Development of poly (lactic-co-glycolic acid) (PLGA) based implants using hot melt extrusion (HME) for sustained release of drugs: The impacts of PLGA's material characteristics.

Hot melt extrusion (HME) processed Poly (lactic-co-glycolic acid) (PLGA) implant is one of the commercialized drug delivery products, which has solid, well-designed shape and rigid structures that afford efficient locoregional drug delivery on the spot of interest for months. In general, there are a variety of material, processing, and physiological factors that impact the degradation rates of PLGA-based implants and concurrent drug release kinetics. The objective of this study was to investigate the impacts of PLGA's material characteristics on PLGA degradation and subsequent drug release behavior from the implants. Three model drugs (Dexamethasone, Carbamazepine, and Metformin hydrochloride) with different water solubility and property were formulated with different grades of PLGAs possessing distinct co-polymer ratios, molecular weights, end groups, and levels of residual monomer (high/ViatelTM and low/ ViatelTM Ultrapure). Physicochemical characterizations revealed that the plasticity of PLGA was inversely proportional to its molecular weight; moreover, the residual monomer could impose a plasticizing effect on PLGA, which increased its thermal plasticity and enhanced its thermal processability. Although the morphology and microstructure of the implants were affected by many factors, such as processing parameters, polymer and drug particle size and distribution, polymer properties and polymer-drug interactions, implants prepared with ViatelTM PLGA showed a smoother surface and a stronger PLGA-drug intimacy than the implants with ViatelTM Ultrapure PLGA, due to the higher plasticity of the ViatelTM PLGA. Subsequently, the implants with ViatelTM PLGA exhibited less burst release than implants with ViatelTM Ultrapure PLGA, however, their onset and progress of the lag and substantial release phases were shorter and faster than the ViatelTM Ultrapure PLGA-based implants, owing to the residual monomer accelerated the water diffusion and autocatalyzed PLGA hydrolysis. Even though the drug release profiles were also influenced by other factors, such as composition, drug properties and polymer-drug interaction, all three cases revealed that the residual monomer accelerated the swelling and degradation of PLGA and impaired the implant's integrity, which could negatively affect the subsequent drug release behavior and performance of the implants. These results provided insights to formulators on rational PLGA implant design and polymer selection.

Bioresorbable Polyester Coatings with Antifouling and Antimicrobial Properties for Prevention of Biofilm Formation in Early Stage Infections on Ti6Al4V Hard-Tissue Implants.

Implants made from titanium are used as prostheses because of their biocompatibility and their mechanical properties close to those of human bone. However, the risk of bacterial infection is always a major concern during surgery, and the development of biofilm can make these infections difficult to treat. A promising strategy to mitigate against bacterial infections is the use of antifouling and antimicrobial coatings, where bioresorbable polymers can play an important role due to their controlled degradability and sustained drug release, as well as excellent biocompatibility. In the present study, poly(d,l-lactide) (PDLLA) and poly[d,l-lactide-co-methyl ether poly(ethylene glycol)] (PDLLA-PEG) were studied, varying the PEG content (20-40% w/w) to analyze the effectiveness of PEG as an antifouling molecule. In addition, silver sulfadiazine (AgSD) was used as an additional antimicrobial agent with a concentration ≤5% w/w and incorporated into the PEGylated polymers to create a polymer with both antifouling and antimicrobial properties. Polymers synthesized were applied using spin coating to obtain homogeneous coatings to protect samples made from titanium/aluminum/vanadium (Ti6Al4V). The polymer coatings had a smoothing effect in comparison to that of the uncoated material, decreasing the contact area available for bacterial colonization. It was also noted that PEG addition into the polymeric chain developed amphiphilic materials with a decrease in contact angle from the most hydrophobic (Ti6Al4V) to the most hydrophilic PDLLA-PEG (60/40), highlighting the increase in water uptake contributing to the hydration layer formation, which confers the antifouling effect on the coating. This study demonstrated that the addition of PEG above 20% w/w and AgSD above 1% w/v into the formulation was able to decrease bacterial adherence against clinically relevant biofilm former strains Staphylococcus aureus and Pseudomonas aeruginosa.

Excipients in Pharmaceutical Additive Manufacturing: A Comprehensive Exploration of Polymeric Material Selection for Enhanced 3D Printing.

This review provides a comprehensive overview of additive manufacturing (AM) or 3D-printing (3DP) applications in the pharmaceutical industry, with a particular focus on the critical role of polymer selection. By providing insights into how material properties influence the 3DP process and the quality of the final product, this review aims to contribute to a better understanding of the interplay between polymers and pharmaceutical 3DP. As 3DP technologies are increasingly integrated into pharmaceutical sciences, this review contributes insights into the nuanced process of polymer selection, serving mainly as a foundational guide for researchers and formulators new to the subject seeking to harness the full potential of pharmaceutical 3DP by understanding the physicochemical properties, roles, and functions of used polymers in 3D-printed dosage forms and medical devices.

Optimizing twin-screw melt granulation: The role of overflight clearance on granulation behavior.

Twin-screw melt granulation (TSMG) relies on the dispersive and distributive mixing at the kneading zone for granule growth to happen highlighting the critical role played by the kneading elements in TSMG. Despite extensive research conducted on the impact of screw geometry in melt compounding, there is not enough literature for TSMG. Disc width for the kneading elements was 2 mm, contrary to the standard 5 mm. The objective of this study was to evaluate if varying overflight clearance (OC) can alter the paradigm for TSMG. The new elements reduce the peak shear at kneading zone however a higher barrel temperature and degree of fill (DoF) is required to compensate to attain similar granule attributes. The change in DoF was achieved through a combination of modified screw configuration to pre-densify powders before kneading and processing at a lower screw speed. Despite the higher barrel temperature, process optimization of thermally unstable gabapentin was carried out. Using the new elements, compressible granules (Tensile strength > 2 MPa) with low % GABA-L content were manufactured despite increasing OC to 0.4 mm. Granule stability at 40 °C, ambient humidity for 6 months indicated gabapentin was stable (% GABA-L ≪0.4 %) despite a high barrel temperature of 120 °C.

Physicochemical changes and chemical degradation of gliclazide during twin-screw melt granulation.

Using a miscible model formulation consisting of 80% gliclazide (GLZ) and 20% hydroxypropyl cellulose, we investigate how the twin-screw melt granulation process affects the chemical stability and process-induced physicochemical changes of the drug. No degradation was observed in the conveying section that leads to kneading element. Approximately 1/3 of the GLZ degradant was generated at the kneading section, while the remaining 2/3 was generated in the conveying section post-kneading and during cooling outside the barrel. A strong correlation was observed between the overall degradation and the temperature of the granules at the barrel exit. In the kneading section, the degradant content correlates best with the specific mechanical energy. With higher specific mechanical energies, the size of the GLZ crystals was reduced further, resulting in more surface defects. In the section post-kneading element, GLZ degradation correlates best with the granule temperature measured at the kneading section. This knowledge of drug degradation during twin-screw melt granulation can be used to develop processing strategies to maintain drug stability during and post processing.

Development of an amorphous based sustained release system for apremilast a selective phosphodiesterase 4 (PDE4) inhibitor.

Apremilast is a selective PDE4 inhibitor and has been approved for several inflammatory disorders. It is classified as a BCS-IV drug and has 7 polymorphic forms. In this research we report the development of an ASD based sustained-release (SR) drug delivery system. A simplified material sparing ASD formulation approach was employed to identify ideal carrier polymers for optimum drug loadings. HPMCAS-M at 20% and Copovidone at 40% drug loadings were selected as the lead formulations. A stable single-phase amorphous system of apremilast via spray drying was created and fully characterized by mDSC, XRPD, DMA, micro-dissolution, dissolution, and accelerated stability analysis. Micro-dissolution study of ASD confirmed attainment and maintenance of supersaturated state over 3 h. ASD showed 8-fold higher solubility relative to its crystalline counterpart. Novel monolithic and bilayer SR HPMC tablet matrices containing 30 mg or 60 mg of ASD system were manufactured. Tablets during dissolution exhibited gradual swelling, erosion, and disentanglement over 15-20-hours with over 90% drug released. The designed SR amorphous based matrix system showed ability to increase apremilast solubility, dissolution rate, and inhibit recrystallization or polymorphic interconversion by stabilizing its amorphous form. This new development may allow for once-daily drug administration and improve both bioavailability and patient compliance.

Hot-melt extrusion based sustained release ibrutinib delivery system: An inhibitor of Bruton's Tyrosine Kinase (BTK).

Ibrutinib (IB) is the first Bruton s tyrosine kinase (BTK) inhibitor classified as BCS class-II, with multiple polymorphic forms. Development of its amorphous solid dispersion (ASD) is an effective approach to overcome drug's poor solubility and concerns regarding metastable polymorphic forms. In this work, Hot Melt Extrusion (HME) was used to develop robust ASD of ibrutinib and copovidone at different ratios. The ASDs were blended with a swellable crosslinked super-disintegrant and compressed into a sustained-release (SR) matrix. ASDs representing drug loadings of 20%, 40%, and 60% showed broad, amorphous "halos" and absence of an endotherm as revealed by X-ray powder diffraction (XRPD) and modulated differential scanning calorimetry (mDSC). Using dynamic oscillatory rheology, storage modulus, and viscosities versus temperature confirmed formation of a homogeneous dispersion with a manifestation of plasticizing effect of API. Micro-dissolution testing of ASDs in fasted state simulated intestinal fluid (FaSSIF) demonstrated >70% drug release compared to the saturation solubility of crystalline IB. Results of USP dissolution testing of SR tablets exhibited a desirable sustained delivery up to six hours with >88% drug release versus 34% release from tablets containing crystalline ibrutinib. Co-existence of ASD within the hydrating matrix provided unhindered drug release and release duration.

Influence of Plasdone™ S630 Ultra-an Improved Copovidone on the Processability and Oxidative Degradation of Quetiapine Fumarate Amorphous Solid Dispersions Prepared via Hot-Melt Extrusion Technique.

In a formulation, traces of peroxides in copovidone can impact the stability of drug substances that are prone to oxidation. The present study aimed to investigate the impact of peroxides in novel Plasdone™ S630 Ultra and compare it with regular Plasdone™ S630 on the oxidative degradation of quetiapine fumarate amorphous solid dispersions prepared via hot-melt extrusion technique. The miscibility of copovidones with drug was determined using the Hansen solubility parameter, and the results indicated a miscible drug-polymer system. Melt viscosity as a function of temperature was determined for the drug-polymer physical mixture to identify the suitable hot-melt extrusion processing temperature. The binary drug and polymer (30:70 weight ratio) amorphous solid dispersions were prepared at a processing temperature of 160°C. Differential scanning calorimetry and Fourier transform infrared spectroscopy studies of amorphous solid dispersions revealed the formation of a single-phase amorphous system with intermolecular hydrogen bonding between the drug and polymer. The milled extrudates were compressed into tablets by using extragranular components and evaluated for tabletability. Stability studies of the milled extrudates and tablet formulations were performed to monitor the oxidative degradation impurity (N-oxide). The N-oxide impurity levels in the quetiapine fumarate - Plasdone™ S630 Ultra milled extrudates and tablet formulations were reduced by 2- and 3-folds, respectively, compared to those in quetiapine fumarate - Plasdone™ S630. The reduced oxidative degradation and improved hot-melt extrusion processability of Plasdone™ S630 Ultra make it a better choice for oxidation-labile drugs over Plasdone™ S630 copovidone.

How Does the Dissimilarity of Screw Geometry Impact Twin-screw Melt Granulation?

Using a model formulation of 80% gabapentin and 20% hydroxypropyl cellulose (KlucelTM), we investigate how differences in the geometry of mixing elements in the Leistritz Nano-16 and Micro-18 extruders affect granulation mechanisms and the properties of the resulting granules. Two extruders, Leistritz Nano-16 and Micro-18, commonly used in development and manufacturing, respectively, were used. The kneading blocks of the Nano-16 extruder are less efficient in dispersive mixing than the kneading blocks of the Micro-18 due to the thinner discs (2.5 mm wide) of the Nano-16. Therefore, our model formulation could be granulated only under a higher degree of fill (DF) by enhancing the axial compaction and heating of the barrel. In contrast, the thicker (5 mm wide) kneading blocks of the Micro-18 extruder provide efficient dispersive mixing that enables granulation without axial compaction and barrel heating. The higher specific mechanical energy (SME) achieved at higher screw speeds and lower feed rates led to more granulation. Because of the difference in granulation mechanisms between the two extruders, critical processing parameters also differed. Tabletability and degradant content of granules correlated positively with DF for the Nano-16 but with SME for the Micro-18 extruder.

Stable amorphous solid dispersions of fenofibrate using hot melt extrusion technology: Effect of formulation and process parameters for a low glass transition temperature drug.

Development of stable amorphous solid dispersions (ASDs) for a low glass transition temperature (Tg) drug is a challenging task. The physico-chemical properties of the drug and excipients play a critical role in developing stable ASDs. In this study, ASDs of poorly soluble fenofibrate, a drug with a low Tg, were formulated using hydroxy propyl methylcellulose acetate succinate (HPMCAS) via hot melt extrusion (HME). The feasible processing conditions were established at varying drug loads and processing temperatures. The prepared ASDs were characterized for crystallinity using differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD). Fourier transform-infrared spectroscopy was performed to study the potential interactions. DSC and PXRD studies confirmed the amorphous state of fenofibrate in the prepared ASDs. A discriminative in vitro dissolution method was established to study the impact of HPMCAS grades on dissolution profile. The dissolution parameters such as dissolution efficiency, initial dissolution rate and mean dissolution rate, suggested improved dissolution characteristics compared to pure fenofibrate. Accelerated stability studies at 40 °C/75% RH showed preservation of the amorphous nature of fenofibrate in formulations with 15% drug load and in vitro drug release studies indicated similar release profiles (f2 >50). This study provides an insight into the formulation and processing of ASDs for poorly soluble drugs with low Tg.

Fabrication of Taste-Masked Donut-Shaped Tablets Via Fused Filament Fabrication 3D Printing Paired with Hot-Melt Extrusion Techniques.

The objective of this work was to develop taste-masked donut-shaped tablet formulations utilizing fused filament fabrication three-dimensional printing paired with hot-melt extrusion techniques. Caffeine citrate was used as the model drug for its bitter taste, and a 3-point bend test was performed to assess the printability of filaments. The stiffness constant was calculated to represent the printability by fitting the breaking distances and stress data into Hooke's law. The formulations without Eudragit E PO (F6) and with Eudragit E PO (F7) filaments exhibited the desired hardness with a "k" value of 48.30 ± 3.52 and 45.47 ± 3.51 g/mm3 (n = 10), respectively, and were successfully printed. The donut-shaped tablets were 3D printed with 10, 50, and 100% infill densities. In vitro dissolution studies were performed in simulated salivary fluid (pH 6.8, artificial saliva) to evaluate the taste-masking efficiency of the printed donuts. In the first minute, the concentrations of caffeine citrate observed in the dissolution media from all the printed donuts were less than the bitter threshold of caffeine citrate (0.25 mg/mL). Formulation F7, which contained Eudragit E PO copolymer, demonstrated better taste-masking efficiency than formulation F6. Furthermore, both formulations F6 and F7 demonstrated immediate drug release profiles in gastric medium (10% infill, > 80% release within 1 h). Taste-masked caffeine citrate formulations were successfully developed with donut shapes, which will enhance appeal in pediatric populations and increase compliance and patient acceptance of the dosage form.

Effect of Hydroxypropyl Cellulose Level on Twin-Screw Melt Granulation of Acetaminophen.

This study investigated the effect of binder level on the physicochemical changes and tabletability of acetaminophen (APAP)-hydroxypropyl cellulose (HPC) granulated using twin-screw melt granulation. Even at 5% HPC level, the tablet tensile strength achieved up to 3.5 MPa. A minimum of 10% HPC was required for the process robustness. However, 20% HPC led to tabletability loss, attributable to the high mechanical strength of APAP granules. The over-granulated APAP granules had thick connected HPC scaffold and low porosity. Consequently, these granules were so strong that they underwent a lower degree of fracture under compression and higher elastic recovery during decompression. HPC was enriched on the surface of APAP extrudates at all HPC levels. Amorphous APAP was also observed on the extrudate surface at 20% HPC level, and it recrystallized within 24 h storage. To achieve a robust process and optimal improvement in APAP tabletability, the preferred HPC level was 10 to 15%.

Hypromellose acetate succinate based amorphous solid dispersions via hot melt extrusion: Effect of drug physicochemical properties.

In this study, the impact of drug and hydroxypropyl methylcellulose acetate succinate (HPMCAS) grades physicochemical properties on extrusion process, dissolution and stability of the hot melt extruded amorphous solid dispersions (ASDs) of nifedipine and efavirenz was investigated. Incorporation of drugs affected the extrusion temperature required for solid dispersion preparation. Differential scanning calorimetry and powder X-ray diffraction studies confirmed the amorphous conversion of the drugs in the prepared formulations. The amorphous nature of ASDs was unchanged after 3 months of stability testing at 40 °C and 75% relative humidity. The dissolution efficiency of the ASDs was dependent on the log P of the drug. The inhibitory effect of HPMCAS on drug precipitation was dependent on the hydrophobic interactions between drug and polymer, polymer grade, and dose of the drug. The dissolution efficiency and dissolution rate of the ASDs were dependent on the log P of the drug and solubility and hydrophilicity of the polymer grade respectively. The inhibitory effect of HPMCAS on drug precipitation was dependent on the hydrophobic interactions between drug and polymer, polymer grade, and the dissolution dose of the drug.

Taste masking and rheology improvement of drug complexed with beta-cyclodextrin and hydroxypropyl-ß-cyclodextrin by hot-melt extrusion.

This study aimed to mask fluconazole (FLU) taste and improve its rheological properties by an efficient process of cyclodextrin complexation. For this, hot-melt extrusion (HME) was used to obtain extrudates composed of FLU, hydroxypropylcellulose, and one of two different cyclodextrins (ß-cyclodextrin or hydroxypropyl-ß-cyclodextrin) maintaining the drug:cyclodextrin molar ratio at 1:0.3 or 1:0.2, respectively. Samples were characterized by physicochemical tests, palatability using e-tongue and antifungal assays. Drug stability was preserved after HME, according to spectroscopy test (correlation coefficient >0.9) and HPLC-assay (100-107%). Flowability was improved in HME systems with compressibility of <12%. Similarly, floodability exhibited significant enhancement (dispersibility <10%). Whereas extrudates of FLU containing only the polymeric matrix led to a slow drug dissolution efficiency (18.6%) and a partial drug taste masking; extrudates containing cyclodextrin accelerated FLU dissolution (dissolution efficiency approx. 30%) and provided a complete drug taste masking. Moreover, HME process could produce drug complexes with high complexation efficiency and preserve its antifungal activity.

Hot Melt Extrudates Formulated Using Design Space: One Simple Process for Both Palatability and Dissolution Rate Improvement.

This work aimed at obtaining an optimized itraconazole (ITZ) solid oral formulation in terms of palatability and dissolution rate by combining different polymers using hot melt extrusion (HME), according to a simplex centroid mixture design. For this, the polymers Plasdone® (poly(1-vinylpyrrolidone-co-vinyl acetate) [PVP/VA]), Klucel® ELF (2-hydroxypropyl ether cellulose [HPC]), and Soluplus® (SOL, polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol) were processed using a laboratory HME equipment operating without recirculation at constant temperature. Samples were characterized by physicochemical assays, as well as dissolution rate and palatability using an e-tongue. All materials became homogeneous and dense after HME processing. Thermal and structural analyses demonstrated drug amorphization, whereas IR spectroscopy evidenced drug stability and drug-excipient interactions in HME systems. Extrudates presented a significant increase in dissolution rate compared to ITZ raw material, mainly with formulations containing PVP/VA and HPC. A pronounced improvement in taste masking was also identified for HME systems, especially in those containing higher amounts of SOL and HPC. Data showed polymers act synergistically favoring formulation functional properties. Predicted best formulation should contain ITZ 25.0%, SOL 33.2%, HPC 28.9%, and PVP/VA 12.9% (w/w). Optimized response considering dissolution rate and palatability reinforces the benefit of polymer combinations.

Amorphous-based controlled-release gliclazide matrix system.

The aim of this study was to develop a hydrophilic oral controlled release system (CRS) using the amorphous form of gliclazide, a BCS class II compound, listed on the WHO list of essential medicines. For this purpose, spray-dried dispersions (SDDs) of gliclazide were produced using various grades of hydroxypropyl methylcellulose acetate succinate (HPMCAS) or copovidone as carrier under fully automated conditions. The solid-state properties of prepared SDDs were characterized using X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), modulated differential scanning calorimetry (MDSC), and Fourier transform infrared spectroscopy (FTIR). Supersaturated micro-dissolution testing of SDDs in fasted state-simulated intestinal fluid showed prolonged supersaturation state, with solubility increases of 1.5- to 4.0-fold. Solubility and stability characteristics of the most desirable SDDs in terms of relative dissolution area under the curves (AUCs) (AUC(SDD)/AUC(crystalline)) and stable supersaturated state concentration ratio up to 180 min (C180/Cmax) were determined. The optimized gliclazide-SDD amorphous forms were included into matrix tablets with HPMC blends using compaction simulator. Developed matrix systems were subjected to standard USP dissolution testing. Dissolution profiles obtained were linear with different slopes indicating varying rates of dissolution. Six-month storage stability testing was performed, and dissolution profiles remained stable with "similarity factor" (f 2 = 85). Results show that the use of various HPMCAS as a drug carrier in the spray-drying process produces homogeneous single-phase SDDs which are stable and promising for inclusion into HPMC-based hydrophilic matrix systems.

Supersaturated controlled release matrix using amorphous dispersions of glipizide.

Spray dried dispersions (SDDs) of glipizide, a BCS Class II model drug, were prepared using various grades of hydroxypropyl methylcellulose acetate succinate (HPMCAS) and copovidone S-630 as carriers. The SDDs appeared as a single amorphous phase with up to 60% drug loading level as revealed by X-ray powder diffraction (XRPD), modulated differential scanning calorimetry (mDSC) and scanning electron microscopy (SEM). Supersaturated micro-dissolution testing of various SDDs in fasted state simulated intestinal fluid showed prolonged supersaturation state (up to 180min) with solubility increases of 5.2-13.9 fold relative to crystalline drug under similar conditions. Solubility and stability characteristics of the most desirable SDDs in terms of relative dissolution AUCs (AUC(SDD)/AUC(crystalline)) and supersaturated concentration ratios (C180/Cmax) were determined. Results show that HPMCAS-based SDDs achieve a higher degree of supersaturation compared to Copovidone S-630 and that SDDs comprising HPMCAS-M and HPMCAS-H maintained stable supersaturated concentration. Dissolution data showed that SDD-loaded CR tablets provide stable supersaturated concentration within the hydrated matrix with increased rate and extent of drug dissolution over 24h. Co-existence of HPMCAS and HPMC within the hydrating matrix showed strong suppression of drug crystallization and allowed achievement of zero-order and slow-first order release kinetics.

Development of carvedilol-cyclodextrin inclusion complexes using fluid-bed granulation: a novel solid-state complexation alternative with technological advantages.

OBJECTIVES: This study sought to evaluate the achievement of carvedilol (CARV) inclusion complexes with modified cyclodextrins (HPßCD and HPγCD) using fluid-bed granulation (FB). METHODS: The solid complexes were produced using FB and spray drying (SD) and were characterised by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction, SEM, flowability and particle size analyses and in vitro dissolution. KEY FINDINGS: The DSC, FTIR and powder X-ray diffraction findings suggested successful CARV inclusion in the modified ß- and γ-cyclodextrins, which was more evident in acidic media. The CARV dissolution rate was ~7-fold higher for complexes with both cyclodextrins prepared using SD than for raw CARV. Complexes prepared with HPßCD using FB also resulted in a significant improvement in dissolution rate (~5-fold) and presented superior flowability and larger particle size. CONCLUSIONS: The findings suggested that FB is the best alternative for large-scale production of solid dosage forms containing CARV. Additionally, the results suggest that HPγCD could be considered as another option for CARV complexation because of its excellent performance in inclusion complex formation in the solid state.

Influence of pressurized carbon dioxide on ketoprofen-incorporated hot-melt extruded low molecular weight hydroxypropylcellulose.

OBJECTIVES: The aim of the current research project was to investigate the effect of pressurized carbon dioxide (P-CO2) on the physico-mechanical properties of ketoprofen (KTP)-incorporated hydroxypropylcellulose (HPC) (Klucel™ ELF, EF, and LF) produced using hot-melt extrusion (HME) techniques and to assess the plasticization effect of P-CO2 on the various polymers tested. METHODS: The physico-mechanical properties of extrudates with and without injection of P-CO2 were examined and compared with extrudates with the addition of 5% liquid plasticizer of propylene glycol (PG). The extrudates were milled and compressed into tablets. Tablet characteristics of the extrudates with and without injection of P-CO2 were evaluated. RESULTS AND CONCLUSION: P-CO2 acted as a plasticizer for tested polymers, which allowed for the reduction in extrusion processing temperature. The microscopic morphology of the extrudates was changed to a foam-like structure due to the expansion of the CO2 at the extrusion die. The foamy extrudates demonstrated enhanced KTP release compared with the extrudates processed without P-CO2 due to the increase of porosity and surface area of those extrudates. Furthermore, the hardness of the tablets prepared by foamy extrudates was increased and the percent friability was decreased. Thus, the good binding properties and compressibility of the extrudates were positively influenced by utilizing P-CO2 processing.