Surgical outcomes of cable plate fixation in treatment of Vancouver type B1 and type C periprosthetic femoral fractures: a retrospective case series.

This study aimed to investigate the mid-to-long-term surgical outcomes of open reduction and internal fixation (ORIF) using a hybrid locking plate/cable technique for the treatment of Vancouver type B1 and type C periprosthetic femoral fractures (PPFs) in a consecutive group of patients from a single tertiary referral center. Twenty-five patients (25 PPFs; 17 female, 8 male) in whom a Vancouver type B1 or type C PPF was diagnosed and treated by a hybrid locking plate/cable technique from 2005 to 2016 were included in the study. Patients' functional status was categorized into 4 groups based on the Harris Hip Score (HHS) at the final follow-up: 70=poor result; 70-80=fair; 80-90=good, and 90-100=excellent. Intraand postoperative complications were also recorded. PPF union was defined clinically as the patient's ability to bear full weight with or without assistance and radiographically as the presence of a callus bridging the fracture. Subgroup analyses were conducted according to the Vancouver classification and type of fixation regarding the HHS and time to union. The mean age was 57 ± 16.6 (range, 17-82) years at the time of the primary hip replacement and 64 ± 18.7 (range, 24-88) years at the time of PPF. The mean follow-up was 5.6 ± 3.3 (range, 2-14) years from primary procedure to PPF and 6.5 ± 4.1 (range, 3-15) years following PPF. There were 7 type B1 and 18 type C PPFs. At the final follow-up, the mean HHS was 71 ± 7.74 (range, 57-89). According to HHS, functional results were poor in 8 patients, fair in 14 patients, and good in 3 patients. No major intra- or postoperative complications were noted. Fracture union was achieved in all patients without complications at an average of 13 ± 4.9 (range, 6-24) weeks. In subgroup analysis, while no significant differences were observed in the HHS (P=.87 for the Vancouver type, P=.96 for the type of fixation), time to union differed among groups. Time to union was significantly shorter in type B1 than in type C PPFs (P=.006). Time to union was considerably shorter in the uncemented group compared to the cemented one (P=.017). Adding cables to the locking plate can provide adequate stability to preserve fracture alignment and achieve bony union in Vancouver type B1 and C PPFs. Although union can be achieved by ORIF in such patients, a longer union time may be required for PPFs in the setting of a cemented femoral stem or Vancouver type C. Level IV, Therapeutic study.

Influence of Framework Material and Abutment Configuration on Fatigue Performance in Dental Implant Systems: A Finite Element Analysis.

Background and Objectives: This study uses finite element analysis to evaluate the impact of abutment angulation, types, and framework materials on the stress distribution and fatigue performance of dental implant systems. Materials and Methods: Three-dimensional models of maxillary three-unit fixed implant-supported prostheses were analyzed. Abutments with different angles and types were used. Two different framework materials were used. Conducted on implants, a force of 150 N was applied obliquely, directed from the palatal to the buccal aspect, at a specific angle of 30 degrees. The distribution of stress and fatigue performance were then assessed, considering the types of restoration frameworks used and the angles of the abutments in three distinct locations. The simulation aspect of the research was carried out utilizing Abaqus Software (ABAQUS 2020, Dassault Systems Simulation Corp., Johnston, RT, USA). Results: In all models, fatigue strengths in the premolar region were higher than in the molar region. Maximum stress levels were seen in models with angled implants. In almost all models with the zirconia framework, fatigue performance was slightly lower. Conclusions: According to the findings of this study, it was concluded that the use of metal-framework multi-unit restorations with minimum angulation has significant positive effects on the biomechanics and long-term success of implant treatments.

Effect of clinician's experience and expertise on the inter- and intra-observer reliability of the computed tomography-based classification systems in posterior malleolus fractures.

Three computed tomography (CT)-based classifications, including Haraguchi, Bartonícek-Rammelt, and Mason-Molloy systems, have been developed to better determine the characteristics of posterior malleolus fractures (PMFs). The aims of this study were (1) to determine the intra- and inter-observer reliability of the computed tomography-based classification systems and (2) to investigate the clinical experience and expertise on their reliabilities. Sixty-seven preoperative ankle CT scans of 67 adult patients with "ankle fracture with the involvement of the posterior malleolus"'' were retrospectively identified. CT images were assessed by 10 observers with different levels of clinical experience from 2 different specialties, including orthopedics and radiology. The observers were asked to classify PMFs according to 3 CT-based classifications on 2 separate occasions with a 4-week interval. Cohen's κ values were measured for 2 raters and Fleiss' κ values were measured for 3 raters and more. Overall, each classification had moderate to very good intraobserver reliability (κ=0.41 to 0.95, P < .01) as well as moderate interobserver reliability for each of the 2 separate assessments (κ=0.41 to 0.60, P < .01 for the first occasion; κ=0.44 to 0.59, P < .01 for the second occasion). Interobserver agreement among the foot and ankle surgeons regarding the Haraguchi and Bartonícek classifications was substantial for both assessment periods, whereas there was a moderate agreement for the Mason classification. Orthopedic residents showed moderate interobserver agreement in each period for both Bartonícek and Mason classifications. Radiology experts illustrated slight and fair agreements in the 2 assessments for Mason classification, moderate agreement in both assessments for Haraguchi classification, and substantial to moderate agreement in the first and second assessments for Bartonícek classification, respectively. Computed tomography-based classification system for PMFs demonstrated moderate interobserver reliability as well as moderate to very good intraobserver reliability. Moreover, foot and ankle specialists exhibit enhanced K values for both inter and intraobserver reliability for each classification system, consistency seems to increase as the interest in the field condenses.

Residual gait deviations in children treated by medial open reduction for developmental dysplasia of the hip at long-term follow-up: a comparison with healthy controls.

PURPOSE: This study aimed to analyze and compare gait patterns and deviations at long-term follow-up in children who received medial open reduction (MOR) before 18 months for unilateral or bilateral hip developmental dysplasia (DDH). METHODS: A retrospective chart review was conducted on children who underwent MOR. The study population was divided into two groups: the unilateral group, including unilateral (five children with unilateral) and bilateral (five children with bilateral DDH). Ten healthy children were recruited for the control group. Spatiotemporal, kinematic, stiff-knee gait (SKG), and kinetic gait characteristics were analyzed. RESULTS: Stance time was significantly shorter in both the unilateral (median [IQR]; 590 ms, [560.0-612.5] and bilateral (575 ms, [550-637.5]) groups than in the control group (650, [602.5-677.5]) (p < 0.001), whereas swing time did not differ substantially (p = 0.065) There was no considerable difference in the mean knee flexion at swing between the unilateral (31.6°, [30-36]) and control (30.11°, [27.8-33.6] groups (p > 0.05), but the bilateral group (28.5°, [24.9-32.1]) showed the lower values than the other groups (p < 0.001 for bilateral vs unilateral group; p = 0.008 bilateral vs unilateral group). All the SKG parameters significantly differed among the groups in multi-group comparisons (p < 0.001 for each parameter). Three children had borderline SKG, and two had not-stiff limbs in the unilateral group. In the bilateral group, four children had stiff limbs, and one had borderline SKG. Most kinetic gait parameters were not statistically different between groups (p > 0.05). CONCLUSION: This study has revealed notable deviations in gait patterns of children with DDH treated by MOR at long-term follow-up compared to healthy children's gait. MOR could negatively affect pelvic motion during gait due to impaired functions of the iliopsoas and adductor muscles, and SKG can be encountered secondary to iliopsoas weakness.

Nature relatedness, flow experience, and environmental behaviors in nature-based leisure activities.

Introduction: Through nature-based leisure activities, spending time in nature offers opportunities to reduce stress, relax the mind, and enhance feelings of well-being. Being aware of the benefits provided by these activities increases the nature relatedness, and during the time spent in nature, it enables experiencing positive and satisfying moments by entering into a state of flow. The concepts of nature-relatedness and flow experience represent psychological experiences and characteristics that play an important role in enhancing psychological well-being and life quality. Methods: Based on structural equation models, the relationships among nature-relatedness, flow experience, and environmental behaviors were investigated. Data were collected from 379 individuals (212 male, 167 female) who regularly engage in nature-based leisure activities such as cycling, hiking, and fishing. The participants were predominantly male (55.9%) and aged 45 years and over (53.3%). Results: The nature-relatedness significantly influences flow experience (R 2 = 0.505, p < 0.01), environmental behavior (R 2 = 0.108, p < 0.01), environmental sensitivity (R 2 = 0.137, p < 0.01), and communication with nature (R 2 = 0.200, p < 0.01). Specifically, nature-relatedness directly enhanced environmental sensitivity (0.494 total effect), environmental behavior (0.604 total effect), and communication with nature (0.599 total effect) and did so both directly and indirectly through the mediation of flow experience. Discussion: A higher level of nature-relatedness can lead to a stronger flow experience, which in turn can increase positive. environmental behavior, environmental sensitivity, and communication with nature.

The work-life balance: understanding the role of leisure involvement on workaholism from a gender perspective.

BACKGROUND: Work-life balance is an increasingly important issue in modern work environments, referring to a healthy harmony between work and personal life. Leisure is a crucial element supporting this balance, yet negative tendencies such as workaholism can challenge it. Over time, this can diminish work performance and lead to health problems. OBJECTIVE: This study aims to understand the role of leisure involvement in workaholism and evaluate this relationship with consideration for gender differences. METHOD: The data of the research were obtained through survey. The survey collected from individuals working in shopping centres in Konya province of Türkiye by using simple random sampling method. A total of 389 individuals (185 female and 204 male) working in shopping centers participated in the study. RESULTS: The findings indicate significant differences in leisure involvement and workaholism concerning gender. Additionally, a relationship between leisure involvement and workaholism was identified, with gender having a moderating effect on this relationship. CONCLUSION: Consequently, it was determined that women exhibit higher levels of leisure involvement and workaholism tendencies compared to men, highlighting the crucial role of the relationship between leisure involvement and workaholism in ensuring work-life balance. The results of the research are discussed in the relevant section. Based on the findings, theoretical and managerial implications are developed.

A new configuration of lateral-pin fixation for pediatric supracondylar humeral fracture: A biomechanical analysis.

OBJECTIVE: The aim of this study was to biomechanically compare a new lateral-pinning technique, in which pins engage the medial and lateral columns of the distal humerus in a divergent configuration in both the axial and sagittal planes instead of the coronal plane, with the cross-pin, and with 2 and 3 coronally divergent lateral-pin techniques in a synthetic humerus model of supracondylar humerus fractures. METHODS: Thirty-six identical synthetic models of the humerus simulating a standardized supracondylar humerus fracture were included in this study. They were divided into 4 groups based on the pin configuration of fixation: the new 3-lateral pin-fixation technique (group A), 2 crossed pins (group B), 3 divergent lateral pins (group C), and 2 divergent lateral pins (group D). Each model was subjected to combined axial and torsional loading, and then torsional stability and torsional stiffness (Nmm/°) were recorded. RESULTS: Group A had greater rotational stability than groups C and D but had no statistically significant additional rotational stability compared with group B (P=.042, P=.008, P=.648, respectively), whereas group B had greater rotational stability than only group D (P=.020). Furthermore, group A demonstrated higher internal rotational stiffness compared with groups C and D (P=.038, P=.006, respectively). Group B had better internal rotational stiffness than group D (P=.015). There was no significant difference in internal rotational stiffness between groups A and B (P=. 542), groups B and C (P=.804), and groups D and C (P=.352). Although no statistically significant differences existed between groups A and B, the modified pin configuration exhibited the highest torsional stability and stiffness. Group D showed the lowest values in all biomechanical properties. CONCLUSION: This study has shown us that this new lateral-pinning technique may provide torsional resistance to internal rotational displacement as strong as the standard technique of crossed-pin configuration of fixation. Furthermore, with this new pin configuration, greater torsional resistance can be obtained than with either the standard 2- or the standard 3-lateral divergent pin configuration. Cite this article as: Bilgili F, Demirel M, Birisik F, Balci HI, Sunbuloglu E, Bozdag E. A new configuration of lateral-pin fixation for pediatric supracondylar humeral fracture: A biomechanical analysis. Acta Orthop Traumatol Turc., 2023 10.5152/j.aott.2024.21091 [Epub Ahead of Print].

Anterior tibial artery pseudoaneurysm secondary to articulating spacer use for infected knee arthroplasty: A case report.

INTRODUCTION: Neurovascular compromise following primary or revision total knee arthroplasty is a rare but severe complication. To the best of our knowledge, there have been reports of pseudoaneurysm of the popliteal artery following primary and revision; however, an anterior tibial artery pseudoaneurysm with articulating spacer has not been described yet. CASE PRESENTATION: We introduce a rare case of anterior tibial artery pseudoaneurysm and concomitant foot drop caused by an articulating spacer in a two-stage revision for infected knee replacement. Displacement of the articular spacer was observed on knee x-rays. Hematoma and pseudoaneurysm were detected. The patient was operated on urgently, and a pseudoaneurysm originating from the anterior tibial artery was intraoperatively observed. DISCUSSION: Vascular complications following TKA are rare but could be limb-threatening and even life-threatening. If postoperative displacement of the articulating spacer is observed with neurovascular symptoms, orthopedic surgeons should be alerted to the possibility of a pseudoaneurysm. CONCLUSION: Although rare, anterior tibial artery pseudoaneurysm should be considered among vascular injuries in revision knee arthroplasty cases.

The Effect of Supplementary Staple Fixation on Biomechanical Properties of Soft Tissue Graft Tibial Fixation in Anterior Cruciate Ligament Reconstruction.

This study aimed to test and compare the biomechanical properties of three tibial fixation methods of anterior cruciate ligament (ACL) tendon grafts under cyclic load and load-to-failure testing in the bovine proximal tibiae, comprising (1) staple fixation alone, (2) interference screw fixation alone, and (3) interference screw fixation with a supplementary staple. Twenty-four bovine tibiae used in the study were divided into three groups (eight proximal tibiae in each group) based on tibial fixation methods of ACL tendon grafts: group A (a spiked ligament staple alone), group B (a cannulated interference screw alone), and group C (a cannulated interference screw with a supplementary staple). Each graft fixation was exposed to cyclic loading conditions. Significant differences were determined in failure load among the three groups (p = 0.008). The mean failure load was significantly higher in group B (717.04 ± 218.51 N) than in group A (308.03 ± 17.22 N) (p = 0.006). No significant differences were observed among the groups regarding axial stiffness (p = 0.442). Cyclic displacement differed significantly among the three groups (p = 0.005). In pairwise comparisons, the mean cyclic displacement was significantly higher in group A (8.22 ± 3.24 mm) compared with group C (1.49 ± 0.41 mm) (p = 0.005). Failure displacement varied considerably among the groups (p = 0.037). Although group B (15.53 ± 6.43 mm) exhibited a greater mean failure displacement than both group A (4.9 ± 0.75 mm) and group C (8.84 ± 4.65 mm), these differences did not reach statistical significance (p = 0.602 and p = 0.329, respectively). Interference screw fixation alone and supplementary staple fixation have biomechanically similar characteristics in terms of initial strength and stiffness of tibial ACL soft tissue graft fixation. Regardless of staple use, an interference screw with the same diameter as the tibial tunnel can ensure sufficient tensile strength in tibial ACL graft fixation.

Preliminary Results of Calcaneal Lengthening Osteotomy Combined With Extra-articular Subtalar Arthrodesis for Severe Pes Planovalgus Deformity in Children With Cerebral Palsy: A New Surgical Technique.

OBJECTIVE: Pes planovalgus is the most common foot deformity seen in patients with cerebral palsy (CP). There are several different treatment modalities to treat this condition. Single or double calcaneal osteotomies, extra-articular arthrodesis, calcaneo-cuboido-cuneiform osteotomy, intraarticular arthrodesis, and arthroereisis are some of these modalities. Currently, there is insufficient information to determine the most effective treatment approach for pes planovalgus in children with CP. The aim of this study is to show the short to mid-term results of the new technique which combines calcaneus lengthening osteotomy, extra-articular subtalar arthrodesis, and soft tissue reconstruction that aims to decrease recurrence and complication rates of pes planovalgus surgery for patients with ambulatory CP. METHODS: Patients with CP who were treated with calcaneal lengthening surgery and extra-articular subtalar arthrodesis between 2018 and 2021 were investigated retrospectively. All patients were ambulatory and Gross Motor Function Classification System I-II-III. Functional levels of the patients were assessed with the American Orthopaedic Foot and Ankle Society, Ankle-Hindfoot Score, and the Foot and Ankle Ability Score (Foot and Ankle Ability Measure) in preoperative and postoperative periods. On anteroposterior x-rays, talus-first metatarsal, talocalcaneal, talonavicular coverage angle and on lateral x-rays talus-first metatarsal, talocalcaneal, calcaneal inclination angle and talar tilt angle were evaluated. RESULTS: The mean follow-up was 46 (range: 36 to 60) months. The mean American Orthopaedic Foot and Ankle Society increased from 41 (20 to 79) to 74 (38 to 93; P < 0.001). The mean Foot and Ankle Ability Measure increased significantly from 35 (7 to 73) to 54 (29 to 96; P <0.001). Clinical results were "satisfactory" for 32 feet, while they were "unsatisfactory" for 2 feet. Significant deformity correction was observed in all radiologic parameters. CONCLUSION: Our technique is found to be efficient for patients with Gross Motor Function Classification System I-II-III CP with pes planovalgus deformity. In short to mid-term follow-up, the technique achieved successful clinical and radiologic results with low complication rates. Superiority of this technique compared with the traditional ones can only be shown with randomized prospective studies. LEVEL OF EVIDENCE: Level III-retrospective cohort study.

Long-term Clinical and Radiographic Outcomes Following Surgical Treatment for Ankle Fracture-Dislocations: Do poor radiographic outcomes always matter?

Background Ankle fractures constitute 10% of all traumatic fractures in clinical practice. Concurrent tibiotalar dislocations form 21-36% of all ankle fractures. Although mechanism of injury is similar to non-dislocated ankle fractures, fracture-dislocations cause more extensive bone and soft tissue damage. Treatment is a challenge for orthopedic surgeons due to concomitant pathologies. It is associated with malreduction, chronic pain and most importantly, posttraumatic osteoarthritis. We aimed to investigate the relationship between ankle osteoarthritis radiographic stage and clinical outcomes. Methods 27 patients (17 female, 10 male) were included in the study. Records and data were retrospectively analyzed. Clinical status at the final follow-up was evaluated by a single orthopedic surgeon. Range of motion (ROM), American Orthopedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot Score, visual analogue scale (VAS) were the clinical parameters that were assessed. Radiological assessment was made by standard anteroposterior [AP], lateral, and mortise views. Pre-operative osseo-ligamentous injury pattern, presence of posterior malleolar fracture, syndesmosis injury and post-operative ankle osteoarthritis were investigated. Results For 27 patients that were evaluated, at the final follow-up, mean AOFAS was 85 ± 8.12, and mean VAS during daily activities was 1.52 ± 0.70. Mean ankle dorsiflexion and plantar flexion were significantly lower on the affected sides (14.07 ± 7.97° and 36.30 ± 6.59°) than on the unaffected sides (28.15 ± 2.82° and 46.30 ± 2.97°), respectively (p < 0.001). No significant difference for inversion and eversion was observed. Twenty-four patients demonstrated radiographic signs of ankle osteoarthritis, and three remained without evidence of osteoarthritis. No significant difference was found among Takakura's stages in any of the variables. Conclusion The results illustrated that although post-traumatic osteoarthritis rate was high for ankle fracture-dislocation patients, surgical treatment achieved excellent functional results. Even if advanced stages of ankle arthritis according to Takakura's classification developed, patients had satisfactory clinical and functional results.

Bayesian Statistical Analysis for Bacterial Detection in Pulmonary Endomicroscopic Fluorescence Lifetime Imaging.

Pneumonia, a respiratory disease often caused by bacterial infection in the distal lung, requires rapid and accurate identification, especially in settings such as critical care. Initiating or de-escalating antimicrobials should ideally be guided by the quantification of pathogenic bacteria for effective treatment. Optical endomicroscopy is an emerging technology with the potential to expedite bacterial detection in the distal lung by enabling in vivo and in situ optical tissue characterisation. With advancements in detector technology, optical endomicroscopy can utilize fluorescence lifetime imaging (FLIM) to help detect events that were previously challenging or impossible to identify using fluorescence intensity imaging. In this paper, we propose an iterative Bayesian approach for bacterial detection in FLIM. We model the FLIM image as a linear combination of background intensity, Gaussian noise, and additive outliers (labelled bacteria). While previous bacteria detection methods model anomalous pixels as bacteria, here the FLIM outliers are modelled as circularly symmetric Gaussian-shaped objects, based on their discrete shape observed through visual analysis and the physical nature of the imaging modality. A Hierarchical Bayesian model is used to solve the bacterial detection problem where prior distributions are assigned to unknown parameters. A Metropolis-Hastings within Gibbs sampler draws samples from the posterior distribution. The proposed method's detection performance is initially measured using synthetic images, and shows significant improvement over existing approaches. Further analysis is conducted on real optical endomicroscopy FLIM images annotated by trained personnel. The experiments show the proposed approach outperforms existing methods by a margin of +16.85% ( F1 ) for detection accuracy.

Augmentation with a non-vascularized autologous fibular graft for the management of Cierny-Mader type IV chronic femoral osteomyelitis: a salvage procedure.

PURPOSE: The study aimed to evaluate preliminary clinical and radiographic results of patients with Cierny-Mader type IV chronic femoral osteomyelitis and augmented with a non-vascularized fibular autograft as a salvage procedure because of the poorly regenerated new bone after bone transport over an intramedullary nail (BTON). METHODS: Patients diagnosed with CM type IV chronic femoral bone infection and treated with BTON procedure between 2003 and 2020 were retrospectively reviewed. Seven patients were included in the study whose distraction gap was poorly regenerated and then augmented with a non-vascularized fibular autograft. A three-stage treatment was administered. First, the infection was eradicated. Second, BTON was performed. Third, the poorly regenerated distraction gap was augmented with a fibular autograft before removing the external fixator (EF). Clinical and radiological results were evaluated based on the criteria described by Paley-Maar and Li classification. RESULTS: The mean patient age was 52 years. The mean treatment time was 24.8 months, with a mean femoral lengthening of 12.6 cm. The mean EF and bone healing indexes were 0.57 months/cm and 0.8 months/cm, respectively. The mean length of the fibular graft was 13 cm. The bone healing of new bones was achieved in all patients with good quality after grafting. Functional scores were excellent in four patients. No patients experienced any sequelae. CONCLUSIONS: Non-vascularized fibular autograft augmentation may be an effective salvage procedure for poorly regenerated new bone after BTON to manage chronic femoral bone infection.

Effect of strategies to increase progesterone levels on fertility of bovine embryo transfer recipients - A meta-analysis.

The pregnancy rate following embryo transfer (ET) is a very important factor in the success of embryo production programs. Different strategies were therefore developed to increase pregnancy rates. The aim of this meta-analysis was to investigate the effects of hormone treatments used to increase the success of embryo transfer programs on pregnancy rates. A meta-analysis was performed of 46 trials from 39 publications involving treated (n = 7856) and control (n = 6663) cattle. The meta-analysis explained the effect size with its 95 % confidence interval (CI) for pregnancy per embryo transfer (P/ET) after hormonal treatment under different moderators. Hormonal support was found to increase P/ET compared to the control group (P < 0.05). However, GnRH treatment was found to increase P/ET by approximately 4.3 % and hCG treatment by 8.0 %. Progesterone supplementation was not found to have a statistically significant effect on P/ET. In addition, GnRH treatment significantly increased P/ET when used to transfer in vitro or frozen-thawed embryos or in studies using cows as recipients. It was observed that hCG treatment had a positive effect on P/ET according to all moderators. Progesterone supplementation significantly increased P/ET when frozen embryos were transferred and reduced P/ET, especially in publications where fresh or in vitro produced embryos were transferred or cows were used as recipients. The results of this meta-analysis showed that the use of GnRH, and hCG, in bovine embryo transfer programs increased P/ET, whereas the use of progesterone had no effect on P/ET. However, it was found that P/ET could increase/decrease depending on the moderator.

Biomechanical Comparison of Uniplanar versus Biplanar Lateral Opening-wedge Distal Femoral Osteotomy Techniques in Terms of Risk for Medial Hinge Fracture.

The effect of osteotomy type on the initial stiffness of the bone-implant construct in lateral opening-wedge distal femoral osteotomy (LOWDFO) using a uniplanar compared with a biplanar technique has been investigated. However, no study has explored the biomechanical risk factors for medial hinge fracture. This study aimed to compare the biomechanical strength of uniplanar versus biplanar LOWDFO regarding the risk for medial hinge fracture during gap opening. Twelve composite femora were divided into two groups (six in each group) based on the distal femoral osteotomy technique: uniplanar versus biplanar LOWDFO. All LOWDFO models were subjected to incremental static loading. The gap distance was expanded by 1 mm, and displacement values were recorded as anterior and posterior gap distances (mm). The average force values of all samples at certain gap distances were recorded, and the head distance was measured. The uniplanar group had higher load values than the biplanar group at all anterior gap distances. These differences were only significant at 2- and 3-mm gap distances (p = 0.025 and 0.037). At all posterior gap distances, the uniplanar group had higher load values than the biplanar group, but these differences only reached statistical significance at 2 mm (p = 0.037). Both groups had similar anterior, posterior, and average gap distances (p = 0.75, 0.522, 0.873). The uniplanar group had a higher head insertion distance (15.3 ± 5.7) than the biplanar group (14.7 ± 2.9), but it was not significant (p = 0.87). The uniplanar group had a lower average load before medial hinge fracture (46.41 ± 13.91 N) than the biplanar group (54.92 ± 31.94, p = 0.81). The biplanar group had an average maximum load value of 64.18 ± 25.6 N, while the uniplanar group had 57.90 ± 12.21 N (p = 0.81). This study revealed that the biplanar osteotomy technique allows a wider opening wedge gap with less risk of a medial hinge fracture than uniplanar LOWDFO.Level of evidence was level 3, case-control series.

Arthroscopic Dorsal Ligamentocapsulodesis in the Treatment of Occult Dorsal Wrist Ganglion Cysts Associated with Scapholunate Instability: Surgical Technique and Preliminary Clinical Results.

Background: This study aimed to evaluate our preliminary results and experience with the arthroscopic dorsal ligamentocapsulodesis in managing occult dorsal wrist ganglion cysts (ODGCs) associated with scapholunate (SL) instability. Methods: All patients who underwent arthroscopic dorsal ligamentocapsulodesis due to an ODGC with concomitant SL ligament tear were retrospectively reviewed. In addition to demographic data and length of follow-up, outcomes data that included range of motion, grip strength, modified Mayo wrist score (MMWS), complications and radiographs were collected. Results: The study included 18 patients (18 wrists; 10 female and 8 male). The mean age was 32 years (range: 19-48) and the mean follow-up was 34 months (range: 24-48). The mean preoperative extension deficit decreased from 5.5° (range: 0°-20°) to 2.7° (range: 0°-15°) at the final follow-up (p = 0.004). The mean preoperative flexion deficits decreased from 4.4° (range: 0°-15°) to 2.2° (range: 0°-10°) postoperatively (p = 0.003). The mean hand grip strength significantly increased from 27.7 kg (range: 22-36) to 38.3 kg (range: 31-46) at the final follow-up assessment (p < 0.001). The mean MMWS improved from 46 (range: 25-65) pre-operatively to 91 (range: 70-100) at the final follow-up (p = 0.0002). No major intra- or postoperative complications were observed. Conclusions: SL instability may have an important role in the aetiology of ODGCs, and arthroscopic dorsal ligamentocapsulodesis can provide pain relief and functional improvement without recurrence at the short- to mid-term follow-up in the treatment of ODGCs. Level of Evidence: Level IV (Therapeutic).

Comparison of sinus tarsi approach versus extensile lateral approach in the management of displaced intra-articular calcaneal fractures: A single-center study.

BACKGROUND: Controversy still exists for optimal treatment for displaced intra-articular calcaneal fractures (DIACFs). Conven-tionally, the extensile lateral approach (ELA) has been the most preferred approach. Although ELA provides excellent fracture access and direct evaluation of the depressed posterior facet, this approach has a high rate of serious complications, such as hematoma, superficial/deep infection, and wound healing issues. To overcome such complications, more minimally invasive techniques including external fixation, percutaneous fixation, arthroscopic assisted fixation, and sinus tarsi approach (STA) have been recently described. The primary aim of this study was to compare STA and LEA in the treatment of DIACFs. METHODS: Patients who were operated for DIACFs in our clinic were included in the study. Patients with closed DIACFs of Sanders Type II, III, IV, and over 18 years of age were identified. Physical examinations and radiological evaluations of the patients were per-formed, and clinical scores were filled. Patients were divided into subgroups according to the Sander's classification and comparisons were made again according to these subgroups. RESULTS: There were 37 patients (four female and 33 male) in STA group and 44 patients in LEA group (six female and 38 male). The mean age was 44.42±13.57 years (range, 18-61) for STA group and 37.32±11.09 years (range, 18-56) for the LEA group. In clinical outcomes, except for short-form survey (SF-12)/MCS-12 (Mental Score) and visual analog scale score, all the parameters were signifi-cantly better in STA group compared to LEA group. No significant difference was observed between the two groups in radiographic results, except for the Böhler angle. Significantly less infection occurred in the STA group compared to LEA group (P=0.021). According to Sander's classification, American Orthopedic Foot and Ankle Society, foot and ankle disability index, and SF-12/PCS-12 and foot function index scores, no significant differences were determined between STA and LEA groups for Sanders Type 2, whereas the values were considerably higher in STA group than in LEA group for Sanders Type 3 and 4. CONCLUSION: In DIACFs, STA is considered a safe and effective method for restoring the width, height, and length of the calca-neus and reconstruction of joint alignment and has now become our standard technique for all calcaneal fractures requiring operative treatment.

Crack Propagation and Fatigue Performance of Partial Posterior Indirect Restorations: An Extended Finite Element Method Study.

Dental ceramics are susceptible to slow, progressive crack growth after cyclic loading. The purpose of this study was to investigate the progressive patterns of cracks in two different types of CAD/CAM ceramic materials used with three different partial posterior indirect restoration (PPIR) designs and to determine the materials' failure risk using a fatigue test. Standard initial cracks were formed in Standard Tessellation Language (STL) files prepared for three different PPIRs. The materials chosen were monolithic lithium disilicate (LS) and polymer-infiltrated ceramic networks (PICNs). The extended finite element method (XFEM) was applied, and the fatigue performance was examined by applying a 600 N axial load. The cracks propagated the most in onlay restorations, where the highest displacement was observed. In contrast, the most successful results were observed in overlay restorations. Overlay restorations also showed better fatigue performance. LS materials exhibited more successful results than PICN materials. LS materials, which can be used in PPIRs, yield better results compared to PICN materials. While inlay restorations demonstrated relatively successful results, overlay and onlay restorations can be specified as the most and the least successful PPIR types, respectively.

Effect of putrescine supplementation to in vitro maturation medium on embryo development and quality in cattle.

This study aimed to investigate the effect of putrescine supplementation to maturation medium during in vitro embryo production in cattle on maturation and embryo development/quality. Oocytes obtained from the ovaries of Holstein cattle were used in the study. Obtained cumulus-oocyte complexes were evaluated according to morphological structure, cytoplasmic features, and cumulus cell number, and only Category-I ones were used in the study. Before the in vitro maturation step, oocytes were randomly divided into two groups. In the first group (Putrescine group, n = 159), 0.5 mM putrescine was added to the maturation medium before in vitro maturation. No addition was applied to the maturation medium of the second group (Control group, n = 149). Cumulus expansion degrees of oocytes following maturation (Grade I: poor, Grade II: partial, and Grade III: complete) were determined. In addition, the meiosis of oocytes after maturation was evaluated by differential staining. Then the oocytes were left for fertilization with sperm and finally, possible zygotes were transferred to the culture medium. After determining the developmental stages and quality of the embryos after in vitro culture, only the embryos at the blastocyst stage were stained with the differential staining method to determine the cell numbers. When the cumulus expansion degrees of the groups were evaluated, the Grade III cumulus expansion rate in the putrescine group was higher than the control group (74.21% and 60.4%; respectively) and the Grade I expansion rate (11.95% and 26.17%; respectively) was found lower (p < .05). When the resumption of meiosis was evaluated according to the cumulus expansion degrees, it was determined that the rate of resumption of meiosis increased as the cumulus expansion increased. In addition, the cleavage rates of oocytes and reaching the blastocyst in the putrescine group were found to be higher than in the control group (p < .05). Moreover, inner cell mass, trophectoderm cells, and total cell counts were found to be higher in blastocysts obtained after the putrescine supplementation to the maturation medium compared to the control group (p < .05). As a result, it was determined that the putrescine supplementation to the maturation medium during in vitro embryo production in cattle increased the degree of cumulus expansion and the rate of resumption of meiosis. In addition, putrescine supplementation was thought to increase the rate of reaching the blastocyst of oocytes due to better cell development in embryos.