Low-Loss GHz Frequency Phononic Integrated Circuits in Gallium Nitride for Compact Radio Frequency Acoustic Wave Devices.

Guiding and manipulating GHz frequency acoustic waves in [Formula: see text]-scale waveguides and resonators open up new degrees of freedom to manipulate radio frequency (RF) signals in chip-scale platforms. A critical requirement for enabling high-performance devices is the demonstration of low acoustic dissipation in these highly confined geometries. In this work, we show that gallium nitride (GaN) on silicon carbide (SiC) supports low-loss acoustics by demonstrating acoustic microring resonators with frequency-quality factor ( fQ ) products approaching 1013 Hz at 3.4 GHz. The low dissipation measured exceeds the fQ bound set by the simplified isotropic Akhiezer material damping limit of GaN. We use this low-loss acoustics platform to demonstrate spiral delay lines with on-chip RF delays exceeding [Formula: see text], corresponding to an equivalent electromagnetic delay of ≈ 750 m. Given GaN is a well-established semiconductor with high electron mobility, this work opens up the prospect of engineering traveling wave acoustoelectric interactions in [Formula: see text]-scale waveguide geometries, with associated implications for chip-scale RF signal processing.

Robotic Vectorial Field Alignment for Spin-Based Quantum Sensors.

Developing practical quantum technologies will require the exquisite manipulation of fragile systems in a robust and repeatable way. As quantum technologies move toward real world applications, from biological sensing to communication in space, increasing experimental complexity introduces constraints that can be alleviated by the introduction of new technologies. Robotics has shown tremendous progress in realizing increasingly smart, autonomous, and highly dexterous machines. Here, a robotic arm equipped with a magnet is demonstrated to sensitize an NV center quantum magnetometer in challenging conditions unachievable with standard techniques. Vector magnetic fields are generated with 1° angular and 0.1 mT amplitude accuracy and determine the orientation of a single stochastically-aligned spin-based sensor in a constrained physical environment. This work opens up the prospect of integrating robotics across many quantum degrees of freedom in constrained settings, allowing for increased prototyping speed, control, and robustness in quantum technology applications.

Heterogeneous Integration of Solid-State Quantum Systems with a Foundry Photonics Platform.

Diamond color centers are promising optically addressable solid-state spins that can be matter-qubits, mediate deterministic interaction between photons, and act as single photon emitters. Useful quantum computers will comprise millions of logical qubits. To become useful in constructing quantum computers, spin-photon interfaces must, therefore, become scalable and be compatible with mass-manufacturable photonics and electronics. Here, we demonstrate the heterogeneous integration of NV centers in nanodiamond with low-fluorescence silicon nitride photonics from a standard 180 nm CMOS foundry process. Nanodiamonds are positioned over predefined sites in a regular array on a waveguide in a single postprocessing step. Using an array of optical fibers, we excite NV centers selectively from an array of six integrated nanodiamond sites and collect the photoluminescence (PL) in each case into waveguide circuitry on-chip. We verify single photon emission by an on-chip Hanbury Brown and Twiss cross-correlation measurement, which is a key characterization experiment otherwise typically performed routinely with discrete optics. Our work opens up a simple and effective route to simultaneously address large arrays of individual optically active spins at scale, without requiring discrete bulk optical setups. This is enabled by the heterogeneous integration of NV center nanodiamonds with CMOS photonics.

Quantifying and mitigating optical surface loss in suspended GaAs photonic integrated circuits.

Understanding and mitigating optical loss is critical to the development of high-performance photonic integrated circuits (PICs). In particular, in high refractive index contrast compound semiconductor (III-V) PICs, surface absorption and scattering can be a significant loss mechanism, and needs to be suppressed. Here, we quantify the optical propagation loss due to surface state absorption in a suspended GaAs PIC platform, probe its origins using x-ray photoemission spectroscopy and spectroscopic ellipsometry, and show that it can be mitigated by surface passivation using alumina (Al2O3).

Using electrical resistance asymmetries to infer the geometric shapes of foundry patterned nanophotonic structures.

While silicon photonics has leveraged the nanofabrication tools and techniques from the microelectronics industry, it has also inherited the metrological methods from the same. Photonics fabrication is inherently different from microelectronics in its intrinsic sensitivity to 3D shape and geometry, especially in a high-index contrast platform like silicon-on-insulator. In this work, we show that electrical resistance measurements can in principle be used to infer the geometry of such nanophotonic structures and reconstruct the micro-loading curves of foundry etch processes. We implement our ideas to infer 3D geometries from a standard silicon photonics foundry and discuss some of the potential sources of error that need to be calibrated out. By using electrical measurements, pre-designed structures can be rapidly tested at wafer-scale, without the added complexity of optical alignment and spectral measurement and analysis, providing both a route towards predictive optical device performance and a means to control the geometry variation.

Toward compact high-efficiency grating couplers for visible wavelength photonics.

Although grating couplers have become the de-facto standard for optical access to integrated silicon photonics platforms, their performance at visible wavelengths, in moderate index contrast platforms such as silicon nitride, leaves significant room for improvement. In particular, the index contrast governs the diffraction efficiency per grating tooth and the resulting overall coupler length. In this work, we develop two approaches to address this problem: a dielectric grating that sums multiple optical modes to increase the overall output intensity; and an embedded metal grating that enhances the attainable refractive index contrast, and therefore reduces the on-chip footprint. We present experimental results that can be developed to realize compact efficient visible wavelength photonic interconnects, with a view toward cryogenic deployment for quantum photonics, where space is constrained and efficiency is critical.

Smooth Sidewalls on Crystalline Gold through Facet-Selective Anisotropic Reactive Ion Etching: Toward Low-Loss Plasmonic Devices.

Quantum plasmonics aims to harness the deeply subwavelength confinement provided by plasmonic devices to engineer more efficient interfaces to quantum systems in particular single emitters. Realizing this vision is hampered by the roughness-induced scattering and loss inherent in most nanofabricated devices. In this work, we show evidence of a reactive ion etching process to selectively etch gold along select crystalline facets. Since the etch is facet selective, the sidewalls of fabricated devices are smoother than the lithography induced line-edge roughness with the prospect of achieving atomic smoothness by further optimization of the etch chemistry. This opens up a route toward fabricating integrated plasmonic circuits that can achieve loss metrics close to fundamental bounds.

Suspended gallium arsenide platform for building large scale photonic integrated circuits: passive devices.

The spectacular success of silicon-based photonic integrated circuits (PICs) in the past decade naturally begs the question of whether similar fabrication procedures can be applied to other material platforms with more desirable optical properties. In this work, we demonstrate the individual passive components (grating couplers, waveguides, multi-mode interferometers and ring resonators) necessary for building large scale integrated circuits in suspended gallium arsenide (GaAs). Implementing PICs in suspended GaAs is a viable route towards achieving optimal system performance in areas with stringent device constraints like energy efficient transceivers for exascale systems, integrated electro-optic comb lasers, integrated quantum photonics, cryogenic photonics and electromechanical guided wave acousto-optics.

High-frequency, resonant acousto-optic modulators fabricated in a MEMS foundry platform.

We report the design and characterization of high-frequency, resonant acousto-optic modulators (AOMs) in a micro-electro-mechanical systems (MEMS) foundry process. The doubly resonant cavity design, with short (L ∼10.5 µm) acoustic and optical cavity lengths, allows us to measure acousto-optic modulation at GHz frequencies with high modulation efficiency. In contrast to traditional AOMs, these devices rely on the perturbation induced by the displacement of cavity boundaries, which can be significantly enhanced in a suspended geometry. This platform can serve as the building block for fast 2D spatial light modulators, low-cost integrated free-space optical links, and optically enhanced low-noise RF receivers.

Diameter-optimized high-order waveguide nanorods for fluorescence enhancement applied in ultrasensitive bioassays.

Development of fluorescence enhancement (FE) platforms based on ZnO nanorods (NRs) has sparked considerable interest, thanks to their well-demonstrated potential in chemical and biological detection. Among the multiple factors determining the FE performance, high-order waveguide modes are specifically promising in boosting the sensitivity and realizing selective detection. However, quantitative experimental studies on the influence of the NR diameter, substrate, and surrounding medium, on the waveguide-based FE properties remain lacking. In this work, we have designed and fabricated a FE platform based on patterned and well-defined arrays of vertical, hexagonal prism ZnO NRs with six distinct diameters. Both direct experimental evidence and theoretical simulations demonstrate that high-order waveguide modes play a crucial role in FE, and are strongly dependent on the NR diameter, substrate, and surrounding medium. Using the optimized FE platform, a significant limit of detection (LOD) of 10-16 mol L-1 for Rhodamine-6G probe detection is achieved. Especially, a LOD as low as 10-14 g mL-1 is demonstrated for a prototype biomarker of carcinoembryonic antigen, which is improved by one order compared with the best LOD ever reported using fluorescence-based detection. This work provides an efficient path to design waveguiding NRs-based biochips for ultrasensitive and highly-selective biosensing.