Acousto-optic-based time domain electric field sensor for magnetic resonance imaging applications.

An acousto-optic (AO)-based electric field sensor is presented for time domain measurement under magnetic resonance imaging (MRI). A fully MR-compatible sensor is designed and fabricated using a phase-shifted fiber Bragg grating mechanically coupled to a piezoelectric transducer. Mechanical resonance of the piezoelectric transducer is matched to the operating frequencies of commonly used MRI systems to increase the sensitivity of the sensor. Sensitivity of the sensor is measured as 1.27 mV/V/m, with a minimum detectable electric field of 4.4 mV/m/√/Hz. Directivity of the sensor is measured with a 18 dB orthogonal component rejection. The dynamic range of the sensor is calculated as 117 dB/Hz, which allows the measurement of electric fields up to 3.2 kV/m. In MRI studies, the AO sensor was able detect local hot spots around a reference implant accurately with high signal-to-noise ratio. AO sensor exhibited similar or better performance when compared with commercially available MRI compatible electric field sensors. Furthermore, the small size of the sensor with the flexible fiber optic link could allow in situ measurements of electric fields during critical interventional procedures such as pacemaker lead or deep brain stimulator placement as an MRI dosimeter during diagnostic scans.

Application of Low Temperature Processed 0-3 Composite Piezoelectric Thick Films in Flexible, Non-planar, High Frequency Ultrasonic Devices.

Low-temperature, flexible, 0-3 composite piezoelectric materials can decrease the size, cost, and complexity of high-frequency acoustic devices on temperature sensitive substrates such as those in catheter based ultrasonic devices and acoustooptic sensors. In this paper, the application of low-temperature 0-3 connected composite thick films in flexible, non-planar, high frequency ultrasonic devices is reported. A flexible high-frequency ultrasound transducer and an acousto-optic radio-frequency (RF) field sensor are demonstrated utilizing PZT-based composite thick films. Flexible composite films have been fabricated with thicknesses between 20-100µm utilizing screen-printing, stencil-printing, and dip-coating techniques. Composite films' piezoelectric d33 coefficient is measured, with results between 35-43 pC/N. Ultrasonic transducers utilizing these films demonstrate broadband acoustic response. A composite transducer is fabricated on flexible polyimide and wrapped around a 3mm catheter. Pulse-echo experiments demonstrate viability of these films as both as an actuator and a sensor in flexible devices. The composite material is further dip-coated onto an optical fiber Bragg grating to form a flexible acousto-optic RF field sensor. The sensor demonstrates RF field sensing in the 20-130 MHz range. The results from these experiments indicate significant potential for future flexible, high frequency ultrasonic devices utilizing low temperature 0-3 composite piezoelectric materials on temperature sensitive substrates.

Are concentrations of pollutants in sharks, rays and skates (Elasmobranchii) a cause for concern? A systematic review.

This review represents a comprehensive analysis on pollutants in elasmobranchs including meta-analysis on the most studied pollutants: mercury, cadmium, PCBs and DDTs, in muscle and liver tissue. Elasmobranchs are particularly vulnerable to pollutant exposure which may pose a risk to the organism as well as humans that consume elasmobranch products. The highest concentrations of pollutants were found in sharks occupying top trophic levels (Carcharhiniformes and Lamniformes). A human health risk assessment identified that children and adults consuming shark once a week are exposed to over three times more mercury than is recommended by the US EPA. This poses a risk to local fishing communities and international consumers of shark-based products, as well as those subject to the widespread mislabelling of elasmobranch products. Wider screening studies are recommended to determine the risk to elasmobranchs from emerging pollutants and more robust studies are recommended to assess the risks to human health.

The state of POPs in Ghana- A review on persistent organic pollutants: Environmental and human exposure.

Ghana is one of the top pesticide users and highest persistent organic pollutant (POP) emitters in sub-saharan Africa. Despite recent increases in published data, there is limited information on how POP concentrations have changed, post ratification of the Stockholm Convention. As a result, this review aims to address these knowledge gaps by collating available data that reported POPs in Ghanaian environmental matrices, identify spatial and temporal trends, and establish potential health risks. It is worth noting that Ghana has not developed its own regulatory standards for POPs, but adapts United States Environmental Protection Agency (USEPA) standards. Results obtained showed concentrations in excess of USEPA regulatory standards for per- and poly-fluoroalkyl sulphonates (PFASs) and dichlorodiphenyldichloroethane (DDD) in water, polychlorinated and polybrominated dibenzo-p-dioxins and furans (PCDD/Fs and PBDD/Fs) in e-waste soils, and polybrominated diphenyl ethers in aquatic organisms and dairy products. The published studies do not cover major regions nationwide. The inconsistency in methods and analytes measured, along with data scarcity in some regions, makes it challenging to identify temporal trends. However, the data did indicate decreasing concentrations of some legacy POPs in soil/sediment and aquatic organisms, with increasing concentrations of some POPs in water, fish, fruits and vegetables. Studies that performed health risks assessments were limited although the data indicated risks to e-waste workers, some farmers and vulnerable sub-populations. This review identified potential human health risks from POPs in the Ghanaian environment and the need for more consistent and widespread monitoring program.

Radiation safety for radiologic technologists.

Radiologic technologists and ancillary staff who work with or near ionizing radiation face possible short- and long-term effects of occupational radiation exposure. Further, radiologic technologists must minimize unnecessary exposure that risks the patient's safety, while achieving the best possible image or outcome. This article reviews occupational dose limits, dose calculation, devices used to measure exposure, and safety best practices that can help technologists keep radiation exposure "as low as reasonably achievable" for them and their patients. The article also discusses the appropriate use of mounted and mobile equipment, personal protective equipment, and safety features on imaging equipment to minimize unnecessary radiation exposure.