Polyphenol-SiO2 hybrid biosorbent for heavy metal removal. Yerba mate waste (Ilex paraguariensis) as polyphenol source: kinetics and isotherm studies.

A low-cost biosorbent hybrid material ready for application was obtained in this work. Yerba mate (Ilex paraguariensis) milling residual dust was used as a polyphenol source by ethanolic extraction. Polyphenols were immobilized within a SiO(2) matrix to form an interpenetrated polymer after glutaraldehyde cross-linking. Pb(II), Cr(III) and Cr(VI) were chosen as model metals for adsorption. The hybrid materials were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS) and Nitrogen Adsorption Isotherms. Adsorption experimental data were analysed using Langmuir, Freundlich, Dubinin-Radushkevich, Temkin, Redlich-Peterson, Sips and Toth isotherm models along with the evaluation of adsorption energy and standard free energy (ΔG°). The adsorption was observed to be pH dependent. The main mechanism of metal adsorption was found to be a spontaneous charge associated interaction. Electron Spin Resonance (ESR) spectroscopy confirmed that Cr(VI) adsorption was an adsorption-coupled reaction and the adsorbed specie was Cr(V). The hybrid matrix probed its adsorption capacity of Cr(III) in a non-treated tannery wastewater.

Proving the antimicrobial spectrum of an amphoteric surfactant-sol-gel coating: a food-borne pathogen study.

An antimicrobial coating was evaluated in this work for its antimicrobial efficacy against common food-borne pathogens. Dodecyl-di(aminoethyl)-glycine, an organic disinfectant, was immobilized in a silicon oxide matrix to generate thin films over surfaces by means of the sol-gel process. Tetraethoxysilane was used as the polymeric precursor. No alteration of optical transparency on the covered surfaces was observed. Topographic images obtained with atomic force microscopy showed a homogeneous film with no additional roughness added by the polymer to the surface. The attenuated total reflectance-Fourier transform infrared spectral data showed the presence of dodecyl-di(aminoethyl)-glycine in the silicon oxide network after a normal cleaning procedure. The antimicrobial efficacy test was performed by exposing coated slides to suspensions of common food-borne pathogens: Escherichia coli, Staphyloccocus aureus, E. coli O157:H7, Salmonella typhi, S. cholerasuiss, Listeria innocua and L. monocytogenes. The coating activity was not only bacteriostatic but also bactericidal. The percent reduction of viable microorganism exposure over 24 h to the coated surface ranged between 99.5%, for the more resistant gram-positive bacteria, and over 99.999%, for most gram-negative bacteria. The silicon matrix itself did not account for any reduction of viable microbial, even more an increase was observed.

Immobilized chitosan as biosorbent for the removal of Cd(II), Cr(III) and Cr(VI) from aqueous solutions.

The generation of layer-by-layer silicate-chitosan composite biosorbent was studied. The films were evaluated on its stability regarding the polymer leakage and its capability in the removal of Cd(II), Cr(III) and Cr(VI) from an aqueous solution. SEM, EDAX and ATR-IR techniques were applied for material characterization. Silicate-chitosan films with a final layer of silicate demonstrated chitosan retention and had better sorption capacities than those without it. For metal species, such as Cd(II) and Cr(III), the greatest adsorption was obtained when the pH of the solution was 7. When Cr(VI) was evaluated, pH 4 was the optimal for its adsorption. Langmuir and Freundlich isotherms were modeled for the equilibrium data. An 80% of the adsorbed metal was recovered by HNO(3) incubation. This non-covalent immobilization method allowed chitosan surface retention and did not affect its adsorption properties. The use of a coated surface would facilitate sorbent removal from medium after adsorption.

Antimicrobial activity on glass materials subject to disinfectant xerogel coating.

The antimicrobial compound dodecyl-di(aminoethyl)-glycine was immobilized in a silicon oxide xerogel matrix and used for glass surface coating. Coated glasses were tested for surface antimicrobial activity. The utilization of tetraethoxysilane (TEOS) as a silicon oxide polymer precursor, using the dip-coating process, allowed for the generation of transparent thin films over glass surfaces. Different concentrations of the antimicrobial compound were used to generate the coatings. The presence of dodecyl-di(aminoethyl)-glycine on coated and uncoated slides was analyzed by FT-IR spectra. Coated glass slides were exposed to suspensions of Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus for 24 h. Surface contamination was evaluated by the microbial plate count technique. When antimicrobial-coated glasses were compared with antimicrobial-free coated glasses, the former showed greater than 99% reduction of colony-forming units (cfu) for E. coli and P. aeruginosa, when 1% of antimicrobial was present in the coating solution. The same percentage of reduction for S. aureus was achieved when 1.5% of the antimicrobial was present in the coating solution. In a direct inhibition test on agar plates, no inhibitory zone was observed, indicating that the antimicrobial did not diffuse into the media.