RESUMEN
The aim of this study was to evaluate the influence of different periods of pre-slaughter fasting (F1: 2 to 24 hours and F2: 48 to 72 hours) on the counts of hygiene indicator microorganisms and the presence of Salmonella spp. in carcasses of bullfrogs. Two different stages of the slaughter process were analyzed: after bleeding (A) and after the final carcasses cleaning (B). Samples from each fasting period were analyzed to count hygiene indicator microorganisms (n=30) and Salmonella spp. (n=140). For aerobic mesophilic microorganisms, the variation in fasting periods caused a reduction of 0.69 log10 CFU / g (P<0.05) in F2 when compared to F1 at point B of the slaughter. Coliforms at 35º C and Escherichia coli showed no differences (P >0.05) between the fasting analyzed periods. Considering the presence of E. coli, it was observed that F2 resulted in a reduction of 30% (P<0.05) positivity on point B. For Salmonella spp., the results showed that F2 contributed to an 11.5% reduction in the presence of this bacteria at point B. (P<0.05). Therefore, it is concluded that 48 to 72 hours of pre-slaughter fasting resulted in a positive impact on the microbiological quality of bullfrog carcasses.(AU)
O objetivo deste estudo foi avaliar a influência de diferentes períodos de jejum pré-abate (F1: duas a 24 horas e F2: 48 a 72 horas) nas contagens de micro-organismos indicadores de higiene e na presença de Salmonella spp. em carcaças de rãs-touro. Foram analisadas duas etapas do processo de abate: após a sangria (A) e após a toalete final da carcaça (B). As amostras de cada período de jejum foram utilizadas para contagem de indicadores de higiene (n = 30) e Salmonella spp. (n = 140). Para aeróbios mesófilos, a variação no tempo de jejum causou uma redução de 0,69 log10 UFC/g (P<0,05) em F2 quando comparado a F1 na etapa B do abate. Os coliformes a 35ºC e Escherichia coli não apresentaram diferenças (P>0,05) entre os dois períodos de jejum analisados. Considerando a presença de E. coli, F2 resultou em uma redução de 30% (P<0,05) de positividade na etapa B. Para Salmonella spp., os resultados mostraram que F2 contribuiu para uma redução de 11,5% na presença desse micro-organismo na etapa B. Portanto, conclui-se que 48 a 72 horas de jejum pré-abate tiveram um impacto positivo na qualidade microbiológica das carcaças de rã-touro.(AU)
Asunto(s)
Animales , Rana catesbeiana/microbiología , Salmonella/aislamiento & purificación , Higiene Alimentaria , Escherichia coli/aislamiento & purificación , Inocuidad de los Alimentos , Ayuno , Sacrificio de AnimalesRESUMEN
Hybrid organic-inorganic SBA-15 silicas functionalized with increasing amounts of amino groups were studied in this work aiming to evaluate the effects of their physico-chemical properties on CO2 capture ability. Three different amino-silane species were used: 3-aminopropyltriethoxysilane (APTS), 3-(2-aminoethyl)aminopropyltrimethoxysilane (EAPTS) and 3-[2-(2-aminoethyl)aminoethyl] aminopropyltrimethoxysilane (PAPTS). More specifically, samples were prepared by using two methods, following a post-synthesis grafting procedure and a one-pot preparation method. Experimental and computational techniques were used to study the structural and textural properties of the obtained samples and their surface species in relation to the adopted preparation method. For the most reactive samples, additional hints on the interactions of organosilane species with the silica surface were obtained by a combination of IR and SS-NMR spectroscopy, with particular emphasis on the effects of the silane chain length on the mobility of the organic species. Advanced complementary solid-state NMR techniques provided deeper information on the interactions of organosilane species with the silica surface. Finally, the amount of CO2 adsorbed was estimated by comparing the classical microcalorimetric analysis method with a new type of screening test, the Zero Length Column analysis, which is able to evaluate small amounts of samples in a very short time and the adsorption properties of the adsorbents. The reactivity of the amino-modified silica samples is deeply influenced by both the preparation route and by the type of organosilane used for the functionalization of the materials. In particular, samples prepared by the post-synthesis grafting procedure and containing higher amount of amino groups in the chain are more reactive, following the order PAPTS > EAPTS > APTS.
RESUMEN
Rose Bengal (RB), a xanthene dye, incorporated into mesostructured silica nanoparticles (MSNs) exhibits efficient singlet oxygen ((1)O2) generation when illuminated with 540 nm green light which is particularly promising for PDT applications. Several systems with different RB loadings were synthesized and fully characterized by means of spectroscopic techniques in combination with a computational study, to optimize the amount of RB in order to avoid the formation of aggregates that is detrimental for a high (1)O2 delivery.
Asunto(s)
Nanopartículas/química , Rosa Bengala/química , Dióxido de Silicio/química , Oxígeno Singlete/química , Modelos Moleculares , Estructura Molecular , Tamaño de la Partícula , Porosidad , Propiedades de SuperficieRESUMEN
In this work, the interactions of methyl tert-butyl ether (MTBE) on different dealuminated high silica zeolites were studied by means of both experimental and computational approaches. Zeolites with different textural and surface features were selected as adsorbents and the effect of their physico-chemical properties (i.e. pore size architecture and type and amount of surface OH sites) on sorption capacity were studied. High silica mordenite (MOR) and Y zeolites (both with a SiO2/Al2O3 ratio of 200) and ZSM-5 solid (SiO2/Al2O3 ratio of 500) were selected as model sorbents. By combining FTIR and SS-NMR (both (1)H and (13)C CPMAS NMR) spectroscopy it was possible to follow accurately the MTBE adsorption process on highly defective MOR characterized by a high concentration of surface SiOH groups. The adsorption process is found to occur in different steps and to involve isolated silanol sites, weakly interacting silanols, and the siloxane network of the zeolite, respectively. H-bonding and van der Waals interactions occurring between the mordenite surface and MTBE molecules were modeled by DFT calculations using a large cluster of the MOR structure where two adjacent side-pockets were fused in a large micropore to simulate a dealumination process leading to silanol groups. This is the locus where MTBE molecules are more strongly bound and stabilized. FTIR spectroscopy and gravimetric measurements allowed determination of the interaction strength and sorption capacities of all three zeolites. In the case of both Y and MOR zeolites, medium-weak H-bonding with isolated silanols (both on internal and external zeolite surfaces) and van der Waals interactions are responsible for MTBE adsorption, whereas ZSM-5, in which a negligible amount of surface silanol species is present, displays a much lower amount of adsorbed MTBE retained mainly through van der Waals interactions with zeolite siloxane network.
Asunto(s)
Éteres Metílicos/química , Dióxido de Silicio/química , Zeolitas/química , Teoría CuánticaRESUMEN
Chicken meat is an important vehicle of foodborne pathogens, such as Salmonella spp., and demands a systematic control of microbiological contamination during industrial processing. This control occurs by the adoption of quality control systems in slaughters based on the microbiological investigation on hygiene indicators and pathogens, requiring the development of fast, trustable, and precise methodologies. The objective of this study was to compare the Salmonella spp. conventional methodology to a protocol of PCR in chicken carcass surface samples. The PCR protocol was developed directly from the collected samples and from preenrichment broth before and after incubation. The obtained results were compared by chi(2) and McNemar tests (P < 0.05), and the values of concordance, sensitivity, and specificity of PCR variations were calculated considering the conventional methodology as a parameter. The obtained results indicated that although some similarities between the methodologies were observed when positive results were considered (P > 0.05), the PCR developed from preenrichment after incubation presented significant differences from all the other methodologies (P < 0.05). Wide variations were observed in the PCR performance for Salmonella spp. detection in chicken carcasses, which can be due to intrinsic factors inherent to the achievement of this food. Further studies are necessary to elucidate the applicability of the PCR as a tool for microbiological monitoring in quality control systems for chicken processing.
Asunto(s)
Pollos/microbiología , Reacción en Cadena de la Polimerasa/veterinaria , Intoxicación Alimentaria por Salmonella/prevención & control , Salmonella/aislamiento & purificación , Animales , ADN Bacteriano/química , ADN Bacteriano/genética , Límite de Detección , Carne/microbiología , Reacción en Cadena de la Polimerasa/métodos , Reproducibilidad de los Resultados , Salmonella/genética , Sensibilidad y EspecificidadRESUMEN
We present here the results of a synchrotron radiation-excited UV-photoemission investigation and density functional theory calculations on a structurally related series of organometallic free molecules: ethylferrocene (EtFC), vinylferrocene (VFC), and ethynylferrocene (EFC). This series exemplifies the electronic interactions operating when the C-C substituent group of an aromatic ring is bound to the substrate surface atoms, from a single C-C bond to the double and triple C-C bond pi systems which are still able to preserve substrate-molecule conjugation. A detailed assignment of the gas phase valence photoelectron spectra is discussed, providing new data on the electronic structure of EtFC and EFC and offering a partial reinterpretation of previous assignments on VFC. The broken symmetry of ferrocene caused by the monosubstitution has notable effects on the removal of the molecular orbital (MO) degeneracy which is found to be especially remarkable for the ferrocenelike e(1)' MOs. This effect is ascribed to the interaction between the aromatic cyclopentadyenyl ring and the substituent through sigma/pi hyperconjugation and pi-conjugation mechanisms depending on the nature of the hydrocarbon moiety and its conformational geometry. The vertical ionization energy values of the highest occupied MO for the alkylferrocene and ferrocene free molecules linearly correlate with the redox potential in acetonitrile for ferrocene and the corresponding hybrids obtained by covalently anchoring the free molecule on silicon.
Asunto(s)
Compuestos Ferrosos/química , Hidrocarburos/química , Modelos Químicos , Modelos Moleculares , Simulación por Computador , Electrones , Metalocenos , Conformación MolecularRESUMEN
The electron transfer to self-assembled molecular monolayers carrying a ferrocene (Fc) center, grafted on a flat Si(100) surface, is a recent subject of experimental investigation. We report here the density functional theory (DFT) ab initio calculation of Fc-silicon hybrid redox potentials. The systems were modeled with a slab of H-terminated Si(100) 1 x 1 and 2 x 1 surfaces: geometries were optimized using the ONIOM method, and solute-solvent interactions were included through the polarizable continuum model (PCM) method. Two new routes for Si functionalization with ethyl- (EtFC) and ethynyl-Fc (EFC) differing only in the unsaturation degree of the anchoring arm have been successfully explored, and the redox potential of the resulting hybrids has been measured by cyclic voltammetry: 0.675 and 0.851 V versus NHE for the EtFC and EFC derivatives, respectively. These values, along with the previously measured potential (0.700 V) for the mono-unsaturated derivative, vinyl-Fc, allow the relation between the unsaturation degree and the adduct redox potential to be studied. The comparison among the measured and computed potentials allows one to discriminate between different adduct isomers for the saturated species and more importantly provides strong indications that the carbon-carbon unsaturation initially present in the molecular arm used for anchoring to the surface is preserved upon addition, in contrast with the commonly accepted reaction mechanism.