Menopause in Latin America: Symptoms, attitudes, treatments and future directions in Costa Rica.

Similar to their US counterparts, Costa Rican women enter menopause at ∼50 years of age, have similar symptoms, including hot flashes and night sweats, as well as an overall negative attitude toward the menopausal transition. One study of rural women in Monteverde reported that women knew little about the menopausal transition, as the subject was not discussed. Similar to other Latin American women, the use of hormone therapy by Costa Rican women is low and instead they use alternative therapies, including massage, dietary changes and herbal medicines. A wide variety of herbal therapies are used, and some of these herbs have estrogenic activities in vitro. However, clinical data on the safety and efficacy of any of these treatments is lacking. Recently, a disturbing increase in the incidence of human papilloma virus infections in menopausal women has been reported, due in part to more sexual freedom after menopause. Fortunately, the strain of HPV infecting these women is not associated with cervical cancer. Overall, there is a significant lack of scientific and medical research on menopausal women in Costa Rica. Considering the aging population, the high use of herbal medicines by menopausal women and the lack of clinical studies on these treatments, future research should focus on gaining a better understanding of menopause in this population. Furthermore, new educational programs for these women and the health professionals who serve them are necessary, as well as investigations of the safety and efficacy of the herbal supplements women use to manage their menopausal symptoms.

On the potential of hydrated storage for naturally derived ECMs and associated effects on mechanical and cellular performance.

Tissue engineered acellular vascular grafts are an emerging concept in the development of vascular prostheses for the minimally invasive treatment of cardiovascular diseases. Extracellular matrix (ECM) scaffolds, such as small intestinal submucosa (SIS) and urinary bladder matrix (UBM), offer many advantages over currently available synthetic devices. However, storage of such biomaterials can unduly influence the scaffold properties. This study evaluated the effects of up to 16 weeks hydrated storage on the mechanical and cellular performance of stented and unstented tubular scaffolds. This study aimed to demonstrate the viability, mechanical integrity, and bioactive potential of xenogeneic ECMs as potential off-the-shelf vascular prosthetic devices. Rehydrated ECM samples versus the lyophilized controls showed an increase in UTS and stiffness. The mechanical strength of all samples evaluated was above the average reported aortic tissue failure strength and more compliant than current synthetic materials employed. Post-storage cellular bioactivity investigations indicated that both ECM scaffolds tested were unaffected by increased hydrated storage duration when compared with the controls. Overall, the results indicate that the biomechanical and biologic properties of ECMs are not negatively affected by long-term hydrated storage. Therefore, with further investigations, naturally derived ECM materials may offer potential as an off-the-shelf therapeutic treatment of cardiovascular diseases.

Engineering silicone rubbers for in vitro studies: creating AAA models and ILT analogues with physiological properties.

In vitro studies of abdominal aortic aneurysm (AAA) have been widely reported. Frequently mock artery models with intraluminal thrombus (ILT) analogs are used to mimic the in vivo AAA. While the models used may be physiological, their properties are frequently either not reported or investigated. This study is concerned with the testing and characterization of previously used vessel analog materials and the development of new materials for the manufacture of AAA models. These materials were used in conjunction with a previously validated injection molding technique to manufacture AAA models of ideal geometry. To determine the model properties (stiffness (beta) and compliance), the diameter change of each AAA model was investigated under incrementally increasing internal pressures and compared with published in vivo studies to determine if the models behaved physiologically. A FEA study was implemented to determine if the pressure-diameter change behavior of the models could be predicted numerically. ILT analogs were also manufactured and characterized. Ideal models were manufactured with ILT analog internal to the aneurysm region, and the effect of the ILT analog on the model compliance and stiffness was investigated. The wall materials had similar properties (E(init) 2.22 MPa and 1.57 MPa) to aortic tissue at physiological pressures (1.8 MPa (from literature)). ILT analogs had a similar Young's modulus (0.24 MPa and 0.33 MPa) to the medial layer of ILT (0.28 MPa (from literature)). All models had aneurysm sac compliance (2.62-8.01 x 10(-4)/mm Hg) in the physiological range (1.8-9.4 x 10(-4)/mm Hg (from literature)). The necks of the AAA models had similar stiffness (20.44-29.83) to healthy aortas (17.5+/-5.5 (from literature)). Good agreement was seen between the diameter changes due to pressurization in the experimental and FEA wall models with a maximum difference of 7.3% at 120 mm Hg. It was also determined that the inclusion of ILT analog in the sac of the models could have an effect on the compliance of the model neck. Ideal AAA models with physiological properties were manufactured. The behavior of these models due to pressurization was predicted using finite element analysis, validating this technique for the future design of realistic physiological AAA models. Addition of ILT analogs in the aneurysm sac was shown to affect neck behavior. This could have implications for endovascular AAA repair due to the importance of the neck for stent-graft fixation.

Improved assessment and treatment of abdominal aortic aneurysms: the use of 3D reconstructions as a surgical guidance tool in endovascular repair.

BACKGROUND: Endovascular repair is fast becoming the treatment of choice for abdominal aortic aneurysms in anatomically suitable patients. 3D reconstructions not only aid conventional 2D measurements but also allow further analyses of the vessel anatomy. METHODS: Computed tomography scan data for four male patients awaiting endovascular repair were obtained. 3D reconstructions were performed to determine measurements. Wall stress was determined on one particular case using finite element analysis. RESULTS: 3D reconstruction allows measurements to be obtained that can be difficult to determine using 2D images. This method complements traditional 2D approaches. Reconstructions also provided imaging of potential anatomical problems. Wall stress results showed key regions that may be possible rupture sites. CONCLUSION: 3D reconstructions greatly aid surgical planning. As stent-graft devices evolve, anatomical difficulties previously considered contraindications to endovascular repair can now be overcome with careful planning. 3D reconstruction is a useful adjunct to assessment and planning of endovascular repair.

3D reconstruction and manufacture of real abdominal aortic aneurysms: from CT scan to silicone model.

Abdominal aortic aneurysm (AAA) can be defined as a permanent and irreversible dilation of the infrarenal aorta. AAAs are often considered to be an aorta with a diameter 1.5 times the normal infrarenal aorta diameter. This paper describes a technique to manufacture realistic silicone AAA models for use with experimental studies. This paper is concerned with the reconstruction and manufacturing process of patient-specific AAAs. 3D reconstruction from computed tomography scan data allows the AAA to be created. Mould sets are then designed for these AAA models utilizing computer aided designcomputer aided manufacture techniques and combined with the injection-moulding method. Silicone rubber forms the basis of the resulting AAA model. Assessment of wall thickness and overall percentage difference from the final silicone model to that of the computer-generated model was performed. In these realistic AAA models, wall thickness was found to vary by an average of 9.21%. The percentage difference in wall thickness recorded can be attributed to the contraction of the casting wax and the expansion of the silicone during model manufacture. This method may be used in conjunction with wall stress studies using the photoelastic method or in fluid dynamic studies using a laser-Doppler anemometry. In conclusion, these patient-specific rubber AAA models can be used in experimental investigations, but should be assessed for wall thickness variability once manufactured.

Physician conduct and other factors that affect consumer satisfaction with medical care.

Major dimensions of consumer perceptions regarding physicians and medical care services were identified using factor analysis of survey data, as follows: accessibility, availability of family doctors, availability of hospitals/specialists, completeness of facilities, continuity of care, and physician conduct (art and technical aspects of quality). Scores for these dimensions and multivariate statistical methods were used to predict general satisfaction ratings for a cross section of adults and for groups differing in age, education, health status, and sex. Physician conduct was clearly the most important factor in relation to general satisfaction with care for the total sample and for all groups studied. Other factors also were important, suggesting that more than one interpretation of general satisfaction scores should be considered when consumer satisfaction surveys are used to support the planning of educational programs in medicine and the delivery of services.