RESUMEN
Despite considerable improvements in oral health, dental caries remains a public health issue. The most frequently used technique to remove caries is through rotating drills. New minimally invasive strategies were introduced into dental practice, such as the use of lasers to perform highly controlled tissue ablation while limiting pain and discomfort, as well as overcoming drill phobia. The objective was to assess and compare treatment with Er:YAG laser versus a conventional rotary treatment during cavity preparation in children with regard to bond interface quality. In a randomized trial using a split-mouth design, 40 (9-12 year-old) children with 80 carious primary molars were included. The cavity in one quadrant was treated conventionally using a bur, while the cavity in the other quadrant was prepared using an Er:YAG laser. Twenty restored teeth were extracted after one year. The SEM histological evaluation of bond interface results demonstrated no statistically significant differences between restorations placed following bur preparation and those placed following the Er:YAG laser preparation, and both treatments demonstrated promising results. Over a one-year period, no statistically significant differences in the bond interface quality were observed following class I cavity preparation in primary teeth with either Er:YAG laser or a conventional rotary bur.
RESUMEN
OBJECTIVES: This study aimed to compare the surface roughness and friction of different orthodontic archwires after exposure to salbutamol sulphate inhalation, an anti-asthmatic medication. METHODS: Orthodontic archwires (stainless-steel [StSt], nickel-titanium [NiTi], beta-titanium [ß-Ti], and copper-NiTi [Cu-NiTi]) were equally divided into two groups. The exposed groups were subjected to 20 mg salbutamol sulphate for 21 days and kept in artificial saliva. The control groups were only kept in artificial saliva. Surface changes were visualized using scanning electron microscopy (SEM). The average surface roughness (Ra) was evaluated using atomic force microscopy (AFM), and friction resistance forces were assessed using a universal testing machine. Statistical analyses were performed using t-tests and ANOVA followed by post hoc tests. RESULTS: Salbutamol sulphate did not change the surface roughness of StSt and NiTi archwires (p > .05). However, the change in the surfaces of ß-Ti and Cu-NiTi archwires was significant (p < .001). The frictional forces of exposed StSt, NiTi, and Cu-NiTi archwires did not change (p > .05). However, the frictional forces of ß-Ti archwires increased significantly after exposure to salbutamol sulphate (p = .021). Brushing with fluoride after exposure to salbutamol sulphate increased the frictional forces of ß-Ti only (p = .002). CONCLUSIONS: Salbutamol sulphate inhalation significantly affected the surface texture of ß-Ti and Cu-NiTi orthodontic archwires and increased the friction of ß-Ti archwires. These deteriorating effects were not detected on the surface of StSt and NiTi archwires. Therefore, we suggest that ß-Ti and copper titanium archwires should be used cautiously in individuals under salbutamol sulphate inhalation treatment.
Asunto(s)
Albuterol , Cobre , Microscopía de Fuerza Atómica , Microscopía Electrónica de Rastreo , Níquel , Alambres para Ortodoncia , Propiedades de Superficie , Titanio , Albuterol/administración & dosificación , Níquel/química , Cobre/química , Titanio/química , Humanos , Antiasmáticos/administración & dosificación , Acero Inoxidable/química , Fricción/efectos de los fármacos , Administración por Inhalación , Ensayo de Materiales , Saliva Artificial/química , Aleaciones Dentales/químicaRESUMEN
OBJECTIVE: The aim of this study was to assess the accuracy of formula-based volume measurements and the 3D volume analysis with different software packages in the calculation of preoperative cystic jaw lesions' volume. The secondary aim was to assess the reliability and the accuracy of 3 imaging software programs for measuring the cystic jaw lesions' volume in CBCT images. MATERIALS AND METHODS: This study consisted of two parts: an in vitro part using 2 dry human mandibles that were used to create simulated osteolytic lesions to assess the accuracy of the volumetric analysis and formula-based volume. As a gold standard, the volume of each bone defect was determined by taking an impression using rapid soft silicone (Vinylight) and then quantifying the volume of the replica. Afterward, each tooth socket was scanned using a high-resolution CBCT. A retrospective part using archived CBCT radiographs that were taken from the database of the outpatient clinic of the oral and maxillofacial radiology department, Faculty of Dentistry, Minia University to assess the reliability of the 3 software packages. The volumetric data set was exported for volume quantification using the 3 software packages (MIMICS-OnDemand and InVesalius software). Also, the three greatest orthogonal diameters of the lesions were calculated, and the volume was assessed using the ellipsoid formula. Dunn's test was used for pair-wise comparisons when Friedman's test was significant. The inter-examiner agreement was assessed using Cronbach's alpha reliability coefficient and intra-class correlation coefficient. RESULTS: Regarding the results of the retrospective part, there was a statistically significant difference between volumetric measurements by equation and different software (P value < 0.001, Effect size = 0.513). The inter-observer reliability of the measurements of the cystic lesions using the different software packages was very good. The highest inter-examiner agreement for volume measurement was found with InVesalius (Cronbach's alpha = 0.992). On the other hand, there was a statistically significant difference between dry mandible volumetric measurements and Gold Standard. All software showed statistically significantly lower dry mandible volumetric measurements than the gold standard. CONCLUSION: Computer-aided assessment of cystic lesion volume using InVesalius, OnDemand, and MIMICS is a readily available, easy to use, non-invasive option. It confers an advantage over formula-based volume as it gives the exact morphology of the lesion so that potential problems can be detected before surgery. Volume analysis with InVesalius software was accurate in determining the volume of simulated periapical defects in a human cadaver mandible as compared to true volume. InVesalius software proved that open-source software can be robust yet user-friendly with the advantage of minimal cost to use.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Programas Informáticos , Humanos , Reproducibilidad de los Resultados , Estudios Retrospectivos , Mandíbula/diagnóstico por imagenRESUMEN
Effluent water from different industries is considered one of the most serious environmental pollutants due to its non-safe disposal. Therefore, proper treatment methods for such wastewater are strongly stimulated for its potential reuse in industries or agriculture. This study introduces a composite fabricated via doping of polystyrene with nanoparticles of cobalt hydroxide as a novel adsorbent for dye and heavy metal decontamination from wastewater. The adsorbent fabrication involves the preparation of polystyrene via high-internal phase emulation (HIPE) polymerization followed by its intercalation with particles of alkali cobalt. The chemical composition and structural properties of the synthesized composite were confirmed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray spectroscopy (EDX). Moreover, scanning electron microscopy (SEM) and N2 adsorption-desorption surface area analysis were performed to identify the surface and morphological characteristics of the composite. Then, the ability of this structure toward the removal of methylene blue dye (MB) and heavy metal (iron iii) species from waste aqueous solutions was investigated. Successful elimination for both MB and Fe(iii) was achieved by the presented composite. Elevated adsorption capacities of 75.2 and 112.3 mg g-1, toward MB and Fe(iii) respectively, were detected for the presented polymer-metal hydroxide composite. The increased values of the composite are attributed to the presence of both organic and inorganic functional groups within its structure. Kinetic and isotherm studies for the removal of both cationic species revealed that adsorption processes fit the pseudo-second-order kinetic model and Langmuir isotherm model. Additionally, thermodynamics measurements indicated that the adsorption process of methylene blue and Fe ions is feasible, spontaneous, physisorption, and endothermic.
RESUMEN
Background: The prognostic role of the soluble circulating suppression of tumorigenicity 2 marker (sST2) in different cardiovascular diseases (CVD) is still under investigation. This research aimed to assess the serum levels of sST2 in the blood of individuals with ischemic heart disease and its relation to disease severity, also to examine any changes in sST2 levels following a successful percutaneous coronary intervention (PCI) in those patients. Methods: A total of 33 ischemic patients and 30 non-ischemic controls were included. The plasma level of sST2 was measured using commercially available ELISA assay kit, at baseline and 24-48 h after the intervention in the ischemic group. Results: On admission, there was a significant difference between the group of acute/chronic coronary syndrome cases and controls regarding the sST2 plasma level (p < 0.001). There was an insignificant difference between the three ischemic subgroups at the baseline sST2 level (p = 0.38). The plasma sST2 level decreased significantly after PCI (from 20.70 ± 1.71 to 16.51 ± 2.43, p = 0.006). There was a modestly just significant positive correlation between the acute change in post-PCI sST2 level and the severity of ischemia as measured by the Modified Gensini Score (MGS) (r = 0.45, p = 0.05). In spite of the highly significant improvement in the coronary TIMI flow of ischemic group after PCI, there was insignificant negative correlation between the post- PCI delta change in the sST2 level and the post-PCI TIMI coronary flow grade. Conclusion: A significantly high plasma level of sST2 in patients with myocardial ischemia and controlled cardiovascular risk factors showed an immediate reduction after successful revascularization. The high baseline level of the sST2 marker and the acute post-PCI reduction was mainly related to the severity of ischemia rather than left ventricular function.
Asunto(s)
Síndrome Coronario Agudo , Isquemia Miocárdica , Intervención Coronaria Percutánea , Humanos , Proteína 1 Similar al Receptor de Interleucina-1 , Isquemia Miocárdica/diagnóstico , Isquemia Miocárdica/terapia , Procedimientos Quirúrgicos VascularesRESUMEN
The most frequently used and universally accepted technique for removing caries is mechanical ablation of decayed tissues by rotating drills. New minimally invasive strategies, such as the use of lasers to perform highly controlled tissue ablation, have been introduced in dental practice. The aim of this study was to assess and compare treatment with a 2940 nm erbium/yttrium-aluminum-garnet (Er:YAG) laser versus a conventional rotary treatment during cavity preparation in children with regard to restoration integrity. In a randomized, controlled, blinded trial using a split-mouth design, 40 (9-12-year-old) children with 80 carious primary molars were included. The cavity in one quadrant was randomized to be treated conventionally using a bur, while the cavity in the other quadrant was prepared using an Er:YAG laser. At the one-year follow-up, clinical examinations were conducted to assess the integrity of the restorations according to the Ryge criteria. The data were analyzed using SPSS version 22 (IBM Inc., Chicago, IL, USA). The average age of the participants was 9.4 ± 1.29 years. Males accounted for 51.4% of the participants. The Ryge criteria showed clinical success of restorations, and there was no discernible difference between the conventional and laser intervention techniques. Over one year, no statistically significant differences in the clinical integrity based on the Ryge criteria were found following class I cavity preparation in primary teeth with either procedure.
RESUMEN
Purpose: The aim of the study is to describe a case where Femtosecond Intrastromal Lenticule Extraction was used to address the refractive defect following topography-guided phototherapeutic keratectomy (topo-PTK) to regularise a scarred corneal surface after an initial LASIK flap formation attempt failed. Observations: A 23-year-old female experienced a thin and irregular corneal flap, during a microkeratome LASIK surgery of the right eye. Subsequently, she experienced epithelial ingrowth. Three months postoperatively the cornea showed scarring and partial flap melting. Topo-PTK was employed to ablate the scarred surface rendering it regular. Treatment with Femtosecond Intrastromal Lenticule Extraction was performed to correct the final refractive error of Sph -5.50 Cyl -2.00 Axis 180° with a happy end of uncorrected visual acuity (UCVA) of 20/20. Conclusions and Importance: Femtosecond Intrastromal Lenticule Extraction can be used for retreatment after surface ablation. Topo-PTK can be used to ablate post-operative LASIK-induced irregularities with a successful outcome.
RESUMEN
BACKGROUND: This study investigated the effect of using different agents for protecting enamel proximal surfaces against acidic attack after interproximal reduction (IPR) using the trans micro radiography technique. METHODS: Seventy-five sound-proximal surfaces were obtained from extracted premolars for orthodontic reasons. All teeth were measured miso-distally and mounted before being stripped. The proximal surfaces of all teeth were hand stripped with single-sided diamond strips (OrthoTechnology, West Columbia, SC, USA) followed by polishing via Sof-Lex polishing strips (3M, Maplewood, MN, USA). Three-hundred micrometers of enamel thickness was reduced from each proximal surface. The teeth were randomly divided into 5 groups: group 1 (control un-demineralized) received no treatment, group 2 (control demineralized) had their surfaces demineralized after the IPR procedure, group 3 (fluoride) specimens were treated with fluoride gel (NUPRO, DENTSPLY, Charlotte, NC, USA) after the IPR, group 4 (Icon) resin infiltration material (Icon Proximal Mini Kit, DMG, Bielefeld, Germany) was applied after IPR, group 5 (MI varnish) specimens were treated with Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) containing varnish (MI Varnish, G.C, USA, St. Alsip, IL, USA) after the IPR. The specimens in (groups 2-5) were stored in a 4.5 pH demineralization solution for 4 days. The trans-micro-radiography (TMR) technique was conducted to evaluate the mineral loss (∆Z) and lesion depth of all specimens after the acid challenge. The obtained results were analyzed statistically using a one-way ANOVA at a significance level of α = 0.05. RESULTS: The MI varnish recorded significant ∆Z and lesion depth values compared to the other groups p > 0.05. There was no significant difference in ∆Z and lesion depth between the control demineralized, Icon, and fluoride groups p < 0.05. CONCLUSION: The MI varnish increased the enamel resistance to acidic attack, and thus can be considered an agent capable of protecting the proximal enamel surface after IPR.
RESUMEN
The study aimed to evaluate the effect of applying fluoride bioactive glass (FBAG) and Alpha-Glaze® (resin sealer) on the shear bond strength of orthodontic brackets to enamel bonded by Transbond XT, brushing−abrasion durability, and their protective effect against simulated cariogenic acidic attack. Materials include 135 extracted premolars that were divided into three groupsFBAG, Alpha-Glaze, and control. The shear bond strength test was measured using an Instron Universal Testing Machine. The brushing abrasion challenge took place with a tooth-brushing simulator. Transmitted light microscopy examinations were performed after the specimens were demineralized for 4 days. The results show that the shear bond strength values of the three groups did not report any statistically significant differences: FBAG (28.1 ± 5.5 Mpa), Alpha-Glaze (32.5 ± 7.4 Mpa), and control (30.7 ± 6.5 Mpa) p < 0.05. The Adhesive Remenant Index (ARI) study showed chipping of enamel in 6.6% of Alpha-Glaze and control specimens and 40% of specimens had their enamel surface covered with resin. Furthermore, 30% of the FBAG and 100% of the Alpha-Glaze sealer specimens resisted the abrasion test. In conclusion, FBAG can serve as an orthodontic-sealer capable of protecting the enamel surface surrounding orthodontic brackets. However, the Alpha-Glaze sealer did not offer the capability of protecting the enamel.
RESUMEN
OBJECTIVES: This study examined the ability of a borate adhesive to protect enamel/dentin surfaces from acidic erosion and its effect on the shear bond strength (SBS) of enamel/dentin to resin composite. MATERIALS AND METHODS: 180 human enamel/dentin specimens were utilized. Enamel buccal surfaces were etched with phosphoric-acid then divided into: (EBG) borate glass adhesive group; (ERS) resin-adhesive system group; (EF) fluoride gel 1.23% group, and enamel control (EC) group; followed by bonding to orthodontic-buttons. The dentin specimens were conditioned by EDTA (Ethylene-diamine-tetra-acetic acid) and divided into: (DBG) borate glass resin, (DRS) resin adhesive; (DDA) group had a dentin-desensitizing agent VivaSens (VivaDent, Liechtenstein) and (DC) control group. The treated enamel/dentin specimens had their SBS to composite. The enamel/dentin specimens were exposed to 1% citric acid (18 min). Enamel/dentin specimens were examined by (SEM/EDS) scanning-electron-microscope equipped with electron-dispersive-spectroscopy and (FTIR/ATR). Analysis-of-Variance (ANOVA) was used to compare the SBS and Wilcoxon-signed-rank test was used to compare the enamel/dentin areas protected by the applied agents before/after erosion (p = 0.05). RESULTS: There was no significance difference in SBS among all groups except for (DDA) group that showed significant decrease p < 0.05. (EBG) and (DBG) groups were the only groups significantly protected enamel and dentin from erosion p < 0.05. FTIR/ATR showed that erosion altered the chemical structure of (DRS), (DDA), and (DC) groups but did not affect the other enamel/dentin groups. Degree of conversion of the borate-adhesive system was acceptable. CONCLUSION: The Borate adhesive system released calcium and phosphate compounds that decreased the erosive activity of the citric acid resulting in protecting simulated dentin-hypersensitive areas and enamel from erosion without affecting the SBS to resin-composite. CLINICAL SIGNIFICANCE: A Borate adhesive system can be adopted as a therapeutic agent in a fully integrated program for protecting dentin-hypersensitive areas and in enamel next to orthodontic fixed appliances.
Asunto(s)
Grabado Ácido Dental , Recubrimiento Dental Adhesivo , Grabado Ácido Dental/métodos , Boratos/análisis , Boratos/farmacología , Ácido Cítrico/efectos adversos , Recubrimiento Dental Adhesivo/métodos , Cementos Dentales/farmacología , Esmalte Dental , Análisis del Estrés Dental , Dentina , Recubrimientos Dentinarios/química , Humanos , Ensayo de Materiales , Cementos de Resina/química , Resistencia al CorteRESUMEN
BACKGROUND: Cardiothoracic surgeons are facing a big challenge in their surgical practice in the era of the COVID-19 pandemic. The attitude towards performing surgery is influenced by the pandemic. Setting special recommendations for safe cardiothoracic surgery is of extreme importance. METHODS: This was an observational cross-sectional survey that included 77 Egyptian cardiothoracic surgeons. The survey consisted of a self-administered constructed questionnaire with six sections, and was delivered as a Google Forms questionnaire (https://www.google.com/forms/about) that was sent to individuals via social networks and email. RESULTS: More than 80% of Egyptian cardiothoracic surgeons believe they and their patients are at risk. Out of all participants, none had actually been infected with COVID-19 but 26% had encountered a positive COVID-19 person in their surgical team. Although 51% were testing patients before surgery, they reported 9 confirmed cases postoperatively. Computed tomography was the most recommended investigation prior to surgery (by 69%). Most had postponed elective surgeries and only one-third of all surgeons recommended performing elective surgeries cautiously with pretesting for COVID-19 and maximizing protective measures, while more than 40% recommended not performing high-risk elective surgeries. CONCLUSION: We are committed to the safety of our patients, ourselves, our staff, and our families. Planning for the new phase of reopening, whether total reopening or step-by-step reopening, should carefully consider how we should utilize our resources, respect social distancing, and prevent exposure to untested patients or health workers who might turn out to be an undetected positive case.
Asunto(s)
COVID-19 , Cirujanos , Estudios Transversales , Humanos , Pandemias/prevención & control , SARS-CoV-2 , Resultado del TratamientoRESUMEN
STUDY OBJECTIVE: To determine the optimal timing of vaginal dinoprostone administration before office hysteroscopy (OH) in nulliparous women. DESIGN: Randomized, double-blind trial. SETTING: Tertiary referral hospital. PATIENTS: A total of 180 nulliparous women undergoing diagnostic OH. INTERVENTIONS: We randomly allocated the women to long-interval or short-interval dinoprostone groups: three mg dinoprostone was administered vaginally 12 hours before OH in the long-interval group and 3 hours before OH in the short-interval group. MEASUREMENTS AND MAIN RESULTS: The primary outcome was pain during OH measured using a 100-mm visual analog scale (0 = no pain; 100 = worst pain imaginable). The secondary outcomes were ease of hysteroscope passage, patient satisfaction score, and drug-related adverse effects. The patients in the long-interval dinoprostone group had lower pain scores during OH (p <.001). Contrarily, pain scores 30 minutes after the procedure were similar in both groups (p = .1). The patient satisfaction score was higher and clinicians found hysteroscope passage through the cervical canal easier and quicker in the long-interval dinoprostone group than in the short-interval group (p <.001, p = .003, and p <.001, respectively). Side effects were comparable in both study groups. CONCLUSION: Vaginal dinoprostone administered 12 hours before OH was more effective than that administered 3 hours before OH in reducing pain during OH in nulliparous women, with easier hysteroscope insertion, shorter procedure duration, and higher patient satisfaction score.
Asunto(s)
Misoprostol , Oxitócicos , Administración Intravaginal , Dinoprostona , Método Doble Ciego , Femenino , Humanos , Histeroscopía/efectos adversos , Dimensión del Dolor , EmbarazoRESUMEN
BACKGROUND: Sleep is essential for full mental and physical renewal. Cardiac surgery improves the life expectancy and quality. But unfortunately, some patients lacked that merit as they suffered sleep disturbance. We used validated questionnaire applied to 153 cardiac surgery patients to assess the sleep disturbances after surgery. RESULTS: About 70 (45.8%) had valve procedure, 55 (36%) had revascularization, 19 (12.4%) had both procedures and 9 (5.8%) had other procedures. The majority had no post-operative bleeding nor infection. About 78% had sleeping difficulty for one month. About 50% used different medications to fall asleep, mostly analgesics. About 76% slept after 2-6 h irrespective of sleep quality. Some patients had poor sleep quality in the form of nightmares and night terrors. CONCLUSION: Sleep quality was disturbed immediately following cardiac surgery. There was a reduction of night sleep compensated by increased daytime sleepiness. These changes almost reverted one month after surgery.
Asunto(s)
Procedimientos Quirúrgicos Cardíacos , Trastornos del Sueño-Vigilia , Adulto , Procedimientos Quirúrgicos Cardíacos/efectos adversos , Humanos , Sueño , Trastornos del Sueño-Vigilia/diagnóstico , Trastornos del Sueño-Vigilia/etiología , Encuestas y Cuestionarios , Resultado del TratamientoRESUMEN
OBJECTIVES: The aim of this study was to evaluate the protective effect of using four different fluoride bioactive enamel sealers against an acidic erosion challenge. MATERIALS AND METHODS: A sample of 50 freshly extracted sound upper premolars had their buccal surface bonded to 50 orthodontic brackets using Transbond PLUS color change adhesive; the first four groups had four compositions of fluoride bioactive glasses based on 37 mol% SiO2, 43.9-53.9 mol% CaO, 6.1 mol% P2O5 and CaF2, and 0-10 mol% of Na2O applied to their surfaces and the fifth group served as control (which was not treated by any bioactive sealer). All specimens were challenged by 1% citric acid for 18 minutes which was stirred by a magnetic stirrer. The enamel surfaces next to the orthodontic brackets were examined by SEM. The Wilcoxon signed-rank test was used to compare the area covered by the fluoride bioactive pastes before/after erosion (p < 0.05). Samples from the layer formed on top of the examined teeth were tested before/after erosion to be examined by the attenuated total reflectance Fourier-transform infrared spectroscopy (FTIR/ATR). RESULTS: The FTIR/ATR test showed that fluoride bioactive pastes' applications resulted in the formation of a hydroxyapatite-rich layer; the SEM analysis showed that the aforementioned layer significantly resisted erosion challenge when compared to the control group (p < 0.05). CONCLUSIONS: Fluoride bioactive pastes can efficiently protect the enamel surfaces next to orthodontic brackets from acidic erosion challenges.
Asunto(s)
Esmalte Dental/efectos de los fármacos , Fluoruros/farmacología , Vidrio/química , Soportes Ortodóncicos , Sustancias Protectoras/farmacología , Simulación por Computador , Cristalización , Esmalte Dental/ultraestructura , Selladores de Fosas y Fisuras , Resinas Sintéticas/química , Espectroscopía Infrarroja por Transformada de Fourier , TemperaturaRESUMEN
BACKGROUND: Orthodontic patients are at high risk to develop caries. This study is introducing a clinical method detecting interfacial defects between ceramic brackets and enamel utilizing optical coherent tomography in addition to using the nanoleakage expression in vitro test. METHODS: Transbond XT primer and moisture insensitive primer (MIP) were bonded to 75 human premolar enamel surfaces and divided into (XTD), (MIPD), and (MIPW) groups. The (XTD) and (MIPD) groups had ceramic brackets bonded to dry enamel surfaces using TransBond and moisture insensitive primers, respectively, while the (MIPW) samples were bonded to moist enamel using moisture insensitive primer. All specimens were examined under crosspolarization optical coherence tomography. Debonding forces of the brackets to 45 teeth (15 teeth/group). 30 bonded specimens (15 specimens/group) were cross-sectioned to detect the nanoleakage expression using scanning electron microscope equipped with energy-dispersive spectroscopy (SEM/EDS). The degree of conversion of the specimens in the experimental groups was tested using attenuated total reflectance Fourier transform infrared spectroscopy (FTIR/ATR). RESULTS: Optical coherence tomography detected the interfacial defects between the ceramic brackets and tooth structure. One way ANOVA showed that (XTD) and (MIPD) groups recorded significantly higher bond strength values and less nanoleakage expression when compared to MIPW (p > 0.05). CONCLUSIONS: Optical coherence tomography can be utilized to detect interfacial adhesive-tooth defects. Dry enamel surfaces improve the quality of the enamel/primer interface (200 words).
Asunto(s)
Diente Premolar , Esmalte Dental , Soportes Ortodóncicos , Cementos de Resina/química , Humanos , Resistencia al Corte , Espectrometría por Rayos XRESUMEN
OBJECTIVES: 45S5 Bioglass is a bioactive glass capable of releasing ions that can interact with dental hard tissues. The current study aimed at examining the effectiveness of 45S5 Bioglass in remineralizing enamel white spot lesion (WSL) as well as its effect on the bond strength of orthodontic brackets bonded to demineralized enamel. MATERIALS AND METHODS: WSLs were induced in the buccal surfaces of 135 human extracted teeth by storage in acid solution pH 4.5 for four days. The specimens were then equally divided into three groups; Demineralized group, Bioglass group (BG), and control group (intact enamel). The groups were chemically analyzed using (FTIR/ATR) Fourier-transform infrared spectroscopy/attenuated total reflectance, (XRD) X-ray diffraction, and (SEM/EDS) scanning electron microscope equipped with electron-dispersive-spectroscopy. Moreover, 10 specimens from each group were tested using Transverse Micro Radiography (TMR) technique, and 15 specimens from each group were bonded with metal orthodontic brackets and tested for shear bond strength test (SBS). The data were analyzed statistically using One way ANOVA p < 0.05. RESULTS: TMR study showed that bioglass group samples recorded lesion depth of 70.19 ± 29.21 µm and Δ Z (mineral loss) 732.15 ± 210.16 vol% µm which was significantly lower than the demineralized specimens having lesion depth of 115.75 ± 19.98 µm and Δ Z (mineral loss) 3472.69 ± 738.38 vol%µm, moreover, bioglass specimens recorded 14.15 ± 2.35 Mpa which was significantly higher than demineralized specimens 6.82+1.83 Mpa but less than the control specimens 20.5 + 6.1 MPa (p < 0.05). FTIR/ATR, XRD, and SEM/EDS tests showed that bioglass paste formed a layer of brushite crystals onto the treated enamel surface. CONCLUSION: 45S5 bioglass paste may serve as an effective remineralizing agent for demineralized enamel.
Asunto(s)
Caries Dental , Soportes Ortodóncicos , Esmalte Dental , Vidrio , HumanosRESUMEN
PURPOSE: This study was conducted to evaluate the accuracy of cone-beam computed tomography (CBCT) in detecting the posterior superior alveolar (PSA) artery canal in a sample of the Egyptian population. MATERIALS AND METHODS: CBCT images of 600 maxillary sinuses of patients were examined for the presence or absence of the PSA artery along the lateral wall of the maxillary sinus, and for the diameter and type of the canal in relation to age and sex. The distances from the canal to the alveolar crest and sinus floor were also measured. Each canal was assessed to determine whether it was bifid. RESULTS: The PSA artery canal could be detected in 92.0% of the sinuses. The mean distance from the inferior border of the PSA artery canal to the sinus floor was 8.2±2.2 mm (range, 3.2-13.6 mm) in males and 7.3±2.1 mm (range, 3.0-13.1 mm) in females. The mean distance from the inferior border of the PSA artery canal to the alveolar crest was 18.2±2.7 mm (range, 11.0-23.9 mm) in males and 17.4±2.3 mm (range, 10.8-23.5 mm) in females. The mean diameter of the PSA artery canal was larger in male subjects. The PSA artery canal was bifid in 8.7% of cases. The most frequently observed location of the PSA artery canal was intraosseous (82.2%). CONCLUSION: CBCT was confirmed to be a valuable tool for evaluation and localization of the PSA artery before maxillary sinus lift surgery to avoid intraoperative bleeding.
RESUMEN
Regenerative medicine is a field that aims to influence and improvise the processes of tissue repair and restoration and to assist the body to heal and recover. In the field of hard tissue regeneration, bio-inert materials are being predominantly used, and there is a necessity to use bioactive materials that can help in better tissue-implant interactions and facilitate the healing and regeneration process. One such bioactive material that is being focused upon and studied extensively in the past few decades is bioactive glass (BG). The original bioactive glass (45S5) is composed of silicon dioxide, sodium dioxide, calcium oxide, and phosphorus pentoxide and is mainly referred to by its commercial name Bioglass. BG is mainly used for bone tissue regeneration due to its osteoconductivity and osteostimulation properties. The bioactivity of BG, however, is highly dependent on the compositional ratio of certain glass-forming system content. The manipulation of content ratio and the element compositional flexibility of BG-forming network developed other types of bioactive glasses with controllable chemical durability and chemical affinity with bone and bioactivity. This review article mainly discusses the basic information about silica-based bioactive glasses, including their composition, processing, and properties, as well as their medical applications such as in bone regeneration, as bone grafts, and as dental implant coatings.
RESUMEN
OBJECTIVE: To evaluate the efficacy of carbetocin versus placebo in decreasing intraoperative blood loss and the need for blood transfusion during abdominal myomectomy. DESIGN: Randomized, double-blind, placebo-controlled trial. SETTING: Tertiary university hospital from September 2019 to February 2020. PATIENT(S): A total of 138 women with symptomatic leiomyoma who were candidates for abdominal myomectomy (n = 69 in each group). INTERVENTION(S): We randomized the study participants in a 1:1 ratio to carbetocin and placebo groups. Intravenous 100 µg carbetocin or placebo was administered slowly after induction of anesthesia. MAIN OUTCOME MEASURE(S): Intraoperative blood loss, need for blood transfusion, postoperative hemoglobin, operative time, length of hospitalization, and drug side-effects. RESULT(S): The baseline characteristics were similar among all groups. Carbetocin had significantly lower intraoperative blood loss compared with placebo (mean difference 184 mL). Hemoglobin level 24 hours after surgery was significantly lower in the placebo group than in the carbetocin group (9.1 ± 0.8 vs. 10.3 ± 0.6 g/dL). Eight women in the carbetocin group needed blood transfusion compared with 17 in placebo group. Operative time, length of hospitalization, and side-effects were similar in both groups. CONCLUSION(S): A single preoperative intravenous dose of 100 µg carbetocin is a simple, practical, and effective method of decreasing intraoperative blood loss and the need for blood transfusion during abdominal myomectomy, with tolerable, few, nonsignificant side-effects. CLINICAL TRIAL REGISTRATION NUMBER: NCT04083625.