novice versus experienced), and other sources of variability (e.g. across specimens and across surgeons). This will enable further improvements in the accuracy of CAS techniques. Three residents/fellows new to femoral head resurfacing and three experienced hip arthroplasty surgeons performed 20-30 repetitions of each of the CAS and manual techniques on at least one of four cadaveric femur specimens. The CAS system had markedly better repeatability (1.2 degrees) in varus/valgus placement relative to the manual technique (2.8 degrees), slightly worse repeatability in version (4.4 degrees versus 3.2 degrees), markedly better repeatability in mid-neck placement (0.7 mm versus 2.5 mm), no significant dependence on surgeon skill level (in contrast to the manual technique), and took significantly less time (50 s versus 123 s). Proposed improvements to the version measurement process showed potential for reducing the standard deviation by almost two thirds. This study supports the use of CAS for femoral head resurfacing as it is quicker than the manual technique, independent of surgeon experience, and demonstrates improved repeatability.
Asunto(s)
Artroplastia de Reemplazo de Cadera/instrumentación , Artroplastia de Reemplazo de Cadera/métodos , Clavos Ortopédicos , Cabeza Femoral/cirugía , Cirugía Asistida por Computador/instrumentación , Cirugía Asistida por Computador/métodos , Análisis y Desempeño de Tareas , Humanos , Reproducibilidad de los Resultados , Robótica/métodos , Sensibilidad y EspecificidadRESUMEN
OBJECTIVES: To illustrate the advantages of an open-ended formative evaluation approach using a project-specific selection of methods over the controlled trial approach in the evaluation of health information systems. To illustrate factors leading to success and others impeding it in a telehealth project. METHODS: The methods and results of an evaluation of the BC Telehealth Program are summarized. RESULTS: The evaluation gave a comprehensive picture of the project, including assessment of the effects of an array of telehealth applications, and their economic impact. Factors leading to success and others preventing it are identified from the level of overall program management to the project specifics. The results include unanticipated effects and explanations for their reasons of occurrence. Neither the comprehensiveness of information nor the timeliness was achieved in a related project using a controlled trial approach. CONCLUSIONS: Not all types of health information system projects can be evaluated using the controlled trial approach. This approach may impede important insights. It is also usually much less efficient. Funding agencies and journal editors have to take this into account when selecting projects for funding and submissions for publication.
Asunto(s)
Estudios de Evaluación como Asunto , Informática Médica , Colombia Británica , Estudios de Casos Organizacionales , TelemedicinaRESUMEN
PURPOSE: To present the lessons learned from an evaluation of a comprehensive telehealth project regarding success factors and evaluation methodology for such projects. METHODS: A recent experience with the evaluation of new telehealth services in BC, Canada, is summarized. Two domains of clinical applications, as well as educational and administrative uses, and the project environment were evaluated. In order to contribute to the success of the project, the evaluation included formative and summative approaches employing qualitative and quantitative methods with data collection from telehealth events, participants and existing databases. The evaluation had to be carried out under severe budgetary and time constraints. We therefore deliberately chose a broad ranging exploratory approach within a framework provided, and generated questions to be answered on the basis of initial observations and participant driven interviews with progressively more focused and detailed data gathering, including perusal of a variety of existing data sources. A unique feature was an economic evaluation using static simulation models. RESULTS: The evaluation yielded rich and detailed data, which were able to explain a number of unanticipated findings. One clinical application domain was cancelled after 6 months, the other continues. The factors contributing to success include: Focus on chronic conditions which require visual information for proper management. Involvement of established teams in regular scheduled visits or in sessions scheduled well in advance. Problems arose with: Ad hoc applications, in particular under emergency conditions. Applications that disregard established referral patterns. Applications that support only part of a unit's services. The latter leads to the service mismatch dilemma (SMMD) with the end result that even those e-health services provided are not used. The problems encountered were compounded by issues arising from the manner in which the telehealth services had been introduced, in particular the lack of time for preparation and establishment of routine use. Educational applications had significant clinical benefits. Administrative applications generated savings which exceeded the substantial capital investment and made educational and clinical applications available at variable cost. CONCLUSION: Evaluation under severe constraints can yield rich information. The identified success factors, including provision of an overarching architecture and infrastructure, strong program management, thorough needs analysis and detailing applications to match the identified needs should improve the sustainability of e-health projects. Insights gained: Existing assumptions before the study was conducted: Evaluation has to proceed from identified questions according to a rigorous experimental design. Emergency and trauma services in remote regions can and should be supported via telehealth based on video-conferencing. Educational applications of telehealth directed at providers are beneficial for recruitment and retention of providers in remote areas. Insights gained by the study: An exploratory approach to evaluation using a multiplicity of methods can yield rich and detailed information even under severe constraints. Ad hoc and emergency clinical applications of telehealth can present problems unless they are based on thorough, detailed analyses of environment and need, conform to established practice patterns and rely on established trusting collaborative relationships. Less difficult applications should be introduced before attempting to support use under emergency conditions. Educational applications are of interest beyond the provider community to patients, family and community members, and have clinical value. In large, sparsely populated areas with difficult travel conditions administrative applications by themselves generate savings that compensate for the substantial capital investment for telehealth required for clinical applications.
Asunto(s)
Difusión de Innovaciones , Telemedicina , Colombia Británica , Servicio de Urgencia en Hospital , Entrevistas como Asunto , Servicios de Salud Materna , Informática Médica , Estudios de Casos Organizacionales , Desarrollo de Programa , Garantía de la Calidad de Atención de Salud , Telemedicina/economía , Telemedicina/organización & administración , Telemedicina/estadística & datos numéricosRESUMEN
PURPOSE: To review the experience with a province-wide telehealth system in Canada, and its implications for health care and health promotion. To explore whether group support systems (GSS) based on networked computers can substitute for video conferencing technology. METHODS: Key results of the evaluation of the BC Telehealth Program are summarized. The potential of extending the successful principles through use of GSS is explored based on literature review, demonstrations, and trial use for educational applications. RESULTS: The BC Telehealth Program was designed to support health professionals at secondary care facilities, such as regional and district hospitals in two application domains: children's and women's health (C&W) and emergency room and trauma care (ER-Trauma). Successful applications extended beyond health professionals and focused on chronic conditions, the management of which is contingent on visual information, and involves established teams in regular scheduled visits or in sessions scheduled well in advance. Ad hoc applications, in particular applications under emergency conditions proved problematic. Administrative applications in support of telehealth implementation, e.g., through facilitation of management and provider education, are essential for clinical success. Savings from support of administrative applications exceeded the substantial capital investment and made educational and clinical applications available at variable cost. Educational applications were shown to have significant clinical benefits. Exploration of GSS technology showed that it may not be mature enough to substitute for video conferencing technology in support of sophisticated training and education aiming at clinical impact. CONCLUSION: The substantial clinical and efficiency gains provided by video conferencing-based telehealth may for now continue to depend on mature video-conferencing technology.
Asunto(s)
Promoción de la Salud/organización & administración , Telemedicina/organización & administración , Comunicación por Videoconferencia , Colombia Británica , Educación Médica , Procesos de Grupo , Promoción de la Salud/métodos , Promoción de la Salud/normas , Administración de los Servicios de Salud , Humanos , Evaluación de Programas y Proyectos de Salud , Regionalización/organización & administración , Especialización , Telemedicina/métodos , Telemedicina/normasRESUMEN
Fixation of the glenoid component is critical to the outcome of total shoulder arthroplasty. In an in vitro study, we analysed the effect of surface design and thickness of the cement mantle on the pull-out strength of the polyethylene pegs which are considered essential for fixation of cemented glenoid components. The macrostructure and surface of the pegs and the thickness of the cement mantle were studied in human glenoid bone. The lowest pull-out forces, 20 +/- 5 N, were for cylindrical pegs with a smooth surface fixed in the glenoid with a thin cement mantle. The highest values, 425 +/- 7 N, were for threaded pegs fixed with a thicker cement mantle. Increasing the diameter of the hole into which the peg is inserted from 5.2 to 6.2 mm thereby increasing the thickness of the cement mantle, improved the mean pull-out force for the pegs tested.
Asunto(s)
Artroplastia de Reemplazo/métodos , Cementos para Huesos , Articulación del Hombro/cirugía , Materiales Biocompatibles , Cadáver , Diseño de Equipo , Humanos , Ensayo de Materiales , Polietileno , Falla de Prótesis , Estrés MecánicoRESUMEN
OBJECTIVE: The purpose of this pilot study (n=3) was to compare the loosening performance of glenoid prosthesis design pairs where only one design variable differed. DESIGN: Glenoids were subjected to dynamic edge loading in a biaxial test setup. BACKGROUND: Glenoid component loosening is the primary concern in total shoulder arthroplasty. METHODS: After the humeral head was cycled 100,000 times to the superior and inferior edges of the glenoid, the tensile edge displacements were measured under superior and inferior off-center loading. RESULTS AND CONCLUSIONS: Based on this study, a rough-backed design had dramatically better loosening performance than a smooth-backed; curved-backed was superior to flat-backed; a less-constrained articular surface was better than a more-constrained articular surface; pegs outperformed a keel; threaded pegs were marginally preferable to cylindrical pegs; and an all-polyethylene design rocked slightly less than a metal-mesh-backed design. RELEVANCE: A comparison of the laboratory loosening behavior of glenoid prostheses may lead to improved designs, subsequently leading to a reduction in the incidence of clinical loosening.
Asunto(s)
Prótesis Articulares , Falla de Prótesis , Articulación del Hombro , Fenómenos Biomecánicos , Humanos , Prótesis Articulares/efectos adversos , Proyectos Piloto , Diseño de Prótesis , Articulación del Hombro/fisiopatologíaRESUMEN
Interest in arm movements has increased tremendously in recent years. This interest has been motivated by different goals: the desire for a more scientific approach to replacement or support of the joints of the upper limb, the need for input to biomechanical computer models, and the clinical interest in comparing normal movements with pathological movements. The availability of commercial marker-tracking systems has facilitated achieving these goals. However, the complex nature of arm movements and the lack of standardized movements raises many challenges. In comparison with gait analysis, few arm motion analyses have been conducted. The purpose of this review is to aid researchers and clinicians interested in conducting an arm motion study in choosing the appropriate methodology. This is accomplished both by describing the methods used in past investigations and by highlighting important findings. Due to the variety of research goals, there is sometimes more than one appropriate method and the choice is left to the reader. Nevertheless, since it is extremely desirable to record and express the data in a standardized way, standardization proposals are described. This review, which focuses on methodology rather than results, addresses the following topics: motivations and tasks studied, tracking methods, the shoulder complex, joint centres and rotation axes, marker positions, coordinate system definitions, terminology and rotations, accuracy, and presentation methods.