Real-time variations in body temperature of laying hens with increasing ambient temperature at different relative humidity levels.

In order to measure the real-time variations in body temperature with increasing ambient temperature (AT) at different relative humidity (RH) levels, 60 Jinghong laying hens (35-wk-old) were raised in 3 controlled climate chambers (10 cages with 2 birds per chamber). The RH was fixed at one of 3 levels comprising 35, 50, or 85%, and the AT was increased gradually by 1 degree per 0.5 h from 18 to 35°C in the 3 chambers. The core temperature (CT) and surface temperature (ST) of the hens, as well as the AT in the 3 chambers were recorded at 3 min intervals using mini temperature data loggers. The data were analyzed with a broken-line model to determine the inflection point temperature (IPT, the certain AT above which the body temperature of the hens started to change). The experiment was repeated 3 times on 3 d. The IPTs of the laying hens were 23.89 and 25.46°C based on ST and CT at 50% RH, respectively, which indicated that the upper critical temperature of the thermoneutral zone of hens may be a specific temperature between 23.89°C and 25.46°C. The IPTs of the laying hens were 24.11 and 25.20°C based on ST and CT at RH 35%, respectively, and 21.93 and 24.45°C at RH 85%. The RH significantly affected the IPT of ST (P < 0.001). The IPTs were higher at 35 and 50% RH than that at 85% RH (P < 0.05). The coefficients of variation for the IPTs between individual hens were 2.96 to 4.51, and coefficients of variation for the IPTs for the same bird measured on 3 d were 0.69 to 1.59, thereby indicating that this method for estimating the IPTs of hens is stable and repeatable, although more samples are needed. In conclusion, our results indicate that analyzing the real-time variation in body temperature with increasing AT is a reliable method for estimating the IPT to provide an important reference for regulating the temperature in poultry houses.

Photochemically crosslinked collagen annulus plug: a potential solution solving the leakage problem of cell-based therapies for disc degeneration.

Intra-disc injection of mesenchymal stem cells (MSCs) to treat disc degeneration may lead to unfavorable complications, particularly osteophyte formation. Development of an effective method to block the injection portal, prevent the leakage of injected cells and materials and, hence, prevent osteophyte formation is of the utmost importance before MSC-based therapies can be applied in a clinical setting. Here we seek to alleviate the cell leakage problem and the associated complication osteophyte formation by developing an injectable annulus plug to block the injection portal during intra-disc delivery. Specifically, we fabricated a needle-shaped collagen plug by photochemical crosslinking and successfully delivered it intra-discally, in association with MSCs in collagen microsphere carriers, using a custom-made delivery device. The mechanical performance of the plug and its effectiveness in reducing cell leakage were evaluated ex vivo under compression and in torsion push-out tests. The results demonstrate that the plug survived physiologically relevant loadings and significantly reduced leakage and enhanced retention of the injected materials. Finally, a pilot in vivo study in rabbits was conducted to evaluate the performance of the plug. Microcomputed tomography imaging and histology revealed that the plug significantly reduced osteophyte formation. This work suggests the potential of the annulus plug as an adjunct or annulus closure device for intra-disc delivery of cells and materials.