Effect of calcium on enhanced carbon capture potential of coal fly ash zeolites. Part II: a study on the adsorption mechanisms.

Coal fly ash zeolites (CFAZs) of type X with low (Na-X) and medium (Na-Ca-X) content of calcium were synthesized by alkaline conversion of lignite coal fly ash generated by combustion of lignite with lower and higher limestone amounts, extracted from different coal deposits and burned in separate thermal power plants. The concentration and state of Ca in the zeolites were investigated by energy dispersive X-ray (EDX) analysis and X-ray photoelectron spectroscopy (XPS). CFAZs Na-Ca-X with a medium Ca-content were found to outperform their lower calcium counterparts Na-X in terms of carbon capture capacity. This provoked our research interest in elucidating the role of Ca in the CO2 retaining mechanism. CFAZs Na-X and Na-Ca-X were studied in consecutive dynamic adsorption cycles, after thermal regeneration at a temperature of 80 °C, at which only the physically adsorbed CO2 molecules can be released. Desorption was investigated by thermogravimetric TG-DTG analyses over a wide temperature range. In situ Fourier-transform infrared (FTIR) spectroscopy was performed to elucidate the structural features of Na-X and Na-Ca-X CFAZs and the types of their accessible adsorption sites. It was found that the role of Ca is to increase the number of accessible Na+ cations in SII and SIII positions in the zeolites where they can simultaneously adsorb two CO or CO2 molecules, which benefits their adsorption capacity. This study raises an issue on coal ash classification for the synthesis of zeolites with carbon capture applications.

Nickel-Decorated Mesoporous Iron-Cerium Mixed Oxides: Microstructure and Catalytic Activity in Methanol Decomposition.

Nickel-decorated mesoporous cerium-iron oxide composites were synthesized by a combination of incipient wetness impregnation and template-assisted hydrothermal techniques. The effects of the Fe/Ce ratio and the calcination temperature of cerium-iron oxides on the phase composition, texture, structure, and redox properties of the composites were studied by a combination of N2 physisorption, XRD, high-resolution transmission electron microscopy, SEM, Mössbauer, Raman, XPS, ultraviolet-visible and FTIR spectroscopies, H2-temperature-programmed reduction, and total oxidation of ethyl acetate as a catalytic test. The combined physicochemical characterization and in situ FTIR investigation of methanol decomposition was used for a proper understanding of the microstructure of the Ni/FeCe oxide composites and the mechanism of the reaction occurring on them. The complex role of the FeCe support in the stabilization of highly dispersed Ni particles, the generation of surface intermediates, and the impact of the support phase transformation under the reaction medium are discussed.

Power of Infrared and Raman Spectroscopies to Characterize Metal-Organic Frameworks and Investigate Their Interaction with Guest Molecules.

The variety of functionalities and porous structures inherent to metal-organic frameworks (MOFs) together with the facile tunability of their properties makes these materials suitable for a wide range of existing and emerging applications. Many of these applications are based on processes involving interaction of MOFs with guest molecules. To optimize a certain process or successfully design a new one, a thorough knowledge is required about the physicochemical characteristics of materials and the mechanisms of their interaction with guest molecules. To obtain such important information, various complementary analytical techniques are applied, among which vibrational spectroscopy (IR and Raman) plays an important role and is indispensable in many cases. In this review, we critically examine the reported applications of IR and Raman spectroscopies as powerful tools for initial characterization of MOF materials and for studying processes of their interaction with various gases. Both the advantages and the limitations of the technique are considered, and the cases where IR or Raman spectroscopy is preferable are highlighted. Peculiarities of MOFs interaction with specific gases and some inconsistent band assignments are also emphasized. Summarizing the broad analytical possibilities of the IR and Raman spectroscopies, we conclude that it can be applied in combinations with other techniques to explicitly establish the structure, properties, and reactivity of MOFs.

Purification of Hydrogen from CO with Cu/ZSM-5 Adsorbents.

The transition to a hydrogen economy requires the development of cost-effective methods for purifying hydrogen from CO. In this study, we explore the possibilities of Cu/ZSM-5 as an adsorbent for this purpose. Samples obtained by cation exchange from aqueous solution (AE) and solid-state exchange with CuCl (SE) were characterized by in situ EPR and FTIR, H2-TPR, CO-TPD, etc. The AE samples possess mainly isolated Cu2+ cations not adsorbing CO. Reduction generates Cu+ sites demonstrating different affinity to CO, with the strongest centres desorbing CO at about 350 °C. The SE samples have about twice higher Cu/Al ratios, as one H+ is exchanged with one Cu+ cation. Although some of the introduced Cu+ sites are oxidized to Cu2+ upon contact with air, they easily recover their original oxidation state after thermal treatment in vacuum or under inert gas stream. In addition, these Cu+ centres regenerate at relatively low temperatures. It is important that water does not block the CO adsorption sites because of the formation of Cu+(CO)(H2O)x complexes. Dynamic adsorption studies show that Cu/ZSM-5 selectively adsorbs CO in the presence of hydrogen. The results indicate that the SE samples are very perspective materials for purification of H2 from CO.

In situ FTIR Spectroscopy as a Tool for Investigation of Gas/Solid Interaction: Water-Enhanced CO2 Adsorption in UiO-66 Metal-Organic Framework.

In situ infrared spectroscopy is an inexpensive, highly sensitive, and selective valuable tool to investigate the interaction of polycrystalline solids with adsorbates. Vibrational spectra provide information on the chemical nature of adsorbed species and their structure. Thus, they are very useful for obtaining molecular level understanding of surface species. The IR spectrum of the sample itself gives some direct information about the material. General conclusions can be drawn concerning hydroxyl groups, some stable surface species and impurities. However, the spectrum of the sample is "blind" with respect to the presence of coordinatively unsaturated ions and gives rather poor information about the acidity of surface hydroxyls, species decisive for the adsorption and catalytic properties of the materials. Furthermore, no discrimination between bulk and surface species can be made. These problems are solved by the use of probe molecules, substances that interact specifically with the surface; the alteration of some spectral features of these molecules as a result of adsorption provides valuable information about the nature, properties, location, concentration, etc., of the surface sites. The experimental protocol for in-situ IR studies of gas/sample interaction includes preparation of a sample pellet, activation of the material, initial spectral characterization through the analysis of the background spectra, characterization by probe molecules, and study of the interaction with a particular set of gas mixtures. In this paper we investigate a zirconium terephthalate metal organic framework, Zr6O4(OH)4(BDC)6 (BDC = benzene-1,4-dicarboxylate), namely UiO-66 (UiO refers to University of Oslo). The acid sites of the UiO-66 sample are determined by using CO and CD3CN as molecular probes. Furthermore, we have demonstrated that CO2 is adsorbed on basic sites exposed on dehydroxylated UiO-66. Introduction of water to the system produces hydroxyl groups acting as additional CO2 adsorption sites. As a result, CO2 adsorption capacity of the sample is strongly enhanced.

Modulator-Controlled Synthesis of Microporous STA-26, an Interpenetrated 8,3-Connected Zirconium MOF with the the-i Topology, and its Reversible Lattice Shift.

A fully interpenetrated 8,3-connected zirconium MOF with the the-i topology type, STA-26 (St Andrews porous material-26), has been prepared using the 4,4',4"-(2,4,6-trimethylbenzene-1,3,5-triyl)tribenzoate (TMTB) tritopic linker with formic acid as a modulating agent. In the as-prepared form STA-26 possesses Im3‾ m symmetry compared with the Pm3‾ m symmetry of the non-interpenetrated analogue, NU-1200, prepared using benzoic acid as a modulator. Upon removal of residual solvent there is a shift between the interpenetrating lattices and a resultant symmetry change to Cmcm which is fully reversible. This is observed by X-ray diffraction and 13 C MAS NMR is also found to be remarkably sensitive to the structural transition. Furthermore, heating STA-26(Zr) in vacuum dehydroxylates the Zr6 nodes leaving coordinatively unsaturated Zr4+ sites, as shown by IR spectroscopy using CO and CD3 CN as probe molecules. Nitrogen adsorption at 77 K together with grand canonical Monte Carlo simulations confirms a microporous, fully interpenetrated, structure with pore volume 0.53 cm3 g-1 while CO2 adsorption at 196 K reaches 300 cm3 STP g-1 at 1 bar. While the pore volume is smaller than that of its non-interpenetrated mesoporous analogue, interpenetration makes the structure more stable to moisture adsorption and introduces shape selectivity in adsorption.

Problems in the IR measuring the acidity of zeolite bridging hydroxyls by low-temperature CO adsorption.

Two infrared OH stretching bands are produced after interaction of CO with H-ZSM-5 bridging hydroxyls. These two bands are not due to heterogeneity of the acid sites but arise from Fermi-resonance.

First results on Fe solid-phase extraction from coastal seawater using anatase TiO2 nano-particles.

This paper describes the application of TiO(2) nano-particles (anatase form) for the solid-phase extraction of iron from coastal seawater samples. We investigated the adsorption processes by infra-red spectroscopy. We compared in batch and on-(mini)column extraction approaches (0.1 and 0.05 g TiO(2) per sample, respectively), combined to external calibration and detection by inductively coupled plasma mass spectrometry at medium mass resolution. Globally, this titania phase was slightly more efficient with seawater than with ultra-pure water, although between pH 2 and pH 7, the Fe retention efficiency progressed more in ultra-pure water than in seawater (6.9 versus 4.8 times improvement). Different reaction schemes are proposed between Fe(III) species and the two main categories of titania sites at pH 2 (adsorption of [FeL(x)]((3-x)+) via possibly the mediation of chlorides) and at pH 7 (adsorption of [Fe(OH)(2)](+) and precipitation of [Fe(OH)(3)](0)). Under optimised conditions, the inlet system was pre-cleaned by pumping 6% HCl for approximately 2 h, and the column was conditioned by aspirating ultra-pure water (1.7 g min(-1)) and 0.05% ammonia (0.6 g min(-1)) for 1 min. Then 3 g seawater sample was loaded at the same flow rate while being mixed on-line with 0.05% ammonia at 0.6 g min(-1) to adjust the pH to 7. The iron retained on the oxide powder was then eluted with 3 g 6% HCl (<0.002% residual salinity in the separated samples). The overall procedural blank was 220 +/- 46 (2 s, n = 16) ng Fe kg(-1) (the titania was renewed in the column every 20 samples, with 2-min rinsing in between samples with 6% HCl at 1.5 g min(-1)). The recovery estimated from the Canadian certified reference material CASS-2 was 69.5 +/- 7.6% (2 s, n = 4). Typically, the relative combined uncertainty (k = 2) estimated for the measurement of approximately 1 microg Fe kg(-1) (0.45 microm filtered and acidified to pH 1.5) of seawater was approximately 12%. We applied our method to a similar sample, from the coastal region of the North Sea. The agreement well within stated uncertainties of our result with the value obtained independently by isotope dilution mass spectrometry further validated our method.

FTIR spectroscopy study of CO adsorption on Pt-Na-mordenite.

Different carbonyls are formed after CO adsorption at ambient temperature on a Pt-Na-mordenite (Pt-Na-MOR) sample. Pt(3+)(CO)(2) dicarbonyls (nu(s) at 2205 cm(-1) and nu(as) at 2167 cm(-1)) are decomposed without formation of monocarbonyls. The respective mixed-ligand species, Pt(3+)((12)CO)((13)CO), formed after (12)CO-(13)CO coadsorption, display bands at 2192 and 2131 cm(-1), in excellent agreement with the theoretically calculated values. Pt(2+)-CO species absorb at 2145 cm(-1) and are not able to accept a second CO molecule. Pt(+)-CO carbonyls are characterized by a band at 2111 cm(-1). Under CO equilibrium pressure, these species are converted into dicarbonyls (nu(s) at 2135 cm(-1) and nu(as) at 2101 cm(-1)). The respective mixed-ligand species, Pt(+)((12)CO)((13)CO), manifest bands at 2123 and 2069 cm(-1), in good agreement again with the theory. Different carbonyls of metallic platinum are observed below 2100 cm(-)(1). In addition, weakly adsorbed CO was registered as Na(+)-CO complexes (2177 and 2165 cm(-1)) and Na(+)-OC-Na(+) species (2138 cm(-1)). It was found that during desorption of CO platinum was reduced, ultimately to metal. However, heating in a NO + O(2) mixture leads to reoxidation of the metal particles and restoration of the initial state of the sample.

Electrothermal atomic absorption spectrometric determination of cadmium and lead with stabilized phosphate deposited on permanently modified platforms.

Some drawbacks of the phosphate modifier such as reagent blank contribution and background absorption in electrothermal atomic absorption spectrometric determination of cadmium and lead are substantially alleviated by application of small amounts of phosphate, approximately 0.2 mumol (25 mug of NH(4)H(2)PO(4) or (NH(4))(2)HPO(4)), on the integrated platform of transversely heated graphite atomizer pre-treated with 2.7 mumol of Zr (250 mug) or W (500 mug) and 0.1 mumol of Ir (20 mug). Pyrolysis temperatures for Cd and Pb are up to 900 and 1100 degrees C for aqueous solutions and within 400-600 degrees C (Cd) and 750-850 degrees C (Pb) for biological fluids (urine, blood) and tissues (hair, liver, muscle) solubilized with tetraethylammonium hydroxide. The thermally stabilized phosphate on Zr-Ir or W-Ir treated platforms serves as a permanent modifier in analyses of environmental waters by multiple hot injections of large sample aliquots. Applications to water and biological certified reference materials are tabulated and show good agreement with certified values. Characteristic masses are 0.7-1.0 pg for Cd and 26-31 pg for Pb.