RESUMEN
Textile and cosmetic industries generate large amounts of dye effluents requiring treatment before discharge. This wastewater contains high levels of reactive dyes, low to none-biodegradable materials and chemical residues. Technically, dye wastewater is characterised by high chemical and biological oxygen demand. Biological, physical and pressure-driven membrane processes have been extensively used in textile wastewater treatment plants. However, these technologies are characterised by process complexity and are often costly. Also, process efficiency is not achieved in cost-effective biochemical and physical treatment processes. Membrane distillation (MD) emerged as a promising technology harnessing challenges faced by pressure-driven membrane processes. To ensure high cost-effectiveness, the MD can be operated by solar energy or low-grade waste heat. Herein, the MD purification of dye wastewater is comprehensively and yet concisely discussed. This involved research advancement in MD processes towards removal of dyes from industrial effluents. Also, challenges faced by this process with a specific focus on fouling are reviewed. Current literature mainly tested MD setups in the laboratory scale suggesting a deep need of further optimization of membrane and module designs in near future, especially for textile wastewater treatment. There is a need to deliver customized high-porosity hydrophobic membrane design with the appropriate thickness and module configuration to reduce concentration and temperature polarization (CP and TP). Also, energy loss should be minimized while increasing dye rejection and permeate flux. Although laboratory experiments remain pivotal in optimizing the MD process for treating dye wastewater, the nature of their time intensity poses a challenge. Given the multitude of parameters involved in MD process optimization, artificial intelligence (AI) methodologies present a promising avenue for assistance. Thus, AI-driven algorithms have the potential to enhance overall process efficiency, cutting down on time, fine-tuning parameters, and driving cost reductions. However, achieving an optimal balance between efficiency enhancements and financial outlays is a complex process. Finally, this paper suggests a research direction for the development of effective synthetic and natural dye removal from industrially discharged wastewater.
Asunto(s)
Colorantes , Destilación , Membranas Artificiales , Industria Textil , Eliminación de Residuos Líquidos , Aguas Residuales , Contaminantes Químicos del Agua , Aguas Residuales/química , Destilación/métodos , Colorantes/química , Colorantes/aislamiento & purificación , Eliminación de Residuos Líquidos/métodos , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Residuos IndustrialesRESUMEN
Lead and zinc (PbZn) mines are a common occurrence worldwide; and while approximately 240 mines are active, the vast majority have been abandoned for decades. Abandoned mining wastes represent a serious environmental hazard, as Pb, Zn and associated metals are continuously released into the environment, threatening the health of humans and affecting ecosystems. Iron sulfide minerals, when present, can form acid mine drainage and increase the toxicity by mobilizing the metals into more bioavailable forms. Remediation of the metal waste is costly and, in the case of abandoned wastes, the responsible party(ies) for the cleanup can be difficult to determine, which makes remediation a complex and lengthy process. In this review, we provide a common ground from a wide variety of investigations about concentrations, chemical associations, and potential mobility of Pb, Zn and cadmium (Cd) near abandoned PbZn mines. Comparing mobility results is a challenging task, as instead of one standard methodology, there are 4-5 different methods reported. Results show that, as a general consensus, the metal content of soils and sediments vary roughly around 1000mg/kg for Zn, 100 for Pb and 10 for Cd, and mobilities of Cd>Zn>Pb. Also, mobility is a function of pH, particle size, and formation of secondary minerals. New and novel remediation techniques continue to be developed in laboratories but have seldom been applied to the field. Remediation at most of the sites has consisted of neutralization (e.g. lime,) for acid mine discharge, and leveling followed by phytostabilization. In the latter, amendments (e.g. biochar, fertilizers) are added to boost the efficiency of the treatment. Any remediation method has to be tested before being implemented as the best treatment is site-specific. Potential treatments are described and compared.
Asunto(s)
Plomo/análisis , Metales Pesados/análisis , Minería , Contaminantes del Suelo/análisis , Suelo/química , Contaminantes Químicos del Agua/análisis , Zinc/análisis , Monitoreo del Ambiente/métodosRESUMEN
In this study, the feasibility of the direct contact membrane distillation (DCMD) process to recover arsenic, uranium and fluoride contaminated saline ground waters was investigated. Two types of membranes (polypropylene, PP; and polytetrafluoroethylene, PTFE) were tested to compare the permeate production rates and contaminant removal efficiencies. Several experiments were conducted to study the effect of salts, arsenic, fluoride and uranium concentrations (synthetic brackish water with salts: 1000-10,000 ppm; arsenic and uranium: 10-400 ppb; fluoride: 1-30 ppm) on the desalination efficiency. The effect of process variables such as feed flow rate, feed temperature and pore size was studied. The experimental results proved that the DCMD process is able to achieve over 99% rejection of the salts, arsenic, fluoride and uranium contaminants and produced a high quality permeate suitable for many beneficial uses. The ability to utilize the low grade heat sources makes the DCMD process a viable option to recover potable water from a variety of impaired ground waters.
Asunto(s)
Arsénico/análisis , Fluoruros/análisis , Flúor/análisis , Uranio/análisis , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Destilación , Diseño de Equipo , Calor , Membranas Artificiales , Polipropilenos/análisis , Politetrafluoroetileno/análisis , Sales (Química)/química , Temperatura , Contaminantes del Agua/análisisRESUMEN
This review focuses on the occurrence and treatment of arsenic (As) in the arid region of northern Mexico (states of Chihuahua and Coahuila) and bordering states of the southwestern US (New Mexico, Arizona, and Texas), an area known for having high As concentrations. Information assembled and assessed includes the content and probable source of As in water, soil, and sediments and treatment methods that have been applied in the area. High As concentrations were found mainly in groundwater, their source being mostly from natural origin related to volcanic processes with significant anthropogenic contributions near mining and smelting of ores containing arsenic. The affinity of As for solid phases in alkaline conditions common to arid areas precludes it from being present in surface waters, accumulating instead in sediments and shifting its threat to its potential remobilization in reservoir sediments and irrigation waterways. Factors such as oxidation and pH that affect the mobility of As in the subsurface environment are mentioned. Independent of socio-demographic variables, nutritional status, and levels of blood lead, cognitive development in children is being affected when exposed to As. Treatments known to effectively reduce As content to safe drinking water levels as well as those that are capable of reducing As content in soils are discussed. Besides conventional methods, emergent technologies, such as phytoremediation, offer a viable solution to As contamination in drinking water.
Asunto(s)
Arsénico/análisis , Agua Dulce/química , Contaminantes Químicos del Agua/análisis , Contaminación Química del Agua/estadística & datos numéricos , Arsénico/química , Monitoreo del Ambiente , Restauración y Remediación Ambiental/métodos , Sedimentos Geológicos/química , México , Suelo/química , Contaminantes del Suelo/análisis , Contaminantes del Suelo/química , Contaminantes del Suelo/toxicidad , Sudoeste de Estados Unidos , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/toxicidad , Purificación del Agua/métodos , Abastecimiento de Agua/análisisRESUMEN
Adsorption of uranium (VI) on a natural clinoptilolite zeolite from Sweetwater County, Wyoming was investigated. Batch experiments were conducted to study the effects of pH and initial feed concentrations on uranium removal efficiency. It was found that the clinoptilolite can neutralize both acidic and low basic water solutions through its alkalinity and ion-exchange reactions with U within the solution, and adsorption of uranium (VI) species on clinoptilolite not only depends on the pH but also the initial feed concentration. The highest uranium removal efficiency (95.6%) was obtained at initial uranium concentration of 5mg/L and pH 6.0. The Langmuir adsorption isotherm model correlates well with the uranium adsorption equilibrium data for the concentration range of 0.1-500 mg/L. From the experimental data obtained in this work, it was found that the zeolite sample investigated in this work is a mixture of clinoptilolite-Na zeolite and mineral impurities with a relatively large specific surface area (BET of 18 m(2)/g) and promising adsorption properties for uranium removal from contaminated water.
Asunto(s)
Uranio/aislamiento & purificación , Contaminantes Químicos del Agua/aislamiento & purificación , Purificación del Agua/métodos , Zeolitas/química , Adsorción , Concentración de Iones de Hidrógeno , Microscopía Electrónica de Rastreo/métodos , Nitrógeno/química , Temperatura , Factores de Tiempo , Oligoelementos/análisis , Uranio/química , Contaminantes Químicos del Agua/química , Zeolitas/aislamiento & purificaciónRESUMEN
This study presents observations on the transient leaching behavior of chromium, cadmium, and aluminum that were solidified/stabilized by pozzolanic fly ash. These three metals were selected since they were present in a simulated waste stream generated by an evaporator during plutonium purification and also because the minimum solubility of these metals occurs at significantly different pHs. The transient pH behavior of the toxicity characteristic leaching procedure (TCLP) leachate showed a monotonic increase for all cases, but the equilibrium value was affected by process conditions. The transient leachate concentration behavior showed curves with one or two local maxima for some cases and curves with a monotonic increase for other cases. Data from the leaching experiments was compared to the solubility curves for the hydroxides of each metal since it was assumed that the highly alkaline conditions inside the fly ash waste would cause the metals to precipitate as hydroxides after initially dissolving in the acidic leaching solution. It was found that of the three metals, only cadmium followed the solubility curve for pure hydroxide solutions or for fly ash systems currently reported in the literature.