RESUMEN
Air pollution originating from the household presents a significant burden to public health, especially during the wintertime in countries, such as Poland, where coal substantially contributes to the energy market. One of the most hazardous components of particulate matter is benzo(a)pyrene (BaP). This study focusses on the impact of different meteorological conditions on BaP concentrations in Poland and associated impacts on human health and economic burdens. For this study, we used the EMEP MSC-W atmospheric chemistry transport model with meteorological data from the Weather Research and Forecasting model to analyze the spatial and temporal distribution of BaP over Central Europe. The model setup has two nested domains, with the inner domain at 4 km × 4 km over Poland, which is a hotspot for BaP concentrations. The outer domain covers countries surrounding Poland in coarser resolution (12 × 812 km), to ensure that transboundary pollution is properly characterized in the modelling. We investigated the sensitivity to variability in winter meteorological conditions on BaP levels and impacts using data from 3 years: 1) 2018, which represents average meteorological conditions during the winter season (BASE run), 2) 2010 with a cold winter (COLD), and 3) 2020 with a warm winter (WARM). The ALPHA-RiskPoll model was used to analyze the lung cancer cases and associated economic costs. The results show that the majority of Poland exceeds the target level of benzo(a)pyrene (1 ng m-3) mainly due to high concentrations during the cold months. High concentrations of BaP have serious health implications and the number of lung cancers in Poland due to BaP exposure varies from 57 to 77 cases for the WARM and COLD years, respectively. It is reflected in the economic costs, which ranged from 136, through 174 to 185 million euros/year for the WARM, BASE and COLD model runs, respectively.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Neoplasias Pulmonares , Humanos , Benzo(a)pireno/análisis , Contaminantes Atmosféricos/análisis , Material Particulado/análisis , Contaminación del Aire/análisis , Neoplasias Pulmonares/epidemiologíaRESUMEN
Simulation models can be valuable tools in supporting development of air pollution policy. However, exploration of future scenarios depends on reliable and robust modelling to provide confidence in outcomes which cannot be tested against measurements. Here we focus on the UK Integrated Assessment Model, a fast reduced-form model with a purpose to support policy development with modelling of multiple alternative future scenarios, and the EMEP4UK model which is a complex Eulerian Atmospheric Chemistry Transport Model requiring significant computing resources. The EMEP4UK model has been used to model selected core scenarios to compare with UKIAM, and to investigate sensitivity studies such as the interannual variability in response to meteorological differences between years. This model intercomparison addresses total PM2.5, primary PM2.5 and Secondary Inorganic Aerosol concentrations for a baseline of 2018 and selected scenarios for projections to 2040. This work has confirmed the robustness of the UK Integrated Assessment Model for assessing alternative futures through a direct comparison with EMEP4UK. Both models have shown good agreement with measurements, and EMEP4UK shows an ability to replicate past trends. These comparisons highlight how a combination of reduced-form modelling (UKIAM) and complex chemical transport modelling (EMEP4UK) can be effectively used in support of air pollution policy development, informing understanding of projected futures in the context of emerging evidence and uncertainties.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Predicción , Material Particulado/análisis , Monitoreo del AmbienteRESUMEN
Source apportionment and the effect of reducing individual sources is important input for the development of strategies to address air pollution. The UK Integrated Assessment Model, UKIAM, has been developed for this purpose as a flexible framework, combining information from different atmospheric dispersion models to cover different pollutant contributions, and span the range from European to local scale. In this paper we describe the UKIAM as developed for SO2, NOx, NH3, PM2.5 and VOCs. We illustrate its versatility and application with assessment of current PM2.5 concentrations and exposure of the UK population, as a case-study that has been used as the starting point to investigate potential improvement towards attainment of the WHO guideline of 10 µg/m3.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Contaminación del Aire/prevención & control , Monitoreo del Ambiente , Material Particulado/análisis , Políticas , Reino UnidoRESUMEN
In this study CO2 and NOx emissions from 149 Euro 5 and 6 diesel, gasoline and hybrid passenger cars were compared using a Portable Emissions Measurement System (PEMS). The models sampled accounted for 56% of all passenger cars sold in Europe in 2016. We found gasoline vehicles had CO2 emissions 13-66% higher than diesel. During urban driving, the average CO2 emission factor was 210.5 (sd. 47) gkm-1 for gasoline and 170.2 (sd. 34) gkm-1 for diesel. Half the gasoline vehicles tested were Gasoline Direct Injection (GDI). Euro 6 GDI engines <1.4â delivered ~17% CO2 reduction compared to Port Fuel Injection (PFI). Gasoline vehicles delivered an 86-96% reduction in NOx emissions compared to diesel cars. The average urban NOx emission from Euro 6 diesel vehicles 0.44 (sd. 0.44) gkm-1 was 11 times higher than for gasoline 0.04 (sd. 0.04) gkm-1. We also analysed two gasoline-electric hybrids which out-performed both gasoline and diesel for NOx and CO2. We conclude action is required to mitigate the public health risk created by excessive NOx emissions from modern diesel vehicles. Replacing diesel with gasoline would incur a substantial CO2 penalty, however greater uptake of hybrid vehicles would likely reduce both CO2 and NOx emissions. Discrimination of vehicles on the basis of Euro standard is arbitrary and incentives should promote vehicles with the lowest real-world emissions of both NOx and CO2.
RESUMEN
The city of London, UK, has seen in recent years an increase in the number of high-rise/multi-storey buildings ("skyscrapers") with roof heights reaching 150 m and more, with the Shard being a prime example with a height of â¼310 m. This changing cityscape together with recent plans of local authorities of introducing Combined Heat and Power Plant (CHP) led to a detailed study in which CFD and wind tunnel studies were carried out to assess the effect of such high-rise buildings on the dispersion of air pollution in their vicinity. A new, open-source simulator, FLUIDITY, which incorporates the Large Eddy Simulation (LES) method, was implemented; the simulated results were subsequently validated against experimental measurements from the EnFlo wind tunnel. The novelty of the LES methodology within FLUIDITY is based on the combination of an adaptive, unstructured, mesh with an eddy-viscosity tensor (for the sub-grid scales) that is anisotropic. The simulated normalised mean concentrations results were compared to the corresponding wind tunnel measurements, showing for most detector locations good correlations, with differences ranging from 3% to 37%. The validation procedure was followed by the simulation of two further hypothetical scenarios, in which the heights of buildings surrounding the source building were increased. The results showed clearly how the high-rise buildings affected the surrounding air flows and dispersion patterns, with the generation of "dead-zones" and high-concentration "hotspots" in areas where these did not previously exist. The work clearly showed that complex CFD modelling can provide useful information to urban planners when changes to cityscapes are considered, so that design options can be tested against environmental quality criteria.
Asunto(s)
Contaminantes Atmosféricos/análisis , Contaminación del Aire/estadística & datos numéricos , Ciudades , Monitoreo del Ambiente , Viento , Contaminación del Aire/análisis , Londres , Modelos Teóricos , Fenómenos FísicosRESUMEN
Integrated assessment modelling has evolved to support policy development in relation to air pollutants and greenhouse gases by providing integrated simulation tools able to produce quick and realistic representations of emission scenarios and their environmental impacts without the need to re-run complex atmospheric dispersion models. The UK Integrated Assessment Model (UKIAM) has been developed to investigate strategies for reducing UK emissions by bringing together information on projected UK emissions of SO2, NOx, NH3, PM10 and PM2.5, atmospheric dispersion, criteria for protection of ecosystems, urban air quality and human health, and data on potential abatement measures to reduce emissions, which may subsequently be linked to associated analyses of costs and benefits. We describe the multi-scale model structure ranging from continental to roadside, UK emission sources, atmospheric dispersion of emissions, implementation of abatement measures, integration with European-scale modelling, and environmental impacts. The model generates outputs from a national perspective which are used to evaluate alternative strategies in relation to emissions, deposition patterns, air quality metrics and ecosystem critical load exceedance. We present a selection of scenarios in relation to the 2020 Business-As-Usual projections and identify potential further reductions beyond those currently being planned.
Asunto(s)
Contaminación del Aire/prevención & control , Ambiente , Predicción , Modelos Teóricos , Atmósfera/química , Conservación de los Recursos Naturales/economía , Conservación de los Recursos Naturales/tendencias , Humanos , Reproducibilidad de los Resultados , Reino Unido , Población UrbanaRESUMEN
Integrated Assessment, and the development of strategies to reduce the impacts of air pollution, has tended to focus only upon the direct emissions from different sources, with the indirect emissions associated with the full life-cycle of a technology often overlooked. Carbon Capture and Storage (CCS) reflects a number of new technologies designed to reduce CO2 emissions, but which may have much broader environmental implications than greenhouse gas emissions. This paper considers a wider range of pollutants from a full life-cycle perspective, illustrating a methodology for assessing environmental impacts using source-apportioned effects based impact factors calculated by the national scale UK Integrated Assessment Model (UKIAM). Contrasting illustrative scenarios for the deployment of CCS towards 2050 are presented which compare the life-cycle effects of air pollutant emissions upon human health and ecosystems of business-as-usual, deployment of CCS and widespread uptake of IGCC for power generation. Together with estimation of the transboundary impacts we discuss the benefits of an effects based approach to such assessments in relation to emissions based techniques.
Asunto(s)
Contaminantes Atmosféricos/análisis , Contaminación del Aire/estadística & datos numéricos , Dióxido de Carbono/análisis , Secuestro de Carbono , Conservación de los Recursos Naturales , Ambiente , Monitoreo del Ambiente , Efecto Invernadero , Humanos , Modelos QuímicosRESUMEN
The range of atmospheric dispersion models available for use in emergency situations varies from simple straight Gaussian plume simulations to complex computer codes attempting to allow for site-specific topographical features where the restriction of running in real time becomes significant. Various factor influence the choice of model; there are rather different needs and constraints for (a) training exercises, (b) early, (c) intermediate and (d) recovery phases of an actual accident. In selecting appropriate dispersion models it is necessary to define the objectives - for example what spectrum of accidents is to be considered and what surrounding area, and how will the model be linked with a monitoring programme (specifically the availability of early measurements and the evaluation of source terms). The model must predict the quantities of interest to the user, and results must be displayed in an unambiguous and convenient form. Thus spatial distributions at a specific time may be an asset as well as integrated doses, and deposited activity (dry and wet) as well as air concentrations. There will also be site-specific questions related to the complexity of the environs and the availability of extra meteorological information (e.g. vertical wind soundings or precipitation data). Nor must the constraints of time and resources and simplicity for the user be forgotten. (AU)