On the critical competition between singlet exciton decay and free charge generation in non-fullerene based organic solar cells with low energetic offsets.

Reducing voltage losses while maintaining high photocurrents is the holy grail of current research on non-fullerene acceptor (NFA) based organic solar cell. Recent focus lies in understanding the various fundamental mechanisms in organic blends with minimal energy offsets - particularly the relationship between ionization energy offset (ΔIE) and free charge generation. Here, we quantitatively probe this relationship in multiple NFA-based blends by mixing Y-series NFAs with PM6 of different molecular weights, covering a broad power conversion efficiency (PCE) range: from 15% down to 1%. Spectroelectrochemistry reveals that a ΔIE of more than 0.3 eV is necessary for efficient photocurrent generation. Bias-dependent time-delayed collection experiments reveal a very pronounced field-dependence of free charge generation for small ΔIE blends, which is mirrored by a strong and simultaneous field-dependence of the quantified photoluminescence from the NFA local singlet exciton (LE). We find that the decay of singlet excitons is the primary competition to free charge generation in low-offset NFA-based organic solar cells, with neither noticeable losses from charge-transfer (CT) decay nor evidence for LE-CT hybridization. In agreement with this conclusion, transient absorption spectroscopy consistently reveals that a smaller ΔIE slows the NFA exciton dissociation into free charges, albeit restorable by an electric field. Our experimental data align with Marcus theory calculations, supported by density functional theory simulations, for zero-field free charge generation and exciton decay efficiencies. We conclude that efficient photocurrent generation generally requires that the CT state is located below the LE, but that this restriction is lifted in systems with a small reorganization energy for charge transfer.

Advanced Light Management for Encapsulated Silicon Solar Cells: An Antireflective Textured Film with a Down-Shifting Lead-free Perovskite Cs2AgxNa1-xBiyIn1-yCl6 Phosphor.

Light management (LM) is the key to the encapsulation of high-performance silicon (Si) photovoltaic devices (PVs). In this work, simulation analyses provide meaningful insights into optical losses and guide the improvement of the PV performance of the encapsulated silicon solar cells (Encap-Si SCs). An antireflective layer, textured polydimethylsiloxane (PDMS), is designed to reduce reflection losses, especially at a lower illumination intensity, thereby achieving an improvement of 10.89% in the short-current density (JSC) and hence 12.67% in the power conversion efficiency (PCE) when illuminated at an incident angle of 60°. Subsequently, a luminescence down-shifting material, lead-free Cs2AgxNa1-xBiyIn1-yCl6 (CANBIC) double perovskite phosphor, is incorporated into the PDMS film to further enhance the energy yield in the ultraviolet (UV) region. The textured PDMS film with an optimized CANBIC content ultimately achieves a significant improvement in PCE from 21.770 to 23.136%. This enhancement is attributed to the increase in JSC by 2.381 mA/cm2 due to the reduced reflection losses (by antireflective PDMS) and down-converted UV energy (by CANBIC), providing a remarkable advance in LM toward highly efficient encapsulated PVs.

Photodegradation of Organic Solar Cells under Visible Light and the Crucial Influence of Its Spectral Composition.

While wavelength-dependent photodegradation of organic solar cells (OSCs) under visible light is typically discussed in terms of UV/blue light-activated phenomena, we recently demonstrated wavelength-dependent degradation rates up to 660 nm for PM6:Y6. In this study, we systematically investigated this phenomenon for a broad variety of devices based on different donor:acceptor combinations. We found that the spectral composition of the light used for degradation, tuned in a spectral range from 457 to 740 nm and under high irradiances of up to 30 suns, has a crucial influence on the device stability of almost all tested semiconductors. The relevance of this phenomenon was investigated in the context of simulated AM1.5 illumination with metal halide lamps and white LEDs. It is concluded that the current stability testing protocols in OSC research have to be adjusted to account for this effect to reveal the underlying physics of this still poorly understood mechanism.

Precursor-Engineered Volatile Inks Enable Reliable Blade-Coating of Cesium-Formamidinium Perovskites Toward Fully Printed Solar Modules.

Reliable fabrication of large-area perovskite films with antisolvent-free printing techniques requires high-volatility solvents, such as 2-methoxyethanol (2ME), to formulate precursor inks. However, the fabrication of high-quality cesium-formamidinium (Cs-FA) perovskites has been hampered using volatile solvents due to their poor coordination with the perovskite precursors. Here, this issue is resolved by re-formulating a 2ME-based Cs0.05FA0.95PbI3 ink using pre-synthesized single crystals as the precursor instead of the conventional mixture of raw powders. The key to obtaining high-quality Cs-FA films lies in the removal of colloidal particles from the ink and hence the suppression of colloid-induced heterogeneous nucleation, which kinetically facilitates the growth of as-formed crystals toward larger grains and improved film crystallinity. Employing the precursor-engineered volatile ink in the vacuum-free, fully printing processing of solar cells (with carbon electrode), a power conversion efficiency (PCE) of 19.3%, a T80 (80% of initial PCE) of 1000 h in ISOS-L-2I (85 °C/1 Sun) aging test and a substantially reduced bill of materials are obtained. The reliable coating methodology ultimately enables the fabrication of carbon-electrode mini solar modules with a stabilized PCE of 16.2% (average 15.6%) representing the record value among the fully printed counterparts and a key milestone toward meeting the objectives for a scalable photovoltaic technology.

Toward Self-Driven Autonomous Material and Device Acceleration Platforms (AMADAP) for Emerging Photovoltaics Technologies.

ConspectusIn the ever-increasing renewable-energy demand scenario, developing new photovoltaic technologies is important, even in the presence of established terawatt-scale silicon technology. Emerging photovoltaic technologies play a crucial role in diversifying material flows while expanding the photovoltaic product portfolio, thus enhancing security and competitiveness within the solar industry. They also serve as a valuable backup for silicon photovoltaic, providing resilience to the overall energy infrastructure. However, the development of functional solar materials poses intricate multiobjective optimization challenges in a large multidimensional composition and parameter space, in some cases with millions of potential candidates to be explored. Solving it necessitates reproducible, user-independent laboratory work and intelligent preselection of innovative experimental methods.Materials acceleration platforms (MAPs) seamlessly integrate robotic materials synthesis and characterization with AI-driven data analysis and experimental design, positioning them as enabling technologies for the discovery and exploration of new materials. They are proposed to revolutionize materials development away from the Edisonian trial-and-error approaches to ultrashort cycles of experiments with exceptional precision, generating a reliable and highly qualitative data situation that allows training machine learning algorithms with predictive power. MAPs are designed to assist the researcher in multidimensional aspects of materials discovery, such as material synthesis, precursor preparation, sample processing and characterization, and data analysis, and are drawing escalating attention in the field of energy materials. Device acceleration platforms (DAPs), however, are designed to optimize functional films and layer stacks. Unlike MAPs, which focus on material discovery, a central aspect of DAPs is the identification and refinement of ideal processing conditions for a predetermined set of materials. Such platforms prove especially invaluable when dealing with "disordered semiconductors," which depend heavily on the processing parameters that ultimately define the functional properties and functionality of thin film layers. By facilitating the fine-tuning of processing conditions, DAPs contribute significantly to the advancement and optimization of disordered semiconductor devices, such as emerging photovoltaics.In this Account, we review the recent advancements made by our group in automated and autonomous laboratories for advanced material discovery and device optimization with a strong focus on emerging photovoltaics, such as solution-processing perovskite solar cells and organic photovoltaics. We first introduce two MAPs and two DAPs developed in-house: a microwave-assisted high-throughput synthesis platform for the discovery of organic interface materials, a multipurpose robot-based pipetting platform for the synthesis of new semiconductors and the characterization of thin film semiconductor composites, the SPINBOT system, which is a spin-coating DAP with the potential to optimize complex device architectures, and finally, AMANDA, a fully integrated and autonomously operating DAP. Notably, we underscore the utilization of a robot-based high-throughput experimentation technique to address the common optimization challenges encountered in extensive multidimensional composition and parameter spaces pertaining to organic and perovskite photovoltaics materials. Finally, we briefly propose a holistic concept and technology, a self-driven autonomous material and device acceleration platform (AMADAP) laboratory, for autonomous functional solar materials discovery and development. We hope to discover how AMADAP can be further strengthened and universalized with advancing development of hardware and software infrastructures in the future.

Enhanced Photostability of Lead Halide Perovskite Nanocrystals with Mn3+ Incorporation.

Recently, lead halide perovskite nanocrystals (NCs) have shown great potential and have been widely studied in lighting and optoelectronic fields. However, the long-term stability of perovskite NCs under irradiation is an important challenge for their application in practice. Mn2+ dopants are mostly proposed as substitutes for the Pb site in perovskite NCs synthesized through the hot-injection method, with the aim of improving both photo- and thermal stability. In this work, we employed a facile ligand-assisted reprecipitate strategy to introduce Mn ions into perovskite lattice, and the results showed that Mn3+ instead of Mn2+, even with a very low level of incorporation of 0.18 mol % as interstitial dopant, can enhance the photostability of perovskite binder film under the ambient conditions without emission change, and the photoluminescent efficiency can retain 70% and be stable under intensive irradiation for 12 h. Besides, Mn3+ incorporation could prolong the photoluminescent decay time by passivating trap defects and modifying the distortion of the lattice, which underscores the significant potential for application as light emitters.

Polymer-acid-metal quasi-ohmic contact for stable perovskite solar cells beyond a 20,000-hour extrapolated lifetime.

The development of a robust quasi-ohmic contact with minimal resistance, good stability and cost-effectiveness is crucial for perovskite solar cells. We introduce a generic approach featuring a Lewis-acid layer sandwiched between dopant-free semicrystalline polymer and metal electrode in perovskite solar cells, resulting in an ideal quasi-ohmic contact even at elevated temperature up to 85 °C. The solubility of Lewis acid in alcohol facilitates nondestructive solution processing on top of polymer, which boosts hole injection from polymer into metal by two orders of magnitude. By integrating the polymer-acid-metal structure into solar cells, devices exhibit remarkable resilience, retaining 96% ± 3%, 96% ± 2% and 75% ± 7% of their initial efficiencies after continuous operation in nitrogen at 35 °C for 2212 h, 55 °C for 1650 h and 85 °C for 937 h, respectively. Leveraging the Arrhenius relation, we project an impressive T80 lifetime of 26,126 h at 30 °C.

Exploring Highly Efficient Broadband Self-Trapped-Exciton Luminophors: from 0D to 3D Materials.

The review summarizes our recent reports on brightly-emitting materials with varied dimensionality (3D, 2D, 0D) synthesized using "green" chemistry and exhibiting highly efficient photoluminescence (PL) originating from self-trapped exciton (STE) states. The discussion starts with 0D emitters, in particular, ternary indium-based colloidal quantum dots, continues with 2D materials, focusing on single-layer polyheptazine carbon nitride, and further evolves to 3D luminophores, the latter exemplified by lead-free double halide perovskites. The review shows the broadband STE PL to be an inherent feature of many materials produced in mild conditions by "green" chemistry, outlining PL features general for these STE emitters and differences in their photophysical properties. The review is concluded with an outlook on the challenges in the field of STE PL emission and the most promising venues for future research.

Maximizing Performance and Stability of Organic Solar Cells at Low Driving Force for Charge Separation.

Thanks to the development of novel electron acceptor materials, the power conversion efficiencies (PCE) of organic photovoltaic (OPV) devices are now approaching 20%. Further improvement of PCE is complicated by the need for a driving force to split strongly bound excitons into free charges, causing voltage losses. This review discusses recent approaches to finding efficient OPV systems with minimal driving force, combining near unity quantum efficiency (maximum short circuit currents) with optimal energy efficiency (maximum open circuit voltages). The authors discuss apparently contradicting results on the amount of exciton binding in recent literature, and approaches to harmonize the findings. A comprehensive view is then presented on motifs providing a driving force for charge separation, namely hybridization at the donor:acceptor interface and polarization effects in the bulk, of which quadrupole moments (electrostatics) play a leading role. Apart from controlling the energies of the involved states, these motifs also control the dynamics of recombination processes, which are essential to avoid voltage and fill factor losses. Importantly, all motifs are shown to depend on both molecular structure and process conditions. The resulting high dimensional search space advocates for high throughput (HT) workflows. The final part of the review presents recent HT studies finding consolidated structure-property relationships in OPV films and devices from various deposition methods, from research to industrial upscaling.

Quasi-2D Lead-Tin Perovskite Memory Devices Fabricated by Blade Coating.

Two terminal passive devices are regarded as one of the promising candidates to solve the processor-memory bottleneck in the Von Neumann computing architectures. Many different materials are used to fabricate memory devices, which have the potential to act as synapses in future neuromorphic electronics. Metal halide perovskites are attractive for memory devices as they display high density of defects with a low migration barrier. However, to become promising for a future neuromorphic technology, attention should be paid on non-toxic materials and scalable deposition processes. Herein, it is reported for the first time the successful fabrication of resistive memory devices using quasi-2D tin-lead perovskite of composition (BA)2 MA4 (Pb0.5 Sn0.5 )5 I16 by blade coating. The devices show typical memory characteristics with excellent endurance (2000 cycles), retention (105  s), and storage stability (3 months). Importantly, the memory devices successfully emulate synaptic behaviors such as spike-timing-dependent plasticity, paired-pulse facilitation, short-term potentiation, and long-term potentiation. A mix of slow (ionic) transport and fast (electronic) transport (charge trapping and de-trapping) is proven to be responsible for the observed resistive switching behavior.

Volatile Perovskite Precursor Ink Enables Window Printing of Phase-Pure FAPbI3 Perovskite Solar Cells and Modules in Ambient Atmosphere.

Despite the great success of perovskite photovoltaics in terms of device efficiency and stability using laboratory-scale spin-coating methods, the demand for high-throughput and cost-effective solutions remains unresolved and rarely reported because of the complicated nature of perovskite crystallization. In this work, we propose a stable precursor ink design strategy to control the solvent volatilization and perovskite crystallization to enable the wide speed window printing (0.3 to 18.0 m/min) of phase-pure FAPbI3 perovskite solar cells (pero-SCs) in ambient atmosphere. The FAPbI3 perovskite precursor ink uses volatile acetonitrile (ACN) as the main solvent with DMF and DMSO as coordination additives is beneficial to improve the ink stability, inhibit the coffee rings, and the complicated intermediate FAPbI3 phases, delivering high-quality pin-hole free and phase-pure FAPbI3 perovskite films with large-scale uniformity. Ultimately, small-area FAPbI3 pero-SCs (0.062 cm2 ) and large-area modules (15.64 cm2 ) achieved remarkable efficiencies of 24.32 % and 21.90 %, respectively, whereas the PCE of the devices can be maintained at 23.76 % when the printing speed increases to 18.0 m/min. Specifically, the unencapsulated device exhibits superior operational stability with T90 >1350 h. This work represents a step towards the scalable, cost-effective manufacturing of perovskite photovoltaics with both high performance and high throughput.

Bypassing the Single Junction Limit with Advanced Photovoltaic Architectures.

Multijunction devices and photon up- and down-conversion are prominent concepts aimed at increasing photovoltaic efficiencies beyond the single junction limit. Integrating these concepts into advanced architectures may address long-standing issues such as processing complexity, microstructure control, and resilience against spectral changes of the incoming radiation. However, so far, no models have been established to predict the performance of such integrated architectures. Here, a simulation environment based on Bayesian optimization is presented, that can predict and virtually optimize the electrical performance of multi-junction architectures, both vertical and lateral, in combination with up- and down-conversion materials. Microstructure effects on performance are explicitly considered using machine-learned predictive models from high throughput experimentation on simpler architectures. Two architectures that would surpass the single junction limit of photovoltaic energy conversion at reasonable complexity are identified: a vertical "staggered half octave system," where selective absorption allows the use of 6 different bandgaps, and the lateral "overlapping rainbow system" where selective irradiation allows the use of a narrowband energy acceptor with reduced voltage losses, according to the energy gap law. Both architectures would be highly resilient against spectral changes, in contrast with two terminal multi-junction architectures which are limited by Kirchhoff's law.

AgIn5S8/ZnS Quantum Dots for Luminescent Down-Shifting and Antireflective Layer in Enhancing Photovoltaic Performance.

Colloidal AgIn5S8/ZnS quantum dots (QDs) have recently emerged as a promising, efficient, nontoxic, down-shifting material in optoelectronic devices. These QDs exhibit a high photoluminescent quantum yield and offer a range of potential applications, specifically in the field of photovoltaics (PVs) for light management. In this work, we report an eco-friendly method to synthesize AgIn5S8/ZnS QDs and deposit them on commercial silicon solar cells (with an active area of 7.5 cm2), with which the short-circuit current (JSC) enhanced by 1.44% and hence the power conversion efficiency by 2.51%. The enhancements in PV performance are mainly attributable to the improved external quantum efficiency in the ultraviolet region and reduced surface reflectance in the ultraviolet and near-infrared regions. We study the effect of QD concentration on the bifunctions of downshifting and antireflection. The optimal 15 mg/mL QDs blade-coated onto the Si solar cells realize maximum current generation as the reflectance loss in the visible wavelength is compensated by the minimized reflection in the near-infrared region.

Integrated System Built for Small-Molecule Semiconductors via High-Throughput Approaches.

High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of the molecular structure leads to the complexity of molecular properties, such as solubility, polarity, and crystallinity, which poses great challenges to solution processing and purification. Here, we first report an integrated system for the high-throughput synthesis, purification, and characterization of molecules with a large variety. Based on the principle "Like dissolves like," we combine theoretical calculations and a robotic platform to accelerate the purification of those molecules. With this platform, a material library containing 125 molecules and their optical-electronic properties was built within a timeframe of weeks. More importantly, the high repeatability of recrystallization we design is a reliable approach to further upgrading and industrial production.

Power-Law Density of States in Organic Solar Cells Revealed by the Open-Circuit Voltage Dependence of the Ideality Factor.

The density of states (DOS) is fundamentally important for understanding physical processes in organic disordered semiconductors, yet hard to determine experimentally. We evaluated the DOS by considering recombination via tail states and using the temperature and open-circuit voltage (V_{oc}) dependence of the ideality factor. By performing Suns-V_{oc} measurements, we find that the energetic disorder increases deeper into the band gap, which is not expected for a Gaussian or exponential DOS. The linear dependence of the disorder on energy reveals the power-law DOS in organic solar cells.

All Printed Photoanode/Photovoltaic Mini-Module for Water Splitting.

Printing a large-area bismuth vanadate photoanode offers a promising approach for cost-effective photoelectrochemical (PEC) water splitting. However, the light absorption trade-off with charge transfer, as well as stability issues always lead to poor PEC efficiency. Here, the solution-processed recipe is advanced with BiI3 dopant for the printed deposition with controllable crystal growth. The resultant BiVO4 films prefer (001) orientation with nanorod feature on substrate, allowing a faster charge transfer and improved photocurrent. The BiVO4 photoanode in tandem with perovskite solar module delivers an operating photocurrent density of 5.88 mA cm-2 at zero bias in 3.11 cm2 active area under AM 1.5 G illumination, yielding a solar-to-hydrogen efficiency as high as 7.02% for unbiased water splitting. Equally important, the stability of the aged BiVO4 rods has been addressed to distinguish phase segregation at surface. The photocatalysis degradation composes of vanadium loss and Bi2 O3 enriching at the surface, opening a lid on the long-term stability of BiVO4 photoanodes.

Sustainability considerations for organic electronic products.

The development of organic electronic applications has reached a critical point. While markets, including the Internet of Things, transparent solar and flexible displays, gain momentum, organic light-emitting diode displays lead the way, with a current market size of over $25 billion, helping to create the infrastructure and ecosystem for other applications to follow. It is imperative to design built-in sustainability into the materials selection, processing and device architectures of all of these emerging applications, and to close the loop for a circular approach. In this Perspective, we evaluate the status of embedded carbon in organic electronics, as well as options for more sustainable materials and manufacturing, including engineered recycling solutions that can be applied within the product architecture and at the end of life. This emerging industry has a responsibility to ensure a 'cradle-to-cradle' approach. We highlight that ease of dismantling and recycling needs to closely relate to the product lifetime, and that regeneration should be facilitated in product design. Materials choices should consider the environmental effects of synthesis, processing and end-product recycling as well as performance.

Unraveling the Role of Non-Fullerene Acceptor with High Dielectric Constant in Organic Solar Cells.

Increasing the relative dielectric constant is a constant pursuit of organic semiconductors, but it often leads to multiple changes in device characteristics, hindering the establishment of a reliable relationship between dielectric constant and photovoltaic performance. Herein, a new non-fullerene acceptor named BTP-OE is reported by replacing the branched alkyl chains on Y6-BO with branched oligoethylene oxide chains. This replacement successfully increases the relative dielectric constant from 3.28 to 4.62. To surprise, BTP-OE offers consistently lower device performance relative to Y6-BO in organic solar cells (16.27% vs 17.44%) due to the losses in open-circuit voltage and fill factor. Further investigations unravel that BTP-OE has resulted in reduced electron mobility, increased trap density, enhanced first order recombination, and enlarged energetic disorder. These results demonstrate the complex relationship between dielectric constant and device performance, which provide valuable implications for the development of organic semiconductors with high dielectric constant for photovoltaic application.