RESUMEN
In recent years, tubular nanostructures have been related to immense advances in various fields of science and technology. Considerable research efforts have been centred on the theoretical prediction and manufacturing of non-carbon nanotubes (NTs), which meet modern requirements for the development of novel devices and systems. In this context, diatomic inorganic nanotubes formed by atoms of elements from the 13th group of the periodic table (B, Al, Ga, In, Tl) and nitrogen (N) have received much research attention. In this study, the elastic properties of single-walled boron nitride, aluminium nitride, gallium nitride, indium nitride, and thallium nitride nanotubes were assessed numerically using the nanoscale continuum modelling approach (also called molecular structural mechanics). The elastic properties (rigidities, surface Young's and shear moduli, and Poisson's ratio) of nitride nanotubes are discussed with respect to the bond length of the corresponding diatomic hexagonal lattice. The results obtained contribute to a better understanding of the mechanical response of nitride compound-based nanotubes, covering a broad range, from the well-studied boron nitride NTs to the hypothetical thallium nitride NTs.
RESUMEN
Two-dimensional (2D) nanostructures of aluminum nitride (AlN) and gallium nitride (GaN), called nanosheets, have a graphene-like atomic arrangement and represent novel materials with important upcoming applications in the fields of flexible electronics, optoelectronics, and strain engineering, among others. Knowledge of their mechanical behavior is key to the correct design and enhanced functioning of advanced 2D devices and systems based on aluminum nitride and gallium nitride nanosheets. With this background, the surface Young's and shear moduli of AlN and GaN nanosheets over a wide range of aspect ratios were assessed using the nanoscale continuum model (NCM), also known as the molecular structural mechanics (MSM) approach. The NCM/MSM approach uses elastic beam elements to represent interatomic bonds and allows the elastic moduli of nanosheets to be evaluated in a simple way. The surface Young's and shear moduli calculated in the current study contribute to building a reference for the evaluation of the elastic moduli of AlN and GaN nanosheets using the theoretical method. The results show that an analytical methodology can be used to assess the Young's and shear moduli of aluminum nitride and gallium nitride nanosheets without the need for numerical simulation. An exploratory study was performed to adjust the input parameters of the numerical simulation, which led to good agreement with the results of elastic moduli available in the literature. The limitations of this method are also discussed.
RESUMEN
Hexagonal boron nitride (h-BN) nanosheets are attractive materials for various applications that require efficient heat transfer, surface adsorption capability, biocompatibility, and flexibility, such as optoelectronics and power electronics devices, nanoelectromechanical systems, and aerospace industry. Knowledge of the mechanical behavior of boron nitride nanosheets is necessary to achieve accurate design and optimal performance of h-BN-based nanodevices and nanosystems. In this context, the Young's and shear moduli and Poisson's ratio of square and rectangular boron nitride nanosheets were evaluated using the nanoscale continuum modeling approach, also known as molecular structural mechanics. The latter allows robust and rapid assessment of the elastic constants of nanostructures with graphene-like lattices. To date, there is a lack of systematic research regarding the influence of input parameters for numerical simulation, loading conditions, size, and aspect ratio on the elastic properties of the h-BN nanosheets. The current study contributes to filling this gap. The results allow, on the one hand, to point out the input parameters that lead to better agreement with those available in the literature. On the other hand, the Young's and shear moduli, and Poisson's ratio calculated in the present work contribute to a benchmark for the evaluation of elastic constants of h-BN nanosheets using theoretical methods.
RESUMEN
One-dimensional (nanotubes) and two-dimensional (nanosheets) germanium carbide (GeC) and tin carbide (SnC) structures have been predicted and studied only theoretically. Understanding their mechanical behaviour is crucial, considering forthcoming prospects, especially in batteries and fuel cells. Within this framework, the present study aims at the numerical evaluation of the elastic properties, surface Young's and shear moduli and Poisson's ratio, of GeC and SnC nanosheets and nanotubes, using a nanoscale continuum modelling approach. A robust methodology to assess the elastic constants of the GeC and SnC nanotubes without of the need for numerical simulation is proposed. The surface Young's and shear moduli of the GeC and SnC nanotubes and nanosheets are compared with those of their three-dimensional counterparts, to take full advantage of 1D and 2D germanium carbide and tin carbide in novel devices. The obtained outcomes establish a solid basis for future explorations of the mechanical behaviour of 1D and 2D GeC and SnC nanostructures, where the scarcity of studies is evident.
RESUMEN
Silicon carbide nanotubes (SiCNTs) have generated significant research interest due to their potential use in the fabrication of electronic and optoelectronic nanodevices and biosensors. The exceptional chemical, electrical and thermal properties of SiCNTs are beneficial for their application in high-temperature and harsh-environments. In view of the limited thermal stability of carbon nanotubes, they can be replaced by silicon carbide nanotubes in reinforced composites, developed for operations at high temperatures. However, fundamentally theoretical studies of the mechanical properties of the silicon carbide nanotubes are at an early stage and their results are still insufficient for designing and exploiting appropriate nanodevices based on SiCNTs and reinforced composites. In this context, the present study deals with the determination of Young's and shear moduli of non-chiral single-walled silicon carbide nanotubes, using a three-dimensional finite element model.
RESUMEN
After a large-scale investigation into carbon nanotubes, significant research efforts have been devoted to discovering and synthesizing other nanotubes formed by chemical elements other than carbon. Among them, non-carbon nanotubes based on compounds of the elements of the 13th group of the periodic table and phosphorus. These inorganic nanotubes have proved to be more suitable candidates than carbon nanotubes for the construction of novel electronic and optical-electronic nano-devices. For this reason, until recently, mainly the structural and electrical properties of phosphide nanotubes were investigated, and studies to understand their mechanical behavior are infrequent. In the present work, the elastic properties of single-walled boron phosphide, aluminum phosphide, gallium phosphide and indium phosphide nanotubes were numerically evaluated using a nanoscale continuum modelling (also called molecular structural mechanics) approach. The force field constants required to assess the input parameters for numerical simulations were calculated for boron phosphide, aluminum phosphide, gallium phosphide and indium phosphide nanostructures using two different methods. The influence of input parameters on the elastic properties evaluated by numerical simulation was studied. A robust methodology to calculate the surface elastic moduli of phosphide nanotubes is proposed.
RESUMEN
Low-dimensional structures, such as nanotubes, have been the focus of research interest for approximately three decades due to their potential for use in numerous applications in engineering and technology. In addition to extensive investigation of carbon nanotubes, those composed of elements other than carbon, the so-called non-carbon nanotubes, have also begun to be studied, since they can be more suitable for electronic and optical nano-devices than their carbon counterparts. As in the case of carbon nanotubes, theoretical (numerical and analytical) approaches have been established predominantly to study non-carbon nanotubes. So far, most of work has dealt with the investigation of the structural and electrical properties of non-carbon nanotubes, paying less attention to the evaluation of their mechanical properties. As the understanding of the mechanical behaviour of the constituents is fundamental to ensure the effective performance of nanotube-based devices, this overview aims to analyse and systematize the literature results on the elastic properties of inorganic non-carbon nanotubes.
RESUMEN
Exoelectrogenic microorganisms are in the spotlight due to their unique respiratory mechanisms and potential applications in distinct biotechnological fields, including bioremediation, bioenergy production and microbial electrosynthesis. These applications rely on the capability of these microorganisms to perform extracellular electron transfer, a mechanism that allows the bacteria to transfer electrons to the cell's exterior by establishing functional interfaces between different multiheme cytochromes at the inner membrane, periplasmic space, and outer membrane. The multiheme cytochrome CbcL from Geobacter sulfurreducens is associated to the inner membrane and plays an essential role in the transfer of electrons to final electron acceptors with a low redox potential, as Fe(III) oxides and electrodes poised at -100 mV. CbcL has a transmembranar di-heme b-type cytochrome domain with six helices, linked to a periplasmic cytochrome domain with nine c-type heme groups. The complementary usage of ultraviolet-visible, circular dichroism and nuclear magnetic resonance permitted the structural and functional characterization of CbcL's periplasmic domain. The protein was found to have a high percentage of disordered regions and its nine hemes are low-spin and all coordinated by two histidine residues. The apparent midpoint reduction potential of the CbcL periplasmic domain was determined, suggesting a thermodynamically favorable transfer of electrons to the putative redox partner in the periplasm - the triheme cytochrome PpcA. The establishment of a redox complex between the two proteins was confirmed by probing the electron transfer reaction and the molecular interactions between CbcL and PpcA. The results obtained show for the first time how electrons are injected into the periplasm of Geobacter sulfurreducens for subsequent transfer to the cell's exterior.
RESUMEN
The elastic properties of chiral and non-chiral single-walled boron nitride nanotubes in a wide range of their chiral indices and diameters were studied. With this aim, a three-dimensional finite element model was used to assess their rigidities and, subsequently, elastic moduli and Poisson's ratio. An extensive study was performed to understand the impact of the input parameters on the results obtained by numerical simulation. For comparison, the elastic properties of single-walled boron nitride nanotubes are shown together with those obtained for single-walled carbon nanotubes.
RESUMEN
The elastic properties of single-walled carbon nanotube heterojunctions were investigated using conventional tensile, bending and torsion tests. A three-dimensional finite element model was built in order to describe the elastic behaviour of cone heterojunctions (armchair-armchair and zigzag-zigzag). This comprehensive systematic study, to evaluate the tensile, bending and torsional rigidities of heterojunctions, enabled the formulation analytical methods for easy assessment of the elastic properties of heterojunctions using a wide range of their geometrical parameters.
RESUMEN
The elastic properties of armchair and zigzag multiwalled carbon nanotubes were investigated under tensile, bending, and torsion loading conditions. A simplified finite element model of the multiwalled carbon nanotubes, without taking into account the van der Waals interactions between layers, was used to assess their tensile, bending, and torsional rigidities and, subsequently, Young's and shear moduli. Relationships between the tensile rigidity and the squares of the diameters of the outer and inner layers in multiwalled carbon nanotubes, and between the bending and torsional rigidities with the fourth powers of the diameters of the outer and inner layers, were established. These relationships result in two consistent methods, one for assessment to the Young's modulus of armchair and zigzag multiwalled carbon nanotubes, based on tensile and bending rigidities, and the other to evaluate shear modulus using tensile, bending, and torsional rigidities. This study provides a benchmark regarding the determination of the mechanical properties of nonchiral multiwalled carbon nanotubes by nanoscale continuum modeling approach.
RESUMEN
Influenza virus is one of the most devastating human pathogens. In order to infect host cells, this virus fuses its membrane with the host membrane in a process mediated by the glycoprotein hemagglutinin. During fusion, the N-terminal region of hemagglutinin, which is known as the fusion peptide (FP), inserts into the host membrane, promoting lipid mixing between the viral and host membranes. Therefore, this peptide plays a key role in the fusion process, but the exact mechanism by which it promotes lipid mixing is still unclear. To shed light into this matter, we performed molecular dynamics (MD) simulations of the influenza FP in different environments (water, dodecylphosphocholine (DPC) micelles, and a dimyristoylphosphatidylcholine (DMPC) membrane). While in pure water the peptide lost its initial secondary structure, in simulations performed in the presence of DPC micelles it remained stable, in agreement with previous experimental observations. In simulations performed in the presence of a preassembled DMPC bilayer, the peptide became unstructured and was unable to insert into the membrane as a result of technical limitations of the method used. To overcome this problem, we used a self-assembly strategy, assembling the membrane together with the peptide. These simulations revealed that the peptide can adopt a membrane-spanning conformation, which had not been predicted by previous MD simulation studies. The peptide insertion had a strong effect on the membrane, lowering the bilayer thickness, disordering nearby lipids, and promoting lipid tail protrusion. These results contribute to a better understanding of the role of the FP in the fusion process.