RESUMEN
In this work the ability of Zn2-xCuxCr-CO3 layered double hydroxides (LDHs) as highly efficient DeNOx photocatalysts was studied. LDHs with x = 0, 0.2 and 0.4 were prepared using a coprecipitation method. The samples were characterized by different techniques such as XRD, XPS, FT-IR, ICP-MS, TG, SBET, SEM and Diffuse reflectance (DR). The increased amount of copper ions in the LDH layers gave rise to slight changes in the structure and morphology and an important variation of the optical properties of the LDHs. The prepared ZnCuCr-CO3 photocatalysts exhibited favourable conversion efficiency (51%) and an extraordinary selectivity (97%) for the photochemical NO abatement. The photochemical mechanism was elucidated from DOS, EPR, Femtosecond transient absorption and in-situ DRIFTS studies. The results suggested that the presence of Cu2+ ions in the LDH framework introduced new states in the valence band states, thus favouring the production and mobility of e-/h+ charge carriers and a greater production of â O2- and â OH.
Asunto(s)
Cobre , Hidróxidos , Espectroscopía Infrarroja por Transformada de Fourier , ZincRESUMEN
A parallel study of acidic and alkaline leaching for the recovery of Mn and Zn from spent alkaline batteries is outlined. Using H2SO4 as solvent and selecting appropriate conditions of temperature and concentration, all residues were dissolved except carbon. The separation and recovery of the two components were performed by electrodeposition with satisfactory results at pH values above 4 (current efficiency above 70% for Zn and Mn) but rather lower efficiencies as the pH decreased. Most of the Zn was selectively dissolved by alkaline leaching using a 6.5M NaOH solution, and its recovery was examined by means of both electrochemical and chemical processes. The expected formation of pure Zn by electrowinning failed due to the formation of ZnO, the content of which was highly dependent on the electrodeposition time. For short periods, Zn was the main component. For longer periods the electrodeposit consisted of agglomerated microparticles of ZnO with a minor fraction of Zn metal (barely 3% as measured by X-ray diffraction). A chemical reaction of the element with oxygen released at the anode surface might be responsible for its conversion to ZnO. A simple chemical route is described for the first time for the direct conversion of Zn(OH)42- solution to nanostructured ZnO by lowering the pH to values around 12 using 2M HCl solution.
Asunto(s)
Suministros de Energía Eléctrica , Manganeso , Zinc , Ácidos , Electrodos , Reciclaje , Difracción de Rayos XRESUMEN
The presence of NO9x) gases (NO+NO2) in the atmosphere is a major concern of society because of their associated adverse and harmful effects. In order to remove the NO(x) gases from the air, photocatalysis arises as an innovative and promising technique. Through the use of photochemical oxidation processes the NO and NO2 gases are oxidised to NO3- form and thus removed from the air. In recent years new nanomaterials are being developed by researchers with the aim to enhance their photocatalytic activity to combat the NO(x) pollution. The main focus is devoted to preparing new TiO2 based compounds with the highest specific surface area (SSA), different morphology and chemical modifications. In order to increase the SSA, different substrates were used to disperse the TiO2 nanoparticles: organic and carbon fibres, mesoporous materials, clays composites and nanoporous microparticles. In the other hand, high photocatalytic performances were obtained with nanotubes, self-orderer nano-tubular films and nanoparticles with the lowest size. Conversely, when TiO2 is doped with ions the oxide exhibited a better photocatalytic performance under visible light, which is related to the creation of intermediate energy states between the conduction band and the valence band. Alternatively, visible light photocatalysts different from titanium oxide have been studied, which exhibit a good De-NO(x) efficiency working under λ > 400 nm visible light irradiation.
Asunto(s)
Contaminantes Atmosféricos , Restauración y Remediación Ambiental , Nanoestructuras , Óxidos de Nitrógeno , Contaminantes Atmosféricos/análisis , Contaminantes Atmosféricos/química , Contaminantes Atmosféricos/aislamiento & purificación , Óxidos de Nitrógeno/análisis , Óxidos de Nitrógeno/química , Óxidos de Nitrógeno/aislamiento & purificación , Oxidación-Reducción , Fotólisis , TitanioRESUMEN
CuxO-TiO2 (x = 1, 2) nanomaterials are synthesized on polycrystalline Ti substrates by a convenient chemical vapor deposition (CVD) approach, based on the initial growth of a CuxO matrix (at 400 and 550 °C for x = 1 and 2, respectively) and the subsequent overdispersion of TiO2 at 400 °C. All CVD processes are carried out in an oxygen atmosphere saturated with water vapor. The obtained systems are investigated by means of glancing incidence X-ray diffraction (GIXRD), X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), field emission-scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), and electrochemical experiments. Galvanostatic charge/discharge measurements indicate that Cu2O-TiO2 nanomaterials exhibit very attractive high-rate capabilities (â¼400 mA h g(-1) at 1 C; â¼325 mA h g(-1) at 2 C) and good stability after 50 operating cycles, with a retention of 80% of the initial capacity. This phenomenon is mainly due to the presence of TiO2 acting as a buffer material, i.e., minimizing volume changes occurring in the electrochemical conversion. In a different way, CuO-TiO2 systems exhibit worse electrochemical performances as a consequence of their porous morphology and higher thickness. In both cases, the obtained values are among the best ever reported for CuxO-based systems, candidating the present nanomaterials as extremely promising anodes for eventual applications in thin film lithium batteries.