RESUMEN
An innovative nanotechnology-based approach was used for the preparation of Centella asiatica (C. asiatica) extract-SiO2 nanocomposites, specifically tailored for skin protection from oxidative damage. Different amounts of C. asiatica glycolic extract (1.0, 3.0, 5.0, and 10.0 wt %) and fumed silica were used to prepare the nanocomposites by means of ball milling method. The influence of both composition of the starting mixture and milling time on the final products was evaluated by different techniques such as X-ray powder diffraction, scanning electron microscopy, infrared spectroscopy, thermogravimetric analysis, and nitrogen sorption analysis. Results confirmed the integrity of the natural extract after the milling process, and its successful loading in the silica matrix. No cytotoxicity was observed for the obtained nanocomposites, which showed high in-vitro ability to scavenge 2,2-diphenyl-1-picrylhydrazyl and to protect human keratinocytes from damages induced with hydrogen peroxide.
Asunto(s)
Nanocompuestos , Dióxido de Silicio , Humanos , Estrés Oxidativo , Sistemas de Liberación de MedicamentosRESUMEN
We report on the green preparation of one-dimensional metal coordination polymers by sonochemical approach. The spacer ligand 4,4'-bipyridine was ultrasonicated with chloride or acetate zinc salts to obtain [Zn(4,4'-bipy)Cl2]∞ and [Zn(4,4'-bipy)2(OAc)2]∞, respectively. Benign solvents such as ethanol and water were selected as reaction media, and the synthesis took place in a few minutes-a very short time compared to conventional methods where some days' synthesis is required. X-ray powder diffraction, Fourier transform infrared spectroscopy, thermal analysis (thermogravimetric and differential scanning calorimetry), and CHN techniques investigated the influence of using different reaction solvents on the chemical, structural, and thermal properties of the final products. The 1D [Zn(4,4'-bipy)Cl2]∞ and [Zn(4,4'-bipy)2(OAc)2]∞ polymers, in agreement with the structures reported in the literature, were obtained in the form of nanocrystals with an average crystal size around 100 nm. As a proof of concept, a set of Gram-positive (Staphylococcus aureus) and Gram-negative bacteria (Klebsiella pneumoniae), and three yeast strains (Candida albicans, Candida krusei, Candida glabrata) were tested to evaluate the antimicrobial activity of the coordination polymers, following the Kirby-Bauer procedure and microplate dilution method. Thus, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and minimal biofilm inhibitory concentration (MBIC) were evaluated. Except for Candida krusei, the compounds showed an appreciable antimicrobial and antibiofilm activity against these strains grown in the liquid medium.
Asunto(s)
Antiinfecciosos , Polímeros , Antibacterianos/farmacología , Antiinfecciosos/farmacología , Cloruros , Etanol , Ligandos , Pichia , Polímeros/química , Piridinas , Sales (Química) , Solventes , Agua , Zinc/químicaRESUMEN
In this work, the influence of the use of alternative inexpensive silica sources on the structural, morphological and textural properties of MCM-41 like mesoporous materials to be used for biomedical applications has been investigated. The Liquid Crystal Template Method has been used to prepare the ordered mesoporous structured materials according to a novel composition starting from fumed silica or granular silica gel as alternative silica sources. The obtained materials have been characterized by X-ray Powder Diffraction, Transmission and Scanning Electron Microscopy, and nitrogen sorption, which showed for both samples the formation of the ordered hexagonal pore arrangement typical of a MCM-41 material. However, when using fumed silica, higher long-range hexagonal pore ordering as well as higher surface area have been obtained (1030 vs. 763 m²/g). For comparison, the features of a commercial silica mesostructured MCM-41 type have been investigated as well. Again, the silica fumed based sample has showed higher long-range hexagonal pore ordering, higher surface area and wall thickness. Preliminary stability studies on the fumed silica based material showed a decrease in the pore ordering at the end of the third year after the synthesis.
RESUMEN
Enzyme-containing Coordination Polymers (CPs) were prepared by a one-pot sonochemical method, mixing Glucose Oxidase (GOx) enzyme, 4,4'-bipyridine as spacer ligand, and chloride zinc salt. The reaction took place in a very short time (a few minutes) with a minimum use of solvents compared to conventional methods. The obtained composite material, named GOx-[Zn(4,4'-bipy)Cl2]∞, resulted from embedding the GOx molecules into uniformly sized [Zn(4,4'-bipy)Cl2] nanocrystals. The structural and thermal characterization, confirmed that the adopted strategy allows the preparation of hybrid bio-nanomaterials in a very fast, facile and eco-friendly method, by simply synthesising the [Zn(4,4'-bipy)Cl2] nanocrystals in the presence of the enzyme.
Asunto(s)
Nanoestructuras , Polímeros , Glucosa Oxidasa , Ligandos , ZincRESUMEN
Ferrite nanoparticles (NPs) are of special interest for a wide range of applications. Microemulsions represent the Renaissance of ferrite NP preparation offering a series of advantages with respect to other methods due the possibility to confine reactions into nanosized reactors. They allow the preparation in mild synthesis conditions of a wide variety of nanostructured ferrites with controlled composition, particle size and shape. This review wants to give a comprehensive overview of the microemulsion performance in the ferrite NP synthesis. Firstly, a general section on microemulsion properties is presented. The basics of NP formation mechanism, with a first-rate emphasis in the influence of microemulsion properties and dynamics on the control of NP size and shape, are addressed. A summary of the synthesis procedure evolution by both direct and reverse microemulsions over a selection of ferrite NPs is also provided in the review. Finally, the perspectives on microemulsion systems for ferrite NP preparation are quickly revised.
RESUMEN
Concentrated suspensions of silver and copper salts in silicone oil were heated to 200⯰C and irradiated with ultrasonic energy for different time durations. Characterization of the products was done using X-ray powder diffraction. In most cases, metallic Ag or Cu were obtained, together with their oxide forms Ag2O and Cu2O. The salts, used as precursors, do not dissolve in silicone oil but rather form a heterogeneous system, and we assume that local heating, caused by the acoustic cavitation, enhanced their thermal decomposition and the formation of metallic particles. It was found that the presence of silver particles enhances the formation of metallic copper. This phenomenon was observed in the experiment with the acetate salts mixture.
Asunto(s)
Duplicación Cromosómica , Cromosomas Artificiales Bacterianos , Hibridación Genómica Comparativa , Epilepsia/genética , Mosaicismo , Cromosomas en Anillo , Adolescente , Anticonvulsivantes/uso terapéutico , Cromosomas Humanos Par 20 , Resistencia a Medicamentos , Epilepsia/tratamiento farmacológico , Femenino , Predisposición Genética a la Enfermedad , Humanos , Fenotipo , SíndromeRESUMEN
BACKGROUND: A multiplicity of study designs such as gene candidate analysis, genome wide search (GWS) and, recently, whole genome association studies have been employed for the identification of the genetic components of essential hypertension (EH). Several genome-wide linkage studies of EH and blood pressure-related phenotypes demonstrate that there is no single locus with a major effect while several genomic regions likely to contain EH-susceptibility loci were validated by multiple studies. METHODS: We carried out the clinical assessment of the entire adult population in a Sardinian village (Talana) and we analyzed 16 selected families with 62 hypertensive subjects out of 267 individuals. We carried out a double GWS using a set of 902 uniformly spaced microsatellites and a high-density SNPs map on the same group of families. RESULTS: Three loci were identified by both microsatellites and SNP scans and the obtained linkage results showed a remarkable degree of similarity. These loci were identified on chromosome 2q24, 11q23.1-25 and 13q14.11-21.33. Further support to these findings is their broad description present in literature associated to EH or related phenotypes. Bioinformatic investigation of these loci shows several potential EH candidate genes, several of whom already associated to blood pressure regulation pathways. CONCLUSION: Our search for major susceptibility EH genetic factors evidences that EH in the genetic isolate of Talana is due to the contribution of several genes contained in loci identified and replicated by earlier findings in different human populations.