RESUMEN
At orbit insertion on 14 November 1971 the Martian surface was largely obscured by a dust haze with an extinction optical depth that ranged from near unity in the south polar region to probably greater than 2 over most of the planet. The only features clearly visible were the south polar cap, one dark, spot in Nix Olympica, and three dark spots in the Tharsis region. During the third week the atmosphere began to clear and surface visibility improved, but contrasts remained a fraction of their normal value. Each of the dark spots that apparently protrude through most of the dust-filled atmosphere has a crater or crater complex in its center. The craters are rimless and have featureless floors that, in the crater complexes, are at different levels. The largest crater within the southernmost spot is approximately 100 kilometers wide. The craters apparently were formed by subsidence and resemble terrestrial calderas. The south polar cap has a regular margin, suggsting very flat topography. Two craters outside the cap have frost on their floors; an apparent crater rim within the cap is frost free, indicating preferentia loss of frost from elevated ground. If this is so then the curvilinear streaks, which were frost covered in 1969 and are now clear of frost, may be low-relief ridges. Closeup pictures of Phobos and Deimos show that Phobos is about 25 +/-5 by 21 +/-1 kilometers and Deimos is about 13.5 +/- 2 by 12.0 +/-0.5 kilometers. Both have irregular shapes and are highly cratered, with some craters showing raised rims. The satellites are dark objects with geometric albedos of 0.05.
RESUMEN
Stereoscopic pictures returned by surface-based imaging systems can be used to reconstruct the topography of landing sites on Mars and other planets. Large surface relief with respect to distance and the large scale variation inherent in surface-based pictures produce problems in stereoscopic measurement very different from those presented by high altitude photography. Optical-mechanical scanning systems, or facsimile cameras, facilitate accurate reconstruction of landing site topography because of the linearity of system photometric response and the accuracy with which image geometry can be measured.
RESUMEN
Surveyor V landed in a small crater, 8.5 meters wide and 12.5 meters long, which was probably formed by drainage of surficial fragmental debris into a subsurface fissure. The lunar surface debris layer is exposed in the walls of this crater. At depths below about 10 centimeters, the debris appears to be composed mainly of shock-compressed aggregates, ranging from a few millimeters up to 3 centimeters in diameter, set in a matrix of less-coherent finer particles. Rocky chips and fragments larger than a millimeter are dispersed as a subordinate constituent of the debris.
