RESUMEN
In medical imaging, clinicians, researchers and technicians have begun to use 3D printing to create specialized phantoms to replace commercial ones due to their customizable and iterative nature. Presented here is the design of a 3D printed open source, reusable magnetic resonance imaging (MRI) phantom, capable of flood-filling, with removable samples for measurements of contrast agent solutions and reference standards, and for use in evaluating acquisition techniques and image reconstruction performance. The phantom was designed using SolidWorks, a computer-aided design software package. The phantom consists of custom and off-the-shelf parts and incorporates an air hole and Luer Lock system to aid in flood filling, a marker for orientation of samples in the filled mode and bolt and tube holes for assembly. The cost of construction for all materials is under $90. All design files are open-source and available for download. To demonstrate utility, B0 field mapping was performed using a series of gadolinium concentrations in both the unfilled and flood-filled mode. An excellent linear agreement (R2>0.998) was observed between measured relaxation rates (R1/R2) and gadolinium concentration. The phantom provides a reliable setup to test data acquisition and reconstruction methods and verify physical alignment in alternative nuclei MRI techniques (e.g. carbon-13 and fluorine-19 MRI). A cost-effective, open-source MRI phantom design for repeated quantitative measurement of contrast agents and reference standards in preclinical research is presented. Specifically, the work is an example of how the emerging technology of 3D printing improves flexibility and access for custom phantom design.
RESUMEN
The cylindrical meniscus is a liquid/gas interface of circular-cap cross-section constrained along its axis and bounded by end-planes. The inviscid motions of coupled cylindrical menisci are studied here. Motions result from the competition between inertia and surface tension forces. Restriction to shapes that are of circular-cap cross-section leads to an ordinary differential equation (ode) model, with the advantage that finite-amplitude stability can be examined. The second-order nonlinear ode model has a Hamiltonian structure, showing dynamical behavior like the Duffing-oscillator. The energy landscape has either a single- or double-welled potential depending on the extent of volume overfill. Total liquid volume is a bifurcation parameter, as in the corresponding problem for coupled spherical-cap droplets. Unlike the spherical-cap problem, however, axial disturbances can also destabilize, depending on overfill. For large volumes, previously known axial stability results are applied to find the limit at which axial symmetry is lost and comparison is made to the Plateau-Rayleigh limit.
RESUMEN
The combination of large-acceptance high-resolution X-ray optics with bright synchrotron sources permits quantitative analysis of rare events such as X-ray fluorescence from very dilute systems, weak fluorescence transitions or X-ray Raman scattering. Transition-metal Kbeta fluorescence contains information about spin and oxidation state; examples of the characterization of the Mn oxidation states in the oxygen-evolving complex of photosystem II and Mn-consuming spores from the marine bacillus SG- are presented. Weaker features of the Kbeta spectrum resulting from valence-level and 'interatomic' ligand to metal transitions contain detailed information on the ligand- atom type, distance and orientation. Applications of this spectral region to characterize the local structure of model compounds are presented. X-ray Raman scattering (XRS) is an extremely rare event, but also represents a unique technique to obtain bulk-sensitive low-energy (<600 eV) X-ray absorption fine structure (XAFS) spectra using hard (approximately 10 keV) X-rays. A photon is inelastically scattered, losing part of its energy to promote an electron into an unoccupied level. In many cases, the cross section is proportional to that of the corresponding absorption process yielding the same X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) features. XRS finds application for systems that defy XAFS analysis at low energies, e.g. liquids or highly concentrated complex systems, reactive compounds and samples under extreme conditions (pressure, temperature). Recent results are discussed.
Asunto(s)
Espectrometría por Rayos X/métodos , Bacillus/metabolismo , Ciclotrones , Manganeso/metabolismo , Fotones , Proteínas del Complejo del Centro de Reacción Fotosintética/química , Complejo de Proteína del Fotosistema II , Dispersión de Radiación , Espectrometría de Fluorescencia/métodos , Espectrometría Raman/métodos , Esporas Bacterianas/metabolismo , Rayos XRESUMEN
Ceftiofur sodium, a new broad-spectrum cephalosporin, has been approved in the US, Canada, and several other countries throughout the world to treat bovine respiratory disease in cattle and dairy cows. In Experiment 1, 6 lactating cows were intramuscularly treated with 2.29 mg of [14C]ceftiofur/kg of BW daily for 5 d. In Experiment 2, 30 additional cows at three locations were similarly treated with 2.2 mg of ceftiofur (unlabeled)/kg of BW. Milk was collected every 12 and 24 h after each dose and every 12 h up to 5 d after the last dose. The majority of milk samples, both during treatment (12 and 24 h after each dose) and after the last dose (up to 5 d following ceftiofur treatment), were negative by screening procedures based on microbial inhibition (Delvotest-P, Bacillus stearothermophilus disk assay, and cylinder plate assays). The receptor-binding Charm Test II assay, which has a limit of detection of .005 ppm of ceftiofur, gave positive tests for milk samples up to 48 h following treatment. When the Charm Test II assay is used with .008 IU/ml of penicillin as a positive control, 44% of the samples from individual cows were negative at 12 h posttreatment. Ninety percent of the samples from individual cows were negative at 24 h after the last treatment. The use of ceftiofur in dairy cattle in accordance with the label directions does not result in total residues in milk higher than the FDA-calculated safe concentration of 1-ppm ceftiofur equivalents. The milk from individual cows did not test positive by the commercial screening assays examined in this study, except for the Charm Test II. The Charm Test II was 90% negative using the Charm Sciences criteria at 24 h after the last treatment.
Asunto(s)
Bovinos/metabolismo , Cefalosporinas/farmacocinética , Residuos de Medicamentos/análisis , Lactancia/metabolismo , Leche/análisis , Animales , Bovinos/fisiología , Cefalosporinas/administración & dosificación , Cefalosporinas/análisis , Cromatografía Líquida de Alta Presión , Femenino , Inyecciones Intramusculares/veterinariaRESUMEN
A liquid chromatographic (LC) method has been developed for the determination of the desfuroylceftiofur metabolite of ceftiofur as a residue in the plasma of animals. Plasma sample in 0.1M pH 8.7 phosphate buffer containing dithioerythritol is incubated under nitrogen for 15 min at 50 degrees C. The sample is centrifuged, charged to a C18 cartridge, and washed with 0.1M ammonium acetate. The desfuroylceftiofur residue on the cartridge is derivatized by adding 0.1M ammonium acetate containing iodoacetamide and letting the cartridge stand in the dark for 30 min. The cartridge is then drained and rinsed, and the desfuroylceftiofur acetamide is eluted with methanol. The mixture is evaporated to dryness, dissolved in pH 10.6 sodium hydroxide, and charged to a SAX cartridge. The derivative is eluted with 2% acetic acid, reduced in volume, and dissolved in mobile phase for liquid chromatography. The LC system includes a C8 column and guard cartridge with UV detection at 254 nm. The gradient mobile phase (flow rate 1 mL/min) is 0.01M pH 5 ammonium acetate programmed to 29% methanol-water (60 + 40) in 25 min. Recoveries were 90-100% with a sensitivity of 0.1 ppm or less. The procedure has been applied to the plasma of cattle, rats, horses, pigs, and dogs.
Asunto(s)
Antibacterianos/sangre , Cefalosporinas/sangre , Residuos de Medicamentos/análisis , Animales , Bovinos , Cefalosporinas/metabolismo , Fenómenos Químicos , Química , Cromatografía Liquida , Femenino , Indicadores y Reactivos , Oxidación-Reducción , Solventes , Espectrofotometría UltravioletaRESUMEN
A high pressure liquid chromatographic (HPLC) method has been developed for determination of sulfamethazine residues in pork liver, kidney, muscle, and fat. The sample was extracted with acetone-chloroform, concentrated in the presence of dilute HCl, and partitioned between dilute HCl and hexane. The acid solution was washed with methylene chloride and then buffered with trisodium citrate and sodium hydroxide to pH 5.8-5.9. Sulfamethazine was extracted from the aqueous mixture with methylene chloride, concentrated, dissolved in buffer, and eluted from XAD-2 resin with methanol. Sulfamethazine was reliably quantitated at 0.1 ppm by HPLC on a Zorbax ODS column with detection at 254 nm with no interference from tissues or reagents. The average recovery from the edible tissues, i.e., liver, muscle, kidney, and fat, fortified at 0.1-0.4 ppm was 85.6 +/- 3.7%.
Asunto(s)
Carne/análisis , Sulfametazina/análisis , Tejido Adiposo/análisis , Animales , Cromatografía Líquida de Alta Presión/métodos , Riñón/análisis , Hígado/análisis , Músculos/análisis , PorcinosRESUMEN
Seven laboratories collaboratively studied a method for the assay of melengestrol acetate at the 0, 10, and 20 ppb levels in bovine fat, liver, muscle, and kidney. The study included fortification of tissue by each laboratory and analysis of fat samples taken from treated heifers which had endogenous levels of 0, 10, and 20 ppb melengestrol acetate. The multistep cleanup procedure used included extraction, solvent partition, column chromatography, and electron capture gas-liquid chromatographic, determination. Results of the study for muscle, liver, kidney, and fat showed that the method gave satisfactory recoveries and accuracy. In fat, the most critical tissue, recovery was greater than 93%. A statistical comparison of the results reported for fat tissue from treated heifers demonstrated that 5 of the 7 laboratories obtained similar results. The results produced by the method can be expected to be repeatable within and among laboratories. On the basis of the collaborative results the method has been adopted as official first action.