RESUMEN
Hydrogels, typically favored for 3D printing due to their viscoelasticity, are now trending toward ecofriendly alternatives amid growing environmental concerns. In this study, we crafted cellulose-based hydrogels, specifically employing cellulose acetate sulfate (CAS). By keeping the acetyl group substitution degree (DSacetyl = 1.8) and CAS molecular weight constant, we varied rheological properties by adjusting sulfate group substitution (DSsulfate = 0.4, 0.7, and 1.0) and CAS concentration (2-5 wt %). Rheological characterizations, including shear-thinning, yield stress, and thixotropy, were performed to identify optimal conditions for formulating CAS hydrogel ink in direct ink writing for 3D printing under selected experimental conditions. Based on rheological findings, CAS hydrogels with DSsulfate 0.7 and concentration of 4 wt % was used for 3D printing, with subsequent evaluation of printing metrics. Additionally, the effect of ionic cross-linking using Ca2+ ions on the structural integrity of 3D-printed structures was evaluated, demonstrating effective preservation through reinforced polymer networks. The shrinking and swelling behaviors of the 3D-printed structures were also significantly affected by this ionic cross-linking. Building on these findings, this work could broaden the range of cellulose derivatives available for the preparation of cellulose-based hydrogels for 3D printing.
RESUMEN
Recent rank-based attacks have reduced the security of Rainbow, which is one of the multi-layer UOV signatures, below the NIST security requirements by speeding up iterative kernel-finding operations using classical mathematics techniques. If quantum algorithms are applied to perform these iterative operations, the rank-based attacks may be more threatening to multi-layer UOV, including Rainbow. In this paper, we propose a quantum rectangular MinRank attack called the Q-rMinRank attack, the first quantum approach to key recovery attacks on multi-layer UOV signatures. Our attack is a general model applicable to multi-layer UOV signature schemes, and in this paper, we provide examples of its application to Rainbow and the Korean TTA standard, HiMQ. We design two quantum oracle circuits to find the kernel in consideration of the depth-width trade-off of quantum circuits. One is to reduce the width of the quantum circuits using qubits as a minimum, and the other is to reduce the depth using parallelization instead of using a lot of qubits. By designing quantum circuits to find kernels with fewer quantum resources and complexity by adding mathematical techniques, we achieve quadratic speedup for the MinRank attack to recover the private keys of multi-layer UOV signatures. We also estimate quantum resources for the designed quantum circuits and analyze quantum complexity based on them. The width-optimized circuit recovers the private keys of Rainbow parameter set V with only 1089 logical qubits. The depth-optimized circuit recovers the private keys of Rainbow parameter set V with a quantum complexity of 2 174 , which is lower than the complexity of 2 221 recovering the secret key of AES-192, which provides the same security level as parameter set III.
RESUMEN
This study was to enhance the nitrogen removal efficiency in the sequencing batch reactor (SBR) process by adding sulfur-based carriers. The nitrogen removal efficiency of the control group was compared with that of the experimental group through a two-series operation of SBR1 without carrier and SBR2 with the carrier under the condition of no external carbon source. A total nitrogen (T-N) removal efficiency of 6.6%, 72.6%, and 79.9% was observed in SBR1, SBR2 (5%), and (10%), respectively. The T-N removal efficiency was improved in the system with carriers, which showed an increase in the removal efficiency of approximately 91.7%. The results suggest that the inclusion of the carrier led to an elevation in the sulfur ratio, implying an augmented surface area for sulfur-based denitrifying microorganisms. Additionally, CaCO3 contributed essential alkalinity for sulfur denitrification, thereby preventing a decline in pH. Regardless of the carrier, the efficiency of organic matter removal surpassed 89%, indicating that the sulfur-based carrier did not adversely affect the biological reaction associated with organic matter. Therefore, autotrophic denitrification was successfully performed using a sulfur carrier in the SBR process without an external carbon source, improving the nitrogen removal efficiency.
Asunto(s)
Desnitrificación , Purificación del Agua , Reactores Biológicos , Azufre , Purificación del Agua/métodos , Nitrógeno , CarbonoRESUMEN
Ecofriendly multifunctional films with only biomass-based components have gathered significant interest from researchers as next-generation materials. Following this trend, a TEMPO-oxidized cellulose nanofibril (TOCNF) film containing hydrophilic lignin (CL) was fabricated. To produce the lignin, peracetic acid oxidation was carried out, leading to the introduction of carboxyl groups into the lignin structure. By adding hydrophilic lignin, various characteristics (e.g., surface smoothness, UV protection, antimicrobial activity, and barrier properties) of the TOCNF film were enhanced. In particular, the shrinkage of CNF was successfully prevented by the addition of CL, which is attributed to the lower surface roughness (Ra) from 18.93 nm to 4.99 nm. As a result, the smooth surface of the TOCNF/CL film was shown compared to neat TOCNF film and TOCNF/Kraft lignin composite film. In addition, the TOCNF/CL film showed a superior UV blocking ability of 99.9 % with high transparency of 78.4 %, which is higher than that of CNF-lignin composite films in other research. Also, water vapor transmission rate was reduced after adding CL to TOCNF film. Consequently, the developed TOCNF/CL film can be potentially utilized in various applications, such as food packaging.
Asunto(s)
Celulosa Oxidada , Nanofibras , Celulosa/química , Lignina/química , Nanofibras/química , VaporRESUMEN
In this study, the effect of chlorine, which is used as a chemical cleaning agent or disinfection agent on membrane deterioration, was analyzed under various conditions during the membrane process. Reverse osmosis (RO: ESPA2-LD and RE4040-BE) and nanofiltration (NF: NE4040-70) membranes made of polyamide (PA) thin film composite (TFC) were used for evaluation. Chlorine exposure was performed at doses ranging from 1000 ppm h to 10,000 ppm h using 10 ppm and 100 ppm, and temperatures from 10 °C to 30 °C. Raw water containing NaCl, MgSO4, and dextrose was used to compare the filtration performance after exposure to each of the conditions studied. Reduction in removal performance and enhancement in permeability were observed as chlorine exposure increased. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy and scanning electron microscope (SEM) were employed to determine the surface characteristics of the decomposed membranes. ATR-FTIR was used to compare the intensity of the peaks related to the TFC membrane. Based on the analysis, the state of membrane degradation was elucidated. SEM was used to confirm visual degradation of the membrane surface. Permeability and correlation analyses were performed on CnT as an index for determining membrane lifetime in order to investigate the power coefficient. The relative influence of the exposure concentration and time on membrane degradation was explored by comparing the power efficiency according to the exposure dose and temperature.
Asunto(s)
Cloro , Membranas Artificiales , Cloro/análisis , Temperatura , Ósmosis , Filtración/métodosRESUMEN
The growing concern for the environment has resulted in renewed interest in bio-based resources. This study aims to produce a hydrogel adsorbent from cellulose and examine its adsorption performance. In pursuit of this goal, we report a simple one-pot synthesis of cellulose acetate sulfate (CAS), followed by the formation of CAS hydrogels and their subsequent adsorption performances. The CAS includes both hydrophilic and hydrophobic functional groups, enable the formation of a single-component hydrogel through intermolecular interactions in deionized water. The thermal reversibility of CAS hydrogels makes them easily processable into various shapes. The durability of the CAS hydrogel adsorbents can be improved by introducing divalent cations (e.g., Ca2+), which create ionically crosslinked hydrogels. The ionically a crosslinked CAS hydrogel adsorbent exhibits a maximum adsorption capacity of 245 mg/g for methylene blue (MB) at 23 °C and a pH of 7. The adsorption behavior of MB on the CAS hydrogel follows both the pseudo-second-order model and the Langmuir adsorption isotherm model. Furthermore, the CAS hydrogel adsorbent maintains a 70 % removal ratio after five cycles. The simplicity of synthesis and hydrogel formation opens up new possibilities for producing and utilizing cellulose-based hydrogels as adsorbents for aqueous contaminants.
Asunto(s)
Hidrogeles , Contaminantes Químicos del Agua , Hidrogeles/química , Agua , Celulosa , Sulfatos , Adsorción , Azul de Metileno/química , Contaminantes Químicos del Agua/química , Cinética , Concentración de Iones de HidrógenoRESUMEN
PURPOSE: This study aimed to evaluate angiographic and contrast enhancement (CE) patterns on three-dimensional (3D) black blood (BB) contrast-enhanced MRI in patients with acute medulla infarction. MATERIALS AND METHODS: From January 2020 to August 2021, we retrospectively analyzed stroke 3D BB contrast-enhanced magnetic resonance imaging (MRI) and magnetic resonance angiography (MRA) findings of patients visiting the emergency room for symptom evaluation of acute medulla infarction. In total, 28 patients with acute medulla infarction were enrolled in this study. Four types of 3D BB contrast-enhanced MRI and MRA were classified as follows: 1=unilateral contrast-enhanced vertebral artery (VA)+no visualization of VA on MRA; 2=unilateral enhanced VA+hypoplastic VA; 3=no enhanced VA+unilateral complete occlusion of VA; 4=no enhanced VA+normal VA (including hypoplasia) on MRA. RESULTS: Of the 28 patients with acute medulla infarction, 7 (25.0%) showed delayed positive findings after 24 hours on diffusion-weighted imaging (DWI). Of these patients, 19 (67.9%) showed CE of the unilateral VA on 3D BB contrast-enhanced MRI (type 1 and 2). Of the 19 patients with CE of VA on 3D BB contrast-enhanced MRI, 18 showed no visualization of enhanced VA on MRA (type 1), and 1 showed hypoplastic VA. Of the 7 patients with delayed positive findings on DWI, 5 showed CE of the unilateral VA and no visualization of the enhanced VA on MRA (type 1). Symptom onset to door time or initial MR check time was significantly shorter in the groups with delayed positive findings on DWI (P<0.05). CONCLUSION: Unilateral CE on 3D BB contrast-enhanced MRI and no visualization of the VA on MRA are related to the recent occlusion of the distal VA. These findings suggest that the recent occlusion of the distal VA is related to acute medulla infarction, including delayed visualization on DWI.
RESUMEN
Lignin has different structural characteristics depending on the extraction conditions. In this study, three types of ethanol organosolv lignin (EOL) were produced under different extraction conditions involving the reaction temperature (140, 160, 180 °C), sulfuric acid concentration (0.5, 1, 1.5 %), and ethanol concentration (40, 60, 80 %) to compare the difference in properties when mixed with polylactic acid (PLA) matrix after atom transfer radical polymerization (ATRP). ATRP of EOL was conducted to improve its compatibility with PLA using methyl methacrylate (MMA) as a monomer. The molecular weight of each EOL increased significantly, and the glass transition temperature (Tg) decreased from approximately 150 to 110 °C. The EOL-g-PMMA copolymer exhibited a melting point (Tm), whereas EOL did not, implying that the thermoplasticity increased. The EOL-g-PMMA/PLA blend and film were prepared with 10 % of the copolymer in the PLA matrix. The tensile strength and strain of the blend were higher than those of unmodified organosolv lignin as the compatibility increased, and the UV transmittance was lower than that of neat PLA because of the UV protecting properties of EOL moiety.
Asunto(s)
Lignina , Poliésteres , Lignina/química , Polimerizacion , Poliésteres/química , Polímeros/química , EtanolRESUMEN
BACKGROUND: Approximately half (55%) of anti-N-methyl-D-aspartate receptor (NMDAR) encephalitis is known to show abnormal brain images, including high signal intensity in T2 or fluid attenuated inversion recovery (FLAIR) images. In a minority of anti-NMDAR encephalitis cases, high signal intensity on diffusion-weighted imaging (DWI) has been reported, a finding that is highly suggestive of a stroke. CASE PRESENTATION: We present the case of a 66-year-old man who experienced two separate focal seizure events, which involved first the right and then the left upper extremity in a short period of time. The patient showed focal clonic seizures involving right arm and hand, which sometimes evolved to bilateral tonic-clonic seizures on his first admission. Brain magnetic resonance imaging (MRI) showed high signal intensity on DWI and low signal intensity on the apparent diffusion coefficient (ADC) map of the left caudate nucleus and putamen. The patient was discharged symptom-free with anti-epileptic drugs for 2 weeks. The second admission occurred 4 days after the discharge. He exhibited a new symptom of focal clonic seizures involving left arm and hand while showing a brain lesion on the opposite side which is hyperintense on DWI image and hypointense on ADC map. The patient was eventually diagnosed with anti-NMDAR encephalitis according to the cerebrospinal fluid (CSF) antibody test. CONCLUSIONS: This is the case of anti-NMDAR encephalitis patient whose DWI/ADC images revealed sequential involvement on the left and right basal ganglia with a short time interval. When stroke-like brain lesions on DWI are found in a patient with a focal seizure, a CSF study could help rule out autoimmune encephalitis. We also suggest that DWI/ADC map images may be useful for the early detection of anti-NMDAR encephalitis.
Asunto(s)
Encefalitis Antirreceptor N-Metil-D-Aspartato , Anciano , Encefalitis Antirreceptor N-Metil-D-Aspartato/complicaciones , Encefalitis Antirreceptor N-Metil-D-Aspartato/diagnóstico por imagen , Ganglios Basales , Encéfalo , Imagen de Difusión por Resonancia Magnética , Humanos , Imagen por Resonancia Magnética , MasculinoRESUMEN
Eucalyptus pellita is known as attractive biomass, and it has been utilized for eucalyptus oil, furniture, and pulp and paper production that causes a significant amount of byproducts. Liquid hot water treatment depending on combined severity factor (CSF) was subjected to isolate hemicellulose fraction from E. pellita and to produce xylooligosaccharides (XOS). The xylan extraction ratio based on the initial xylan content of the feedstock was maximized up to 77.6% at 170 °C for 50 min condition (CSF: 1.0), which had accounted for XOS purity of 76.5% based on the total sugar content of the liquid hydrolysate. In this condition, the sum of xylobiose, xylotriose, and xylotetraose which has a low degree of polymerization (DP) of 2 to 4 was determined as 80.6% of the total XOS. The highest XOS production score established using parameters including the xylan extraction ratio, XOS purity, and low DP XOS ratio was 5.7 at CSF 1.0 condition. XOS production score evaluated using the CSF is expected to be used as a productivity indicator of XOS in the industry (R-squared value: 0.92).
RESUMEN
In general, lignin exhibits unpredictable and nonuniform thermal properties due to the structural variations caused by the extraction processes. Therefore, a systematic understanding of the correlation between the extraction conditions, structural characteristics, and properties is indispensable for the commercial utilization of lignin. In this study, the effect of extraction conditions on the structural characteristics of ethanol organosolv lignin (EOL) was investigated by response surface methodology. The structural characteristics of EOL (molecular weight, hydroxyl content, and intramolecular coupling structure) were significantly affected by the extraction conditions (temperature, sulfuric acid concentration, and ethanol concentration). In addition, the correlation between the structural characteristics and thermal properties of the extracted EOLs was estimated. The relevant correlations between the structural characteristics and thermal properties were determined. In particular, EOLs that had a low molecular weight, high phenolic hydroxyl content, and low aryl-ether linkage content exhibited prominent thermal properties in terms of their initial decomposition rate and a high glass transition temperature, T g. Correspondingly, EOL-PLA blends prepared using three EOL types exhibited improved thermal properties (starting point of thermal decomposition and maximum decomposition temperature) compared to neat PLA and had thermal decomposition behaviors coincident with the thermal properties of the constituent EOLs.
RESUMEN
This study was conducted to investigate the degradation characteristics of kraft lignin (KL) during peracetic acid (PAA) treatment, and to produce potentially valuable polymers of low molecular weight lignin by controlling the reaction conditions. For the peracetic acid treatment, acetic acid (AA) and hydrogen peroxide (HP) were directly mixed at ratios of 4:1, 1:1, and 1:4 (v/v) and employed as reaction media. After PAA treatment of kraft lignin at 80 °C, complete dissolution of the lignin and reduction in the molecular weight were observed. When the PAA reaction was performed at high HP concentration (1:4, v/v), the aromatic lignin skeleton opened and converted to a structure containing large amounts of carboxyl groups. On the other hand, the treatment at high AA concentration (4:1, v/v) decomposed lignin while maintaining its aromatic structure. Hence, we demonstrated that the selective production of lignin-derived polymers can be controlled depending on PAA and HP concentrations.
Asunto(s)
Biopolímeros/química , Lignina/química , Ácido Peracético/farmacología , Fraccionamiento Químico , Fenómenos Químicos , Modelos Químicos , Peso Molecular , Ácido Peracético/química , Solubilidad/efectos de los fármacos , Solventes/química , Análisis EspectralRESUMEN
For improving the economic efficiency of the biorefining concept, selective decomposition and separation of biomass components is indispensable. In this respect, a sequential pretreatment process consisting of liquid hot water treatment and diluted peracetic acid (PAA) treatment was proposed for total utilization of lignocellulosic woody biomass. During the liquid hot water treatment, hemicellulose can be decomposed efficiently without significant loss of cellulose and lignin, implying the possibility for xylooligomer production by thermochemical treatment. In the PAA treatment, lignin was successfully degraded and liquefied using a 50% diluted PAA solvent, suggesting the possibility of dicarboxylic acid production. After the sequential process proposed in this study, the cellulose accessibility to the enzyme could be maximized by inducing selective deconstruction of hemicellulose and lignin.
Asunto(s)
Lignina , Polisacáridos , Biomasa , HidrólisisRESUMEN
We demonstrate an array of solid-state dye-sensitized solar cells (SS-DSSCs) for a high-voltage power source based on micropatterned titanium dioxide nanoparticles (TNPs) as photoanodes connected in series. The underlying concept of patterning the TNP of a few micrometers thick lies on the combination of the lift-off process of transfer-printed patterns of a sacrificial layer and the soft-cure treatment of the TNP for fixation. This sacrificial layer approach allows for high pattern fidelity and stability, and it enables to construct stable, micrometer-thick, and contamination-free TNP patterns for developing the SS-DSSC array for miniature high-voltage applications. The array of 20 SS-DSSCs integrated in series is found to show a voltage output of around 7 V.