RESUMEN
Due to the semi-arid nature of Makueni County in South-Eastern Kenya, there is a high dependence on groundwater resources for domestic use. Reliance on this source of potable water may have health implications for the population, given the presence of several naturally occurring and potentially harmful elements reported from aquifer source rocks, soil, and water in the area. A survey involving questionnaires and focus group discussions (FGDs) was conducted with 115 individuals to determine the local population's knowledge, attitude, and perceptions of their drinking water quality and its health impacts. The results show that most respondents (67%) preferred piped water because it was pre-treated and not saline. Only 29% of the respondents were very satisfied with the taste of their drinking water, while the rest complained about varying salinity levels, ranging from slightly salty to very salty. This low satisfaction might have influenced the low daily drinking water consumption (1-2 L) by most respondents. Health issues reported by many (43%) respondents in the area include diarrhoea and gastrointestinal upsets, which may be associated with the saline nature of the drinking water. Elevated fluoride (F-) in the local groundwater was reported, and the health effects remain a concern. Although 91% knew someone with dental fluorosis, 53% did not know the deleterious effects of high F- in drinking water. Most respondents (59%) associated the salty nature of the water with dental fluorosis, and as a result, 48% avoided drinking the salty water to prevent the condition. Despite the high prevalence and known psycho-social effects, most people did not perceive dental fluorosis as a severe health threat. The increased health risks associated with high salinity and high F- in drinking water in Makueni County are poorly understood by most residents, regardless of their education, gender, or age. This warrants an immediate public health education programme and detailed epidemiological studies to determine all the health effects associated with naturally occurring, potentially harmful elements in groundwater in the area.
Asunto(s)
Agua Potable , Fluorosis Dental , Agua Subterránea , Fluoruros/análisis , Fluorosis Dental/epidemiología , Humanos , Kenia/epidemiología , PercepciónRESUMEN
Makueni County, located in south-eastern Kenya, faces challenges such as limited potable water and restricted food supplies as the result of semi-aridity. High fluoride (F) concentrations have been reported in drinking water with resultant dental fluorosis affecting the local population. To determine the potential F exposure through the consumption of food crops grown in the area, F concentration was assessed in the main five locally grown and consumed crops. Additionally, the water-soluble F fraction was determined from 30 soil samples with mineralogical determination of 20 samples. Mean F concentration in the food crops was in the order; 700, 288, 71.2, 36.6, and 29 mg/kg in kale, cowpeas leaves, green grams, cowpeas (legume portion), and maize, respectively. The F concentration in farm soils ranged from 0 to 3.47 mg/kg (mean of 0.87 mg/kg) and showed a significant strong positive correlation (p = 0.03, r = 0.89) with F values in the crops. Apatite, muscovite, and biotite were identified as the F-rich minerals present. While considering two hypothetical F absorption fractions (75 and 100%), the estimated average daily dose (EADD) of F from consuming the crops ranged between 0.004 and 65.17 mg/kg/day where the highest values were from the vegetables. Most of these values were higher than the F reference dose (RfD) of 0.06 mg/kg. The estimated EADD values of several hypothetical meals prepared from the analyzed crops revealed that steamed kale and maize porridge pose the highest health risk of F associated diseases to the local population, whereas boiled cowpeas pose no health risk. Children, due to their higher daily energy requirement and low body weight, were the most vulnerable group at risk of high daily F intake relative to the RfD. These results suggest that consumption of the analyzed food crops in Makueni County may significantly contribute to F related diseases in the local population. This creates a food security issue for the area because of the potential health risks associated with these crops which are highly relied upon in the semi-arid area with a limited selection of food crops available and viable to grow.
Asunto(s)
Agua Potable , Fluorosis Dental , Niño , Humanos , Fluoruros/análisis , Suelo , Kenia , Verduras , Productos Agrícolas , Fluorosis Dental/epidemiología , Fluorosis Dental/etiologíaRESUMEN
Compared to other countries, the COVID-19 pandemic did not severely affect Australia as measured by total deaths until mid-2021. Though a substantial number of daily confirmed cases (up to 698) were reported during the second wave, most of them were from the southern state of Victoria. This study examined the possible correlations between climate variables and the number of daily confirmed COVID-19 cases in Victoria, Australia, from 25 January to 31 October 2020. Appropriate regression models and cross-correlation diagnostics were used to examine the effect of temperature, rainfall, solar exposure, and ultraviolet index (UVI) with the number of daily confirmed cases. Significant positive associations were identified for solar exposure and maximum and average UVI for confirmed cases one and 19 days later. Negative associations for these variables were found for confirmed cases five days later. Minimum temperature had a significant negative correlation one day later and a positive effect 21 days later. No significant correlation was found for maximum temperature and rainfall. The most significant relationships were found for confirmed cases 19 days after changes in the meteorological variables. A 1% increase in solar exposure, maximum UVI, and average UVI was associated with a 0.31% (95% CI: 0.13 to 0.51), 0.71% (95% CI: 0.43 to 0.98), and 0.63% (95%CI: 0.20 to 1.61) increase 19 days later in the number of confirmed cases, respectively. The implications of these results can be used in the public health management of any possible future events in Australia. It also highlights the significance of considering the climatic variables and seasonality in all kinds of epidemics and pandemics.
Asunto(s)
COVID-19 , Pandemias , Humanos , SARS-CoV-2 , Victoria/epidemiología , Tiempo (Meteorología)RESUMEN
Pathogen transfer and infection in the built environment are globally significant events, leading to the spread of disease and an increase in subsequent morbidity and mortality rates. There are numerous strategies followed in healthcare facilities to minimize pathogen transfer, but complete infection control has not, as yet, been achieved. However, based on traditional use in many cultures, the introduction of copper products and surfaces to significantly and positively retard pathogen transmission invites further investigation. For example, many microbes are rendered unviable upon contact exposure to copper or copper alloys, either immediately or within a short time. In addition, many disease-causing bacteria such as E. coli O157:H7, hospital superbugs, and several viruses (including SARS-CoV-2) are also susceptible to exposure to copper surfaces. It is thus suggested that replacing common touch surfaces in healthcare facilities, food industries, and public places (including public transport) with copper or alloys of copper may substantially contribute to limiting transmission. Subsequent hospital admissions and mortality rates will consequently be lowered, with a concomitant saving of lives and considerable levels of resources. This consideration is very significant in times of the COVID-19 pandemic and the upcoming epidemics, as it is becoming clear that all forms of possible infection control measures should be practiced in order to protect community well-being and promote healthy outcomes.
RESUMEN
The foremost mortality-causing symptom associated with COVID-19 is acute respiratory distress syndrome (ARDS). A significant correlation has been identified between the deficiency in vitamin D and the risk of developing ARDS. It has been suggested that if we can reduce or modify ARDS in COVID-19 patients, we may significantly reduce the severity of COVID-19 symptoms and associated mortality rates. The increased mortality of dark-skinned people, who have a reduced UV absorption capacity, may be consistent with diminished vitamin D status. The factors associated with COVID-19 mortality, such as old age, ethnicity, obesity, hypertension, cardiovascular diseases, and diabetes, are all found to be linked with vitamin D deficiency. Based on this review and as a precautionary measure, it is suggested that the adoption of appropriate and safe solar exposure and vitamin D enriched foods and supplements should be considered to reduce the possible severity of COVID-19 symptoms. Safe sun exposure is deemed beneficial globally, specifically in low and middle-income countries, as there is no cost involved. It is also noted that improved solar exposure and vitamin D levels can reduce the impact of other diseases as well, thus assisting in maintaining general human well-being.
Asunto(s)
COVID-19/terapia , Luz Solar , Vitamina D/uso terapéutico , COVID-19/prevención & control , Humanos , Síndrome de Dificultad Respiratoria/prevención & control , Síndrome de Dificultad Respiratoria/terapia , Deficiencia de Vitamina D/epidemiología , Deficiencia de Vitamina D/prevención & controlRESUMEN
Exposure studies have linked arsenic (As) ingestion with disease in mining-affected populations; however, inhalation of mine waste dust as a pathway for pulmonary toxicity and systemic absorption has received limited attention. A biologically relevant extractant was used to assess the 24-h lung bioaccessibility of As in dust isolated from four distinct types of historical gold mine wastes common to regional Victoria, Australia. Mine waste particles less than 20 µm in size (PM20) were incubated in a simulated lung fluid containing a major surface-active component found in mammalian lungs, dipalmitoylphosphatidylcholine. The supernatants were extracted, and their As contents measured after 1, 2, 4, 8 and 24 h. The resultant As solubility profiles show rapid dissolution followed by a more modest increasing trend, with between 75 and 82% of the total 24-h bioaccessible As released within the first 8 h. These profiles are consistent with the solubility profile of scorodite, a secondary As-bearing phase detected by X-ray diffraction in one of the investigated waste materials. Compared with similar studies, the cumulative As concentrations released at the 24-h time point were extremely low (range 297 ± 6-3983 ± 396 µg L-1), representing between 0.020 ± 0.002 and 0.036 ± 0.003% of the total As in the PM20.
Asunto(s)
Arsénico/química , Polvo/análisis , Oro , Residuos Industriales/análisis , Pulmón/química , Minería , Modelos Biológicos , Arsénico/farmacocinética , Disponibilidad Biológica , Líquidos Corporales/química , Humanos , Técnicas In Vitro , Tamaño de la Partícula , Reproducibilidad de los Resultados , Solubilidad , Victoria , Difracción de Rayos XRESUMEN
Prescribed fire conducted in fire-prone areas is a cost-effective choice for forest management, but it also affects many of the physicochemical and bio-geological properties of the forest soil, in a similar manner to wild fires. The aim of this study is to investigate the nature of the mercury mobilization after a prescribed fire and the subsequent temporal changes in concentration. A prescribed fire was conducted in a legacy mine site in Central Victoria, Australia, in late August 2015 and soil sample collection and analyses were carried out two days before and two days after the fire, followed by collection at the end of each season and after an intense rainfall event in September 2016. Results revealed the occurrence of mercury volatilization (8.3-97%) during the fire, and the mercury concentration displayed a significant difference (p < 0.05) before and immediately after the fire. Integrated assessment with number of pollution indices has shown that the study site is extremely contaminated with mercury during all the sampling events, and this poses a serious ecological risk due to the health impacts of mercury on human and ecosystems. In times of climate fluctuation with concomitant increase in forest fire (including prescribed fire), and subsequent precipitation and runoff, the potential for an increased amount of mercury being mobilized is of heighted significance. Therefore, it is recommended that prescribed fire should be cautiously considered as a forest management strategy in any mercury affected landscapes.
Asunto(s)
Incendios , Mercurio/análisis , Minería , Lluvia , Contaminantes del Suelo/análisis , Ecosistema , Contaminación Ambiental/análisis , Contaminación Ambiental/prevención & control , Humanos , Suelo/química , Victoria , VolatilizaciónRESUMEN
The environmental impact of toxic metal contamination from legacy mining activities, many of which had operated and were closed prior to the enforcement of robust environmental legislation, is of growing concern to modern society. We have carried out analysis of As and potentially toxic metals (Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, and Zn) in the surface soil of a legacy gold mining site in Maldon, Victoria, Australia, to reveal the status of the current metal concentration. The results revealed the median concentrations of metals from highest to lowest, in the order: Mn > Zn > As > Cr > Cu > Pb > Ni > Co > Hg > Cd. The status of site was assessed directly by comparing the metal concentrations in the study area with known Australian and Victorian average top soil levels and the health investigation levels set by the National Environmental Protection Measures (NEPM) and the Department of Environment and Conservation (DEC) of the State of Western Australia. Although, median concentrations of As, Hg, Pb, Cu and Zn exceeded the average Australian and Victorian top soil concentrations, only As and Hg exceeded the ecological investigation levels (EIL) set by DEC and thus these metals are considered as risk to the human and aquatic ecosystems health due to their increase in concentration and toxicity. In an environment of climate fluctuation with increased storm events and forest fires may mobilize these toxic metals contaminants, pose a real threat to the environment and the community.
Asunto(s)
Metales Pesados/análisis , Contaminantes del Suelo/análisis , Ecosistema , Monitoreo del Ambiente , Humanos , Metales Pesados/toxicidad , Minería , Suelo/química , Contaminantes del Suelo/toxicidad , VictoriaRESUMEN
Conducting controlled burns in fire prone areas is an efficient and economic method for forest management, and provides relief from the incidence of high severity wild fires and the consequent damage to human property and ecosystems. However, similar to wild fires, controlled burns also affect many of the physical and biogeochemical properties of the forest soil and may facilitate remobilization of potentially toxic elements (PTEs) sequestered in vegetation and soil organic matter. The objective of the current study is to investigate the mobilization of PTEs, in Central Victorian forest soils in Australia after a controlled burn. Surface soil samples were collected two days before and after the controlled burn to determine the concentration of PTEs and to examine the physicochemical properties. Results show that As, Cd, Mn, Ni and Zn concentrations increased 1.1, 1.6, 1.7, 1.1 and 1.9 times respectively in the post-burn environment, whereas the concentrations of Hg, Cr and Pb decreased to 0.7, 0.9 and 0.9 times respectively, highlighting considerable PTE mobility during and after a controlled burn. Whilst these results do not identify very strong correlations between physicochemical properties of soil and PTEs in the pre- and post-burn environments, PTEs themselves demonstrated very strong and significant correlations. The mobilization of As, Hg and other toxic elements raise potential health concerns as the number of controlled burns are projected to increase in response to climate change. Due to this increased level of PTE release and remobilization, the use of any kinds of controlled burn must be carefully considered before being used as a forest management strategy in mining-affected landscapes which include areas with high PTE concentrations.
Asunto(s)
Monitoreo del Ambiente , Minería , Contaminantes del Suelo/análisis , Suelo/química , Incendios , Agricultura Forestal/métodos , VictoriaRESUMEN
One of the significant economic benefits to communities around the world of having pristine forest catchments is the supply of substantial quantities of high quality potable water. This supports a saving of around US$ 4.1 trillion per year globally by limiting the cost of expensive drinking water treatments and provision of unnecessary infrastructure. Even low levels of contaminants specifically organics and metals in catchments when in a mobile state can reduce these economic benefits by seriously affecting the water quality. Contamination and contaminant mobility can occur through natural and anthropogenic activities including forest fires. Moderate to high intensity forest fires are able to alter soil properties and release sequestered metals from sediments, soil organic matter and fragments of vegetation. In addition, the increase in post-fire erosion rate by rainfall runoff and strong winds facilitates the rapid transport of these metals downslope and downstream. The subsequent metal deposition in distal soil and water bodies can influence surface water quality with potential impacts to the larger ecosystems inclusive of negative effects on humans. This is of substantial concern as 4 billion hectares of forest catchments provide high quality water to global communities. Redressing this problem requires quantification of the potential effects on water resources and instituting rigorous fire and environmental management plans to mitigate deleterious effects on catchment areas. This paper is a review of the current state of the art literature dealing with the risk of post-fire mobilization of the metals into surface water resources. It is intended to inform discussion on the preparation of suitable management plans and policies during and after fire events in order to maintain potable water quality in a cost-effective manner. In these times of climate fluctuation and increased incidence of fires, the need for development of new policies and management frameworks are of heighted significance.
RESUMEN
Solid co-microcapsules of omega-3 rich tuna oil and probiotic bacteria L. casei were produced using whey protein isolate-gum Arabic complex coacervate as wall material. The in-vitro digestibility of the co-microcapsules and microcapsules was studied in terms of survival of L. casei and release of oil in sequential exposure to simulated salivary, gastric and intestinal fluids. Co-microencapsulation significantly increased the survival and surface hydrophobicity and the ability of L. casei to adhere to the intestinal wall. No significant difference in the assimilative reduction of cholesterol was observed between the microencapsulated and co-microencapsulated L. casei. The pattern of release of oil from the microcapsules and co-microcapsules was similar. However, the content of total chemically intact omega-3 fatty acids was higher in the oil released from co-microcapsules than the oil released from microcapsules. The co-microencapsulation can deliver bacterial cells and omega-3 oil to human intestinal system with less impact on functional properties.
Asunto(s)
Ácidos Grasos Omega-3/química , Tracto Gastrointestinal/microbiología , Goma Arábiga/química , Lacticaseibacillus casei/química , Probióticos/análisis , Proteína de Suero de Leche/química , Adhesión Bacteriana , Digestión , Composición de Medicamentos , Sistemas de Liberación de Medicamentos , Ácidos Grasos Omega-3/metabolismo , Tracto Gastrointestinal/metabolismo , Humanos , Lacticaseibacillus casei/crecimiento & desarrollo , Lacticaseibacillus casei/fisiología , Viabilidad Microbiana , Modelos BiológicosRESUMEN
Mine wastes and tailings are considered hazardous to human health because of their potential to generate large quantities of highly toxic emissions of particulate matter (PM). Human exposure to As and other trace metals in PM may occur via inhalation of airborne particulates or through ingestion of contaminated dust. This study describes a laboratory-based method for extracting PM2.5-10 (coarse) and PM2.5 (fine) particles from As-rich mine waste samples collected from an historical gold mining region in regional, Victoria, Australia. We also report on the trace metal and metalloid content of the coarse and fine fraction, with an emphasis on As as an element of potential concern. Laser diffraction analysis showed that the proportions of coarse and fine particles in the bulk samples ranged between 3.4-26.6 and 0.6-7.6 %, respectively. Arsenic concentrations were greater in the fine fraction (1680-26,100 mg kg-1) compared with the coarse fraction (1210-22,000 mg kg-1), and Co, Fe, Mn, Ni, Sb and Zn were found to be present in the fine fraction at levels around twice those occurring in the coarse. These results are of particular concern given that fine particles can accumulate in the human respiratory system. Our study demonstrates that mine wastes may be an important source of metal-enriched PM for mining communities.
Asunto(s)
Arsénico/análisis , Residuos Peligrosos/análisis , Residuos Industriales/análisis , Minería , Material Particulado/química , Oligoelementos/análisis , Contaminantes Atmosféricos , Humanos , Laboratorios , Tamaño de la Partícula , VictoriaRESUMEN
Flaxseed gum (FG) was extracted at four different temperatures (30, 50, 70 and 90°C). Chemical composition and structural features of FG extracted at different temperatures were investigated to determine the effect of temperature. Content of acidic monosaccharides and denatured protein increased with increasing FG extraction temperature. The ratio of neutral to acidic monosaccharides decreased from 6.7 to 5.7 as the extraction temperature was increased from 30 to 90°C. Physiochemical and functional properties, including zeta-potential, surface morphology, emulsifying activity index (EAI) and emulsion stability index (ESI), water absorption capacity (WAC) and fat absorption capacity (FAC) of FG samples, were also investigated as a function of extraction temperature. EAI and WAC of FG samples reduced significantly with rise in extraction temperature. Our study suggests that FG extracted at different temperatures may be specifically targeted for different applications, such as for emulsification or gel formation in food systems.
Asunto(s)
Lino/química , Gomas de Plantas/química , Semillas/química , Temperatura , Fenómenos Químicos , Emulsiones/química , Manipulación de Alimentos/métodos , Microscopía Electrónica de Rastreo , Monosacáridos/análisis , Desnaturalización Proteica , Agua/químicaRESUMEN
Flaxseed protein isolate (FPI) was extracted from flaxseeds, and its amino acid composition and functional properties (solubility, thermal stability, emulsifying properties and electrostatic charge density, water holding and fat absorption capacities) were determined. The highest purity of FPI (90.6%) was achieved by extraction at 60°C. FPI had a low lysine to arginine ratio of 0.25, which is desired in heart-healthy foods and infant formulas. The denaturation temperature of FPI was 105°C. FPI had the highest emulsion activity index (375.51 m(2)/g), highest emulsion stability index (179.5 h) and zeta potential (-67.4 mV) when compared to those of other commonly used proteins, such as sodium caseinate (SC), whey protein isolate (WPI), gelatin (Gel) and soy protein isolate (SPI). The average emulsion droplet size of emulsions stabilized by these proteins was in the order SCAsunto(s)
Aminoácidos/análisis
, Lino/química
, Proteínas de Plantas/aislamiento & purificación
, Semillas/química
, Caseínas/química
, Emulsiones
, Proteínas de Plantas/química
, Estabilidad Proteica
, Solubilidad
, Proteínas de Soja/química
, Electricidad Estática
, Propiedades de Superficie
, Temperatura
, Agua/química
, Proteína de Suero de Leche/química
RESUMEN
Abandoned historical gold mining wastes often exist as geographically extensive, unremediated, and poorly contained deposits that contain elevated levels of As and other potentially toxic elements (PTEs). One of the key variables governing human exposure to PTEs in mine waste is particle size. By applying a size-resolved approach to mine waste characterisation, this study reports on the proportions of mine waste relevant to human exposure and mobility, as well as their corresponding PTE concentrations, in four distinct historical mine wastes from the gold province in Central Victoria, Australia. To the best of our knowledge, such a detailed investigation and comparison of historical mining wastes has not been conducted in this mining-affected region. Mass distribution analysis revealed notable proportions of waste material in the readily ingestible size fraction (≤250 µm; 36.1-75.6 %) and the dust size fraction (≤100 µm; 5.9-45.6 %), suggesting a high potential for human exposure and dust mobilisation. Common to all mine waste types were statistically significant inverse trends between particle size and levels of As and Zn. Enrichment of As in the finest investigated size fraction (≤53 µm) is of particular concern as these particles are highly susceptible to long-distance atmospheric transport. Human populations that reside in the prevailing wind direction from a mine waste deposit may be at risk of As exposure via inhalation and/or ingestion pathways. Enrichment of PTEs in the finer size fractions indicates that human health risk assessments based on bulk contaminant concentrations may underestimate potential exposure intensities.
Asunto(s)
Arsénico/análisis , Contaminantes Ambientales/análisis , Tamaño de la Partícula , Monitoreo del Ambiente/métodos , Contaminantes Ambientales/química , Oro , Humanos , Residuos Industriales/análisis , Minería , Medición de Riesgo , Victoria , Zinc/análisis , Zinc/químicaRESUMEN
Tuna oil rich in omega-3 fatty acids was microencapsulated in whey protein isolate (WPI)-gum arabic (GA) complex coacervates, and subsequently dried using spray and freeze drying to produce solid microcapsules. The oxidative stability, oil microencapsulation efficiency, surface oil and morphology of these solid microcapsules were determined. The complex coacervation process between WPI and GA was optimised in terms of pH, and WPI-to-GA ratio, using zeta potential, turbidity, and morphology of the microcapsules. The optimum pH and WPI-to-GA ratio for complex coacervation was found to be 3.75 and 3 : 1, respectively. The spray dried solid microcapsules had better stability against oxidation, higher oil microencapsulation efficiency and lower surface oil content compared to the freeze dried microcapsules. The surface of the spray dried microcapsules did not show microscopic pores while the surface of the freeze dried microcapsules was more porous. This study suggests that solid microcapsules of omega-3 rich oils can be produced using WPI-GA complex coacervates followed by spray drying and these microcapsules can be quite stable against oxidation. These microcapsules can have many potential applications in the functional food and nutraceuticals industry.
Asunto(s)
Composición de Medicamentos/métodos , Ácidos Grasos Omega-3/química , Aceites de Pescado/química , Goma Arábiga/química , Proteínas de la Leche/química , Animales , Cápsulas/química , Fenómenos Químicos , Concentración de Iones de Hidrógeno , Microscopía Confocal , Atún , Proteína de Suero de LecheRESUMEN
Soil and mine waste around historical gold mining sites may have elevated arsenic concentrations. Recent evidence suggests some systemic arsenic absorption by residents in the goldfields region of Victoria, Australia. Victorian Cancer Registry and geochemical data were accessed for an ecological geographical correlation study, 1984-2003. Spatial empirical Bayes smoothing was applied when estimating standardised incidence ratios (SIRs) for cancers in 61 statistical local areas. The derived soil arsenic exposure metric ranged from 1.4 to 1857 mg/kg. Spatial autoregressive modelling detected increases in smoothed SIRs for all cancers of 0.05 (95% confidence interval (CI), 0.02-0.08) and 0.04 (0.01-0.07) per 2.7-fold increase in the natural log-transformed exposure metric for males and females, respectively, in more socioeconomically disadvantaged areas; for melanoma in males (0.05 (0.01-0.08) adjusted for disadvantage) and females (0.05 (0.02-0.09) in disadvantaged areas). Excess risks were estimated for all cancers (relative risk 1.21 (95% CI, 1.15-1.27) and 1.08 (1.03-1.14)), and melanoma (1.52 (1.25-1.85) and 1.29 (1.08-1.55)), for males and females, respectively, in disadvantaged areas in the highest quintile of the exposure metric relative to the lowest. Our findings suggest small but significant increases in past cancer risk associated with increasing soil arsenic in socioeconomically disadvantaged areas and demonstrate the robustness of this geospatial approach.
Asunto(s)
Arsénico/toxicidad , Exposición a Riesgos Ambientales , Oro , Minería , Neoplasias/epidemiología , Femenino , Humanos , Incidencia , Masculino , Neoplasias/inducido químicamente , Victoria/epidemiologíaRESUMEN
Arsenic is naturally associated with gold mineralisation and elevated in some soils and mine waste around historical gold mining activity in Victoria, Australia. To explore uptake, arsenic concentrations in children's toenail clippings and household soils were measured, and the microdistribution and speciation of arsenic in situ in toenail clipping thin sections investigated using synchrotron-based X-ray microprobe techniques. The ability to differentiate exogenous arsenic was explored by investigating surface contamination on cleaned clippings using depth profiling, and direct diffusion of arsenic into incubated clippings. Total arsenic concentrations ranged from 0.15 to 2.1 microg/g (n=29) in clipping samples and from 3.3 to 130 microg/g (n=22) in household soils, with significant correlation between transformed arsenic concentrations (Pearson's r=0.42, P=0.023) when household soil was treated as independent. In clipping thin sections (n=2), X-ray fluorescence (XRF) mapping showed discrete layering of arsenic consistent with nail structure, and irregular arsenic incorporation along the nail growth axis. Arsenic concentrations were heterogeneous at 10x10 microm microprobe spot locations investigated (<0.1 to 13.3 microg/g). X-ray absorption near-edge structure (XANES) spectra suggested the presence of two distinct arsenic species: a lower oxidation state species, possibly with mixed sulphur and methyl coordination (denoted As(approximately III)(-S, -CH3)); and a higher oxidation state species (denoted As(approximately V)(-O)). Depth profiling suggested that surface contamination was unlikely (n=4), and XRF and XANES analyses of thin sections of clippings incubated in dry or wet mine waste, or untreated, suggested direct diffusion of arsenic occurred under moist conditions. These findings suggest that arsenic in soil contributes to some systemic absorption associated with periodic exposures among children resident in areas of historic gold mining activity in Victoria, Australia. Future studies are required to ascertain if adverse health effects are associated with current levels of arsenic uptake.
Asunto(s)
Arsénico/metabolismo , Exposición a Riesgos Ambientales/análisis , Minería , Uñas/metabolismo , Contaminantes del Suelo/metabolismo , Dedos del Pie , Adolescente , Arsénico/análisis , Arsénico/química , Niño , Preescolar , Monitoreo del Ambiente , Femenino , Oro , Humanos , Masculino , Suelo/análisis , Contaminantes del Suelo/análisis , Contaminantes del Suelo/químicaRESUMEN
This paper reports on the major cations (Ca, Mg, Na and K) and arsenic (As) compositions of surface waters collected from major creeks, rivers and lakes in Central Victoria (Australia). The surface waters were found to be neutral to alkaline (pH 6.7-9.4), oxidised (average redox potential (Eh) about 130 mV) and showed variable concentrations of dissolved ions (EC, about 51-4386 microS/cm). The concentrations of dissolved major cations in surface waters were found to be in the order of Na>>Mg>Ca>K and in soils the contents of metals followed an order of abundance as: Ca>Mg>>K>Na. While Na was the least abundant in soils, it registered the highest dissolved cation in surface waters. Of the four major cations, the average concentration of Na (98.7 mg/L) was attributed to the weathering of feldspars and atmospheric input. Relatively highly dissolved concentrations of Na and Mg compared with the world average values of rivers reflected the weathering of rock and soil minerals within the catchments. The As soil level is naturally high (linked to lithology) as reflected by high background soil values and mining operations are also considered to be a contributory factor. Under relatively alkaline-oxidative conditions low mobility of dissolved As (average about 7.9 microg/L) was observed in most of the surface waters with a few higher values (> 15 microg/L) around a sewage disposal site and mine tailings. Arsenic in soils is slowly released into water under alkaline and/or lower Eh conditions. The efficient sink of Fe, Al and Mn oxides acts as a barrier against the As release under near neutral-oxidising conditions. High As content (average about 28.3 mg/kg) in soils was found to be associated with Fe-hydroxides as revealed by XRD and SEM analysis. The dissolved As concentration was found to be below the recommended maximum levels for recreational water in all surface waters (lakes and rivers) in the study area. Catchment lithology exerted the fundamental control on surface water chemistry. Sites impacted by mining waste dumps showed a decline in water quality.