Removal of Toxic Metal Ions Using Poly(BuMA-co-EDMA) Modified with C-Tetra(nonyl)calix[4]resorcinarene.

A copolymer of poly(BuMA-co-EDMA) modified with C-tetra(nonyl)calix[4]resorcinarene was obtained via the impregnation method. The formation of the modified copolymer was confirmed and investigated using various techniques; in this way, the presence of calix[4]resorcinarene was confirmed by FT-IR spectroscopy and by high resolution transmission electron microscopy. The modified copolymer was used for the removal of highly toxic cations (Pb2+, Hg2+, and Cd2+) from aqueous solutions. To perform the removal, we used the batch sorption technique and the effects of time of contact, pH, and volume of sample on the effective sorption were determined. The best results were observed for Pb2+ extraction, which was comparatively more efficient. Adsorption-desorption experiments revealed that the modified copolymer could be used for several cycles without significant loss of adsorption capacity. Finally, the results showed that the modified copolymer application is highly efficient for the removal of lead ions from aqueous solutions.

Cork sheet as a sorptive phase to extract hormones from water by rotating-disk sorptive extraction (RDSE).

This work reports for the first time the use of laminar cork as a sorptive phase in a microextraction technique, rotating-disk sorptive extraction (RDSE). Typical hormones (estrone, estradiol, estriol and ethinyl estradiol) were selected as analyte models and extracted from wastewater samples on laminar cork with statistically equivalent extraction efficiency to that provided by Oasis HLB. The cork characterization was performed by confocal fluorescence microscopy (CLSM), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), allowing the identification of lignin, suberin and polysaccharides (cellulose and hemicellulose) as the main components of the cork. The best conditions for extraction were as follows: rotation velocity of the disk, 2000 rpm; extraction time, 45 min; and sample volume, 20 mL. The analytical features of the developed method show that calibration curves for all analytes have R2 values higher than 0.99. The absolute recoveries were higher than 63%, and the precision, expressed as relative standard deviation, ranged from 2 to 16%. The LOD and LOQ ranges were 3-19 and 10-62 ng L-1, respectively. The proposed method was applied to the analysis of wastewater, and the concentrations of hormones in a wastewater treatment plant in Santiago, Chile, ranged from

Preparation of Methacrylate-based Polymers Modified with Chiral Resorcinarenes and Their Evaluation as Sorbents in Norepinephrine Microextraction.

Aminomethylation reactions between chiral amino compounds (S)-(-)-1-phenylethylamine and l-proline with tetranonylresorcinarene and tetra-(4-hydroxyphenyl)resorcinarene in presence of formaldehyde were studied. The reaction between l-proline and resorcinarenes generated regioselectively chiral tetra-Mannich bases, due to the molecular incorporation of the fragment of the chiral amino acid. On the other hand, tetranonylresorcinarene and (S)-(-)-1-phenylethylamine formed regio- and diasteroselectively chiral tetrabenzoxazines, both by chiral auxiliary functionalization and by the transformation of the molecular structure that confers inherent chirality. The products obtained were characterized using IR, 1H-NMR, 13C-NMR, COSY, HMQC, and HMBC techniques. The reaction of (S)-(-)-1-phenylethylamine with tetra-(4-hydroxyphenyl)resorcinarene did not proceed under the experimental conditions. Once the chiral aminomethylated tetra-(4-hydroxyphenyl)resorcinarene was obtained, the chemical modification of poly(GMA-co-EDMA) was studied, and the results showed an efficient incorporation of the aminomethylated compound. For the physical modification, chiral aminomethylated tetranonylresorcinarenes were employed, finding that the incorporation of modified resorcinarenes occurs, but with less efficiency than that observed using chemical modification. The modified polymers were characterized via FT-IR, scanning electron microscopy imaging, and elemental analysis. Finally, polymers modified with chiral resorcinarenes were used as sorbents in norepinephrine microextraction; for practical purposes, artificial urine was prepared and used. To perform the microextraction, the decision was made to use the modern rotating-disk sorptive extraction technique (RDSE), because of its analytical attributes as a green, or eco-friendly, technique. According to the results, the method preliminarily validated for the determination of norepinephrine in artificial urine shows that the modified polymer with chiral derivative of tetra-(4-hydroxyphenyl)resorcinarene worked effectively as a new sorbent phase for the quantitative microextraction of norepinephrine, exhibiting high stability and homogeneity of composition and structure within the working range.

Aminomethylated Calix[4]resorcinarenes as Modifying Agents for Glycidyl Methacrylate (GMA) Rigid Copolymers Surface.

Functionalization of tetrapropylcalix[4]resorcinarene, tetrapentylcalix[4]resorcinarene, tetranonylcalix[4]resorcinarene, and tetra-(4-hydroxyphenyl)calix[4]resorcinarene by means of aminomethylation reactions with the amino acids ß-alanine and l-proline in the presence of aqueous formaldehyde was carried out. When ß-alanine was used, the reaction products were tetrabenzoxazines. The reaction with tetra-(4-hydroxyphenyl)calix[4]resorcinarene did not proceed under the experimental conditions; therefore, l-proline was used, and the corresponding tetra-Mannich base was regio- and diasteroselectively formed. The products were characterized via FT-IR, 1H NMR, 13C NMR, and elemental analysis. With these aminomethylated-calix[4]resorcinarenes, the chemical surface modification of the copolymers poly(GMA-co-EDMA) and poly(BMA-co-EDMA-co-MMA) in a basic medium was studied. The results were quite satisfactory, obtaining the corresponding copolymers functionalized by nucleophilic substitution reaction and ring-opening between the carboxyl group of the upper rim of aliphatic calix[4]resorcinarenes and the hydroxyl group of the lower rim in the aromatic calix[4]resorcinarene and the epoxy group of the glycidyl methacrylate residue of each copolymer. The modified copolymers were characterized via FT-IR, scanning electron microscopy imaging, and elemental analysis. Finally, the modified copolymer surfaces exhibited interaction with peptides, showing their potential application in chromatographic separation techniques such as high-performance liquid chromatography.

Analysis by RP-HPLC and Purification by RP-SPE of the C-Tetra(p-hydroxyphenyl)resorcinolarene Crown and Chair Stereoisomers.

A method for the separation of stereoisomer mixture of the octol C-tetra(p-hydroxyphenyl)calix[4]resorcinarene that was obtained by an acid cyclocondensation reaction between resorcinol and benzaldehyde is reported in this paper. A crude product from octol formation reaction was analyzed by reverse-phase high-performance liquid chromatography (RP-HPLC), and two well-resolved signals corresponding to the crown and chair isomers were found. A reverse phase in solid-phase extraction (RP-SPE) protocol allowed the separation of the two stereoisomers with high purity of each isomer. Finally, the crude and purified stereoisomers were characterized by using FT-IR, 1H-NMR, and 13C-NMR techniques, confirming the chemical identity of the two isomers and the efficiency in the separation process.