Compressed sensing reconstruction improves sensitivity of variable density spiral fMRI.

PURPOSE: Functional MRI (fMRI) techniques that can provide excellent blood oxygen level dependent contrast, rapid whole brain imaging, and minimal spatial distortion are in demand. This study explored whether fMRI sensitivity can be improved through the use of compressed sensing (CS) reconstruction of variable density spiral fMRI. METHODS: Three different CS-reconstructed 1-shot variable density spirals were explored (corresponding to 28%, 35%, and 46% under-sampling), and compared with conventional 1-shot and 2-shot Archimedean spirals acquired using matched echo time and volume repetition time. fMRI maps were reconstructed with or without CS MRI and sensitivity was compared using identically matched voxels. RESULTS: The results demonstrated that an l1 -norm based CS reconstruction only led to an increase in functional contrast when applied to 28% under-sampled data. A whole brain t-contrast map revealed that 2-shot uniformly sampled spiral and 28% under-sampled spiral data reconstructed with CS yield equivalent sensitivity, even with matched echo time and volume repetition time CONCLUSION: VD spiral exhibits a useful operating range, in the region of 25-30% under-sampling, for which CS reconstruction can be used to increase the sensitivity of fMRI to brain activity. Using CS, VD acquisitions achieve the same sensitivity as 2-shot Archimedean acquisitions, but require only a single shot.

Degradation and drug release in calcium polyphosphate bioceramics: an MRI-based characterization.

Degradable, bioceramic bone implants made of calcium polyphosphate (CPP) hold potential for controlled release of therapeutic agents in the treatment of localized bone disease. Magnetic resonance imaging techniques for non-invasively mapping fluid distribution, T(1) and T(2) relaxation times and the apparent diffusion coefficient were performed in conjunction with a drug elution protocol to resolve free and bound water components within the material microstructure in two CPP formulations (G1 and G2). The T(2) maps provided the most accurate estimates of free and bound water, and showed that G1 disks contained a detectable free water component at all times, with drug release dominated by a Fickian diffusion mechanism. Drug release from G2 disks was characterized by a combined diffusional/structural relaxation mechanism, which may be related to the gradual infiltration of a free water component associated with swelling and/or chemical degradation.

Imaging of heterogeneous materials with a turbo spin echo single-point imaging technique.

A magnetic resonance imaging method is presented for imaging of heterogeneous broad linewidth materials. This method allows for distortionless relaxation weighted imaging by obtaining multiple phase encoded k-space data points with each RF excitation pulse train. The use of this method, turbo spin echo single-point imaging-(turboSPI), leads to decreased imaging times compared to traditional constant-time imaging techniques, as well as the ability to introduce spin-spin relaxation contrast through the use of longer effective echo times. Imaging times in turboSPI are further decreased through the use of low flip angle steady-state excitation. Two-dimensional images of paramagnetic doped agarose phantoms were obtained, demonstrating the contrast and resolution characteristics of the sequence, and a method for both amplitude and phase deconvolution was demonstrated for use in high-resolution turboSPI imaging. Three-dimensional images of a partially water-saturated porous volcanic aggregate (T(2L) approximately 200 ms, Deltanu(1/2) approximately 2500 Hz) contained in a hardened white Portland cement matrix (T(2L) approximately 0.5 ms, Deltanu(1/2) approximately 2500 Hz) and a water-saturated quartz sand (T(2) approximately 300 ms, T(2)(*) approximately 800 microseconds) are shown.

Relaxation time mapping of short T*2 nuclei with single-point imaging (SPI) methods.

New techniques for quantitative mapping of T1, T2, and T*2 are proposed, based on the single-point imaging (SPI) method, for materials with short nuclear magnetic resonance relaxation times which cannot be imaged with traditional methods. Relaxation times extracted from two-dimensional images of uniform doped agarose phantoms (T*2 approximately 60-210 microseconds) as well as hardened mortar (T*2 approximately 220 microseconds) and polymers (T*2 approximately 20-100 microseconds), using these techniques, agreed with bulk measurements. The method was then applied to a partially dried cylindrical concrete sample (T*2 approximately 115 microseconds).

Concrete/mortar water phase transition studied by single-point MRI methods.

A series of magnetic resonance imaging (MRI) water density and T2* profiles in hardened concrete and mortar samples has been obtained during freezing conditions (-50 degrees C < T < 11 degrees C). The single-point ramped imaging with T1 enhancement (SPRITE) sequence is optimal for this study given the characteristic short relaxation times of water in this porous media (T2* < 200 microseconds and T1 < 3.6 ms). The frozen and evaporable water distribution was quantified through a position based study of the profile magnitude. Submillimetric resolution of proton-density and T2*-relaxation parameters as a function of temperature has been achieved.

The influence of shrinkage-cracking on the drying behaviour of White Portland cement using Single-Point Imaging (SPI).

The removal of water from pores in hardened cement paste smaller than 50 nm results in cracking of the cement matrix due to the tensile stresses induced by drying shrinkage. Cracks in the matrix fundamentally alter the permeability of the material, and therefore directly affect the drying behaviour. Using Single-Point Imaging (SPI), we obtain one-dimensional moisture profiles of hydrated White Portland cement cylinders as a function of drying time. The drying behaviour of White Portland cement, is distinctly different from the drying behaviour of related concrete materials containing aggregates.

Concrete thawing studied by single-point ramped imaging.

A series of two-dimensional images of proton distribution in a hardened concrete sample has been obtained during the thawing process (from -50 degrees C up to 11 degrees C). The SPRITE sequence is optimal for this study given the characteristic short relaxation times of water in this porous media (T2* < 200 micros and T1 < 3.6 ms). The relaxation parameters of the sample were determined in order to optimize the time efficiency of the sequence, permitting a 4-scan 64 x 64 acquisition in under 3 min. The image acquisition is fast on the time scale of the temperature evolution of the specimen. The frozen water distribution is quantified through a position based study of the image contrast. A multiple point acquisition method is presented and the signal sensitivity improvement is discussed.