Nanocomposite system with photoactive phloxine B eradicates resistant Staphylococcus aureus.

Nanomaterials modified with hybrid films functionalized with photoactive compounds can be an effective system to prevent and eradicate biofilms on medical devices. The aim of this research was to extend current knowledge on nanomaterial comprised of polyurethane (PU) modified with a nanocomposite film of organoclay with the functionalized photosensitizer (PS) phloxine B (PhB). Particles of the clay mineral saponite were, at first modified by octadecyltrimethylammonium cations to activate the surface for PhB adsorption. The colloids were filtered to get silicate films on polytetrafluoroethylene membrane filters, which were layered with a liquid mixture of PU precursors. The penetration of PU into the silicate formed a thin nanocomposite film. This nanomaterial demonstrated excellent effectiveness against methicillin-resistant S. aureus (MRSA) resistant to fluoroquinolones (L12 and S61, respectively). It showed more than 1000- and 10 000-fold inhibition of biofilm growth after irradiation with green laser compared to the unmodified PU material. Principal component analysis and multiple linear regression showed that the effectiveness of the nanomaterial was not influenced by virulence factors such as the expression of efflux pumps of the Nor family, the adhesin PIA encoded by the icaADBC operon or the robustness of the biofilms. However, the presence of organoclay, PhB and irradiation had a significant effect on the anti-biofilm properties of the nanocomposite. The anti-microbial properties of the material were strengthened after irradiation, because of high reactive oxygen species release (more than 14-fold compared to non-irradiated sample). Materials based on photoactive molecules can represent a worthwhile pathway towards the development of more complex nanomaterials applicable in various fields of medicine.

Controversial Issues Related to Dye Adsorption on Clay Minerals: A Critical Review.

This critical review points out the most serious and problematic issues to be found in the literature on the adsorption of dyes on clay minerals. The introduction draws attention to the fundamental problems, namely the insufficient characterization of adsorbents, the influence of impurities on the adsorption of dyes, and the choice of inappropriate models for the description of the very complex systems that clay minerals and their systems represent. This paper discusses the main processes accompanying adsorption in colloidal systems of clay minerals. The relationship between the stability of the colloidal systems and the adsorption of dye molecules is analyzed. The usual methodological procedures for determining and evaluating the adsorption of dyes are critically reviewed. A brief overview and examples of modified clay minerals and complex systems for the adsorption of organic dyes are summarized. This review is a guide for avoiding some faults in characterizing the adsorption of organic dyes on clay minerals, to improve the procedure for determining adsorption, to evaluate results correctly, and to find an appropriate theoretical interpretation. The main message of this article is a critical analysis of the current state of the research in this field, but at the same time, it is a guide on how to avoid the most common problems and mistakes.

Adsorption of Dye Molecules and Its Potential for the Development of Photoactive Hybrid Materials Based on Layered Silicates.

The present paper gives a brief account of the latest advances in understanding of the mechanism and implications of dye adsorption with a special focus on layered silicate surfaces. It has been clearly demonstrated that the controlled adsorption of novel or already well-known dyes has equally great yet unexplored potential. In principle, the well-engineered surface confinement of the molecules may lead to their aggregation, adsorption, or intercalation-induced fluorescence emission even with conventional dyes, which are not considered as luminophores in solutions or in the solid state. We envision the utilization of silicate-based heterogeneous systems to produce novel polymer blended films or structured liquids, as well as to develop a plethora of other photophysical and biomedical applications.

Modified Polymer Surfaces: Thin Films of Silicate Composites via Polycaprolactone Melt Fusion.

Polymer/layered silicate composites have gained huge attention in terms of research and industrial applications. Traditional nanocomposites contain particles regularly dispersed in a polymer matrix. In this work, a strategy for the formation of a composite thin film on the surface of a polycaprolactone (PCL) matrix was developed. In addition to the polymer, the composite layer was composed of the particles of saponite (Sap) modified with alkylammonium cations and functionalized with methylene blue. The connection between the phases of modified Sap and polymer was achieved by fusing the chains of molten polymer into the Sap film. The thickness of the film of several µm was confirmed using electron microscopy and X-ray tomography. Surfaces of precursors and composite materials were analyzed in terms of structure, composition, and surface properties. The penetration of polymer chains into the silicate, thus joining the phases, was confirmed by chemometric analysis of spectral data and changes in some properties upon PCL melting. Ultimately, this study was devoted to the spectral properties and photoactivity of methylene blue present in the ternary composite films. The results provide directions for future research aimed at the development of composite materials with photosensitizing, photodisinfection, and antimicrobial surfaces.

Reaction of N-Acetylcysteine with Cu2+: Appearance of Intermediates with High Free Radical Scavenging Activity: Implications for Anti-/Pro-Oxidant Properties of Thiols.

We studied the kinetics of the reaction of N-acetyl-l-cysteine (NAC or RSH) with cupric ions at an equimolar ratio of the reactants in aqueous acid solution (pH 1.4−2) using UV/Vis absorption and circular dichroism (CD) spectroscopies. Cu2+ showed a strong catalytic effect on the 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) radical (ABTSr) consumption and autoxidation of NAC. Difference spectra revealed the formation of intermediates with absorption maxima at 233 and 302 nm (ε302/Cu > 8 × 103 M−1 cm−1) and two positive Cotton effects centered at 284 and 302 nm. These intermediates accumulate during the first, O2-independent, phase of the NAC autoxidation. The autocatalytic production of another chiral intermediate, characterized by two positive Cotton effects at 280 and 333 nm and an intense negative one at 305 nm, was observed in the second reaction phase. The intermediates are rapidly oxidized by added ABTSr; otherwise, they are stable for hours in the reaction solution, undergoing a slow pH- and O2-dependent photosensitive decay. The kinetic and spectral data are consistent with proposed structures of the intermediates as disulfide-bridged dicopper(I) complexes of types cis-/trans-CuI2(RS)2(RSSR) and CuI2(RSSR)2. The electronic transitions observed in the UV/Vis and CD spectra are tentatively attributed to Cu(I) → disulfide charge transfer with an interaction of the transition dipole moments (exciton coupling). The catalytic activity of the intermediates as potential O2 activators via Cu(II) peroxo-complexes is discussed. A mechanism for autocatalytic oxidation of Cu(I)−thiolates promoted by a growing electronically coupled −[CuI2(RSSR)]n− polymer is suggested. The obtained results are in line with other reported observations regarding copper-catalyzed autoxidation of thiols and provide new insight into these complicated, not yet fully understood systems. The proposed hypotheses point to the importance of the Cu(I)−disulfide interaction, which may have a profound impact on biological systems.

Surface Characterization and Anti-Biofilm Effectiveness of Hybrid Films of Polyurethane Functionalized with Saponite and Phloxine B.

The main objective of this work was to synthesize composites of polyurethane (PU) with organoclays (OC) exhibiting antimicrobial properties. Layered silicate (saponite) was modified with octadecyltrimethylammonium cations (ODTMA) and functionalized with phloxine B (PhB) and used as a filler in the composites. A unique property of composite materials is the increased concentration of modifier particles on the surface of the composite membranes. Materials of different compositions were tested and investigated using physico-chemical methods, such as infrared spectroscopy, X-ray diffraction, contact angle measurements, absorption, and fluorescence spectroscopy in the visible region. The composition of an optimal material was as follows: nODTMA/mSap = 0.8 mmol g-1 and nPhB/mSap = 0.1 mmol g-1. Only about 1.5% of present PhB was released in a cultivation medium for bacteria within 24 h, which proved good stability of the composite. Anti-biofilm properties of the composite membranes were proven in experiments with resistant Staphylococcus aureus. The composites without PhB reduced the biofilm growth 100-fold compared to the control sample (non-modified PU). The composite containing PhB in combination with the photodynamic inactivation (PDI) reduced cell growth by about 10,000-fold, thus proving the significant photosensitizing effect of the membranes. Cell damage was confirmed by scanning electron microscopy. A new method of the synthesis of composite materials presented in this work opens up new possibilities for targeted modification of polymers by focusing on their surfaces. Such composite materials retain the properties of the unmodified polymer inside the matrix and only the surface of the material is changed. Although these unique materials presented in this work are based on PU, the method of surface modification can also be applied to other polymers. Such modified polymers could be useful for various applications in which special surface properties are required, for example, for materials used in medical practice.

Accession Site Does Not Influence the Risk of Stroke after Diagnostic Coronary Angiography or Intervention: Results from a Large Prospective Registry.

INTRODUCTION: Periprocedural stroke represents a rare but serious complication of cardiac catheterization. Pooled data from randomized trials evaluating the risk of stroke following cardiac catheterization via transradial versus transfemoral access showed no difference. On the other hand, a significant difference in stroke rates favoring transradial access was found in a recent meta-analysis of observational studies. Our aim was to determine if there is a difference in stroke risk after transradial versus transfemoral catheterization within a contemporary real-world registry. METHODS: Data from 14,139 patients included in a single-center prospective registry between 2009 and 2016 were used to determine the odds of periprocedural transient ischemic attack (TIA) and stroke for radial versus femoral catheterization via multivariate logistic regression with Firth's correction. RESULTS: A total of 10,931 patients underwent transradial and 3,208 underwent transfemoral catheterization. Periprocedural TIA/stroke occurred in 41 (0.29%) patients. Age was the only significant predictor of TIA/stroke in multivariate analysis, with each additional year representing an odds ratio (OR) = 1.09 (CI 1.05-1.13, p < 0.000). The choice of accession site had no impact on the risk of periprocedural TIA/stroke (OR = 0.81; CI 0.38-1.72, p = 0.577). CONCLUSION: Observational data from a large prospective registry indicate that accession site has no influence on the risk of periprocedural TIA/stroke after cardiac catheterization.

Non-Arrhenius kinetics and slowed-diffusion mechanism of molecular aggregation of a rhodamine dye on colloidal particles.

The non-covalent association is important for many fields of science, including processes in living systems. This work elucidates the mechanism of rhodamine 123 molecular aggregation in dispersions of a layered silicate and explains the mystery of the slow kinetics of this process. Chemometric analysis of thousands of spectra recorded by stopped-flow visible spectroscopy identified two parallel diffusion processes described by a two-phase exponential function. The slow and fast processes followed the super-Arrhenius kinetics and were assigned to lateral (surface) diffusion and inter-particle diffusion of dye cations, respectively. This work, supported by a large amount of data and their in-depth analysis, provides the first evidence of how these processes coexist together and provides quantitative analysis of their dependence on the reaction conditions. The implications of this work can be crucial for understanding the mechanism of the non-covalent association of adsorbed molecules in nature.

Physico-Chemical Characterization and Antimicrobial Properties of Hybrid Film Based on Saponite and Phloxine B.

This research was aimed at the preparation of a hybrid film based on a layered silicate saponite (Sap) with the immobilized photosensitizer phloxine B (PhB). Sap was selected because of its high cation exchange capacity, ability to exfoliate into nanolayers, and to modify different surfaces. The X-ray diffraction of the films confirmed the intercalation of both the surfactant and PhB molecules in the Sap film. The photosensitizer retained its photoactivity in the hybrid films, as shown by fluorescence spectra measurements. The water contact angles and the measurement of surface free energy demonstrated the hydrophilic nature of the hybrid films. Antimicrobial effectiveness, assessed by the photodynamic inactivation on hybrid films, was tested against a standard strain and against methicillin-resistant bacteria of Staphylococcus aureus (MRSA). One group of samples was irradiated (green LED light; 2.5 h) and compared to nonirradiated ones. S. aureus strains manifested a reduction in growth from 1-log10 to over 3-log10 compared to the control samples with Sap only, and defects in S. aureus cells were proven by scanning electron microscopy. The results proved the optimal photo-physical properties and anti-MRSA potential of this newly designed hybrid system that reflects recent progress in the modification of surfaces for various medical applications.

Kinetics of ABTS derived radical cation scavenging by bucillamine, cysteine, and glutathione. Catalytic effect of Cu(2+) ions.

Kinetics of reduction of the stable radical cation derived from 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid (ABTS) in reaction with the anti-rheumatic drug bucillamine (BUC) and two reference thiols - cysteine (Cys) and glutathione (GSH) was followed spectrophotometrically in acidic medium with 10-fold molar excess of the reductant. Decay of the radical is governed by pseudo-first order kinetics with small deviation in the case of GSH. H(+) ions displayed second order inhibition of the reaction with all the studied compounds. The reaction of BUC exhibits zero order kinetics to the radical at lower acidities with a moderate acceleration of the reaction rate by H(+) ions. A significant catalytic effect of Cu(2+) ions on the reactions with all the reductants was observed. The most sensitive to Cu(2+)-catalysis was the reaction of BUC with the radical cation, while Cu(2+) ions showed much lower effect on the reaction with GSH. The presence of EDTA strongly inhibited the reactions and equalized the reaction rates for all the reductants. A Cu(I) selective chelator bathocuproine disulfonate reduced the reaction rate with Cys, but accelerated the reaction with BUC at the lower acidities. The experimental results were rationalized in the framework of the mechanism of reductive chelation. The conclusions may have important consequences for interpretation of antioxidant capacity assays, such as TEAC, utilizing the ABTS derived radical cation.

Photophysical and antibacterial properties of complex systems based on smectite, a cationic surfactant and methylene blue.

Solid or colloidal materials with embedded photosensitizers are promising agents from the medical or environmental perspective, where the direct use of photoactive solutions appears to be problematic. Colloids based on layered silicates of the saponite (Sap) and montmorillonite (Mon) type, including those modified with dodecylammonium cations (C12) and photosensitizer--methylene blue (MB) were studied. Two representatives of bacteria, namely Enterobacter cloacae and Escherichia coli, were selected for this work. A spectral study showed that MB solutions and also colloids with Sap including C12 exhibited the highest photoactivities. The antimicrobial properties of the smectite colloids were not directly linked to the photoactivity of the adsorbed MB cations. They were also influenced by other parameters, such as light vs. dark conditions, the spectrum, power and duration of the light used for the irradiation; growth phases, and the pre-treatment of microorganisms. Both the photoactivity and antimicrobial properties of the colloids were improved upon pre-modification with C12. Significantly higher antimicrobial properties were observed for the colloids based on Mon with MB in the form of molecular aggregates without significant photoactivities. The MB/Mon colloids, both modified and non-modified with C12 cations, exhibited higher antimicrobial effects than pure MB solution. Besides the direct effect of photosensitization, the surface properties of the silicate particles likely played a crucial role in the interactions with microorganisms.

Highly fluorescent colloids based on rhodamine 6G, modified layered silicate, and organic solvent.

Synthetic layered silicate saponite was modified with dodecyltrimethylammonium (C12), octadecyltrimethylammonium (C18), and dioctadecyldimethylammonium (2C18) cations for use as sorbents of the laser dye, rhodamine 6G (R6G). Via solvent exchange, transparent colloids in xylene were prepared and investigated using absorption and fluorescence spectroscopies. Molecular aggregation and partial quenching of the fluorescence were observed for the colloids based on 2C18 cations. Maximal fluorescence yields were observed for the colloids with C12 and C18 cations. Transparent gels without an apparent loss of luminescent efficiency could be prepared by concentrating the colloids. These highly fluorescent colloids and gels represent new types of materials with interesting optical properties.

Two-step resonance energy transfer between dyes in layered silicate films.

Single- and two-step fluorescence resonance energy transfer (FRET) was investigated between laser dyes rhodamine 123 (R123), rhodamine 610 (R610), and oxazine 4 (Ox4). The dye molecules played the role of molecular antennas and energy donors (ED, R123), energy acceptors (EA, Ox4), or both (R610). The dye cations were embedded in the films based on layered silicate laponite (Lap) with the thickness of several µm. Optically homogeneous films were prepared directly from dye/Lap colloids. Dye concentration in the films was high enough for FRET to occur but sufficiently low to prevent the formation of large amounts of molecular aggregates. The films were characterized by absorption and fluorescence spectroscopies, and their optical properties were compared with colloid precursors and dye aqueous solutions. The phenomenon of FRET was confirmed by means of steady-state and time-resolved fluorescence spectroscopies. Significant quenching of ED emission in favor of the luminescence from EA molecules was observed. FRET led to the decrease in the lifetimes of excited states of ED molecules. Molecular orientation of dye molecules was determined by polarized absorption and fluorescence spectroscopies. Almost parallel orientation with respect to silicate surface (∼30°) was determined for all fluorescent species of the dyes. Theoretical model on relationship between anisotropy and molecular orientation of the fluorophores fits well with measured data. The analysis of anisotropy measurements confirmed the significant role of FRET in the phenomenon of light depolarization.

Spectral properties of rhodamine 6G in smectite dispersions: effect of the monovalent cations.

Montmorillonite monoionic forms with alkali metal and NH(4)(+)-cations were prepared by ion exchange. The hydration properties and binding of the ions to montmorillonite surface and the swelling properties of the mineral specimens were analyzed. Whereas Na(+)- and Li(+)-ions were fully hydrated over a large range of conditions, large size K(+), NH(4)(+), and mainly Rb(+) and Cs(+) ions were apt to bind directly to the oxygen atoms on the mineral surface. The forms with large ions exhibited reduced hydration and swelling and the absence of macroscopic swelling of the respective aqueous colloids. The interaction of laser dye rhodamine 6G (R6G) in montmorillonite colloids was investigated by absorption and steady-state fluorescence spectroscopies. Significant effects of the properties of both the inorganic ions and swelling properties of colloidal dispersions on R6G molecular aggregation were observed. Large amounts of the molecular aggregates were formed in the colloids of Na(+)- and Li(+)-montmorillonites. The aggregates absorbed light at significantly lower wavelengths (~460 nm) with respect to the light absorption by monomers (535 nm). Fluorescence spectroscopy provided a key evidence for the assignment of the type of the aggregates: The emission of the aggregates at relatively low energies proved these assemblies are rather a mixed H-/J-type than ideal H-aggregates. The presence of parent inorganic cations of larger size led to a significant lowering of the amount of the R6G aggregates in favor of the monomers. Investigations of the evolution of the dye aggregation with time indicated basic features of dye aggregation reaction: The size of parent inorganic ions did not affect the reaction mechanism, but rather limited the extent of the reaction. Probably the forms with large inorganic ions, such as Rb(+) and Cs(+), did not provide sufficient surface for the formation of the large size assemblies of the dye. This property can be explained in terms of strong association of the large alkali metal ions to clay mineral surface, as well as to reduced swelling in the colloidal systems of respective forms.

Synthesis and characterization of low dimensional ZnS- and PbS-semiconductor particles on a montmorillonite template.

Low dimensional metal sulfide particles have been prepared in the interlayers of montmorillonites via reactions of the metal ion-exchanged clay minerals in aqueous dispersions with gaseous hydrogen sulfide. The montmorillonites separated from the Wyoming (USA) and Jelsový Potok (Slovakia) bentonites were saturated with Pb(2+) or Zn(2+). In the final nanohybrids, the smectite mineral can be incorporated with metal sulfide pillars and/or nanoparticles. Properties of the prepared materials were investigated by various analytical techniques. The formation of metal sulfide nanoparticles in the interlayer galleries was indicated by X-ray diffraction and energy dispersive X-ray analysis. About 50% of Pb(2+) or Zn(2+) present in montmorillonite has formed metal sulfide semiconducting units. Infrared spectroscopy and thermogravimetric analysis were used for characterization of starting materials and products. Ultraviolet-visible absorption and photoluminescence spectroscopies confirmed that final composite systems acquired the optical properties of the incorporated quantum low dimensional systems exhibiting blue shift of the energy gap and higher oscillator strength excitonic peaks. Larger amounts of metal sulfide nanoparticles were formed in montmorillonite Jelsový Potok probably as a consequence of its higher cation exchange capacity.

Clay mineral particles as effficient carriers of methylene blue used for antimicrobial treatment.

There is a strong demand to identify new strategies for disinfection and treatment of human, animal, and plant pathogens. The presented work shows the potential of clay minerals to contribute to the development of novel disinfection materials. Enhanced antimicrobial effect of a photoactive organic dye, methylene blue (MB), in the colloids of clay mineral was observed. Singlet oxygen (1O2) formed upon visible light irradiation was detected directly using luminescence measurements atthe near-infrared region and by spin-trapping method. While MB adsorbed on clay colloid particles lost the ability to produce 1O2 due to molecular aggregation, surprisingly, the antimicrobial activity was significantly enhanced. Under visible light irradiation, MB/clay minerals dispersions prevented the sporulation of A. niger and Penicillium sp. and inhibited the growth of C. albicans by an additional 6-15% when compared with MB solution. In the experiments with E. coli, the efficiency of MB was increased by the reduction of surviving cells by 27 and 33%. S. aureus proved to be the most susceptible to MB/clay dispersions. Only less than 20% cells survived with respect to the control experiment at the low MB concentration (1.1 x 10(-6) mol dm(-3)). The contradiction between the significant antimicrobial properties of MB in clay colloidal systems and low 1O2 formation can be explained in terms of the photosensitization mechanism. The role of clay particles is most likely to promote the contact between microorganism cells and photoactive MB. Although the dye directly bound to the clay surface exhibits significantly reduced photoactivity, the presence of clay mediates the delivery of dye molecules on the surface or inside cells. The results indicate new perspectives of potential implementations of clay minerals as parts of complex disinfection materials for industrial applications or in understanding similar processes in nature.

Spectral properties and structure of the J-aggregates of pseudoisocyanine dye in layered silicate films.

Hybrid films composed of pseudoisocyanine (PIC) and layered silicates were prepared by direct adsorption from dye solution. Properties of the films were characterized by absorption and fluorescence spectroscopy, which indicated the formation of two types of J-molecular aggregates. Molecular arrangement and structure of the J-aggregates were investigated by means of linearly polarized absorption spectroscopy and X-ray diffraction (XRD). Structural models of the two main types of J-aggregates with oblique and those of parallel molecular alignments were designed. The spectral properties of these species were studied in detail. All the films contained a mixture of both types of the J-molecular assemblies. Predominance of either species likely depends on the layer charge of the silicate template.

Photoactive oriented films of layered double hydroxides.

The treatment of nano-ordered oriented films of layered double hydroxide (LDH) with dodecyl sulfate increased the interlayer distance from 0.4 to 1.96 nm, which allowed the intercalation of 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS). The re-stacking of separated layers and the rebuilding of crystals oriented parallel to the surface of quartz slides was confirmed by X-ray diffraction and atomic force microscopy. The hybrid films contained homogeneously distributed porphyrin molecules with preserved photophysical properties such as fluorescence, triplet state formation, and energy transfer, thus forming singlet oxygen.

Spectral properties of rhodamine 3B adsorbed on the surface of montmorillonites with variable layer charge.

Montmorillonite was thermally treated at several temperatures to reduce the charge density of its layer surface. Absorption and fluorescence (steady-state and time-resolved) spectroscopies are now applied to study the adsorption of rhodamine 3B (R3B) laser dye in reduced charge montmorillonites (RCMs) in aqueous suspensions. The decrease in the charge density increases the intermolecular distance between adsorbed R3B molecules, reducing the tendency of the dye to self-associate. H-type and J-type aggregates of R3B in RCMs are spectroscopically characterized, the fluorescent J-aggregates being more extensively formed by decreasing the charge density. Both the reduction in the dye aggregation and the formation of J-type aggregates enhance the fluorescence efficiency of R3B dye adsorbed in montmorillonite particles. Absorption with linearly polarized light reveals that the H-aggregates are more disposed toward the perpendicular of the clay surface than the monomer and J-aggregates species.

Molecular aggregation of rhodamine dyes in dispersions of layered silicates: influence of dye molecular structure and silicate properties.

The molecular aggregation of six rhodamine dyes (rhodamine 560, B, 3B, 19, 6G, 123) in layered silicate (saponite and fluorohectorite) dispersions was investigated by using visible (vis) spectroscopy. The dye molecular aggregation was influenced by the properties of both the silicates and the dyes themselves. The layer charge of the silicates enhanced the molecular aggregation of the hydrophilic, cationic dyes. The presence of a carboxyl acid group in the dye molecules inhibited adsorption of the dyes on the surface of fluorohectorite, a silicate with a high charge density. A lower or no adsorption could be observed by vis spectroscopy. Strong association of the dyes to the silicate surface led to remarkable changes in the dye spectra, mainly due to the molecular aggregation. Dye assemblies initially formed after mixing the dye solutions with silicate dispersions were unstable. Decomposition of the dye molecular assemblies, and the formation of new species or molecular aggregate rearrangements, were studied on the bases of time-difference spectra. The reaction pathways were specific, not only for the dyes, depending upon their molecular structure and properties, but also on the silicate substrates.