RESUMEN
PURPOSE: To evaluate the effect of urethane methacrylate precursor (UMP) on the enzymatic resistance of demineralized dentin (DD) matrices. MATERIALS AND METHODS: Experimental treatments containing 0 (control), 1, and 5 mmol/L UMP dissolved in an acetone (Ace) solution were formulated. Dentin matrix specimens were demineralized in vitro and immersed in the experimental treatments for 1 h. The treated specimens were then stored in 0.1 mg/mL collagenase solution for 24 h, after which their dry mass loss and hydroxyproline (HYP) release were assessed. The swelling ratios of specimens in each group were also evaluated. The interaction between UMP and the dentin matrix was observed using field-emission scanning electron microscopy (FE-SEM). Endogenous enzyme activity in dentin was evaluated using confocal laser scanning microscopy (CLSM). RESULTS: Compared with the other treatment groups, treatment with 1 mM and 5 mM UMP-Ace significantly decreased the dry mass loss, HYP release and swelling ratio of the DD matrix (p < 0.05). FE-SEM and CLSM observations showed that treatment with UMP-Ace protected the structure of the dentin matrix and decreased porosity within the dentin-collagen network. CONCLUSION: Treatment with 1 mM and 5 mM UMP-Ace protects DD matrix against collagenase degradation and may be clinically useful for improving the durability of the hybrid layer.
Asunto(s)
Dentina , Metacrilatos , Microscopía Confocal , Microscopía Electrónica de Rastreo , Dentina/efectos de los fármacos , Humanos , Metacrilatos/química , Isocianatos/química , Recubrimiento Dental Adhesivo , Recubrimientos Dentinarios/química , Ensayo de Materiales , Colagenasas , Hidroxiprolina , Colágeno , Cementos de Resina/químicaRESUMEN
Multiple intracellular microRNA (miRNA) detection is essential for disease diagnosis and management. Nonetheless, the real-time detection of multiple intracellular miRNAs has remained challenging. Herein, we have developed an ultrasound (US)-powered nanomotor-based dynamic fluorescent probe for the real-time OFF-ON fluorescent determination of multiple intracellular miRNAs. The new probe relies on the utilization of multicolored quantum dot (QD)-labeled single-stranded DNA (ssDNA)/graphene oxide (GO)-coated US-powered gold nanowire (AuNW) nanomotors. The fluorescence of QDs is quenched due to π-π interactions with the GO. Upon binding to target miRNAs, the QDs-ssDNA is now distant from the AuNWs, resulting in effective OFF-ON QD fluorescence switching. Compared with conventional passive probes, the dynamic fluorescent probe enhances probe-target interactions by using the US-propelled nanomotor, resulting in exceptionally efficient and prompt hybridization. Simultaneous quantitative analysis of miR-10b and miR-21 in vitro can be achieved within 15 min with high sensitivity and specificity. Additionally, multicolor QDs provide strong signal intensity and multiplexed detection, enabling one-step real-time discrimination between cancer cells (A549) and normal cells (L02). The obtained results are in good agreement with those from qRT-PCR. This dynamic fluorescent probe based on a nanomotor and QDs enables rapid "on the move" specific detection of multiple intracellular miRNAs in intact cells, facilitating real-time monitoring of diverse intracellular miRNA expression, and it could pave the way for novel applications of nanomotors in biodetection.
Asunto(s)
Colorantes Fluorescentes , Grafito , MicroARNs , Puntos Cuánticos , MicroARNs/análisis , Humanos , Colorantes Fluorescentes/química , Puntos Cuánticos/química , Grafito/química , Oro/química , ADN de Cadena Simple/química , Nanocables/química , Ondas Ultrasónicas , Células A549RESUMEN
OBJECTIVES: The objective of this study was to analyze the occlusal contact characteristics of the food-impacted teeth using a new digital technique. METHODS: A 3D occlusal analysis method was developed for studying the occlusal contact characteristics of teeth affected by food impaction. In this self-controlled study, food-impacted molars from 20 participants constituted the experimental group. The corresponding healthy teeth on the opposite side served as the control group. Variables such as occlusal force (OF), occlusal contact area (OCA), and the number and distribution of occlusal contact points (OCN) in the mesio-distal directions were measured and compared between the two groups. RESULTS: There was no statistical significant difference in the values of OF, OCA and OCN between the food-impacted molars and the healthy control molars (P > 0.05). However, paired T-tests indicated significant difference in the proportion of mesial OF, OCA, and OCN in the second molars of the experimental group (0.22, 0.28 and 0.28, respectively) and the control group (0.66, 0.63, and 0.63 respectively) (P < 0.001). CONCLUSIONS: The abnormal distribution of occlusal contacts in the second molar, primarily characterized by excessive occlusal contact in the distal direction may contribute to the occurrence of food impaction. CLINICAL SIGNIFICANCE: The present study identified variations in the distribution of occlusal contacts and occlusal component force in food-impacted teeth. These findings can assist dentists in making more targeted occlusal adjustments, or applying other treatment modalities, to effectively address food impaction.
Asunto(s)
Fuerza de la Mordida , Alimentos , Diente Molar , Diente Impactado , Humanos , Femenino , Masculino , Adulto Joven , Adulto , Diente Impactado/diagnóstico por imagen , Oclusión Dental , Imagenología Tridimensional/métodosRESUMEN
BACKGROUND AND AIM: Patients with inflammatory bowel disease (IBD) often have the condition of malnutrition, which can be presented as sarcopenia, micronutrient deficiencies, etc. Trace elements (magnesium, calcium, iron, copper, zinc, plumbum and manganese) belonging to micronutrients, are greatly vital for the assessment of nutritional status in humans. Trace element deficiencies are also the main manifestation of malnutrition. Calcium (Ca) has been proved to play an important part in maintaining body homeostasis and regulating cellular function. However, there are still a lack of studies on the association between malnutrition and Ca deficiency in IBD. This research aimed to investigate the role of Ca for malnutrition in IBD patients. METHODS: We prospectively collected blood samples from 149 patients and utilized inductively coupled plasma mass spectrometry to examine their venous serum trace element concentrations. Logistic regression analyses were used to investigate the association between Ca and malnutrition. Receiver operating characteristic (ROC) curves were generated to calculate the cutoffs for determination of Ca deficiency. RESULTS: Except Ca, the concentrations of the other six trace elements presented no statistical significance between non-malnutrition and malnutrition group. In comparison with the non-malnutrition group, the serum concentration of Ca decreased in the malnutrition group (89.36 vs 87.03 mg/L, p = 0.023). With regard to ROC curve, Ca < 87.21 mg/L showed the best discriminative capability with an area of 0.624 (95% CI: 0.520, 0.727, p = 0.023). Multivariate analyses demonstrated that Ca < 87.21 mg/L (OR = 3.393, 95% CI: 1.524, 7.554, p = 0.003) and age (OR = 0.958, 95% CI: 0.926, 0.990, p = 0.011) were associated with malnutrition risk. Serum Ca levels were significantly lower in the malnutrition group than those in the non-malnutrition group among UC patients, those with severe disease state or the female group. CONCLUSIONS: In patients with IBD, Ca deficiency is an independent factor for high malnutrition risk.
Asunto(s)
Calcio , Enfermedades Inflamatorias del Intestino , Desnutrición , Humanos , Femenino , Desnutrición/sangre , Desnutrición/epidemiología , Masculino , Calcio/sangre , Enfermedades Inflamatorias del Intestino/complicaciones , Enfermedades Inflamatorias del Intestino/sangre , Adulto , Persona de Mediana Edad , Estudios Prospectivos , Oligoelementos/deficiencia , Oligoelementos/sangre , Estado Nutricional , Curva ROC , Factores de Riesgo , AncianoRESUMEN
(1) Background: Nutrients play an essential role in bone health, whether in achieving peak bone mineral density (BMD) or maintaining bone health. This study explores the relationship between nutrient supply and femoral bone health at different ages. (2) Methods: A total of 5603 participants meeting the inclusion and exclusion criteria were included in this study using the National Health and Nutrition Examination Survey (NHANES) database from 2005 to 2010, 2013 to 2014, and 2017 to 2018. Femoral bone mineral density and bone status were dependent variables, and dietary nutrient intake and nutrient intake status were independent variables. The relationship between dietary nutrient intake and bone mineral density was explored, and the importance of nutrients affecting bone status was analyzed through a neural network model. At the same time, we investigated the relationship between nutrient intake and bone status. (3) Results: The peak of age and femoral bone mineral density appeared at 20 years old in our study. After grouping by age, logistic regression analysis showed that before 20 years old, without adjusting other variables, high-fat diet was more likely to have normal bone mass than appropriate fat diet (OR: 4.173, 95%CI: 1.007-17.289). After adjusting for all demographic factors, niacin intake (OR: 1.062, 95%CI: 1.019-1.108) was beneficial for normal bone mass, while vitamin B6 intake (OR: 0.627, 95%CI: 0.408-0.965) was not. After 20 years old, after adjusting for carbohydrate, protein, vitamin B6, niacin, dietary fat, vitamin B2, and vitamin B12, vitamin B2 intake (OR: 1.153, 95%CI: 1.04-1.278) was beneficial for normal bone mass, while vitamin B6 intake (OR: 0.842, 95%CI: 0.726-0.976) was not. After adjusting for all confounding factors, vitamin B2 intake (OR: 1.288, 95%CI: 1.102-1.506) was beneficial for normal bone mass. In addition, we found that even if there was no statistical significance, the effects of high-fat diet on bone mass were different at different ages. (4) Conclusions: By conducting an in-depth analysis of the NHANES database, this study reveals that dietary factors exert divergent effects on bone health across different age groups, implying the necessity of implementing tailored dietary strategies to maintain optimal bone health at distinct life stages.
Asunto(s)
Densidad Ósea , Niacina , Humanos , Adulto Joven , Adulto , Encuestas Nutricionales , Niacina/farmacología , Dieta , Dieta Alta en Grasa , Riboflavina/farmacología , Vitaminas/farmacologíaRESUMEN
Osteoporosis caused by bone loss is one of the serious global public health problems. Folic acid is a B vitamin with multiple physiological functions such as lipid regulation and antioxidant capacity, and its potential to improve bone loss has attracted our attention. Through NHANES database analysis, we found that folic acid intake was significantly correlated with whole-body bone mineral density (BMD) in people aged 20-60 years, and the association may be mediated by the body fat rate. Male C57Bl/6 mice were fed either a normal diet or a high-fat diet, and folic acid was added to drinking water for supplementation. Our results indicated that mice with high body fat showed bone microstructure damage and bone loss, while folic acid supplementation improved bone quality. At the same time, we found that mice with high body fat exhibited abnormal blood lipids, dysregulation of intestinal flora, and metabolic disorders. Folic acid supplementation improved these phenomena. Through the network analysis of intestinal flora and metabolites, we found that LCA and TGR5 may play important roles. The results showed that folic acid promoted the expression of LCA and TGR5 in mice, increased the phosphorylation of AMPK, and decreased the phosphorylation of NF-κB and ERK, thereby reducing bone loss. In summary, folic acid intake is closely related to BMD, and folic acid supplementation can prevent high body fat-induced bone loss. Our study provides new ideas and an experimental basis for preventing bone loss and osteoporosis.
Asunto(s)
Densidad Ósea , Dieta Alta en Grasa , Suplementos Dietéticos , Ácido Fólico , Ratones Endogámicos C57BL , Osteoporosis , Receptores Acoplados a Proteínas G , Transducción de Señal , Animales , Ácido Fólico/farmacología , Ácido Fólico/administración & dosificación , Masculino , Ratones , Transducción de Señal/efectos de los fármacos , Receptores Acoplados a Proteínas G/metabolismo , Receptores Acoplados a Proteínas G/genética , Osteoporosis/prevención & control , Osteoporosis/metabolismo , Dieta Alta en Grasa/efectos adversos , Adulto , Humanos , Persona de Mediana Edad , Densidad Ósea/efectos de los fármacos , Adulto Joven , FemeninoRESUMEN
Creating tissue and organ equivalents with intricate architectures and multiscale functional feature sizes is the first step toward the reconstruction of transplantable human tissues and organs. Existing embedded ink writing approaches are limited by achievable feature sizes ranging from hundreds of microns to tens of millimeters, which hinders their ability to accurately duplicate structures found in various human tissues and organs. In this study, a multiscale embedded printing (MSEP) strategy is developed, in which a stimuli-responsive yield-stress fluid is applied to facilitate the printing process. A dynamic layer height control method is developed to print the cornea with a smooth surface on the order of microns, which can effectively overcome the layered morphology in conventional extrusion-based three-dimensional bioprinting methods. Since the support bath is sensitive to temperature change, it can be easily removed after printing by tuning the ambient temperature, which facilitates the fabrication of human eyeballs with optic nerves and aortic heart valves with overhanging leaflets on the order of a few millimeters. The thermosensitivity of the support bath also enables the reconstruction of the full-scale human heart on the order of tens of centimeters by on-demand adding support bath materials during printing. The proposed MSEP demonstrates broader printable functional feature sizes ranging from microns to centimeters, providing a viable and reliable technical solution for tissue and organ printing in the future.
Asunto(s)
Bioimpresión , Ingeniería de Tejidos , Humanos , Ingeniería de Tejidos/métodos , Córnea , Bioimpresión/métodos , Impresión Tridimensional , Andamios del Tejido/química , Hidrogeles/químicaRESUMEN
Background: Achalasia cardia (AC) is defined as a disorder of esophageal motility whose diagnostic gold standard depends on high-resolution manometry (HRM). The invasiveness of HRM can cause difficulties in diagnosis, treatment, and follow-up for patients with AC. Thus, we aimed to investigate the function of 3D reconstruction and measurement to prove the wide application of this alternative non-invasive approach for AC. Methods: A total of 126 patients with AC and 40 healthy subjects in Tianjin Medical University General Hospital from January 2018 to October 2022 were enrolled in this retrospective study. Chest CT images of these subjects were used to reconstruct the 3D models of the esophagus, stomach, spine, left crus, and right crus. Measurements of esophagus length, volume of esophagus, gastroesophageal insertion angle (His angle), max thickness of esophageal wall, esophagus maximum transverse and longitudinal diameter, esophagus-spine angle, and spine-lower esophageal sphincter (LES) angle were applied based on the models. Results: Retrocardiac esophagus length, volume of esophagus, max thickness of esophageal wall, esophagus maximum transverse and longitudinal diameter, thoracic esophagus-spine angle, and spine-LES angle in the AC group were higher than those in the control group (all P values <0.05). Among the three subtypes of AC, thoracic esophagus length, intra-abdominal LES length, volume of esophagus, His angle, esophagus maximum transverse and longitudinal diameter, and thoracic esophagus-spine angle all presented statistical differences (all P values <0.05). Correlation analysis revealed that manometric types were positively associated with His angle [r=0.196; 95% confidence interval (CI): 0.009, 0.372; P=0.028] but negatively associated with volume of esophagus (r=-0.480; 95% CI: -0.639, -0.310; P<0.001), esophagus maximum transverse diameter (r=-0.551; 95% CI: -0.679, -0.400; P<0.001), esophagus maximum longitudinal diameter (r=-0.518; 95% CI: -0.649, -0.366; P<0.001), and thoracic esophagus-spine angle (r=-0.324; 95% CI: -0.479, -0.157; P<0.001). Conclusions: This study successfully presented the differences in esophageal length, volume, thickness, and angles between healthy subjects and different AC subtypes on the basis of 3D reconstruction and measurement. Thus, 3D model and measurement can be regarded as a good support for further research and make a valuable contribution to developing non-invasive approaches for AC management.
RESUMEN
Sulfur functionalized biocarbons were prepared from naturally abundant lignin alkali with sodium thiocyanate as an activation agent and a sulfur source. The resultant biocarbon sorbents showed a high mercury isolation ability from aqueous solutions, where high surface area and doping of sulfur significantly aid the uptake of mercury, i.e., 0.05 g of biocarbon sorbent removed 99% of mercury from 250 mL of simulated wastewater with an initial concentration of mercury of 10 mg L-1.
RESUMEN
Correction for 'A poly(thymine)-templated fluorescent copper nanoparticle hydrogel-based visual and portable strategy for an organophosphorus pesticide assay' by Jihua Chen et al., Analyst, 2019, 144, 2423-2429, https://doi.org/10.1039/C9AN00017H.
RESUMEN
The immunogenicity of cemiplimab, a fully human immunoglobulin G4 monoclonal antibody directed against programmed cell death 1, was assessed in patients across multiple tumor types. The development of antidrug antibodies (ADAs) against cemiplimab was monitored using a validated bridging immunoassay. To identify ADA-positive samples in the assay, statistically determined cut points were established by analyzing baseline clinical study samples from a mixed population of different tumor types, and this validation cut point was used to assess immunogenicity in all subsequent studies. Regulatory guidance requires that ADA assay cut points be verified for appropriateness in different patient populations. Thus, for the cemiplimab ADA assay, we evaluated whether each new oncology population was comparable with the validation population used to set the cut point. Assay responses from 2393 individual serum samples from 8 different tumor types were compared with the validation population, using established statistical methods for cut-point determination and comparison, with no significant differences observed. Across tumor types, the immunogenicity of cemiplimab was low, with an overall treatment-emergent ADA incidence rate of 1.9% and 2.5% at intravenous dose regimens of 3 mg/kg every 2 weeks and 350 mg every 3 weeks, respectively. Moreover, no neutralizing antibodies to cemiplimab were detected in patients with ADA-positive samples, and there was no observed impact of cemiplimab ADAs on pharmacokinetics. Study-specific cut points may be required in some diseases, such as immune and inflammatory diseases; however, based on this analysis, in-study cut points are not required for each new oncology disease indication for cemiplimab.
Asunto(s)
Anticuerpos Monoclonales Humanizados , Neoplasias , Humanos , Incidencia , Anticuerpos Monoclonales Humanizados/uso terapéutico , Anticuerpos Monoclonales/uso terapéutico , Neoplasias/tratamiento farmacológicoRESUMEN
Background: Ovarian cancer (OV) is the highest prevalent gynecologic tumor with complicated pathogenesis; high-grade serous ovarian cystadenocarcinoma (HGSOC) is the most epidemiological and malignant subtype of OV. Keratin type I cytoskeleton 19 (KRT19) is an intermediate filament protein which plays essential roles in the maintenance of epithelial cells. However, its role in OV remains largely unknown. Methods: Bioinformatic analysis with various databases was conducted in this study. In details, KRT19 expression was assessed using databases including The Cancer Genome Atlas (TCGA), Genotype-Tissue Expression (GTEx), Gene Expression Omnibus (GEO) and Human Protein Atlas (HPA). GO-KEGG and GSEA analysis were performed by R packages. The biological function of KRT19 was analyzed based on the single-cell sequencing information from CancerSEA database. The association of KRT19 expression with immunomodulator and chemokine was predicted via the TISIDB database. Results: The expression of KRT19 was significantly upregulated in ovarian samples compared with normal controls. KRT19 expression was negatively associated with prognosis in OV, and further analysis revealed that KRT19 had promising diagnostic significance in distinguishing OV cancer from normal samples. GO-KEGG and GSEA analysis indicated that KRT19 was associated with multiple biological functions and pathways including epidermis development, apical junction, inflammatory response, and epithelial mesenchymal transition. By using different GEO series, we found that KRT19 was differentially expressed in OV-associated tissues. Furthermore, the increased KRT19 expression was positively correlated with the immune infiltration levels of the most immune cells in OV. Conclusion: This study demonstrated that KRT19 is a promising prognosis and diagnosis biomarker that determines cancer progression and is correlated with tumor immune cells infiltration in OV, suggesting being a molecular target for immunotherapies.
RESUMEN
AIMS: Programmed death-ligand 1 (PD-L1) is known to be highly expressed in various malignancies, including head and neck squamous cell carcinoma (HNSCC). We aimed to determine the prevalence of PD-L1 expression in recurrent or metastatic HNSCC (R/M HNSCC) among Chinese patients. METHODS: This multicentre, retrospective analysis of data from six centres in China included patients with R/M HNSCC treated from 9 August 2021 to 28 February 2022. PD-L1 expression in tumour tissue was assessed and represented using a combined positive score (CPS). The χ2 and Cochran-Mantel-Haenszel χ2 tests were used to compare the prevalence of different PD-L1 expression statuses according to related co-variables. RESULTS: For all 402 examined patients with R/M HNSCC, 168 cases (41.8%) had PD-L1 expression with a CPS ≥20, and 337 cases (83.8%) had PD-L1 expression with a CPS ≥1. Between the PD-L1 CPS ≥20 group and PD-L1 CPS <20 group, statistically significant differences were observed for variables of sex (p<0.001), smoking habit (p=0.0138 for non-smokers vs current smokers) and primary tumour site (p<0.001 for hypopharynx vs oral cavity and p=0.0304 for larynx vs oral cavity, respectively). CONCLUSION: PD-L1 with CPS ≥20 was expressed in about 41.8% of cases with R/M HNSCC among Chinese patients, and PD-L1 expression was significantly associated with sex, smoking history and primary tumour site. Our findings regarding the variables related to PD-L1 expression level provide insight for clinical practice and a solid basis for future research on immunotherapy in HNSCC. TRIAL REGISTRATION NUMBER: ISRCTN10570964.
RESUMEN
The inability of solid polymer electrolytes to preserve strong mechanical strength with high ionic conductivity hinders the commercialization of lithium metal batteries (LMBs). The success of fabricating layer-by-layer (LbL)-assembled electrolytes has realized the application of flexible solid polymer electrolytes in electrochemical devices. Here, we demonstrate a rational strategy to construct solid electrolytes coated with multiple ultrathin layers of polyanions (poly(sodium 4-styrenesulfonate)) and polycations (linear poly(1-butyl-3-(4-vinylbenzyl)-1H-imidazolium chloride) (BVIC)/linear poly(PEG4-VIC)/SiO2-g-poly(PEG4-VIC)) using an LbL assembly method. Poly(ionic liquid) backbones and PEG side groups are employed to facilitate the transport of lithium ions via the segmental motion of the macromolecular matrix. The fabricated free-standing membranes exhibited good ionic conductivities of 9.03-10 × 10-4 S cm-1. Furthermore, a Li/LiFePO4 cell assembled with the LbL-membrane electrolytes exhibits an initial high discharge capacity of 143-158 mAhg-1 at 60 °C with high columbic efficiency. This approach, which combines polymer synthesis and LbL self-assembly, is an effective and facile route to fabricate solid polymer electrolyte membranes with superior ionic conductivity and mechanical robustness, which are useful for electrochemical devices and high-voltage battery applications.
RESUMEN
Microcystin-LR (MC-LR) contamination is a worldwide environmental problem that poses a grave threat to the water ecosystem and public health. Exposure to MC-LR has been associated with the development of intestinal injury, but there are no effective treatments for MC-LR-induced intestinal disease. Probiotics are "live microorganisms that are beneficial to the health of the host when administered in sufficient quantities". It has been demonstrated that probiotics can prevent or treat a variety of human diseases; however, their ability to mitigate MC-LR-induced intestinal harm has not yet been investigated. The objective of this study was to determine whether probiotics can mitigate MC-LR-induced intestinal toxicity and its underlying mechanisms. We first evaluated the pathological changes in colorectal tissues using an animal model with sub-chronic exposure to low-dose MC-LR, HE staining to assess colorectal histopathologic changes, qPCR to detect the expression levels of inflammatory factors in colorectal tissues, and WB to detect the alterations on CSF1R signaling pathway proteins in colorectal tissues. Microbial sequencing analysis and screening of fecal microorganisms differential to MC-LR treatment in mice. To investigate the role of microorganisms in MC-LR-induced colorectal injury, an in vitro model of MC-LR co-treatment with microorganisms was developed. Our findings demonstrated that MC-LR treatment induced an inflammatory response in mouse colorectal tissues, promoted the expression of inflammatory factors, activated the CSF1R signaling pathway, and significantly decreased the abundance of Lactobacillus. In a model of co-treatment with MC-LR and Lactobacillus fermentum (L. fermentum), it was discovered that L. fermentum substantially reduced the incidence of the colorectal inflammatory response induced by MC-LR and inhibited the protein expression of the CSF1R signaling pathway. This is the first study to suggest that L. fermentum inhibits the CSF1R signaling pathway to reduce the incidence of MC-LR-induced colorectal inflammation. This research may provide an excellent experimental foundation for the development of strategies for the prevention and treatment of intestinal diseases in MC-LR.
Asunto(s)
Neoplasias Colorrectales , Limosilactobacillus fermentum , Humanos , Animales , Ratones , Ecosistema , Inflamación/inducido químicamenteRESUMEN
Polyzwitterions (PZs) are considered as model synthetic analogs of intrinsically disordered proteins. Based on this analogy, PZs in dilute aqueous solutions are expected to attain either globular (i.e. molten, compact) or random coil conformations. Addition of salt is expected to open these conformations. To the best of our knowledge, these hypotheses about conformations of PZs have never been verified. In this study, we test these hypotheses by studying effects of added salt [potassium bromide (KBr)] on gyration and hydrodynamic radii of poly(sulfobetaine methacrylate) in dilute aqueous solutions using dynamic light scattering and small-angle X-ray scattering, respectively. Effects of zwitteration are revealed by direct comparisons of the PZs with the polymers of the same backbone but containing (1) no explicit charges on side groups such as poly(2-dimethylaminoethyl methacrylate)s and (2) explicit cationic side groups with tertiary amino bromide pendants. Zeta-potential measurements, transmission electron microscopy, and ab initio molecular dynamics simulations reveal that the PZs acquire net positive charge in near salt-free conditions due to protonation but retain coiled conformations. Added KBr leads to nonmonotonic changes exhibiting an increase followed by a decrease in radius of gyration (and hydrodynamic radius), which are called antipolyelectrolyte and polyelectrolyte effects, respectively. Charge regulation and screening of charge-charge interactions are discussed in relation to the antipolyelectrolyte and polyelectrolyte effects, respectively, which highlight the importance of salt in affecting net charge and conformations of PZs.
RESUMEN
Background: Chinese college students used to eat in student canteens, making dietary consumption outside the cafeterias the main reason for the difference in sodium intake. This study aims to develop and validate a food frequency questionnaire (Sodium-FFQ) targeting dietary sodium intake outside the canteens among undergraduates in China. Methods: This cross-sectional study included 124 and 81 college students from comprehensive universities in the development and validation stage. A 24 h dietary recall and a food frequency questionnaire were used to develop the Sodium-FFQ. Food items were selected according to the foods that contributed more to the total sodium intake. Test-retest correlation coefficients with an interval of 14 days were employed to evaluate reproducibility. Validity was assessed against a single 24 h urine collection and a 3-day dietary record using correlation coefficients, Bland-Altman analyses, and cross-classification analysis of Kappa coefficients. Results: The Sodium-FFQ consists of 12 groups of foods with 48 items. The Spearman correlation coefficient of test-retest on sodium intake was 0.654 (p < 0.05), and that between the Sodium-FFQ, 3 × 24 h dietary record, and 24-h urinary sodium were 0.393 (p < 0.05) and 0.342 (p < 0.05), respectively. The Sodium-FFQ was correlated to 24 h urinary sodium-to-potassium ratio, with a Spearman coefficient of 0.370 (p < 0.05). The classification agreement of the Sodium-FFQ and 24 h urinary sodium was 68.4%, and the Kappa coefficient was 0.371 (p < 0.001). Conclusion: The Sodium-FFQ developed in this study presented an acceptable reproducibility, validity, and classification agreement. It indicates that the Sodium-FFQ could be a potential tool for promoting sodium restriction in college students.
RESUMEN
Stable soft tissue integration around the implant abutment attenuates pathogen penetration, protects underlying bone tissue, prevents peri-implantitis and is essential in maintaining long-term implant stability. The desire for "metal free" and "aesthetic restoration" has favored zirconia over titanium abutments, especially for implant restorations in the anterior region and for patients with thin gingival biotype. Soft tissue attachment to the zirconia abutment surface remains a challenge. A comprehensive review of advances in zirconia surface treatment (micro-design) and structural design (macro-design) affecting soft tissue attachment is presented and strategies and research directions are discussed. Soft tissue models for abutment research are described. Guidelines for development of zirconia abutment surfaces that promote soft tissue integration and evidence-based references to inform clinical choice of abutment structure and postoperative maintenance are presented.
RESUMEN
BACKGROUND: Occlusal analysis is essential in the dental clinical practice. However, the traditional occlusal analysis performed on the two-dimensional level can not directly correspond to the tooth surface with three-dimensional profile, therefore the clinical guidance value is limited. METHODS: By combining the 3D digital dental models and quantitative data from 2D occlusal contact analysis, this study constructed a novel digital occlusal analysis method. The validity and reliability of DP and SA were verified by comparing the results of occlusal analysis of 22 participants. ICC values for occlusal contact area (OCA) and occlusal contact number (OCN) were tested. RESULTS: Results confirmed the reliability of the two occlusal analysis methods with ICC values of 0.909 for SAOCA, 0.906 for DPOCA, 0.929 for SAOCN and 0.904 for DPOCN. The Bland-Altman plot, paired t-test (tOCN = 0.691, P > 0.05) and Pearson correlation analysis results (R = 0.68, p < 0.001) verified the validity between SA and DP. Then a novel digital occlusal analysis method was constructed, which not only can locate the occlusion contact and provide the quantitative analysis, but also provide a comprehensive description of the resultant force of each tooth and the component forces on the x-, y- and z-axis. CONCLUSIONS: This new occlusal analysis method can obtain quantitative analysis of occlusal contact including contact area and force information simultaneously, which will provide new impetus and greater help for clinical dental treatment and scientific research.