[Ag(IPr)(bpy)][PF6]: brightness and darkness playing with aggregation induced phosphorescence for light-emitting electrochemical cells.

Heteroleptic silver(I) complexes have recently started to attract attention in thin-film lighting technologies as an alternative to copper(I) analogues due to the lack of flattening distortion upon excitation. However, the interpretation of their photophysical behavior is challenging going from traditional fluorescence/phosphorescence to a temperature-dependent dual emission mechanism and ligand-lock assisted thermally activated delayed fluorescence. Herein, we unveil the photoluminescence behavior of a three-coordinated Ag(I) complex with the N-heterocyclic carbene (NHC) ligand and 2,2'-bipyridine (bpy) as the N^N ligand. In contrast to its low-emissive Cu(I) complex structural analogues, a strong greenish emission was attributed to the presence of aggregates formed by π-π intermolecular interactions as revealed by the X-ray structure and aggregation induced emission (AIE) studies in solution. In addition, the temperature-dependent time-resolved spectroscopic and computational studies demonstrated that the emission mechanism is related to a phosphorescence emission mechanism of two very close lying (ΔE = 0.08 eV) excited triplet states, exhibiting a similar delocalized nature over the bipyridine ligands. Unfortunately, this favourable AIE is lost upon forming homogeneous thin films suitable for lighting devices. Though the films showed very poor emission, the electrochemical stability under device operation conditions is remarkable compared to the prior-art, highlighting the potential of [Ag(NHC)(N^N)][X] complexes in thin-film lighting.

Intramolecular singlet fission: Quantum dynamical simulations including the effect of the laser field.

In the previous work [Reddy et al., J. Chem. Phys. 151, 044307 (2019)], we have analyzed the dynamics of the intramolecular singlet fission process in a series of prototypical pentacene-based dimers, where the pentacene monomers are covalently bonded to a phenylene linker in ortho, meta, and para positions. The results obtained were qualitatively consistent with the experimental data available, showing an ultrafast population of the multiexcitonic state that mainly takes place via a mediated (superexchange-like) mechanism involving charge transfer and doubly excited states. Our results also highlighted the instrumental role of molecular vibrations in the process as a sizable population of the multiexcitonic state could only be obtained through vibronic coupling. Here, we extend these studies and investigate the effect of the laser field on the dynamics of intramolecular singlet fission by explicitly including the coupling to the laser field in our model. In this manner, and by selectively tuning the laser field to the different low-lying absorption bands of the systems investigated, we analyze the wavelength dependence of the intramolecular singlet fission process. In addition, we have also analyzed how the nature of the initially photoexcited electronic state (either localized or delocalized) affects its dynamics. Altogether, our results provide new insights into the design of intramolecular singlet fission-active molecules.

Parallel versus Twisted Pentacenes: Conformational Impact on Singlet Fission.

We placed two pentacene chromophores at the termini of a diacetylene linker to investigate the impact of excitation wavelength, conformational flexibility, and vibronic coupling on singlet fission. Photoexcitation of the low-energy absorption results in a superposed mixture of states, which transform on an ultrafast time-scale into a spin-correlated and vibronically coupled/hot delocalized triplet pair 1(T1T1)deloc. Regardless of temperature, the lifetime for 1(T1T1)deloc is less than 2 ps. In contrast, photoexcitation of the high-energy absorption results in the formation of 1(T1T1)deloc lasting 1.0 ps, which then decays at room temperature within 4 ps via triplet-triplet annihilation. Lowering the temperature enables 1(T1T1)deloc to delocalize and vibronically decouple, in turn affording 1(T1T1)loc. In addition, our results suggest that the quasi-free rotation at the diacetylene spacer may lead to twisted conformations with very low SF quantum yields, highlighting the need of controlling this structural aspect in the design of new singlet fission active molecules.

Long-living and highly efficient bio-hybrid light-emitting diodes with zero-thermal-quenching biophosphors.

Bio-hybrid light-emitting diodes (Bio-HLEDs) based on color down-converting filters with fluorescent proteins (FPs) have achieved moderate efficiencies (50 lm/W) and stabilities (300 h) due to both thermal- and photo-degradation. Here, we present a significant enhancement in efficiency (~130 lm/W) and stability (>150 days) using a zero-thermal-quenching bio-phosphor design. This is achieved shielding the FP surface with a hydrophilic polymer allowing their homogenous integration into the network of a light-guiding and hydrophobic host polymer. We rationalize how the control of the mechanical and optical features of this bio-phosphor is paramount towards highly stable and efficient Bio-HLEDs, regardless of the operation conditions. This is validated by the relationships between the stiffness of the FP-polymer phosphor and the maximum temperature reached under device operation as well as the transmittance of the filters and device efficiency.

Quantum dynamical simulation of intramolecular singlet fission in covalently coupled pentacene dimers.

We analyze the dynamics of intramolecular singlet fission in a series of pentacene-based dimers consisting of two pentacene-like chromophores covalently bonded to a phenylene linker in ortho, meta, and para positions. The study uses a quantum dynamical approach that employs a model vibronic Hamiltonian whose parameters are obtained using multireference perturbation theory methods. The results highlight the different role of the direct and mediated mechanism in these systems, showing that the population of the multiexcitonic state, corresponding to the first step of the intramolecular singlet fission process, occurs mainly through a superexchange-like mechanism involving doubly excited or charge transfer states that participate in the process in a virtual way. In addition, the systems investigated provide insight into the roles that built-in geometrical constraints and the electronic structure of the spacer play in the intramolecular singlet fission process.

Intramolecular Singlet Fission: Insights from Quantum Dynamical Simulations.

We investigate the dynamics of intramolecular singlet fission in a dimer consisting of two pentacene-based chromophores covalently bonded to a phenylene spacer using an approach that combines high-level ab initio multireference perturbation theory methods and quantum dynamical simulations. The results show that the population of the multiexcitonic state, corresponding to the first step of singlet fission, is facilitated by the existence of higher-lying doubly excited and charge transfer states that participate in a superexchange-like way. The important role played by high-frequency ring-breathing molecular vibrations in the process is also discussed.

Single-Component Biohybrid Light-Emitting Diodes Using a White-Emitting Fused Protein.

This work presents a pioneering multidisciplinary approach toward enhancing biohybrid light-emitting diodes (BioHLEDs), merging synthetic biology tools, polymer chemistry, and device engineering to design a thin color down-converting coating with a single white-emitting fluorescent protein (WFP). In particular, the WFP consists of fused red-, green-, and blue-emitting FPs following the so-called protein superglue approach. This WFP shows an efficient and stable white emission originated from a Förster resonance energy transfer between FP moieties. The emission chromaticity is, in addition, easily controlled by the rigidity of the polymer matrix of the coating, reaching photoluminescence quantum yields of 26% that stand out among intrinsic white-emitting materials. The WFP single-component color down-converting packaging was applied to fabricate BioHLEDs featuring efficient neutral white emission that is stable over 400 h. This represents the most stable BioHLED reported to date. Thus, this work is a landmark for the use of synthetic biology tools to design tailored luminescent biomaterials for lighting applications.

New Materials and Approaches for Advanced Optoelectronics.

An optoelectronic odyssey: ChemPlusChem presents its special issue on "New Materials and Approaches for Advanced Optoelectronics", guest-edited by Pedro Coto and Rubén Costa. This issue features top-quality contributions covering new blue-emitting coordination complexes, perovskites, nanocarbon-based hybrids, metal-organic frameworks, hybrid metal oxides, and small molecules.

When Fluorescent Proteins Meet White Light-Emitting Diodes.

Over the last decades, fluorescent proteins (FPs) have been extensively employed for imaging and tracing in cell biology and medicine. However, their application for lighting devices like light-emitting diodes (LEDs) and lasers has recently started. The interest of FPs is the result of their good photoluminescence features (high emission efficiency with a narrow spectrum and a high photon-flux saturation), good photostability, sustainable production by bacteria, and eco-friendly recycling. Their low stability at high temperatures as well as the need for an aqueous environment have, however, strongly limited their use in optoelectronics. This has recently been circumvented with new coating systems that are paving the way for the entrance of FPs into the LED field. In this Minireview, we summarize the first steps taken by a few groups towards the development of bio-hybrid white LEDs (Bio-HWLEDs) with a focus on using FPs as color down-converters, highlighting the state of the art and challenges associated with this emerging field.

Unified model for singlet fission within a non-conjugated covalent pentacene dimer.

When molecular dimers, crystalline films or molecular aggregates absorb a photon to produce a singlet exciton, spin-allowed singlet fission may produce two triplet excitons that can be used to generate two electron-hole pairs, leading to a predicted ∼50% enhancement in maximum solar cell performance. The singlet fission mechanism is still not well understood. Here we report on the use of time-resolved optical and electron paramagnetic resonance spectroscopy to probe singlet fission in a pentacene dimer linked by a non-conjugated spacer. We observe the key intermediates in the singlet fission process, including the formation and decay of a quintet state that precedes formation of the pentacene triplet excitons. Using these combined data, we develop a single kinetic model that describes the data over seven temporal orders of magnitude both at room and cryogenic temperatures.

Charge transport in C60-based single-molecule junctions with graphene electrodes.

We investigate charge transport in C60-based single-molecule junctions with graphene electrodes employing a combination of density functional theory (DFT) electronic structure calculations and Landauer transport theory. In particular, the dependence of the transport properties on the conformation of the molecular bridge and the type of termination of the graphene electrodes is investigated. Furthermore, electron pathways through the junctions are analyzed using the theory of local currents. The results reveal, in agreement with previous experiments, a pronounced dependence of the transport properties on the bias polarity, which is rationalized in terms of the electronic structure of the molecule. It is also shown that the edge states of zigzag-terminated graphene induce additional transport channels, which dominate transport at low voltages. The importance of the edge states for transport depends profoundly on the interface geometry of the junctions.

Cunning metal core: efficiency/stability dilemma in metallated porphyrin based light-emitting electrochemical cells.

The syntheses, photophysical/electrochemical characterizations of different metallated porphyrins -i.e., Zn(2+), Pt(2+), Pd(2+), and Sn(4+) porphyrins - as well as their first application in light-emitting electrochemical cells are provided. A direct comparison demonstrates that depending on the metallation either efficient (Pt-por) or stable (Zn-por) devices are achieved, demonstrating that the choice of the metal core is a key aspect for future developments.

Solution-based intramolecular singlet fission in cross-conjugated pentacene dimers.

We show unambiguous and compelling evidence by means of pump-probe experiments, which are complemented by calculations using ab initio multireference perturbation theory, for intramolecular singlet fission (SF) within two synthetically tailored pentacene dimers with cross-conjugation, namely XC1 and XC2. The two pentacene dimers differ in terms of electronic interactions as evidenced by perturbation of the ground state absorption spectra stemming from stronger through-bond contributions in XC1 as confirmed by theory. Multiwavelength analysis, on one hand, and global analysis, on the other hand, confirm that the rapid singlet excited state decay and triplet excited state growth relate to SF. SF rate constants and quantum yields increase with solvent polarity. For example, XC2 reveals triplet quantum yields and rate constants as high as 162 ± 10% and (0.7 ± 0.1) × 10(12) s(-1), respectively, in room temperature solutions.

Low-lying electronic excited states of pentacene oligomers: a comparative electronic structure study in the context of singlet fission.

The lowest-lying electronic excited states of pentacene and its oligomers are investigated using accurate multireference wave function methods (CASPT2/CASSCF) and the many-body Greens's function approach (GW/BSE). The results obtained for dimers and trimers of different geometry reveal a complex electronic structure, which includes locally excited, charge transfer, and multiexciton states. For singlets of single-excitation character, both approaches yield excitation energies that are in good overall quantitative agreement. While the multiexciton states are located relatively high in energy in all systems investigated, charge transfer states exist in close proximity to the lowest-lying absorbing states. The implications of the results for the mechanisms of singlet fission in pentacene are discussed.

Bioinspired Hybrid White Light-Emitting Diodes.

The first bioinspired hybrid white-light-emitting diodes (bio-HLEDs) featuring protein cascade coatings are presented. For easy fabrication a new strategy to stabilize proteins in rubber-like material was developed. The synergy between the excellent features of fluorescent proteins and the easily processed rubber produces bio-HLEDs with less than 10% loss in luminous efficiency over 100 hours.

Single-molecule junctions with epitaxial graphene nanoelectrodes.

On the way to ultraflat single-molecule junctions with transparent electrodes, we present a fabrication scheme based on epitaxial graphene nanoelectrodes. As a suitable molecule, we identified a molecular wire with fullerene anchor groups. With these two components, stable electrical characteristics could be recorded. Electrical measurements show that single-molecule junctions with graphene and with gold electrodes display a striking agreement. This motivated a hypothesis that the differential conductance spectra are rather insensitive to the electrode material. It is further corroborated by the assignment of asymmetries and spectral features to internal molecular degrees of freedom. The demonstrated open-access graphene electrodes and the electrode-insensitive molecules provide a model system that will allow for a thorough investigation of an individual single-molecule contact with additional probes.

Singlet fission in pentacene dimers.

Singlet fission (SF) has the potential to supersede the traditional solar energy conversion scheme by means of boosting the photon-to-current conversion efficiencies beyond the 30% Shockley-Queisser limit. Here, we show unambiguous and compelling evidence for unprecedented intramolecular SF within regioisomeric pentacene dimers in room-temperature solutions, with observed triplet quantum yields reaching as high as 156 ± 5%. Whereas previous studies have shown that the collision of a photoexcited chromophore with a ground-state chromophore can give rise to SF, here we demonstrate that the proximity and sufficient coupling through bond or space in pentacene dimers is enough to induce intramolecular SF where two triplets are generated on one molecule.

A theoretical study of the intramolecular charge transfer in 4-(dimethylamino)benzethyne.

We have investigated the non-adiabatic relaxation processes occurring in the singlet manifold of 4-(dimethylamino)benzethyne (DMABE), a molecule isoelectronic with 4-(dimethylamino)benzonitrile (DMABN) but lacking its characteristic dual fluorescence, using multireference perturbation theory methods. The results obtained point out to the existence of a two-fold decay mechanism in which the population of the initially accessed La state bifurcates towards a locally excited (LE) and a πσ* state. Further relaxation to an emitting intramolecular charge transfer (ICT) state is impeded due to the presence of pronounced energy barriers along their associated potential energy surfaces. These results provide further evidence of the role of πσ* states in the non-adiabatic relaxation processes of dialkylaminobenzonitriles.

Switching the conductance of a molecular junction using a proton transfer reaction.

A novel mechanism for switching a molecular junction based on a proton transfer reaction triggered by an external electrostatic field is proposed. As a specific example to demonstrate the feasibility of the mechanism, the tautomers [2,5-(4-hydroxypyridine)] and {2,5-[4(1H)-pyridone]} are considered. Employing a combination of first-principles electronic structure calculations and Landauer transport theory, we show that both tautomers exhibit very different conductance properties and realize the "on" and "off" states of a molecular switch. Moreover, we provide a proof of principle that both forms can be reversibly converted into each other using an external electrostatic field.

Synthesis and photophysics of novel biocompatible fluorescent oxocines and azocines in aqueous solution.

The spectroscopic properties in water solution of the different prototropic forms of the strongly fluorescent hemiacetal 4,9-dihydroxy-1,2-dihydro-4,11a-methanooxocino[4,5-b]benzofuran-5(4H)-one (1a, monardine), the aza analogue 4,9-dihydroxy-3,4-dihydro-1H-4,11a-methanobenzofuro[2,3-d]azocin-5(2H)-one (2a, azamonardine) and the respective 2-carboxyl derivatives (1b, 2b) have been studied by experimental and quantum-chemical methods. Monardine and carboxymonardine are the major products of new fluorogenic, room-temperature reactions of hydroxytyrosol or salvianic acid in aqueous solution, respectively, and present unique photophysical properties. Near neutral pH (pKa = 7.2) monardine switches from a weakly emitting, UV-absorbing (382 nm) neutral species to a VIS-absorbing (426 nm), blue emitting (464 nm) anion form, with a fluorescence quantum yield ϕF = 1 and single-exponential decay τF = 2.74 ns. This binary-like spectroscopic change from the neutral to the anionic form was interpreted based on time-dependent density functional theory (TDDFT) calculations as due to (i) the reversal of (n,π*) and (π,π*) lowest-lying singlet excited states, and (ii) a change in the triplet-state distribution accompanying monardine ionization which may abolish de-excitation via intersystem crossing. A similar fluorogenic reaction takes place with catecholamines such as dopamine and DOPA, to yield fluorescent azocines 2a and 2b which, depending on pH, may be present as cationic, neutral or anionic species. TDDFT computations of these forms were also carried out to assign the corresponding excitation transitions and emission properties. Besides the analytical interest of the fluorogenic reactions, the photochemical stability and biocompatibility of the bright-dark pH-controlled molecular switches 1a and 1b may facilitate novel labels and probes to be developed for superresolution fluorescence microscopy.