RESUMEN
PMMA particle synthesis was performed from MMA (methyl methacrylate) and water mixtures, exposed to different ultrasonic systems and frequencies. The sonication sequence was 20kHzâ580kHzâ858kHzâ1138kHz, and the solution was sampled after each irradiation step for polymerization. Effects of sonication parameters (time, power), polymerization method (thermo-initiated or photo-initiated), use of small amounts of surfactant (Triton X-100™ or Tween® 20) and initial MMA quantity were investigated on particle size and synthesis yields. Particle size and size distribution were measured by DLS (Dynamic Light Scattering), and confirmed via SEM (Scanning Electron Microscopy) images. Synthesis yield was calculated using the dry weight method. Particle composition was estimated using FTIR (Fourier Transform Infra-Red) spectroscopy. PMMA (polymethylmethacrylate) monodispersed particles were successfully synthesized, with a possibility of control in the 78-310nm size range. These sized-controlled particles were synthesized with a 7.5-85% synthesis yield (corresponding to 7.5-40g/L particle solid content), depending on operational parameters. Furthermore, a trade-off between particle size and synthesis yield can be proposed: 20kHzâ10min waiting timeâ580kHzâ858kHz leading to 90nm particles diameter with 72% yield in less than 40min for the whole sequence. Thus, the synthesis under ultrasound can be found easy to implement and time efficient, ensuring the success of the scale-up approach and opening up industrial applications for this type of polymeric particles.
RESUMEN
Optimization of surface treatment for reversible adhesion of micro-objects in liquid environment for the need in microassembly processes is presented. A spherical borosilicate probe and planar oxidized silicon wafer substrates were modified by deposition of pH sensitive polyelectrolyte films through layer-by-layer technique. Branched polyethylenimine (b-PEI) and poly(sodium styrenesulfonate) (PSS) were deposited in alternating manner on surfaces, and the influence of polyelectrolyte concentration, pH of deposition, and number of layers on the adhesion were successively examined. The multilayer buildup was followed by optical reflectometry (OR) and dissipative quartz crystal microbalance (QCM-D). The adhesion forces were monitored in aqueous environment at variable pH values by colloidal probe AFM microscopy. The thermodynamic work of adhesion was derived from the pull-off forces by using the Johnson-Kendall-Roberts (JKR) model and compared to the work of adhesion determined from contact angle measurements. It was found out that they correlate well, however, the values accessed from JKR model were underestimated, which was attributed mainly to the effect of surface roughness. Obtained results have demonstrated that it is possible to achieve repeatable reversible adhesion with the change of pH of submerged environment by appropriately tailoring the surface properties and therefore the prevailing surface forces.
RESUMEN
This paper deals with the effect of ultrasound on polypyrrole/SiO2 composite film elaboration through various steps (particle dispersion, electrosynthesis). Experiments were carried out on stainless steel in phosphoric acid solution. An efficient method for dispersion of SiO2 particles prior to electropolymerization, based on low frequency irradiation (20kHz), was proposed. It was shown that mechanical effects of high frequency ultrasound (i.e. mass transfer improvement) led to enhancement of electropolymerization kinetics. Scanning electron microscopy imaging and glow discharge optical emission spectroscopy revealed localization of SiO2 particles in the outer region of the films as well as better incorporation of particles under high frequency ultrasound irradiation. Finally, anticorrosion behavior of formed films was investigated in sodium chloride solution by Open Circuit Potential and anodic polarization methods. The results showed that polypyrrole/SiO2 films elaborated under ultrasound irradiation exhibit the best protective performances.
RESUMEN
Self-assembled multilayer films made of PEDOT:PSS poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) and PDDA poly(diallyldimethylammonium chloride) were prepared using layer-by-layer method. In order to modify the growth regime of the multilayer, to fabricate an electrical conductive film and to control its thickness, the effects of pH, type of electrolyte, ionic strength and polyelectrolyte concentration were investigated. Optical reflectometry measurements show that the pH of the solutions has no effect on the film growth while the adsorbed amount increases more rapidly when BaCl2 is used instead of NaCl as electrolyte. An increase in the ionic strength (with NaCl) induces a change in the growth regime from a linear to an exponential one at low polyelectrolyte concentration. As UV-vis measurements indicate, no decomplexation of PEDOT was recorded after film preparation. With polyelectrolyte concentration below 1 g L(-1), no conductive films were obtained even if 50 bilayers were deposited. A conductive film was prepared with a polyelectrolyte concentration of 1 g L(-1) and the measured conductivity was 0.3 S m(-1). A slight increase in conductivity was recorded when BaCl2 was used probably due to a modification of the film structure.
RESUMEN
The 24 h stability of bare silicon wafers as such or silanized with CH(3)O-(CH(2)-CH(2)-O)(n)-C(3)H(6)-trichlorosilane (n=6-9) was investigated in water, NaCl, phosphate and carbonate solutions, and in phosphate buffered saline (PBS) at 37 °C (close to biological conditions regarding temperature, high ionic strength, and pH). The resulting surfaces were analyzed using ellipsometry, X-ray Reflectometry (XRR), X-ray Photoelectron Spectroscopy (XPS), and Atomic Force Microscopy (AFM). Incubation of the silanized wafers in phosphate solution and PBS provokes a detachment of the silane layer. This is due to a hydrolysis of Si-O bonds which is favored by the action of phosphate, also responsible for a corrosion of non-silanized wafers. The surface alteration (detachment of silane layer and corrosion of the non-silanized wafer) is also important with carbonate solution, due to a higher pH (8.3). The protection of the silicon oxide layer brought by silane against the action of the salts is noticeable for phosphate but not for carbonate.
Asunto(s)
Bisfenol A Glicidil Metacrilato/química , Fosfatos/química , Silicio/química , Cloruro de Sodio/química , Tampones (Química) , Humanos , Concentración de Iones de HidrógenoRESUMEN
The functionalization of an organic polyethersulfone membrane (PES) was performed by alternating deposition of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrene sulfonate) (PSS), leading to the formation of a polyelectrolyte multilayer film (PEM). The resulting assembly was characterized by tangential streaming potential measurements to determine the charge of the modified membranes as a function of the polyelectrolyte solution concentration and as a function of the immersion time of the membrane in the polyelectrolyte solutions. Then, the modified membranes were used to perform the ultrafiltration of aqueous solutions containing copper(II) ions. Different operating conditions were tested including: polyelectrolyte concentration, polyelectrolyte nature, thickness of the PEM film or pH of the Cu(2+) solutions. These filtration experiments demonstrated that it was possible to obtain a satisfactory retention of the copper ions (88%), thus proving that this type of assembly can be useful for the removal of copper ions from contaminated aqueous solutions.
RESUMEN
Grafting silicon wafers with CH(3)O(CH(2)CH(2)O)(n)C(3)H(6)-trimethoxysilane and -trichlorosilane (n=6 to 9) was performed in different conditions (solvent, reaction time, washing) in order to select procedures compatible with the design of nanostructured surfaces for biomaterial applications, using electron-beam lithography. After a first screening by principal component analysis (PCA), the X-ray photoelectron spectroscopy (XPS) data were analyzed by plotting the carbon to oxygen molar ratio vs the molar ratio of carbon singly bound to oxygen [CO] over carbon bound only to carbon and hydrogen [C(C,H)]. This was found to be a convenient method for discarding samples containing free polymerized silane. Such excess occurred as a result of insufficient washing or unsuitable solvent for the reaction (ether), as confirmed by AFM and thickness measured by X-ray reflectometry. Angle resolved XPS analysis indicated that the grafted silane layer had a 1-2 nm thickness and was covered by a thin layer of adventitious contaminant. As a result, the surface chemical composition obtained covered a broad range (O/C of 0.4 to 1.1; CO/C(C,H) of 2.5 to 6.5); variations could not be related to the nature of the silane reagent and no significant difference was found between hexane and toluene as solvent for the reaction. The grafted silane layer was not stable upon incubation during 24 h in phosphate buffered saline (PBS) at 37 degrees C, which mimics biological environments. As a consequence, the grafted wafers did not show protein repellent properties. This alteration was not observed at room temperature. XPS analysis demonstrated that silane layer detachment was due to a hydrolysis within the SiO(2) layer initially present at the wafer surface.
Asunto(s)
Materiales Biocompatibles Revestidos/química , Polietilenglicoles/química , Silicio/química , Adsorción , Falla de Equipo , Hidrólisis , Proteínas , Silanos/químicaRESUMEN
The layer-by-layer deposition of two polyelectrolytes, quaternized poly(dimethylaminoethyl methacrylate chloride) (MADQUAT) and poly(acrylic acid) (PAA) on a silica substrate was investigated using optical reflectometry, as a function of pH (pH 4, 5.5 and 9), ionic strength (10(-3) to 10(-1) M) and type of salt. Attention was given to the successive deposited weights and to the corresponding deposited charge densities within the ten first deposited layers. Results show a change of growth regime between an early stage where the substrate had a dominating influence in the build-up and a second stage where the polymer uptake was ruled essentially by polymer-polymer interactions. The pH was seen to influence the growth via the charge densities of silica (first stage) and PAA (first and second stages). The increase of NaCl concentration induced an increase of the film weight between 10(-3) and 10(-2) M, but the trend was more sophisticated between 10(-2) and 10(-1) M where the polymer uptake increased in the first stage of the growth and decreased in subsequent layers. The film weight increased in accordance with the rank of ions in the Hofmeister series. AFM images revealed a heterogeneous film morphology with bumps and valleys, which was explained by a growth mechanism made of the successive formation and growth of polymer complexes.
RESUMEN
This work aimed to the determination of weight uptakes and charge balance in the course of successive deposition of polyelectrolytes, using the so-called self-assembled multilayer technique. Polyelectrolytes were the quaternized polydimethylaminoethyl methacrylate chloride, (MADQUAT) and poly(acrylic acid) (PAA). Experiments were made at pH 5.5 in NaCl solutions between 10(-3) and 10(-1) M. Deposits (5 bilayers) on a gold substrate were monitored using a quartz crystal microbalance (QCM) and optical fixed-angle reflectometry. Analysis of data lead to the determination of the sensitivity factor of the reflectometric output. QCM allowed the direct measurement of weight uptakes in 10(-3) and 10(-2) M solutions, while the viscoelastic properties of the film did not look appropriate for the measurement in 10(-1) M solutions. The layer-by-layer uptakes and charge balances in 10(-3) and 10(-2) M solutions revealed a large contribution of the counterions in the neutralization of the electrical charge in the film, more so for the highly charged MADQUAT polymer. The difference between two successive polymer charge densities increased significantly with the layer number and the electrolyte concentration. The increase of NaCl concentration induced an increase of MADQUAT but reversely a decrease of PAA deposits. The results were consistent with the determining influence of the salt in polyelectrolyte adsorption, both with regards to the concentration and the type of ions that has been well demonstrated in the literature. This work also draws attention to the role of small ions in the structural and application properties of self-assembled multilayer films.