RESUMEN
Aerogels are an exciting class of materials with record-breaking properties including, in some cases, ultra-low thermal conductivities. The last decade has seen a veritable explosion in aerogel research and industry R&D, leading to the synthesis of aerogels from a variety of materials for a rapidly expanding range of applications. However, both from the research side, and certainly from a market perspective, thermal insulation remains the dominant application. Unfortunately, continued progress in this area suffers from the proliferation of incorrect thermal conductivity data, with values that often are far outside of what is possible within the physical limitations. This loss of credibility in reported thermal conductivity data poses difficulties in comparing the thermal performance of different types of aerogels and other thermal superinsulators, may set back further scientific progress, and hinder technology transfer to industry and society. Here, we have compiled 519 thermal conductivity results from 87 research papers, encompassing silica, other inorganic, biopolymer and synthetic polymer aerogels, to highlight the extent of the problem. Thermal conductivity data outside of what is physically possible are common, even in high profile journals and from the world's best universities and institutes. Both steady-state and transient methods can provide accurate thermal conductivity data with proper instrumentation, suitable sample materials and experienced users, but nearly all implausible data derive from transient methods, and hot disk measurements in particular, indicating that under unfavorable circumstances, and in the context of aerogel research, transient methods are more prone to return unreliable data. Guidelines on how to acquire reliable thermal conductivity data are provided. This paper is a call to authors, reviewers, editors and readers to exercise caution and skepticism when they report, publish or interpret thermal conductivity data.
RESUMEN
Silica aerogels are high-performance thermal insulation materials that can be used to provide unique solutions in the envelopes of buildings when space is limited. They are most often applied in historic buildings due to thin insulation thicknesses and since they are compatible with historic structures. In 2021, the first Aerogel Architecture Award was held at Empa in Switzerland in order to collect, evaluate and award outstanding uses of this relatively new building material. From the submitted projects, three were selected for an award by an expert jury. They showcased applications in which heritage protection and the conservation of a building's character and expression were reconciled with significant improvements in the energy efficiency of the building. The submissions also showed that a broader communication of these types of solutions is important in order to provide more information and security to planners and heritage offices and to facilitate the application of these materials in the future so that they can contribute to the protection of cultural heritage and reductions in the operational and embodied emissions of our building stock by extending the life expectancy and energy efficiency of existing buildings.
RESUMEN
PURPOSE: To analyze the outcome of surgical treatment of tarsal coalition, assess the role of the surgical technique, as well as of coalition size and type on outcomes. METHODS: The search followed the Preferred Reporting Items of Systematic Review and Meta-Analysis and was performed in four databases: MEDLINE, Central, Scopus and Web of Science. The protocol has been registered in the international prospective register of systematic reviews. Patient-reported outcomes (PROMs), complications, revisions and radiographic recurrence were collected. Risk of bias was assessed using MINORS criteria. A random-effects model for meta-analysis was applied for analysis of data heterogeneity. RESULTS: Twenty-five studies including 760 tarsal coalitions were included and had a weighted average follow-up of 44 months. Studies scored fair to poor on the risk of bias assessment with a mean MINORS score of 67% (44-81%). In 77.8% (37.5-100%) of surgically treated tarsal coalitions, good/excellent/non-limiting or improved PROMs were reported. Calculated data heterogeneity was moderate (I2 = 57%). Open bar resection with material interposition had a clinical success rate of 78.8% (50-100%). Complications occurred in 4.96% of cases. Coalition size did not prove to be a determining factor in postoperative outcome. The influence of the coalition type was not investigated by any of the studies. CONCLUSION: Data on outcomes of surgical management for tarsal coalitions is limited to retrospective case series with high risk of bias and moderate data heterogeneity. In about ¾ of cases, open resection and interposition of material results in improved PROMs. The arbitrary margin of ≥ 50% of TC coalition size in relation to the posterior facet has little importance in surgical decision-making. None of the studies reported on the influence of the coalition type on postoperative clinical success.
Asunto(s)
Sinostosis , Huesos Tarsianos , Coalición Tarsiana , Humanos , Estudios Retrospectivos , Sinostosis/complicaciones , Sinostosis/cirugía , Revisiones Sistemáticas como Asunto , Huesos Tarsianos/cirugía , Coalición Tarsiana/complicacionesRESUMEN
BACKGROUND: Fusion of the first metatarsophalangeal (MTP1) joint is a common surgery performed to correct hallux rigidus, hallux rigidus et valgus and other painful degenerative diseases of the MTP1. AIM: To assess outcomes of our surgical technique including non-union rates, accuracy and aims of correction. METHODS: Between September 2011 and November 2020 a total 72 of MTP1 fusions were performed using a low profile, pre-contoured dorsal locking plate and a plantar compression screw. Union and revision rates were analyzed with a minimum clinical and radiological follow up of at least 3 mo (range 3-18 mo). The following parameters were evaluated on pre- and postoperative conventional radiographs: Intermetatarsal angle, Hallux-valgus angle, dorsal extension of the proximal phalanx (P1) in relation to the floor and the angle between the Metatarsal 1 and the P1 (MT1-P1 angle). Descriptive statistical analysis was performed. Pearson analysis was used to assess for correlations between radiographic parameters and achievement of fusion. RESULTS: An overall union rate of 98.6% (71/72) was achieved. Two out of 72 patients did not primarily fuse with one patient suffering from a non-union, whilst the other demonstrating a radiological delayed union without clinical symptoms, with eventually complete fusion after 18 mo. There was no correlation between the measured radiographic parameters and the achievement of fusion. We believe the reason for the non-union was mainly attributed to the patient's incompliance without wearing the therapeutic shoe leading to a fracture of the P1. Furthermore, we didn`t find any correlation between fusion and the degree of correction. CONCLUSION: With our surgical technique, high union rates (98%) can be achieved using a compression screw and a dorsal variable-angle locking plate to treat degenerative diseases of the MTP1.
RESUMEN
Owing to their ultralow thermal conductivity and open pore structure1-3, silica aerogels are widely used in thermal insulation4,5, catalysis6, physics7,8, environmental remediation6,9, optical devices10 and hypervelocity particle capture11. Thermal insulation is by far the largest market for silica aerogels, which are ideal materials when space is limited. One drawback of silica aerogels is their brittleness. Fibre reinforcement and binders can be used to overcome this for large-volume applications in building and industrial insulation5,12, but their poor machinability, combined with the difficulty of precisely casting small objects, limits the miniaturization potential of silica aerogels. Additive manufacturing provides an alternative route to miniaturization, but was "considered not feasible for silica aerogel"13. Here we present a direct ink writing protocol to create miniaturized silica aerogel objects from a slurry of silica aerogel powder in a dilute silica nanoparticle suspension (sol). The inks exhibit shear-thinning behaviour, owing to the high volume fraction of gel particles. As a result, they flow easily through the nozzle during printing, but their viscosity increases rapidly after printing, ensuring that the printed objects retain their shape. After printing, the silica sol is gelled in an ammonia atmosphere to enable subsequent processing into aerogels. The printed aerogel objects are pure silica and retain the high specific surface area (751 square metres per gram) and ultralow thermal conductivity (15.9 milliwatts per metre per kelvin) typical of silica aerogels. Furthermore, we demonstrate the ease with which functional nanoparticles can be incorporated. The printed silica aerogel objects can be used for thermal management, as miniaturized gas pumps and to degrade volatile organic compounds, illustrating the potential of our protocol.
RESUMEN
Approximately 7-10% of all emergency department patients are diagnosed with distortion of the upper ankle joint. A dislocation of the upper ankle joint without fracture is described in the literature as being very rare. In 33-50% the ankle dislocations are at least first-degree open and associated with a fracture of the tibia, the fibula or the talus. We report the course, treatment and results 12 months after trauma of a posteromedial first-degree open dislocation of the upper ankle joint without fracture. To our knowledge, there is no record of this pathology mentioned in the German language literature.
Asunto(s)
Fracturas Óseas , Luxaciones Articulares , Astrágalo , Tobillo , Peroné , HumanosRESUMEN
Silica aerogels are excellent thermal insulators, but their brittle nature has prevented widespread application. To overcome these mechanical limitations, silica-biopolymer hybrids are a promising alternative. A one-pot process to monolithic, superinsulating pectin-silica hybrid aerogels is presented. Their structural and physical properties can be tuned by adjusting the gelation pH and pectin concentration. Hybrid aerogels made at pHâ 1.5 exhibit minimal dust release and vastly improved mechanical properties while remaining excellent thermal insulators. The change in the mechanical properties is directly linked to the observed "neck-free" nanoscale network structure with thicker struts. Such a design is superior to "neck-limited", classical inorganic aerogels. This new class of materials opens up new perspectives for novel silica-biopolymer nanocomposite aerogels.
RESUMEN
In order to assess the possible risks of applications containing engineered nanomaterials, it is essential to generate more data about their release and exposure, so far largely overlooked areas of research. The aim of this work was to study the characterization of the materials released from paint containing nano-SiO2 during weathering and exposure to water. Panels coated with nano-SiO2 containing paint and a nano-free reference paint were exposed to accelerated weathering cycles in a climate chamber. The total release of 89 six-hour cycles of UV-illumination and precipitation was 2.3% of the total SiO2 contained in the paint. Additional tests with powdered and aged paint showed that the majority of the released Si was present in dissolved form and that only a small percentage was present in particulate and nano-particulate form. TEM imaging of the leachates indicated that the majority of the particulate Si was contained in composites together with Ca, representing the paint matrix, and only few single dispersed SiO2-NPs were detected. The results suggest that toxicological and ecotoxicological studies need to consider that the released particles may have been transformed or are embedded in a matrix.
Asunto(s)
Nanoestructuras/análisis , Pintura , Dióxido de Silicio/análisis , Rayos Ultravioleta , Contaminantes Químicos del Agua/análisis , Agua/química , Nanoestructuras/química , Pintura/efectos de la radiación , Dióxido de Silicio/química , Contaminantes Químicos del Agua/químicaRESUMEN
The release of nanomaterials from products and applications that are used by industry and consumers has only been studied to a very limited extent. The amount and the characteristics of the released particles determine the potential environmental exposure. In this work we investigated the release of Ti from paints containing pigment-TiO2 and nano-TiO2. Panels covered with paint with and without nano-TiO2 were exposed to simulated weathering by sunlight and rain in climate chambers. The same paints were also studied in small-scale leaching tests to elucidate the influence of various parameters on the release such as composition of water, type of support and UV-light. Under all conditions we only observed a very low release close to background values, less than 1.5 µg l(-1) in the climate chamber over 113 irrigations per drying cycle and between 0.5 and 14 µg l(-1) in the leaching tests, with the highest concentrations observed after prolonged UV-exposure. The actual release of Ti over the 113 weathering cycles was only 0.007% of the total Ti, indicating that TiO2 was strongly bound in the paint. Extraction of UV-exposed and then milled paint resulted in about 100-times larger release of Ti from the nano-TiO2 containing paint whereas the paint with only pigment-TiO2 did not show this increase. This indicated that the release of Ti from the paints is an effect of the addition of nano-TiO2, either by photocatalytic degradation of the organic paint matrix (observed by electron microscopic imaging of the paint surface) or by direct release of nano-TiO2. Our work suggests that paints containing nano-TiO2 may release only very limited amounts of materials into the environment, at least over the time-scales investigated in this work.
Asunto(s)
Nanopartículas/análisis , Pintura , Titanio/análisis , Contaminantes Químicos del Agua/análisis , Ambiente Controlado , Microscopía Electrónica de RastreoRESUMEN
BACKGROUND: The objective of this study was to determine the long-term survivorship and clinical and radiographic results of the Scandinavian Total Ankle Replacement (STAR). METHODS: From February 1996 to March 2000, seventy-seven ankles in seventy-two patients (thirty-seven female and thirty-five male patients, with an average age of fifty-six years) underwent total ankle replacement using the STAR prosthesis with a single coating of hydroxyapatite. Two patients were lost to follow-up, and twelve patients with thirteen ankle replacements died. The average duration of follow-up for the patients without revision was 12.4 years (range, 10.8 to 14.9 years). Sixty-two of the seventy-seven ankles were available for final follow-up. RESULTS: Twenty-nine (38%) of the seventy-seven ankles had a revision of at least one of the metallic components. The probability of implant survival was 70.7% at ten years and 45.6% at fourteen years. The main reasons for revision were aseptic loosening, subsidence of the talar component, and progressive cyst formation. Polyethylene insert fractures were observed in eleven ankles. CONCLUSIONS: While the midterm to short-term results for patients managed with the STAR prosthesis have been encouraging at 3.7 years, the long-term survivorship of the same cohort was considerably inferior. The subjective and clinical results of the patients with retained prostheses are generally good and comparable with results reported in the current literature.
Asunto(s)
Artroplastia de Reemplazo de Tobillo/instrumentación , Prótesis Articulares , Osteoartritis/cirugía , Falla de Prótesis/etiología , Adulto , Anciano , Anciano de 80 o más Años , Artroplastia de Reemplazo de Tobillo/efectos adversos , Estudios de Cohortes , Análisis de Falla de Equipo , Femenino , Humanos , Masculino , Persona de Mediana Edad , Osteoartritis/etiología , Osteoartritis/patología , Diseño de Prótesis/efectos adversos , Reoperación , Factores de Riesgo , Países Escandinavos y Nórdicos , Factores de Tiempo , Adulto JovenRESUMEN
Combined subtalar and naviculocuneiform fusion was successful in restoring the longitudinal medial arch after extended breakdown while preserving the talon avicular joint. This surgical technique was shown to give a reliable fusion and biomechanically stable position of the foot. In this review article, we summarize the medial column procedures for flatfoot deformity and present our surgical technique and results of 10 consecutive patients treated with this method at a minimum 1-year follow-up.
Asunto(s)
Artrodesis/métodos , Pie Plano/cirugía , Articulaciones Tarsianas , Pie Plano/diagnóstico , Pie Plano/etiología , Humanos , Fijadores Internos , Selección de PacienteRESUMEN
Surface reactions of 4-aminothiophenol (4-ATP) with a series of heterogeneous crosslinkers containing both maleimide and succinimidyl ester groups were investigated with infrared reflection absorption spectroscopy (IRRAS) and X-ray photoelectron spectroscopy (XPS). Two types of surface reactions exist: (1) for most crosslinkers, a dominant reaction of amine and succinimidyl ester gave homogeneous maleimide-pendant surfaces; (2) for other crosslinkers, a side reaction between amine and maleimide, accompanying the main reaction, yielded heterogeneous surfaces with two linking groups, maleimide and succinimidyl ester. A typical example for the second case is the reaction of surface amines with N-succinimidyl-6-maleimidylhexanoate (SMH). Finally, a peptide, H-Gly-Arg-Gly-Asp-Ser-Pro-Cys-OH (GRGDSPC), was immobilized on the SMH-derived surface as a bridging structure through two linkages, cysteine thioether and glycine amide.