Conjugated polymer blends for faster organic mixed conductors.

A model mixed-conducting polymer, blended with an amphiphilic block-copolymer, is shown to yield systems with drastically enhanced electro-chemical doping kinetics, leading to faster electrochemical transistors with a high transduction. Importantly, this approach is robust and reproducible, and should be readily adaptable to other mixed conductors without the need for exhaustive chemical modification.

Temperature-Dependent Structural Phase Transition in Rubrene Single Crystals: The Missing Piece from the Charge Mobility Puzzle?

Accurate structural models for rubrene, the benchmark organic semiconductor, derived from synchrotron X-ray data in the temperature range of 100-300 K, show that its cofacially stacked tetracene backbone units remain blocked with respect to each other upon cooling to 200 K and start to slip below that temperature. The release of the blocked slippage occurs at approximately the same temperature as the hole mobility crossover. The blocking between 200 and 300 K is caused by a negative correlation between the relatively small thermal expansion along the crystallographic b-axis and the relatively large widening of the angle between herringbone-stacked tetracene units. DFT calculations reveal that this blocked slippage is accompanied by a discontinuity in the variation with temperature of the electronic couplings associated with hole transport between cofacially stacked tetracene backbones.

A Low-Swelling Polymeric Mixed Conductor Operating in Aqueous Electrolytes.

Organic mixed conductors find use in batteries, bioelectronics technologies, neuromorphic computing, and sensing. While great progress has been achieved, polymer-based mixed conductors frequently experience significant volumetric changes during ion uptake/rejection, i.e., during doping/de-doping and charging/discharging. Although ion dynamics may be enhanced in expanded networks, these volumetric changes can have undesirable consequences, e.g., negatively affecting hole/electron conduction and severely shortening device lifetime. Here, the authors present a new material poly[3-(6-hydroxy)hexylthiophene] (P3HHT) that is able to transport ions and electrons/holes, as tested in electrochemical absorption spectroscopy and organic electrochemical transistors, and that exhibits low swelling, attributed to the hydroxylated alkyl side-chain functionalization. P3HHT displays a thickness change upon passive swelling of only +2.5%, compared to +90% observed for the ubiquitous poly(3,4-ethylenedioxythiophene):polystyrene sulfonate, and +10 to +15% for polymers such as poly(2-(3,3'-bis(2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-[2,2'-bithiophen]-5-yl)thieno[3,2-b]thiophene) (p[g2T-TT]). Applying a bias pulse during swelling, this discrepancy becomes even more pronounced, with the thickness of P3HHT films changing by <10% while that of p(g2T-TT) structures increases by +75 to +80%. Importantly, the initial P3HHT film thickness is essentially restored after de-doping while p(g2T-TT) remains substantially swollen. The authors, thus, expand the materials-design toolbox for the creation of low-swelling soft mixed conductors with tailored properties and applications in bioelectronics and beyond.

A positive to negative uniaxial thermal expansion crossover in an organic benzothienobenzothiophene structure.

Compound 6,6'-([1]benzothieno[3,2-b][1]benzothiophene-2,7-diyl)bis(butan-1-ol) (BTBT-C4OH) displays a continuous type 0 first-order isosymmetric phase transition at 200 K which is accompanied by a continuous change of the thermal expansion along the b axis from positive to negative. The equivalent isotropic atomic displacement parameters for all non-hydrogen atoms as well as all the eigenvalues of the anisotropic atomic displacement tensor show discontinuous behavior at the phase transition. The eigenvalues of the translational tensor in a rigid-body description of the molecule are all discontinuous at the phase transition, but the librational eigenvalues are discontinuous only in their temperature derivative. BTBT-C4OH displays a similar type of quasi-supercritical phase transition as bis(hydroxyhexyl)[1]benzothieno[3,2-b][1]benzothiophene (BTBT-C6OH), despite the difference in molecular packing and the very large difference in thermal expansion magnitudes.

Experimental and theoretical evidence of a supercritical-like transition in an organic semiconductor presenting colossal uniaxial negative thermal expansion.

Thermal expansion coefficients of most materials are usually small, typically up to 50 parts per million per kelvin, and positive, i.e. materials expand when heated. Some materials show an atypical shrinking behavior in one or more crystallographic directions when heated. Here we show that a high mobility thiophene-based organic semiconductor, BHH-BTBT, has an exceptionally large negative expansion between 95 and 295 K (-216 < α2 = αb < -333 MK-1), being compensated by an even larger positive expansion in the perpendicular direction (287 < α1 < 634 MK-1). It is shown that these anomalous expansivities are completely absent in C8-BTBT, a much studied organic semiconductor with a closely related molecular formula and 3D crystallographic structure. Complete theoretical characterization of BHH-BTBT using ab initio molecular dynamics shows that below ∼200 K two different α and ß domains exist of which one is dominant but which dynamically exchange around and above 210 K. A supercritical-like transition from an α dominated phase to a ß dominated phase is observed using DSC measurements, UV-VIS spectroscopy, and X-ray diffraction. The origin of the extreme negative and positive thermal expansion is related to steric hindrance between adjacent tilted thiophene units and strongly enhanced by attractive S···S and S···C interactions within the highly anharmonic mixed-domain phase. This material could trigger the tailoring of optoelectronic devices highly sensitive to strain and temperature.

Bis-Azide Low-Band Gap Cross-Linkable Molecule N3-[CPDT(FBTTh2)2] to Fully Thermally Stabilize Organic Solar Cells Based on P3HT:PC61BM.

We synthesized a novel bis-azide low-band gap cross-linkable molecule N3-[CPDT(FBTTh2)2] with wide absorption. This compound is of interest as an additive in polymer/fullerene bulk heterojunction solar cells. In addition to providing efficient thermal stabilization of the morphology, the additive can harvest additional solar light compared with pristine poly(3-hexyl thiophene) to improve the power-conversion efficiency (PCE). The additional donor material was visualized from the appearance of additional external quantum efficiency contributions between 650 and 800 nm. An open-circuit voltage increase of ∼2% compensates the decrease in the short-circuit current of ∼2% to achieve a fully thermally stabilized PCE of 3.5% after 24 h of annealing at 150 °C.

The Importance of Materials Design to Make Ions Flow: Toward Novel Materials Platforms for Bioelectronics Applications.

Chemical design criteria for materials for bioelectronics applications using a series of copolymer derivatives based on poly(3-hexylthiophene) are established. Directed chemical design via side-chain functionalization with polar groups allows manipulation of ion transport and ion-to-electron transduction. Insights gained will permit increased use of the plethora of materials employed in the organic electronics area for application in the bioelectronics field.

Thermal stabilisation of polymer-fullerene bulk heterojunction morphology for efficient photovoltaic solar cells.

A novel stable bisazide molecule that can freeze the bulk heterojunction morphology at its optimized layout by specifically bonding to fullerenes is reported. The concept is demonstrated with various polymers: fullerene derivatives systems enable highly thermally stable polymer solar cells.

Electroactive nanorods and nanorings designed by supramolecular association of pi-conjugated oligomers.

In investigations into the design and isolation of semiconducting nano-objects, the synthesis of a new bisureido pi-conjugated organogelator has been achieved. This oligo(phenylenethienylene) derivative was found to be capable of forming one-dimensional supramolecular assemblies, leading to the gelation of several solvents. Its self-assembling properties have been studied with different techniques (AFM, EFM, etc.). Nano-objects have successfully been fabricated from the pristine organogel under appropriate dilution conditions. In particular, nanorods and nanorings composed of the electroactive organogelator have been isolated and characterized. With additional support from an electrochemical study of the organogelator in solution, it has been demonstrated by the EFM technique that such nano-objects were capable of exhibiting charge transport properties, a requirement in the fabrication of nanoscale optoelectronic devices. It was observed that positive charges can be injected and delocalized all along an individual nano-object (nanorod and nanoring) over micrometers and, remarkably, that no charge was stored in the center of the nanoring. It was also observed that topographic constructions in the nanostructures prevent transport and delocalization. The same experiments were performed with a negative bias (i.e., electron injection), but no charge delocalization was observed. These results could be correlated with the nature of 1, which is a good electron-donor, so it can easily be oxidized, but can be reduced only with difficulty.

Self-organized ureido substituted diacetylenic organogel. Photopolymerization of one-dimensional supramolecular assemblies to give conjugated nanofibers.

The introduction of the urea function as structure directing agent of diacetylene organogels (DA-OGs) has been achieved. Despite the urea function being one of the most frequently used structure directing agents for the formation of organogels, it has never been exploited in the fabrication and photopolymerization of DA-OGs. The self-association of ureas involving two hydrogen bonds is much stronger than that of urethanes or amides, and the resulting supramolecular assemblies are completely insoluble. In this context, 1,1'-(hexa-2,4-diyne-1,6-diyl)bis(3-(10-(triethoxysilyl)decyl)urea) 2 was synthesized. Compound 2 was soluble owing to the triethoxysilane function that we recently used in the fabrication of a silylated bis-urea-stilbene organogel. It formed an organogel, and its photopolymerization was studied in cyclohexane. The loss of the gel state and the formation of a red solution resulting from the polymerization were found to be the result of the constraints introduced by the urea function in close vicinity to the polymerizable function. To obtain an ureido substituted diacetylenic organogelator affording a blue highly conjugated polydiacetylene (PDA) without a sol-gel transition, a propylene spacer was introduced to move the urea function away from the polymerizable function (derivative 3). The thermochromism exhibited by the latter in the solid state was studied. Using the same setup and the same sample, UV-vis and FTIR spectra were simultaneously recorded as a function of the temperature to highlight a relation between color changes and urea association mode changes. The data showed that the reversible thermochromic transition must be associated with a reversible supramolecular modification and, conversely, that irreversible chromic transitions are the result of irreversible structural modifications. The chromic effects of the acidic hydrolysis-polycondensation of the trialkoxysilyl groups to form a siloxane network were studied on a thin film of 3. In the same way, solvent effects on the color of the organogels of 3 were also investigated. Correlations could be established between the different stimuli. These results provide a deeper understanding of the precise molecular mechanism of the blue to red transition and of the reversibility of the purple to red transition generally encountered in PDA thermochromism.

Nanostructuration of phenylenevinylenediimide-bridged silsesquioxane: from electroluminescent molecular J-aggregates to photoresponsive polymeric H-aggregates.

A new approach to control molecular aggregation of pi-conjugated chromophores in the solid state has been investigated. Our strategy was to use a modifiable bulky fragment which should induce a J-aggregation and offer the possibility to reach an H-aggregation upon its chemical modification by lateral slip of pi-conjugated molecules. The chosen fragment for that purpose was the hydrolyzable triethoxysilane function (Si(OEt)3). Our objective was to design and synthesize electroluminescent or solar cell hybrid organic-inorganic materials by the sol-gel process applied to a bifunctionalized silane. With this intention, the synthesis of the sol-gel processable phenylenevinylenediimide silsesquioxane 6 was accomplished and the study of spin-coated thin films of the pure silane precursor subjected or not to the sol-gel process has been carried out. Optical properties of 6 are consistent with the formation of J-aggregates in the solid state due to the steric hindrance introduced by the triethoxysilane units. Conversely, the spectroscopic behavior observed for the hybrid film 6F is attributed to an H-aggregation corresponding to a "card pack" orientation of the distyrylbenzeneimide chromophores in the compressed silicate network. Morevover, 6 and 6F also exhibited different electronic behaviors: light-emitting diodes exhibited high brightness with the native precursor 6 and almost no light output with the sol-gel processed silsesquioxane 6F. Photovoltaic cells showed the opposite behavior with low photocurrent generation in the precursor case and higher photocurrents with the sol-gel processed layers. These results provide a deeper understanding of the present self-assembly process that is strongly governed by the molecular packing of the oligosiloxane precursor.

Synthesis and properties of highly fluorescent indolizino[3,4,5-ab]isoindoles.

We report here the synthesis, X-ray structures, optical and electrochemical properties, fabrication of light-emitting devices, and density functional calculations for indolizino[3,4,5-ab]isoindole (INI) derivatives. Strongly luminescent heterocycles based on the INI unit were synthesized by 1,3-dipolar cycloaddition reactions between pyrido[2,1-a]isoindole (PIS) and acetylene or ethylene derivatives. They are indolizino[3,4,5-ab]isoindoles 2-9 and 14-15, benzo[1',2'-1,2]indolizino[3,4,5-ab]isoindoles 10, pyridazino[4',5':1,2]indolizino[3,4,5-ab]isoindoles 12-13, and 2,3-hydropyridazino[4',5':1,2]indolizino[3,4,5-ab]isoindole-1,4-dione 11. The relative luminescence quantum yield can be as high as 90%. Their reduction and oxidation potentials and high luminescence can make these heterocycles possible alternatives to tris(8-hydroxyquinolinato)aluminum (Alq(3)). The brightness of the light-emitting device reached as high as 10(4) cd/m(2) and indolizino[3,4,5-ab]isoindole 3 emits beautifully blue light. The X-ray crystal structures of INI derivatives were obtained for the first time. The geometries obtained from X-ray data and density functional theory calculations shed more light on an interesting formally antiaromatic 16pi system, which is divided into 10pi and 6pi aromatic systems. We also report a relatively easy protonation of INI, which occurs at a carbon, rather than nitrogen atom.

Vapour diffusion hydrolysis of a self-assembled silylated organogel, the OG-HG transcription process: a new way to cast and handle fluorescent silsesquioxane.

A new method of hydrolysis-polycondensation of silsesquioxanes, the OG-HG (Organo Gel-Hybrid Gel or Organised Gel-Hydrolysed Gel) process allows the transcription of the supramolecular architecture of organogels to corresponding hybrid silsesquioxanes.