Fixation and Permeabilization Approaches for Scanning Electrochemical Microscopy of Living Cells.

Scanning electrochemical microscopy (SECM) has been widely used for the electrochemical imaging of dynamic topographical and metabolic changes in alive adherent mammalian cells. However, extracting intracellular information by SECM is challenging, since it requires redox species to travel in and out the lipid cell membrane. Herein, we present cell fixation and permeabilization approaches as an alternative tool for visualizing cell properties by SECM. With this aim, adherent cells were analyzed in the SECM feedback mode in three different conditions: (i) alive; (ii) fixed, and (iii) fixed and permeabilized. The fixation was carried out with formaldehyde and does not damage lipid membranes. Therefore, this strategy can be used for the SECM investigation of cell topography or the passive transport of the redox mediator into the cells. Additional permeabilization of the cell membrane after fixation enables the analysis of the intracellular content through the coupling of SECM with immunoassay strategies for the detection of specific biomarkers. The latter was successfully applied as an easy and fast screening approach to detect the expression of the melanoma-associated marker tyrosinase in adherent melanoma cell lines corresponding to different cancer progression stages using the SECM substrate generation-tip collection mode. The present approach is simple, fast, and reliable and can open new ways to analyze cell cultures with electrochemically based scanning probe techniques.

Monitoring Tyrosinase Expression in Non-metastatic and Metastatic Melanoma Tissues by Scanning Electrochemical Microscopy.

Although tremendous progress has been made in the diagnosis of melanoma, the identification of different stages of malignancy in a reliable way remains challenging. Current strategies rely on optical monitoring of the concentration and spatial distribution of specific biomarkers. State-of-the-art optical methods can be affected by background-color interference and autofluorescence. We overcame these shortcomings by employing scanning electrochemical microscopy (SECM) to map the prognostic indicator tyrosinase (TyR) in non-metastatic and metastatic melanoma tissues by using soft-stylus microelectrodes. Electrochemical readout of the TyR distribution was enabled by adapting an immunochemical method. SECM can overcome the limitations of optical methods and opens unprecedented possibilities for improved diagnosis and understanding of the spatial distribution of TyR in different melanoma stages.

Inkjet Printing Meets Electrochemical Energy Conversion.

Inkjet printing is a very powerful digital and mask-less microfabrication technique that has attracted the attention of several research groups working on electrochemical energy conversion concepts. In this short review, an overview is given about recent efforts to employ inkjet printing for the search of new electrocatalyst materials and for the preparation of catalyst layers for polymer electrolyte membrane fuel cell applications. Recent approaches of the Laboratory of Physical and Analytical Electrochemistry (LEPA) at the École Polytechnique Fédérale de Lausanne for the inkjet printing of catalyst layers and membrane electrode assemblies are presented and future energy research directions of LEPA based on inkjet printing in the new Energypolis campus in the Canton of Valais are summarized.

Analytical Chemistry at the Laboratoire d'Electrochimie Physique et Analytique.

The Laboratoire d'Electrochimie Physique et Analytique (LEPA) has moved to the new Energypolis campus in Sion. This laboratory is involved in energy research in particular by studying charge transfer reactions at soft interfaces and developing interfacial redox electrocatalysis, by pioneering the concept of photo-ionic cells and by integrating redox flow batteries for the production of hydrogen at the pilot scale. Nonetheless, this laboratory has a long tradition in analytical chemistry with the development of microfabrication techniques such as laser photo-ablation, screen-printing and more recently inkjet printing for the design and fabrication of biosensors and immunosensors. As shown in the present review, the laboratory has recently pioneered new technologies for electrochemical and mass spectrometry imaging and for the screening of allergy in patients. The role of the laboratory in the Valais landscape will be to foster the collaboration with the HES to develop teaching and research in analytical chemistry as this field is a major source of employment for chemists.

Electrochemical push-pull probe: from scanning electrochemical microscopy to multimodal altering of cell microenvironment.

To understand biological processes at the cellular level, a general approach is to alter the cells' environment and to study their chemical responses. Herein, we present the implementation of an electrochemical push-pull probe, which combines a microfluidic system with a microelectrode, as a tool for locally altering the microenvironment of few adherent living cells by working in two different perturbation modes, namely electrochemical (i.e., electrochemical generation of a chemical effector compound) and microfluidic (i.e., infusion of a chemical effector compound from the pushing microchannel, while simultaneously aspirating it through the pulling channel, thereby focusing the flow between the channels). The effect of several parameters such as flow rate, working distance, and probe inclination angle on the affected area of adherently growing cells was investigated both theoretically and experimentally. As a proof of concept, localized fluorescent labeling and pH changes were purposely introduced to validate the probe as a tool for studying adherent cancer cells through the control over the chemical composition of the extracellular space with high spatiotemporal resolution. A very good agreement between experimental and simulated results showed that the electrochemical perturbation mode enables to affect precisely only a few living cells localized in a high-density cell culture.

Inkjet printed nanohydrogel coated carbon nanotubes electrodes for matrix independent sensing.

Polyacrylamide (PA) based hydrogels are used in several applications including polyacrylamide gel electrophoresis and sensing devices. Homogeneous and compact PA films can be prepared based on chemical or photopolymerization processes. However, the accurate and reproducible coating of substrates with nanohydrogel patterns is challenging due to the in situ polymerization and deposition requirements. Herein, we report an inkjet printing (IJP) concept with simultaneously performed UV photopolymerization of a specifically prepared acrylamide/N,N'-methylenebis(acrylamide) containing ink. A prepolymerization step of the hydrogel precursor molecules was implemented in the ink formulation protocol to adjust the viscosity of the ink and to enhance the rate of polymerization during printing. After the optimization of the printing parameters, a nanometer thin PA hydrogel coating with well distributed nanopores was achieved on top of a stand-alone carbon nanotubes (CNTs) pattern. Batches of fully inkjet printed PA/CNT modified electrodes were prepared that showed outstanding improvements for the electrochemical detection of antioxidants in complex matrices such as untreated orange juice and red wine samples thanks to the properties of the PA coating.

Finger probe array for topography-tolerant scanning electrochemical microscopy of extended samples.

Scanning electrochemical microscopy with soft microelectrode array probes has recently been used to enable reactivity imaging of extended areas and to compensate sample corrugation perpendicular to the scanning direction. Here, the use of a new type of microelectrode arrays is described in which each individual microelectrode can independently compensate corrugations of the sample surface. It consists of conventional Pt microelectrodes enclosed in an insulating glass sheath. The microelectrodes are individually fixed to a new holder system by magnetic forces. The concept was tested using a large 3D sample with heights up to 12 µm specially prepared by inkjet printing. The microelectrodes follow the topography in a constant working distance independently from each other while exerting low pressure on the surface.

Conductive gold nanoparticle mirrors at liquid/liquid interfaces.

Gold nanoparticle (Au NP) mirrors, which exhibit both high reflectance and electrical conductance, were self-assembled at a [heptane + 1,2-dichloroethane]/water liquid/liquid interface. The highest reflectance, as observed experimentally and confirmed by finite difference time domain calculations, occurred for Au NP films consisting of 60 nm diameter NPs and approximate monolayer surface coverage. Scanning electrochemical microscopy approach curves over the interfacial metallic NP films revealed a transition from an insulating to a conducting electrical material on reaching a surface coverage at least equivalent to the formation of a single monolayer. Reflectance and conductance transitions were interpreted as critical junctures corresponding to a surface coverage that exceeded the percolation threshold of the Au NP films at the [heptane + 1,2-dichloroethane]/water interface.

Electrochemical As(III) whole-cell based biochip sensor.

The development of a whole-cell based sensor for arsenite detection coupling biological engineering and electrochemical techniques is presented. This strategy takes advantage of the natural Escherichia coli resistance mechanism against toxic arsenic species, such as arsenite, which consists of the selective intracellular recognition of arsenite and its pumping out from the cell. A whole-cell based biosensor can be produced by coupling the intracellular recognition of arsenite to the generation of an electrochemical signal. Hereto, E. coli was equipped with a genetic circuit in which synthesis of beta-galactosidase is under control of the arsenite-derepressable arsR-promoter. The E. coli reporter strain was filled in a microchip containing 16 independent electrochemical cells (i.e. two-electrode cell), which was then employed for analysis of tap and groundwater samples. The developed arsenic-sensitive electrochemical biochip is easy to use and outperforms state-of-the-art bacterial bioreporters assays specifically in its simplicity and response time, while keeping a very good limit of detection in tap water, i.e. 0.8ppb. Additionally, a very good linear response in the ranges of concentration tested (0.94ppb to 3.75ppb, R(2)=0.9975 and 3.75 ppb to 30ppb, R(2)=0.9991) was obtained, complying perfectly with the acceptable arsenic concentration limits defined by the World Health Organization for drinking water samples (i.e. 10ppb). Therefore, the proposed assay provides a very good alternative for the portable quantification of As (III) in water as corroborated by the analysis of natural groundwater samples from Swiss mountains, which showed a very good agreement with the results obtained by atomic absorption spectroscopy.

Segmented field OFFGEL® electrophoresis.

A multielectrode setup for protein OFFGEL electrophoresis that significantly improves protein separation efficiency has been developed. Here, the electric field is applied by segments between seven electrodes connected in series to six independent power supplies. The aim of this strategy is to distribute evenly the electric field along the multiwell system, and as a consequence to enhance electrophoresis in terms of separation time, resolution, and protein collection efficiency, while minimizing the overall potential difference and therefore the Joule heating. The performances were compared to a standard two-electrode setup for OFFGEL fractionation of a protein mixture, using UV-Vis spectroscopy for quantification and MALDI-MS for identification. The electrophoretic separation process was simulated, and optimized by solving the time-dependent Nernst-Planck differential equation.