RESUMEN
PURPOSE: Tibia plafond or pilon fractures present a high level of complexity, making their surgical management challenging. Three-Dimensional Virtual Planning (3DVP) can assist in preoperative planning to achieve optimal fracture reduction. This study aimed to assess the symmetry of the left and right tibial plafond and whether left-right mirroring can reliably be used. METHODS: Bilateral CT scans of the lower limbs of 75 patients without ankle problems or prior fractures of the lower limb were included. The CT images were segmented to create 3D surface models of the tibia. Subsequently, the left tibial models were mirrored and superimposed onto the right tibia models using a Coherent Point Drift surface matching algorithm. The tibias were then cut to create bone models of the distal tibia with a height of 30 mm, and correspondence points were established. The Euclidean distance was calculated between correspondence points and visualized in a boxplot and heatmaps. The articulating surface was selected as a region of interest. RESULTS: The median left-right difference was 0.57 mm (IQR, 0.38 - 0.85 mm) of the entire tibial plafond and 0.53 mm (IQR, 0.37 - 0.76 mm) of the articulating surface. The area with the greatest left-right differences were the medial malleoli and the anterior tubercle of the tibial plafond. CONCLUSION: The tibial plafond exhibits a high degree of bilateral symmetry. Therefore, the mirrored unfractured tibial plafond may be used as a template to optimize preoperative surgical reduction using 3DVP techniques in patients with pilon fractures.
RESUMEN
BACKGROUND: Medial patellofemoral ligament (MPFL) reconstruction is associated with high complication rates because of graft overloading from incorrect graft positioning. To improve clinical outcomes, it is crucial to gain a better understanding of MPFL elongation patterns. PURPOSE: To assess MPFL length changes in healthy knees from 0° to 90° of dynamic flexion and their relationship with anatomic parameters of the patellofemoral joint. STUDY DESIGN: Descriptive laboratory study. METHODS: Dynamic computed tomography scans of an active flexion-extension-flexion movement in 115 knees from 63 healthy participants were evaluated to construct knee joint models. Using these models, the MPFL length was measured as the shortest wrapping path from the Schöttle point on the femur to 3 insertion points on the superomedial border of the patella (proximal, central, and distal). MPFL length changes (%) relative to the length in full extension were calculated, and their correlations with the tibial tuberosity-trochlear groove distance, Caton-Deschamps index, and lateral trochlear inclination were analyzed. RESULTS: The proximal fiber was the longest in full extension and progressively decreased to a median length of -6.0% at 90° of flexion. The central fiber exhibited the most isometric pattern during knee flexion, showing a median maximal decrease of 2.8% relative to the full extension length and no evident elongation. The distal fiber first slightly decreased in length but increased at deeper flexion angles. The median overall length changes were 4.6, 4.7, and 5.7 mm for the proximal, central, and distal patellar insertion, respectively. These values were either not or very weakly correlated with the tibial tuberosity-trochlear groove distance, Caton-Deschamps index, and lateral trochlear inclination when the anatomic parameters were within the healthy range. CONCLUSION: The median MPFL length changed by approximately 5 mm between 0° and 90° of flexion. Proximally, the length continuously decreased, indicating slackening behavior. Distally, the length increased at deeper flexion angles, indicating tightening behavior. CLINICAL RELEVANCE: In MPFL reconstruction techniques utilizing the Schöttle point to establish the femoral insertion, one should avoid distal patellar insertion, as it causes elongation of the ligament, which may increase the risk for complications due to overloading.
Asunto(s)
Luxación de la Rótula , Articulación Patelofemoral , Humanos , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Ligamentos Articulares/diagnóstico por imagen , Ligamentos Articulares/cirugía , Articulación Patelofemoral/diagnóstico por imagen , Articulación Patelofemoral/cirugía , Fémur/diagnóstico por imagen , Fémur/cirugía , Rótula/cirugía , Tomografía Computarizada por Rayos X , Luxación de la Rótula/cirugíaRESUMEN
BACKGROUND: Accurate assessment of knee kinematics is important in the diagnosis and quantification of knee disorders and to determine the effect of orthopaedic interventions. Despite previous studies showing the usefulness of dynamic imaging and providing valuable insights in knee kinematics, dynamic imaging is not widely used in clinics due to a variety of causes. In this study normative knee kinematics of 100 healthy subjects is established using a fully automatic workflow feasible for use in the clinic. METHODS: One-hundred volunteers were recruited and a dynamic CT scan was made during a flexion extension movement. Image data was automatically segmented and dynamic and static images were superimposed using image registration. Coordinate systems for the femur, patella and tibia were automatically calculated as well as their dynamic position and orientation. RESULTS: Dynamic CT scans weremade withan effective radiation dose of 0.08 mSv. The median tibial internal rotation was 4° and valgus rotation is 5° at full flexion. Femoral rollback of the lateral condyle was 7 mm versus 2 mm of the medial condyle. The median patella flexion reached 65% of tibiofemoral flexion and the median tilt and rotation were 5° and 0° at full flexion, respectively. The median mediolateral translation of the patella was 3 mm (medially) in the first 30° of flexion. CONCLUSION: The current study presents TF and PF kinematic data of 97 healthy individuals, providing a unique dataset of normative knee kinematics. The short scanning time, simple motion and, automatic analysis make the methods presented suitable for daily clinical practice.
Asunto(s)
Articulación de la Rodilla , Rodilla , Humanos , Voluntarios Sanos , Fenómenos Biomecánicos , Articulación de la Rodilla/diagnóstico por imagen , Fémur/diagnóstico por imagen , Tibia/diagnóstico por imagen , Rango del Movimiento Articular , Tomografía Computarizada por Rayos XRESUMEN
PURPOSE: This study aims to investigate the symmetry of the left and right tibial plateau in young healthy individuals to determine whether left-right mirroring can be reliably used to optimize preoperative 3D virtual planning for patients with tibial plateau fractures. METHODS: One hundred healthy subjects, without previous knee surgery, severe knee trauma, or signs of osteoarthritis were included for a previous dynamic imaging study of the knee. The subjects underwent a CT scan, scanning the left and right knee with a slice thickness of 0.8 mm. 3D surface models of the femur, patella, and tibia were created using a convolutional neural network. The 3D models of the left and right tibias were exported to MATLAB © and the tibias were mirrored. The mirrored tibias were superimposed on the contralateral tibia using a coherent point drift surface matching algorithm. Correspondence points on both surfaces were established, the mean root squared distance was calculated and visualized in a boxplot and heatmaps. RESULTS: The overall mean difference between correspondence points on the left and right tibial plateau is 0.6276 ± 0.0343 mm. The greatest differences between correspondence points were seen around two specific surfaces on the outside of the tibial plateau; where the distal tibia was cut 15 mm below the tibial plateau and around the tibiofibular joint. CONCLUSIONS: The differences between the left and right tibial plateau are small and therefore, we can be confident that the mirrored contralateral, unfractured, tibial plateau can be used as a template for 3D virtual preoperative planning for young patients without previous damage to the knee.
Asunto(s)
Tibia , Fracturas de la Tibia , Humanos , Tibia/diagnóstico por imagen , Fracturas de la Tibia/diagnóstico por imagen , Fracturas de la Tibia/cirugía , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Fémur , RótulaRESUMEN
Patellofemoral instability is a motion related disease, featured as the patella dislocating from the trochlear groove. Four dimensional computed tomography (4DCT) enables full assessment of the patellofemoral movement. Nevertheless, the quantitative measurements of patellofemoral instability are still under research and currently of limited practical use. The aim of this study is to develop a robust and semi-automatic workflow to quantitatively describe the patellofemoral movement in a patient group of eight suffering from patellofemoral instability. The initial results show agreement with manual observations of the tibial tubercle - trochlear groove (TT-TG) distance in routine practice, and the possibility to evaluate both TT-TG distance and patellar centre - trochlear groove (PC-TG) distance dynamically during active flexion-extension-flexion movement of the knee.