RESUMEN
Aluminum (Al) toxicity and low pH are major factors limiting plant growth in acidic soils. Sensitive to Proton Rhizotoxicity 1 (STOP1) transcription factors respond to these stresses by regulating the expression of multiple Al- or low pH-responsive genes. ZmSTOP1-A, a STOP1-like protein from maize (Zea mays), was localized to the nucleus and showed transactivation activity. ZmSTOP1-A was expressed moderately in both roots and shoots of maize seedlings, but was not induced by Al stress or low pH. Overexpression of ZmSTOP1-A in Arabidopsis Atstop1 mutant partially restored Al tolerance and improved low pH tolerance with respect to root growth. Regarding Al tolerance, ZmSTOP1-A/Atstop1 plants showed clear upregulation of organic acid transporter genes, leading to increased organic acid secretion and reduced Al accumulation in roots. In addition, the antioxidant enzyme activity in roots and shoots of ZmSTOP1-A/Atstop1 plants was significantly enhanced, ultimately alleviating Al toxicity via scavenging reactive oxygen species. Similarly, ZmSTOP1-A could directly activate ZmMATE1 expression in maize, positively correlated with the number of Al-responsive GGNVS cis-elements in the ZmMATE1 promoter. Our results reveal that ZmSTOP1-A is an important transcription factor conferring Al tolerance by enhancing organic acid secretion and reactive oxygen species scavenging in Arabidopsis.
Asunto(s)
Proteínas de Arabidopsis , Arabidopsis , Arabidopsis/metabolismo , Proteínas de Arabidopsis/genética , Proteínas de Arabidopsis/metabolismo , Especies Reactivas de Oxígeno/metabolismo , Aluminio/toxicidad , Aluminio/metabolismo , Raíces de Plantas/genética , Raíces de Plantas/metabolismo , Factores de Transcripción/genética , Factores de Transcripción/metabolismo , Regulación de la Expresión Génica de las PlantasRESUMEN
Na3 V2 (PO4 )2 O2 F (NVPOF) is widely accepted as advanced cathode material for sodium-ion batteries with high application prospects ascribing to its considerable specific capacity and high working voltage. However, challenges in the full realization of its theoretical potential lie in the novel structural design to accelerate its Na+ diffusivity. Herein, considering the important role of polyanion groups in constituting Na+ diffusion tunnels, boron (B) is doped at the P-site to obtain Na3 V2 (P2- x Bx O8 )O2 F (NVP2- x Bx OF). As evidenced by density functional theory modeling, B-doping induces a dramatic decrease in the bandgap. Delocalization of electrons on the O anions in BO4 tetrahedra is observed in NVP2- x Bx OF, which dramatically lowers the electrostatic resistance experienced by Na+ . As a result, the Na+ diffusivity in the NVP2- x Bx OF cathode has accelerated up to 11 times higher, which secures a high rate property (67.2 mAh g-1 at 60 C) and long cycle stability (95.9% capacity retention at 108.6 mAh g-1 at 10 C after 1000 cycles). The assembled NVP1.90 B0.10 OF//Se-C full cell demonstrates exceptional power/energy density (213.3 W kg-1 @ 426.4 Wh kg-1 and 17970 W kg-1 @ 119.8 Wh kg-1 ) and outstanding capability to withstand long cycles (90.1% capacity retention after 1000 cycles at 105.3 mAh g-1 at 10 C).
RESUMEN
In this work, Ti3 Al1-x Six C2 (x=0, 0.2, 0.4, and 0.6) with Al/Si solid solution structure are synthesized, and the effects of Si on their oxidation behaviors at 1000 °C are evaluated. The addition of Si not only contributes to the formation of Ti5 Si3 impurity but also affects the composition of the oxide scale. Particularly, the incorporation of Si in the TiO2 lattice is demonstrated, which alters the formation energy of the (110) plane in TiO2 , thus leading to the preferential growth of Si-doped TiO2 to dendritic congeries. Moreover, the Si addition is believed to affect mass transportation during the oxidation process, which accelerates the formation of a continuous Al2 O3 layer in the oxide scale. With an optimized Si content, the oxidation of Ti3 Al1-x Six C2 is restrained. However, with excess Si content, the continuity of the resulting Al2 O3 layer is destroyed, thus the oxidation rate rises again.
RESUMEN
Stabilizing Na+ accessibility at high voltage and accelerating Na+ diffusivity are pressing issues to further enhance the energy density of the Na3V2(PO4)3 (NVP) cathode for sodium-ion batteries (SIBs). Herein, by taking a V/Cr solid-solution MXene as a precursor, a facile in-situ reactive transformation strategy to embed Cr-substituted NVP (NVCP) nanocrystals in a dual-carbon network is proposed. Particularly, the substituted Cr atom triggers the accessibility of additional Na+ in NVCP, which is demonstrated by an additional reversible redox plateau at 4.0 V even under extreme conditions. More importantly, the Cr atom alters the Na+ ordering at the Na2 sites with an additional intermediate phase formation during charging/discharging, thus reducing the energy barriers for Na+ migration. As a result, Na+ diffusivity in NVCP accelerates to 2-3 orders of magnitude higher than that of NVP. Eventually, the NVCP cathode exhibits extraordinarily high-rate capability (78 mA g-1 at 200 C and 68975 W kg-1), outstanding cycle stability (over 1500 cycles at 10 C), excellent low-temperature property, and full cell performance.
RESUMEN
Aluminum (Al) toxicity causes severe reduction in crop yields in acidic soil. The natural resistance-associated macrophage proteins (NRAMPs) play an important role in the transport of mineral elements in plants. Recently, OsNrat1 and SbNrat1 were reported specifically to transport trivalent Al ions. In this study, we functionally characterized ZmNRAMP4, a gene previously identified from RNA-Seq data from Al-treated maize roots, in response to Al exposure in maize. ZmNRAMP4 was predominantly expressed in root tips and was specifically induced by Al stress. Yeast cells expressing ZmNRAMP4 were hypersensitive to Al, which was associated with Al accumulation in yeast. Furthermore, overexpression of ZmNRAMP4 in Arabidopsis conferred transgenic plants with a significant increase in Al tolerance. However, expression of ZmNRAMP4, either in yeast or in Arabidopsis, had no effect on the response to cadmium stress. Taken together, these results underlined an internal tolerance mechanism involving ZmNRAMP4 to enhance Al tolerance via cytoplasmic sequestration of Al in maize.
Asunto(s)
Arabidopsis , Aluminio/metabolismo , Arabidopsis/genética , Arabidopsis/metabolismo , Regulación de la Expresión Génica de las Plantas , Proteínas de Plantas/metabolismo , Raíces de Plantas/metabolismo , Plantas Modificadas Genéticamente/genética , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/metabolismo , Zea mays/genética , Zea mays/metabolismoRESUMEN
Hydrogels are investigated broadly in flexible sensors which have been applied into wearable electronics. However, further application of hydrogels is restricted by the ambiguity of the sensing mechanisms, and the multi-functionalization of flexible sensing systems based on hydrogels in terms of cost, difficulty in integration, and device fabrication remains a challenge, obstructing the specific application scenarios. Herein, cost-effective, structure-specialized and scenario-applicable 3D printing of direct ink writing (DIW) technology fabricated two-dimensional (2D) transition metal carbides (MXenes) bonded hydrogel sensor with excellent strain and temperature sensing performance is developed. Gauge factor (GF) of 5.7 (0 - 191% strain) and high temperature sensitivity (-5.27% °C-1) within wide working range (0 - 80 °C) can be achieved. In particular, the corresponding mechanisms are clarified based on finite element analysis and the first use of in situ temperature-dependent Raman technology for hydrogels, and the printed sensor can realize precise temperature indication of shape memory solar array hinge.
RESUMEN
Manganese dioxide (MnO2 ) has been widely used in the field of energy storage due to its high specific capacitance, low cost, natural abundance, and being environmentally friendly. However, suffering from poor electrical conductivity and high dissolvability, the performance of MnO2 can no longer meet the needs of rapidly growing technological development, especially for the application as electrode material in metal-ion batteries and supercapacitors. In this review, recent studies on the development of binary or multiple MnO2 -based composites with conductive components for energy storage are summarized. Firstly, general preparing methods for MnO2 -based composites are introduced. Subsequently, the binary and multiple MnO2 -based composites with carbon, conducting polymer, and other conductive materials are discussed respectively. The improvement in their performance is summarized as well. Finally, perspectives on the practical applications of MnO2 -based composites are presented.
RESUMEN
Ni-rich layered cathodes with high energy densities reveal an enormous potential for lithium-ion batteries (LIBs), however, their poor stability and reliability have inhibited their application. To ensure their stability over extensive cycles at high voltage, surface/interface modifications are necessary to minimize the adverse reactions at the cathode-electrolyte interface (CEI), which is a critical factor impeding electrode performance. Therefore, this review provides a comprehensive discussion on the surface engineering of Ni-rich cathode materials for enhancing their lithium storage property. Based on the structural characteristics of the Ni-rich cathode, the major failure mechanisms of these structures during synthesis and operation are summarized. Then the existing surface modification techniques are discussed and compared. Recent breakthroughs in various surface coatings and modification strategies are categorized and their unique functionalities in structural protection and performance-enhancing are elaborated. Finally, the challenges and outlook on the Ni-rich cathode materials are also proposed.
RESUMEN
The development of efficient and low-cost catalysts is of great significance for the future application of the electrocatalytic hydrogen evolution reaction (HER). Herein, a series of Ni,N co-doped Mo2C nanostructures (Nix-Mo2C/N) with different Ni content levels are fabricated. The phase-directing effect of Ni on Mo2C/N is observed, which is in charge of the phase transformation of Mo2C/N from an α- to a ß-phase. At the optimized Ni-doping level, biphase Ni15-Mo2C/N exhibits outstanding HER activity under both acidic and alkaline conditions. In particular, under alkaline conditions, Ni15-Mo2C/N delivers an overpotential of only 105.0 mV, accompanied by a low Tafel slope of 44.96 mV dec-1. The performance is comparable to commercial 20% Pt/C and higher than most state-of-the-art Mo2C-based catalysts as well.
RESUMEN
Mo-Ni alloy-based electrocatalysts are regarded as promising candidates for the hydrogen evolution reaction (HER), despite their vulnerable stability in alkaline solution that hampers further application. Herein, Mo2 TiC2 Tx MXene, is employed as a support for MoNi4 alloy nanocrystals (NCs) to fabricate a unique nanoflower-like MoNi4 -MXn electrocatalyst. A remarkably strong built-in electric field is established at the interface of two components, which facilitates the electron transfer from Mo2 TiC2 Tx to MoNi4 . Due to the accumulation of electrons at the MoNi4 sites, the adsorption of the catalytic intermediates and ionic species on MoNi4 is affected consequently. As a result, the MoNi4 -MX10 nanohybrid exhibits the lowest overpotential, even lower than 10% Pt/C catalyst at the current density of 10 mA cm-2 in 1 m KOH solution (122.19 vs 129.07 mV, respectively). Furthermore, a lower Tafel slope of 55.88 mV dec-1 is reported as compared to that of the 10% Pt/C (65.64 mV dec-1 ). Additionally, the MoNi4 -MX10 catalyst also displays extraordinary chemical stability in alkaline solution, with an activity loss of only 0.15% per hour over 300 h of operation. This reflects the great potential of using MXene-based interfacial engineering for the synthesis of a highly efficient and stable electrocatalyst.
RESUMEN
Aluminum (Al) toxicity is the main factor limiting plant growth and the yield of cereal crops in acidic soils. Al-induced oxidative stress could lead to the excessive accumulation of reactive oxygen species (ROS) and aldehydes in plants. Aldehyde dehydrogenase (ALDH) genes, which play an important role in detoxification of aldehydes when exposed to abiotic stress, have been identified in most species. However, little is known about the function of this gene family in the response to Al stress. Here, we identified an ALDH gene in maize, ZmALDH, involved in protection against Al-induced oxidative stress. Al stress up-regulated ZmALDH expression in both the roots and leaves. The expression of ZmALDH only responded to Al toxicity but not to other stresses including low pH and other metals. The heterologous overexpression of ZmALDH in Arabidopsis increased Al tolerance by promoting the ascorbate-glutathione cycle, increasing the transcript levels of antioxidant enzyme genes as well as the activities of their products, reducing MDA, and increasing free proline synthesis. The overexpression of ZmALDH also reduced Al accumulation in roots. Taken together, these findings suggest that ZmALDH participates in Al-induced oxidative stress and Al accumulation in roots, conferring Al tolerance in transgenic Arabidopsis.
Asunto(s)
Adaptación Fisiológica/genética , Aldehído Deshidrogenasa/genética , Aluminio/toxicidad , Arabidopsis/genética , Arabidopsis/fisiología , Genes de Plantas , Zea mays/genética , Adaptación Fisiológica/efectos de los fármacos , Aldehído Deshidrogenasa/química , Aldehído Deshidrogenasa/metabolismo , Secuencia de Aminoácidos , Antioxidantes/metabolismo , Arabidopsis/efectos de los fármacos , Ascorbato Peroxidasas/metabolismo , Ácido Ascórbico/metabolismo , Clonación Molecular , Regulación de la Expresión Génica de las Plantas/efectos de los fármacos , Glutatión/metabolismo , Glutatión Reductasa/metabolismo , Peróxido de Hidrógeno/metabolismo , Peroxidación de Lípido/efectos de los fármacos , Estrés Oxidativo/efectos de los fármacos , Filogenia , Hojas de la Planta/efectos de los fármacos , Hojas de la Planta/metabolismo , Raíces de Plantas/efectos de los fármacos , Raíces de Plantas/metabolismo , Plantas Modificadas Genéticamente , Prolina/metabolismo , ARN Mensajero/genética , ARN Mensajero/metabolismo , Fracciones Subcelulares/metabolismo , Superóxidos/metabolismo , Nicotiana/metabolismoRESUMEN
Lithium-sulfur (Li-S) batteries have hitherto attracted dramatic research interests as an optional high-energy output candidate to replace the traditional lithium-ion batteries on account of its high energy density and low cost. Nonetheless, their kinetics arrearage and detrimental "shuttling effect" caused by the migration of soluble lithium polysulfide (LiPS) intermediates severely limit its practical application. Here, by a nonthermal route sulfur is in-situ imprisoned into Co/N-codoped hollow carbon sphere (NC-Co) to construct an integrated S/C-Co-N hollow cathode (S@NC-Co) and directly applied in Li-S batteries, which effectively avoids complex template removal and sulfur infiltration process. The hollow NC-Co sphere not only restricts polysulfides migration via physical confinement but also enhances polysulfides conversion through redox-active electro-catalysis. Moreover, the hollow structure has large cavity offering sufficient space to accommodate volume expansion and excellent conductivity promising efficient electron/charge transfer. As a result, the batteries assembled by the S@NC-Co cathode achieve low polarization and high-rate capability (551 mAh g-1 at 4C). Remarkably, the batteries also present an outstanding long-term durability over 800 cycles at 1C, in which the capacity attenuation is merely 0.06 % per cycle. This work demonstrates a novel strategy in designing hierarchical structures or nanoreactors for electrochemical reactions and energy storage systems.
RESUMEN
Given the critical demands on energy conversion, storage, and transportation, tremendous interest has been devoted to the field of material development related to energy harvesting, recently. As the only route towards energy utilization, the carriers with the characteristics of low carbon are regarded as the future choice, e.g., hydrogen and ammonia. To this end, electrocatalysis provides a green way to access these substances. However, the unfulfilled conversion efficiency is the bottleneck for practical application. In this review, the promising characteristics of amorphous materials and the amorphous-induced electrocatalytic enhancement (AIEE) were emphasized. In the beginning, the characteristics of amorphous materials are briefly summarized. The basic mechanism of heterogeneous electrocatalytic reactions is illustrated, including the hydrogen/oxygen evolution and oxygen/nitrogen reduction. In the third part, the electrocatalytic performance of amorphous materials is discussed in detail, and the mechanism of AIEE is highlighted. In the last section of this review, the challenges and outlook for the development of amorphous enhanced electrocatalysis are presented.
RESUMEN
In this article, a new zinc-containing ionic liquid (IL) [HMMIm]2[ZnCl4] (HMMIm = 1-hexyl-2,3-dimethyl-imidazolium) is designed, which acts as a multifunctional source for the interfacial engineering of ZnS nanodots (NDs). Given the electrostatic interaction driven by the imidazolium cation, the steric effect of the alkyl chain, and the in situ released Zn ion from the IL, [HMMIm]2[ZnCl4] shows great advantages in controlling the formation of ZnS NDs. Based on this strategy, a nanocomposite consisting of homodispersed ZnS NDs anchored on sulfur/nitrogen dual-doped reduced graphene oxide (ZnS-NDs@SNG) is prepared. When evaluated as an anode material for lithium-ion batteries (LIBs), the nanocomposite delivers high reversible specific capacity, excellent high-rate performance, and superior cycling life. In particular, a discharge capacity of 648.1 mA h g-1 can be achieved at a high current density (10.0 A g-1) over 5000 cycles. Benefitting from the multifunctional IL and the simple synthesis protocol, the IL-assisted interfacial engineering strategy will enable a new avenue for the controllable synthesis of metal-sulfide-based anode materials.
RESUMEN
With increasing research interest in the field of flexible electronics and wearable devices, intensive efforts have been paid to the development of novel inorganic-organic hybrid materials. As a newly developed two-dimensional (2D) material family, MXenes present many advantages compared with other 2D analogs, especially the variable surface terminal groups, thus the infinite possibility for the regulation of surface physicochemical properties. However, there is still less attention paid to the interfacial compatibility of the MXene-organic hybrids. To this end, this review will briefly summarize the recent progress on MXene-organic hybrids, offers a deeper understanding of the interaction and collaborative mechanism between the MXenes and organic component. After the discussion of the structure and surface characters of MXenes, strategies towards MXene-organic hybrids are introduced based on the interfacial interactions. Based on different application scenarios, the advantages of MXene-organic hybrids in constructing flexible devices are then discussed. The challenges and outlook on MXene-organic hybrids are also presented.
RESUMEN
Owing to the large surface area and adjustable surface properties, the two-dimensional (2D) MXenes have revealed the great potential in constructing hybrid materials and for Na-ion storage (SIS). In particular, the facilitated Na-ion adsorption, intercalation, and migration on MXenes can be achieved by surface modification. Herein, a new surface modification strategy on MXenes, namely, the reactive surface modification (RSM), is focused and illustrated, while the recent advances in the research of SIS performance based on MXenes and their derivatives obtained from the RSM process are briefly summarized as well. In the second section, the intrinsic surface chemistries of MXenes and their surface-related physicochemical properties are first summarized. Meanwhile, the close relationship between the surface characters and the Na-ion adsorption, intercalation, and migration on MXenes is emphasized. Following the SIS properties of MXenes, the surface-induced SIS property variations, and the SIS performance of RSM MXene-based hybrids are discussed progressively. Finally, the existing challenges and prospects on the RSM MXene-based hybrids for SIS are proposed.
RESUMEN
An electrochemical nitrogen oxidation approach has been realized experimentally by a Pd-decorated MXene (Ti3C2Tx, T = F and O) electrocatalyst under ambient conditions. The Pd-MXene catalyst can achieve a desirable nitrate yield rate of 2.80 µg h-1 mgcat-1 (equivalent to 45.16 µmol h-1 gcat-1 HNO3) as well as a high nitrate faradaic efficiency of 11.34% in a favorable neutral pH environment.
RESUMEN
Electrocatalysts are one of the most important parts for oxygen evolution reaction (OER) to overcome the sluggish kinetics. Herein, amorphous Fe-Ni-P-B-O (FNPBO) nanocages as efficient OER catalysts are synthesized by a simple low-cost and scalable method at room temperature. The samples are chemically stable, in clear contrast to reported unstable or even pyrophoric boride samples. The Fe/Ni ratio of the FNPBO nanocages can be continuously adjusted to optimize the OER catalytic performance. The FNPBO nanocages composed of multicomponent elements can weaken the metal-metal bonds, thus rearranging the electron density around the catalytic metal atom centers and reducing the energy barrier for intermediate formation. Hence the optimized FNPBO (Fe6.4Ni16.1P12.9B4.3O60.2) catalyst shows superior intrinsic electrocatalytic activity for OER. The low overpotential to afford the current density of 10 mA cm-2 (236 mV), the small Tafel slope (39 mV dec-1), and the high specific current density (26.44 mA cm-2) at a given overpotential of 300 mV make a sharp contrast to state-of-the-art RuO2 (327 mV, 136 mV dec-1, and 0.028 mA cm-2, respectively).
RESUMEN
Heterostructures with abundant phase boundaries are compelling for surface-mediated electrochemical applications. However, rational design of such bifunctional electrocatalysts for efficient hydrogen and oxygen evolution reactions (HER and OER) is still challenging. Here, due to the well-matched lattice parameters, we easily achieved the epitaxy of two-dimensional ternary nickel thiophosphate (NiPS3) nanosheets with in-grown dinickel phosphide (Ni2P) through an in situ growth strategy. Density functional theory calculations reveal that the NiPS3/Ni2P heterojunction significantly decreases the kinetic barrier for hydrogen adsorption and accelerates electron transfer due to the built-in electric field at the epitaxial interfaces. The significantly improved electrocatalytic performance is shown to be closely related to the epitaxial interfacial area rather than the amount of secondary phase. Notably, the resultant NiPS3/Ni2P heterostructures enable an overall water splitting electrolyzer to achieve 50 mA cm-2 at a lower bias of 1.65 V compared to that for the pristine NiPS3 alone (2.02 V) and even the benchmark Pt/C//IrO2 electrocatalysts (1.69 V).
RESUMEN
Presented are the theoretical calculation and experimental studies of a Ti3C2T x MXene-based nanohybrid with simultaneous Nb doping and surface transition metal alloy modification. Guided by the density functional theory calculation, the Nb doping can move up the Fermi energy level to the conduction band, thus enhancing the electronic conductivity. Meanwhile, the surface modification by Ni/Co alloy can moderate the surface M-H affinity, which will further enhance the hydrogen evolution reaction (HER) activity. A series of Ni/Co alloy attached on Nb-doped Ti3C2T x MXene nanohybrids (denoted as NiCo@NTM) are successfully prepared. As expected, the Ni0.9Co0.1@âNTM nanohybrids present an extraordinary HER activity in alkaline solution, which only needs an overpotential (η) of 43.4 mV to reach the current density of 10 mA cm-2 in 1 m KOH solution and shows good stability. The performance of the Ni0.9Co0.1@âNTM nanohybrids is comparable to the commercial 10% Pt/C electrode (34.4 mV@10 mA cm-2) and is better than most state-of-the-art Pt-free HER catalysts. Inspired by the facile synthesis process and chemical versatility of both MXene and transition metal alloys, the nanohybrids reported here are promising non-noble metal electrocatalysts for water-alkali electrolysis.