Continuous electrospinning of polymer nanofibers of Nylon-6 using an atomic force microscope tip.

An atomic force microscopy (AFM) probe is successfully utilized as an electrospinning tip for fabricating Nylon-6 nanofibers. The nanometre-size tip enabled controlled deposition of uniform polymeric nanofibers within a 1 cm diameter area. Nylon-6 nanofibers were continuously electrospun at a solution concentration as low as 1 wt% Nylon-6 in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP). Wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) results of the AFM electrospun fibers indicated that the nanofibers predominantly display the meta-stable γ crystalline form suggesting rapid crystallization rate during the process. In addition to precise control over fiber deposition and diameter, some of the drawbacks of conventional electrospinning such as large volume of solutions and clogging of needles can be overcome using this AFM based electrospinning technique. Lastly, a comparison of electrospun fibers from syringe-needle based electrospinning and AFM probe-tip based electrospinning indicated significant morphological and microstructural differences in the case of AFM based electrospinning.

Characterization of silane-modified immobilized gold colloids as a substrate for surface-enhanced Raman spectroscopy.

Immobilized gold colloid particles coated with a C-18 alkylsilane layer have been characterized as a substrate for surface-enhanced Raman scattering (SERS) studies of adsorption onto hydrophobic surfaces. Atomic force microscopy images, optical extinction spectra, and SERS measurements are reported as a function of accumulation of gold colloid on glass. As the metal particles become increasingly aggregated on the surface, the SERS enhancement increases until the plasmon resonance shifts to wavelengths longer than the excitation laser. The gold colloid substrates are stable and exhibit reproducible SERS enhancement. When octadecyltrimethoxysilane is self-assembled over the gold, the metal surface is protected from exposure to solution-phase species, as evidenced by the inhibition of chemisorption of a disulfide reagent to the overcoated gold surface. The results show that interactions with gold can be blocked by a silane layer so as not to significantly influence physisorption of molecules at the C-18/solution interface. The SERS enhancement from these C-18-overcoated gold substrates is reproducible for different films prepared from the same colloidal suspension; the substrates are also stable with time and upon exposure to laser irradiation.

Surface chemical characterization of 2.5-microm particulates (PM2.5) from air pollution in Salt Lake City using TOF-SIMS, XPS, and FTIR.

Particulate matter with a diameter of 2.5 microm collected in Salt Lake City (SLC PM2.5) was studied using TOF-SIMS (time-of-flight secondary-ion mass spectrometry), XPS (X-ray photoelectron spectroscopy), and FTIR (Fourier transform infrared spectroscopy). The high spatial resolution and high surface sensitivity of TOF-SIMS allow the surfaces of individual particulates to be analyzed. The high mass-resolution of TOF-SIMS provides good separation of signals from different chemical species at the same nominal mass, and the extremely high detection sensitivity of TOF-SIMS makes the detection of trace elements possible. Metallic elements such as Li, Na, Mg, Al, K, Ca, Cr, Mn, Fe, Cu, Zn, Cs, and Bi were detected by TOF-SIMS on the surface of SLC PM25. The uranium ion U+ together with its oxide ions UO+ and UO2+ were also found. Inorganic compounds detected include oxides, hydroxides, nitrates, sulfates, silicates, borates, chlorides, etc. Organic compounds detected include hydrocarbons, alcohols, aldehydes, ethers, carboxylic acids, amines, amides, nitriles, etc. A number of polycyclic aromatic hydrocarbons (PAH) and nitrated polycyclic aromatic hydrocarbons were detected by TOF-SIMS. High-resolution XPS Cls spectrum shows functional groups such as C-O, CO2, C-CO2, C-C, and C-H and aromatic pi-pi* shake-up transitions. High-resolution XPS O 1s spectrum indicates the coexistence of different oxygen compounds on the surface of PM2.5. FTIR results confirm the presence of various organic compounds in SLC PM2.5 detected by TOF-SIMS and XPS.

"Molecule corrals" for studies of monolayer organic films.

Scanning tunneling microscopy (STM) studies have demonstrated that monolayer-deep, flat-bottomed, circular etch pits can be grown on highly ordered pyrolytic graphite by high-temperature etching in the presence of oxygen. In this work, these graphite etch pits are used as "molecule corrals" to isolate ensembles of molecules for study by STM. The nucleation of self-assembled molecular films in the corrals took place by nucleation events separate from those leading to self-assembly on the surrounding terrace and allowed the measurement of the nucleation rate constant in the corrals. The dependence of the nucleation rate for self-assembly on pit size shows that nucleation occurs at open terrace sites and that step edges (that is, the corral's perimeter) and confinement inhibit film growth.

Electron spectroscopy and atomic force microscopy studies of DNA adsorption on mica.

Various methods for the deposition of deoxyribonucleic acid (DNA) molecules on mica are investigated to determine their reproducibility, and to quantify their ability to bind DNA. The use of these deposition methods for sample preparation for biological scanning tunneling microscopy (STM) and atomic force microscopy (AFM) studies is discussed. Auger electron spectroscopy (AES) and electron spectroscopy for chemical analysis (ESCA) were used to investigate the quantity of DNA adsorbed. AFM images of DNA deposited using the methods investigated are presented. The combination of AFM results with AES and ESCA results provides a basic understanding of the deposition techniques studied and illustrates that electron spectroscopy can be a useful addition to studies of this nature.

Graphite: a mimic for DNA and other biomolecules in scanning tunneling microscope studies.

Highly ordered pyrolytic graphite (HOPG) is the substrate often used in scanning tunneling microscope (STM) studies of biomolecules such as DNA. All of the images presented in this article are of freshly cleaved HOPG surfaces upon which no deposition has occurred. These images illustrate features previously thought to be due to biological molecules, such as periodicity and meandering of "molecules" over steps. These features can no longer be used to distinguish real molecules from features of the native substrate. The feasibility of the continued use of HOPG as a substrate for biological STM studies is discussed.

Direct observation of native DNA structures with the scanning tunneling microscope.

Uncoated double-stranded DNA dissolved in a salt solution was deposited on graphite and imaged in air with the scanning tunneling microscope (STM). The resolution was such that the major and minor grooves could be distinguished. The pitch of the helix varied between 27 and 63 angstroms in the images obtained. Thus the STM can be useful for structural studies of a variety of uncoated and isolated biomolecules.