RESUMEN
Nanoliposomes are widely used as delivery vehicles for active compounds. Nanoliposomes from rapeseed phospholipids were incorporated into interpenetrating polymer network hydrogels of gelatin methacryloyl and alginate. The multiscale physicochemical properties of the hydrogels are studied both on the surface and through the thickness of the 3D network. The obtained composite hydrogels exhibited strong mechanical properties and a highly porous surface. The blend ratio, as well as the concentration of nanoliposomes, affects the properties of the hydrogels. Nanofunctionalized hydrogels induced keratinocyte âgrowth. These advantageous characteristics may open up many applications of the developed hydrogels in drug delivery and tissue engineering.
RESUMEN
Emulsion-based delivery systems have been developed to increase the topical bioavailability of lipophilic active compounds within skin membrane. The aim was to develop nanoemulsion from natural sources (rapeseed oil) with the same sources of pure phospholipids (lecithin) rich on mono and polyunsaturated fatty acids for encapsulation of hydrophobic antioxidant (Coenzyme Q10) giving nanoemulsion with double functionality. Nanoemulsions were used for cream preparation using xanthan gum and carboxylmethylcellulose as texturizing agents. The physico-chemical properties, toxicity and biocompatibility were evaluated. Physical stability was followed under different storage temperatures (25; 37 and 50⯰C) for one month and revealed stable systems with 150â¯nm particle size. Anionic thickening addition influenced the electrophoretic mobility but not the size distribution. The addition of polyanionic thickening in nanoemulsions promoted negative surface charge that increased electrostatic repulsive forces between droplets avoiding destabilization phenomena such as coalescence and Ostwald ripening. Moreover, chemical stability evaluation of components confirmed the absence of interactions. FTIR analysis indicated the vibration band position of cis double stretching of unsaturated fatty acids between 3009 and 3006â¯cm-1, which characterized the non-oxidized oils with same intensities before and after sonication. Antioxidants measurement shown that CMC significantly reduced antioxidant activity due to masking action of CoQ10 functional groups by the carboxylmethylcellulose gum conversely to xanthan gum addition. Finally, in vitro biocompatibility results shown that CoQ10 protected the DNA, and xanthan gum improve glucose metabolism inducing a better cell growth, while carboxymethylcellulose which was not metabolized by fibroblast cell inducing lower growth rate.
Asunto(s)
Emulsiones/química , Nanopartículas/química , Tensoactivos/química , Ubiquinona/análogos & derivados , Disponibilidad Biológica , Células Cultivadas , Sistemas de Liberación de Medicamentos/métodos , Estabilidad de Medicamentos , Almacenaje de Medicamentos , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Piel/citología , Piel/metabolismo , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Temperatura , Ubiquinona/administración & dosificación , Ubiquinona/química , Ubiquinona/farmacocinéticaRESUMEN
To improve the encapsulation and release of coenzyme Q10 (CoQ10), emulsifier-free-emulsions were developed with a new emulsification process using high-frequency ultrasound (HFU) at 1.7MHz. Nano-emulsions containing CoQ10 were prepared with or without rapeseed lecithin as an emulsifier. The emulsions prepared with HFU were compared with an emulsion of CoQ10 containing emulsifier prepared with the same emulsification technique as well as with emulsions prepared with low-frequency ultrasound coupled with high-pressure homogenization (LFU+HPH). The physico-chemical properties of the emulsions were determined by average droplet size measurement with nano-droplet tracking analysis, droplet surface charge with ζ potential measurement, surface tension and rheological behaviour. Emulsions made by LFU+HPH with an emulsifier showed lower droplet sizes due to cavitation generated by the HFU process. Surface tension results showed that there was no significant difference between emulsions containing lecithin emulsifier regardless of the preparation process or the inclusion of CoQ10. In vitro biocompatibility tests were performed on human mesenchymal stem cells in order to show the cytotoxicity of various formulations and the efficiency of CoQ10-loaded emulsions. In vitro tests proved that the vectors were not toxic. Furthermore, CoQ10 facilitated a high rate of cell proliferation and metabolic activity especially when in an emulsifier-free formulation.
Asunto(s)
Brassica rapa/química , Sistemas de Liberación de Medicamentos , Emulsionantes/química , Emulsiones , Lecitinas/química , Células Madre Mesenquimatosas/metabolismo , Ubiquinona/análogos & derivados , Células Cultivadas , Química Farmacéutica , Humanos , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/efectos de la radiación , Tensoactivos/química , Ubiquinona/química , Ubiquinona/metabolismo , UltrasonidoRESUMEN
Surface composition of dairy powders influences significantly a quantity of functional properties such as rehydration, caking, agglomeration. Nevertheless, the kinetic of water uptake by the powders was never directly related to the structure and the composition of the surface. In this work, the effect of relative humidity on the structural reorganization of two types of dairy powder was studied. The water-powder interaction for industrial whole milk powder, and skim milk powder was studied using dynamic vapor sorption. The water sorption isotherms were fitted with a Brunner-Emmet-Teller model and each stage of the sorption curve was analyzed with a Fickian diffusion. The water content in the monolayer predicted for each powder and the moisture diffusivity calculated were discussed and compared. Concurrently, powders microstructure and powders surface under variable relative humidity were assessed by X-ray photoelectron spectroscopy, scanning electron microscopy coupled with energy dispersive X-ray and atomic force microscopy. A correlation between the data obtained from the sorption isotherms and the modifications of structure allowed us to conclude that powder microstructure and chemical state of the components could play an important role in determining the water diffusivity.
Asunto(s)
Productos Lácteos/análisis , Tamaño de la Partícula , Agua/química , Adsorción , Difusión , Humedad , Cinética , Microscopía de Fuerza Atómica , Microscopía Electrónica de Rastreo , Polvos , Propiedades de Superficie , TemperaturaRESUMEN
Testing the specific migration limits of all substances intentionally added to polymer material according to European Union (EU) regulation is a time-consuming and expensive task. Although mathematical modeling offers an interesting alternative, it can significantly overestimate the migration in situations which are strongly conservative due to significant uncertainty in transport properties. In addition, its application is of little use for end-users or enforcement laboratories, which do not have access to the formulation. This paper revises the paradigm of migration modeling by combining modeling with deformulation experiments and iterative modeling in the framework of decision theory. The complete approach is illustrated for polyolefins in contact with 50% ethanol for eight typical migrants, including hindered phenolic antioxidants and low molecular weight surrogates. Results from a French ACTIA project on the identification of formulation fingerprints and on the prediction of partition coefficients with alcoholic and aqueous stimulants is described. When the true migration was close but still lower than the limit of concern, the proposed compact decision tree, including up to four sources of uncertainty, showed that the chance of demonstrating compliance was about 3 : 4 in the presence of one source of uncertainty, whereas it fell below 2 : 4 and 1 : 4 with two and three sources of uncertainty, respectively. The recommendations for further food packaging safety surveys and future developments are discussed.
Asunto(s)
Contaminación de Alimentos/análisis , Embalaje de Alimentos/normas , Plásticos/química , Seguridad de Productos para el Consumidor , Árboles de Decisión , Difusión , Humanos , Modelos Químicos , Medición de Riesgo/métodosRESUMEN
Handling and storage alter infant food powders due to lactose crystallization and interactions among components. Model infant foods were prepared by colyophilization of lactose, beta-lactoglobulin (beta-LG), and gelatinized starch. A mixture design was used to define the percentage of each mixture component to simulate a wide range of infant food powders. The kinetics of crystallization was studied by a gravimetric method (dynamic vapor sorption) at 70% relative humidity (RH). After freeze-drying, lactose was amorphous and crystallized at 70% RH. The delay before crystallization depends on the contents of beta-LG and starch in the formulations. A mathematical model was proposed to predict crystallization time (delay) at 70% RH. For the formulation containing 50% lactose, 25% beta-LG, and 25% starch, lactose was still amorphous after 42 h at 70% RH, whereas pure amorphous lactose crystallized after approximately 70 min. Calculated and experimental results of adsorbed moisture from the formulations were compared. Adsorbed water of formulation containing lactose could not be calculated from moisture sorption properties of each component at a given RH because beta-LG and gelatinized starch prevented lactose crystal growth.
Asunto(s)
Fórmulas Infantiles/química , Lactosa/química , Modelos Químicos , Cristalización , Humedad , Cinética , Lactoglobulinas/química , Microscopía Electrónica de Rastreo/métodos , Almidón/química , Factores de Tiempo , Agua/química , Agua/metabolismoRESUMEN
Calcium is a mineral essential for humans, especially for bone constitution. Yet most of the worldwide population does not satisfy their Ca needs. Hence, Ca supplementation is of major importance, even in western countries where some specific populations at risk do not satisfy the recommended daily intake of Ca. More than 70% of dietary Ca comes from dairy products. Calcium supplementation of naturally Ca-rich sources such as skim milk is then of special interest. To our knowledge, few data are available concerning milk Ca (MC) supplementation of milk, particularly when followed by pH cycle. In this paper, MC supplementation is studied and compared with Ca chloride (CC) supplementation as a well-known source of Ca. The effect of Ca salt supplementation followed by pH cycle was studied in reconstituted skim milk. Calcium supplementation was carried out with CC and MC at 25 mmol of Ca/kg of skim milk. Ionized Ca concentration and turbidity variations were followed in situ by Ca ion selective electrode and turbidimetry using light reflection. From normalized data on ionized Ca concentration and turbidity vs. pH, it appeared that hysteresis areas were smaller for CC-supplemented milk, whereas unsupplemented milk and MC-supplemented milk behaved similarly. For these 3 dairy systems, pH cycles to pH 5.0 led to a larger hysteresis area than pH cycles to pH 5.5. The shrinkage of the hysteresis area could be interpreted as a reinforcement of casein micelles with Ca ions over the pH cycle.
Asunto(s)
Cloruro de Calcio/análisis , Calcio/análisis , Alimentos Fortificados , Concentración de Iones de Hidrógeno , Leche/química , Animales , Calcio/química , Cloruro de Calcio/química , Coloides/análisis , Alimentos Fortificados/análisis , Factores de TiempoRESUMEN
A simplified method to study rehydration was used on different dairy powders. The method involved dispersing powder in a stirred vessel equipped with a turbidity sensor. The changes of turbidity occurring during powder rehydration highlighted the rehydration stage, and the influence of the proteins' state on rehydration was clarified. Casein powders had a quick wetting time but very slow dispersion, making the total rehydration process time-consuming. On the other hand, whey powders were found to have poor wettability but demonstrated immediate dispersion after wetting. Mixing casein (80%) and whey (20%) before spray drying greatly improved rehydration time compared with casein powder; whereas mixing whey powder with casein powder at the same ratio after spray drying caused a dramatic deterioration in the rehydration properties. Moreover, agglomeration was found to significantly improve the rehydration time of whey protein powder and to slow down the rehydration time of casein powder. These opposite effects were related to the rate-controlling stage (i.e., wetting stage for whey protein and dispersion stage for casein).
Asunto(s)
Caseínas/química , Conservación de Alimentos , Proteínas de la Leche/química , Leche/química , Animales , Fenómenos Químicos , Química Física , Nefelometría y Turbidimetría , Tamaño de la Partícula , Polvos , Agua , Proteína de Suero de LecheRESUMEN
Lactose crystallization and color changes in formulas containing beta-lactoglobulin and gelatinized starch were investigated. Model infant formulas were prepared by colyophilization of 3 components (lactose, beta-lactoglobulin, and gelatinized starch). A mixture design was used to choose the percentage of each mixture component. These formulas were stored for 3 mo at different relative humidities (RH), ranging from approximately 0 to 94.6%, to study the lactose crystallization and color changes. Crystallization kinetics was studied by gravimetric methods, and lactose state (crystalline vs. amorphous) was verified before and after storage by differential scanning calorimetry. Before storage, lyophilized lactose was amorphous, but during storage it crystallized, depending on the RH. The lactose crystallization RH depended on the quantity of beta-lactoglobulin and gelatinized starch, and by increasing these quantities, the crystallization RH increased. For some formulas, the crystallization RH was noted at 3 different RH during storage. The first was noted after 1 d of storage and the second and third were observed later on, showing that crystallization is a time-dependent phenomenon. Nonenzymatic browning was studied in model infant formulas by yellow color changes of samples at 11.3, 43.2, 54.5, and 75.4% RH. In this study, 7 mathematical models were proposed to predict the moisture sorption properties and color changes at different RH, and the models were validated by experimental results.
Asunto(s)
Alimentos Infantiles/análisis , Lactosa/química , Adsorción , Color , Cristalización , Fórmulas Infantiles/química , Cinética , Lactoglobulinas/farmacología , Reacción de Maillard , Modelos Químicos , Almidón/farmacología , Termodinámica , Agua/químicaRESUMEN
The surface composition of three dairy powders was investigated by X-ray photoelectron spectroscopy. These spray-dried casein powders were more or less enriched in hygroscopic material (lactose and/or minerals). The principal limitation of these high protein content powders is their poor rehydration ability. Consequently, information about surface composition is required in order to get a better understanding of rehydration behaviour (i.e. wetting time and time of rehydration). The obtained results indicate that the surface of the three powders was dominated by proteins. Lactose and minerals are marginal compounds at the surface whereas the surface coverage of fat was over represented. A correlation between the lactose surface content and the wetting time of the powders was found, but no relationship with the surface fat. Moreover, as the surface is partly depleted in minerals and lactose, it is concluded that these compounds are principally located in the bulk of the particle. Therefore this observation could be related with a wetting time of the powders only slightly affected by the addition of hygroscopic material whereas the time of rehydration was strongly improved; powder wetting being more affected by the surface composition whereas powder dispersion being more influenced by the powder bulk composition.
Asunto(s)
Caseínas/química , Electrones , Lactosa/química , Minerales/química , Tamaño de la Partícula , Polvos/química , Sensibilidad y Especificidad , Análisis Espectral , Propiedades de Superficie , Factores de Tiempo , Agua/química , Humectabilidad , Rayos XRESUMEN
The objective of this study was to evaluate the presence or absence of interaction between lactose and beta-lactoglobulin during storage of model whey powders at different water activities (a(w)). Model whey powders were prepared by colyophilization of lactose with increasing quantities of beta-lactoglobulin. These colyophilized beta-lactoglobulin:lactose powders, assigned as BL powders, were stored from 0.11 to 0.95 a(w). The water sorption behavior of BL powders was studied gravimetrically, and the state of lactose was investigated using differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Before storage, BL powders were amorphous. After storage, a loss of water was observed on moisture sorption isotherms of BL powders. It was related to the formation of lactose crystals, detected by DSC and SEM analysis, and to the structural collapse of the powders. Water loss due to lactose crystallization was shifted to higher a(w) with increasing beta-lactoglobulin content in BL powders. Moreover, kinetics of moisture sorption demonstrated that beta-lactoglobulin was also responsible for a slower crystallization process in BL powders. Then, the water sorption behavior of BL powders was very different from the behavior of the 2 compounds mixed after separate lyophilization. All these results pointed out interaction between lactose and beta-lactoglobulin, which appeared during lyophilization and still occurred during storage. This lactose/beta-lactoglobulin interaction stabilized model whey powders against lactose crystallization.
Asunto(s)
Conservación de Alimentos , Lactoglobulinas/química , Lactosa/química , Proteínas de la Leche/química , Adsorción , Rastreo Diferencial de Calorimetría , Cristalización , Interacciones Farmacológicas , Liofilización , Cinética , Lactoglobulinas/análisis , Lactosa/análisis , Microscopía Electrónica de Rastreo , Agua/análisis , Agua/química , Proteína de Suero de LecheRESUMEN
The flow properties of sodium caseinate (NaCAS) film-forming dispersions were studied as a function of protein and glycerol concentration. Apparent viscosity vs. concentration profiles showed a disruption at about 10% (wt/wt) NaCAS. This was interpreted in terms of protein-water and protein-protein interactions. The presence of glycerol in the NaCAS film-forming suspensions reduced the viscosity of aqueous NaCAS as a consequence of decreasing protein-protein and protein-solvent interactions through the hydrogen bonding formation between the glycerol, the polypeptide chain of NaCAS, and water molecules. For higher concentration of glycerol, viscosity of NaCAS dispersions increased as a result of increasing total solid content. The glass transition temperature for solid films of 10% (wt/wt) NaCAS decreased with the glycerol content. The glycerol-protein interactions reduced the protein-protein interaction and, thus, increased the intermolecular spacing, leading to higher protein chain mobility and water vapor permeability.
Asunto(s)
Caseínas/química , Embalaje de Alimentos , Fenómenos Químicos , Química Física , Electroforesis en Gel de Poliacrilamida , Glicerol/análisis , Glicerol/química , Enlace de Hidrógeno , Proteínas/química , Solventes/química , Temperatura , Viscosidad , AguaRESUMEN
Food contamination can result from various interactions between food and packaging materials. Migration of volatiles, additives, monomers and oligomers from packaging materials into food or adsorption of volatile compounds from the food by the polymer are important considerations from safety, hygienic and economic points of view. The term 'migration' includes two phenomena (partition and diffusion) that can be important in determining the concentration of contaminants in a food system at any time. An estimation of the partition coefficient, K, in food/packaging systems has been the major objective of numerous different studies. Various parameters can influence K such as temperature, pH, the chemical structure of the migrant, molecular size and structure, fat content, and degrees of crystallinity. Some theoretical approaches such as the quantitative structure-property relationship method could be of interest in the near future.
Asunto(s)
Contaminación de Alimentos/análisis , Embalaje de Alimentos , Plásticos/química , Grasas de la Dieta/análisis , Difusión , Análisis de los Alimentos/métodos , Humanos , Peso Molecular , Relación Estructura-Actividad , TemperaturaRESUMEN
Beta-carotene acts as a pro-vitamin A or anti-cancer compound. Carrots contain the highest amount of beta-carotene of common fruits and vegetables, but each year 25% of carrot production is lost in the U.S. during processing and storage, while, at the same time, the market demand increases. This article is a review of the most recent studies concerning beta-carotene retention in carrots during processing and storage. Reducing the water activity by adding some aw lowering ingredients results in poor shelf-life. Drying or freezing gives better retention during storage than reducing the water activity, if the process is well controlled. Canning or freeze-drying were shown to be more effective. The trans form of beta-carotene in carrots is replaced by the cis form during processing. Beta-Carotene can be extracted from carrots, but the half-life of free beta-carotene is reduced to 2 d in the juice extract at room temperature. By encapsulation methods,the half-life can be increased by 6 months.
Asunto(s)
Daucus carota/metabolismo , Manipulación de Alimentos/métodos , beta Caroteno/farmacocinética , Daucus carota/química , Estabilidad de Medicamentos , Tecnología de Alimentos/tendencias , SemividaRESUMEN
This article reviews the various theories of adhesion mechanism and, more specifically, studies concerning foodstuffs adhesion to industrial equipment and packaging surfaces. Adhesion is governed by mechanical interlocking, wetting, electrostatic and chemical forces, and diffusion. Direct conclusions about the validity of one of these theories were seldom made in the empirical studies reviewed. The different food adhesion determination methods were detailed: direct observations, evaluations (weighting, UV absorbance, and adhesive loss), adhesion strength measurements, and indirect measurements via the wetting theory (tilted plane method, contact angle, and surface tension). The importance of proteins, product rheological properties, solid surface rugosity, and wetting phenomena in many adhesion cases is highlighted. Conclusions were made that fundamental mechanisms of food-contact surfaces interactions still need to be investigated to improve understanding in the science of food materials.