Tactile feedback display with spatial and temporal resolutions.

We report the electronic recording of the touch contact and pressure using an active matrix pressure sensor array made of transparent zinc oxide thin-film transistors and tactile feedback display using an array of diaphragm actuators made of an interpenetrating polymer elastomer network. Digital replay, editing and manipulation of the recorded touch events were demonstrated with both spatial and temporal resolutions. Analog reproduction of the force is also shown possible using the polymer actuators, despite of the high driving voltage. The ability to record, store, edit, and replay touch information adds an additional dimension to digital technologies and extends the capabilities of modern information exchange with the potential to revolutionize physical learning, social networking, e-commerce, robotics, gaming, medical and military applications.

Bistable large-strain actuation of interpenetrating polymer networks.

The bistable electroactive polymer is a new smart material capable of large strain, rigid-to-rigid actuation. At the rubbery state of the polymer heated to above its glass transition, stable electrically-induced actuation is obtained at strains as large as 150%. Electromechanical instability can be effectively overcome by the formation of interpenetrating polymer networks. An application as a refreshable braille display is demonstrated.

Compliant silver nanowire-polymer composite electrodes for bistable large strain actuation.

A new compliant electrode-based on silver nanowire-polymer composite has been developed. The composite electrode has low sheet resistance (as low as 10 Ω/sq), remains conductive (10(2) -10(3) Ω/sq) at strains as high as 140%, and can support Joule heating. The combination of the composite and a bistable electroactive polymer produces electrically-induced, large-strain actuation and relaxation, reversibly without the need of mechanical programming.

Particulate air pollution and socioeconomic position in rural and urban areas of the Northeastern United States.

OBJECTIVES: Although differential exposure by socioeconomic position (SEP) to hazardous waste and lead is well demonstrated, there is less evidence for particulate air pollution (PM), which is associated with risk of death and illness. This study determined the relationship of ambient PM and SEP across several spatial scales. METHODS: Geographic information system-based, spatio-temporal models were used to predict PM in the Northeastern United States. Predicted concentrations were related to census tract SEP and racial composition using generalized additive models. RESULTS: Lower SEP was associated with small, significant increases in PM. Annual PM(10) decreased between 0.09 and 0.93 micrograms per cubic meter and PM(2.5) between 0.02 and 0.94 micrograms per cubic meter for interquartile range increases in income. Decrements in PM with SEP increased with spatial scale, indicating that between-city spatial gradients were greater than within-city differences. The PM-SEP relation in urban tracts was not substantially modified by racial composition. CONCLUSIONS: Lower compared with higher SEP populations were exposed to higher ambient PM in the Northeastern United States. Given the small percentage change in annual PM(2.5) and PM(10), SEP was not likely a major source of confounding in epidemiological studies of PM, especially those conducted within a single urban/metropolitan area.

Advances in dielectric elastomers for actuators and artificial muscles.

A number of materials have been explored for their use as artificial muscles. Among these, dielectric elastomers (DEs) appear to provide the best combination of properties for true muscle-like actuation. DEs behave as compliant capacitors, expanding in area and shrinking in thickness when a voltage is applied. Materials combining very high energy densities, strains, and efficiencies have been known for some time. To date, however, the widespread adoption of DEs has been hindered by premature breakdown and the requirement for high voltages and bulky support frames. Recent advances seem poised to remove these restrictions and allow for the production of highly reliable, high-performance transducers for artificial muscle applications.

Hand-held photoionization instruments for quantitative detection of sarin vapor and for rapid qualitative screening of contaminated objects.

Suitable detectors are needed to support survey needs of incident responders and health care personnel who may receive patients from an incident with exposures to hazardous chemicals. In the health care setting, such a detector would avoid cross-contamination to workers, patients, and to the treatment facility and associated equipment. An ideal survey detector would be sensitive, hand-held, capable of extended battery operation, and would provide a nearly immediate detector response on exposure to a broad range of high-concern chemicals. For responders, important capabilities would include quantitative measurement of gas/vapor contamination, and for both response and health care settings, qualitative detection of contaminated people and objects. In this study, the operating characteristics of photoionization detector (PID) instruments were examined using O-isopropyl methylphosphonofluoridate (sarin) in a laboratory setting. Instrument response factors were calculated for quantitation of airborne sarin, and speed of detector response and recovery were examined with point-contaminated cloth material. By sampling a range of sarin-contaminated air, calculated isobutylene unit response factors for high-and moderate-sensitivity commercial PID instrument types were 11.3 and 14.0 (dry air) and 20.1 and 44.4 (50% relative humidity), respectively. Response of the PID systems was highly correlated to concentration sampled, with R(2) values greater than or equal to 0.997 for all combinations of PID detector type and humidity. While not sensitive enough to warn the unprotected public against a chemical with an extremely low "safe" exposure concentration, quantitation with available PID instruments could be useful to quickly prioritize corrective measures for a PID-detectable chemical. Qualitative survey characteristics were examined for the more sensitive PID tested using a piece of cloth material contaminated by a 1.0 micro L droplet of liquid sarin. Rapid response and recovery times (seconds) were observed when the sampling inlet was moved close to and away from the point of contamination. Within the health care setting, hand-held PID instruments could fill an important and currently unmet need as a point source detector for liquid contamination from extremely dangerous chemicals to help identify contaminated surfaces and limit secondary contamination and exposures.