Type IV collagen is a novel DEJ biomarker that is reduced by radiotherapy.

The dental basement membrane (BM) is composed of collagen types IV, VI, VII, and XVII, fibronectin, and laminin and plays an inductive role in epithelial-mesenchymal interactions during tooth development. The BM is degraded and removed during later-stage tooth morphogenesis; however, its original position defines the location of the dentin-enamel junction (DEJ) in mature teeth. We recently demonstrated that type VII collagen is a novel component of the inner enamel organic matrix layer contiguous with the DEJ. Since it is frequently co-expressed with and forms functional complexes with type VII collagen, we hypothesized that type IV collagen should also be localized to the DEJ in mature human teeth. To identify collagen IV, we first evaluated defect-free erupted teeth from various donors. To investigate a possible stabilizing role, we also evaluated extracted teeth exposed to high-dose radiotherapy--teeth that manifest post-radiotherapy DEJ instability. We now show that type IV collagen is a component within the morphological DEJ of posterior and anterior teeth from individuals aged 18 to 80 yr. Confocal microscopy revealed that immunostained type IV collagen was restricted to the 5- to 10-µm-wide optical DEJ, while collagenase treatment or previous in vivo tooth-level exposure to > 60 Gray irradiation severely reduced immunoreactivity. This assignment was confirmed by Western blotting with whole-tooth crown and enamel extracts. Without reduction, type IV collagen contained macromolecular α-chains of 225 and 250 kDa. Compositionally, our results identify type IV collagen as the first macromolecular biomarker of the morphological DEJ of mature teeth. Given its network structure and propensity to stabilize the dermal-epidermal junction, we propose that a collagen-IV-enriched DEJ may, in part, explain its well-known fracture toughness, crack propagation resistance, and stability. In contrast, loss of type IV collagen may represent a biochemical rationale for the DEJ instability observed following oral cancer radiotherapy.

Addition of Grape Seed Extract Renders Phosphoric Acid a Collagen-stabilizing Etchant.

Previous studies found that grape seed extract (GSE), which is rich in proanthocyanidins, could protect demineralized dentin collagen from collagenolytic activities following clinically relevant treatment. Because of proanthocyanidin's adverse interference to resin polymerization, it was believed that GSE should be applied and then rinsed off in a separate step, which in effect increases the complexity of the bonding procedure. The present study aimed to investigate the feasibility of combining GSE treatment with phosphoric acid etching to address the issue. It is also the first attempt to formulate collagen-cross-linking dental etchants. Based on Fourier-transformed infrared spectroscopy and digestion assay, it was established that in the presence of 20% to 5% phosphoric acid, 30 sec of GSE treatment rendered demineralized dentin collagen inert to bacterial collagenase digestion. Based on this positive result, the simultaneous dentin etching and collagen protecting of GSE-containing phosphoric acid was evaluated on the premise of a 30-second etching time. According to micro-Raman spectroscopy, the formulation containing 20% phosphoric acid was found to lead to overetching. Based on scanning and transmission electronic microscopy, this same formulation exhibited unsynchronized phosphoric acid and GSE penetration. Therefore, addition of GSE did render phosphoric acid a collagen-stabilizing etchant, but the preferable phosphoric acid concentration should be <20%.

Proanthocyanidins rapidly stabilize the demineralized dentin layer.

While proanthocyanidins (PA) are effective in improving collagen's resistance to collagenolytic degradation, the direct incorporation of PA into an adhesive system is detrimental to the light-curing thereof. Conversely, the use of PA as a primer could circumvent this issue, but little is known about the efficacy of PA in stabilizing collagen when applied in a clinically relevant manner. This study investigated the pre- and post-digestion morphology of an acid-etched dentin collagen layer that underwent PA treatment for time periods on a scale of seconds. The null hypothesis, that there is no difference between the PA-treated and untreated control group, had to be rejected, since it was revealed that the untreated control could not survive 1 hr of exogenous collagenase digestion, while the PA-treated collagen could sustain at least 16 hrs of digestion with no perceptible changes in collagen structure. In addition, the stabilizing effect of the gold-standard cross-linker glutaraldehyde at comparable experimental conditions was found to be almost non-existent within the 5, 15, or 30 sec of cross-linking permitted. Therefore, PA have been proven to be extraordinarily efficient in stabilizing demineralized dentin collagen against enzymatic challenges in a clinically relevant setting, likely due to the non-covalent nature of their interaction with collagen molecules.

DMP1-targeted Cre expression in odontoblasts and osteocytes.

Odontoblasts in dentin and osteocytes in bone contain dendritic processes. To test if their dendrites share a common feature, we compared their cellular morphology as visualized using scanning electron microscopy. Analysis of our data showed that both cells share an identical dendritic canalicular system and express extensive processes forming a complex network within the mineralized matrix. Because dentin matrix protein 1 (DMP1), an extracellular matrix protein, is highly expressed in both types of cells, we next tested, using a transgenic approach, whether a 9.6-kb Dmp1 promoter-4-kb 1st intron would be able to target Cre cDNA in these cells for expression/deletion of other genes in odontoblasts and osteocytes. We determined the specificity and efficiency of Cre activity by crossing Dmp1-Cre mice with ROSA26 reporter mice. Results showed that odontoblasts and osteocytes were specifically targeted, suggesting that this animal model will be useful for the preferential study of gene functions in both types of cells.

Mechanism by which MLO-A5 late osteoblasts/early osteocytes mineralize in culture: similarities with mineralization of lamellar bone.

The mechanisms whereby bone mineralizes are unclear. To study this process, we used a cell line, MLO-A5, which has highly elevated expression of markers of the late osteoblast such as alkaline phosphatase, bone sialoprotein, parathyroid hormone type 1 receptor, and osteocalcin and will mineralize in sheets, not nodules. In culture, markers of osteocytes and dendricity increase with time, features of differentiation from a late osteoblast to an early osteocyte. Mineral formation was examined using transmission electron microscopy, scanning electron microscopy with energy-dispersive X-ray analysis, and atomic force microscopy. At 3-4 days of culture, spheres of approximately 20-50 nm containing calcium and phosphorus were observed budding from and associated with developing cellular projections. By 5-6 days, these calcified spheres were associated with collagen fibrils, where over time they continued to enlarge and to engulf the collagen network. Coalescence of these mineralized spheres and collagen-mediated mineralization were responsible for the mineralization of the matrix. Similar calcified spheres were observed in cultured fetal rat calvarial cells and in murine lamellar bone. We propose that osteoid-osteocytes generate spherical structures that calcify during the budding process and are fully mineralized on their developing cellular processes. As the cellular process narrows in diameter, these mineralized structures become associated with and initiate collagen-mediated mineralization.

Resin-infiltrated-dentine--a FE-ESEM microscopy investigation.

The formation of a hybrid layer is essential for bonding of dental composites to dentine. The objective of this study was to examine the effects of various etchants/conditioners and dentine bonding systems on dentine surfaces utilising a Field Emission Environmental SEM (FE-ESEM). Twenty one, freshly extracted human molar teeth were utilised. Dentine without resin application was initially observed both wet and dried in the following conditions: (1) fractured surface, (2) smear layer, and (3) smear layer removed with 37% phosphoric acid. Resin infiltration into dentine was then studied after applying Scotchbond 1, Optibond Solo, Prime & Bond NT, or Prompt L-Pop systems. Scotchbond 1, Optibond Solo, and Prime & Bond NT resins penetrated the dentine tubules and created hybrid layers; although, in some cases Prime & Bond NT only created a partially filled hybrid layer. No polymerised resin or hybrid layer was observed for Prompt L-Pop. The FE-ESEM permitted observation of specimens at near in-vivo wet conditions.

Evaluation of demineralized dentin contraction by stereo measurements using environmental and conventional scanning electron microscopy.

Numerous investigations of etched human dentin are performed using scanning electron microscopy (SEM). Usually specimens are fractured and cross sections of etched layers with underlying unaffected dentin are observed. Results from this study showed that the edge of the etched layer contracted and became curved after fracture of wet specimens and that tensile stresses were developed in this layer by acid etching. The degree of contraction was determined utilizing profiles of the specimen edges obtained with the help of stereo measurements. Fixation in glutaraldehyde decreased the contraction in wet specimens prepared for environmental scanning electron microscopy (ESEM). Fixation also decreased shrinkage of the demineralized layer due to gradual desiccation in the ESEM during observation. For conventional SEM, the contraction was minimized if specimens of etched and fixed dentin were fractured in the dry condition after dehydration.

Environmental scanning electron microscopy of hydrated conditioned/etched dentine.

Various etchants/conditioners are used during dental treatment to affect or remove the smear layer. The purpose of this study was to evaluate the effect of different treatments on moist dentine, using a field emission environmental scanning electron microscope (FE-ESEM). Twenty freshly extracted, human molar teeth were utilised. The roots and pulps were removed, and the crowns horizontally sectioned with a low speed diamond saw (Isomet) (with cooling in a saline solution) in order to expose superficial dentine. A smear layer was created on these surfaces by using 600 grit silicone carbide paper. Test surfaces were then treated in one of the following ways: 1. 37% phosphoric acid liquid 2. 37% phosphoric acid gel 3. NRC (non-rinse conditioner) without rinsing 4. NRC with rinsing. Shallow grooves were cut on the untreated sides, using a thin diamond bur. This enabled the samples to be split in half when pressure was applied in the grooves. Samples were maintained moist throughout specimen preparation. Samples were examined in the FE-ESEM (Philips XL 30) in such a way that the effect of the treatment could be viewed occlusally, as well as perpendicular to the treated interface. Phosphoric acid liquid and gel removed the smear layer, and demineralised the dentine for approximately 5-10 micrometers. NRC penetrated the smear layer and modified it to a lesser degree. However, washing of the NRC treated surface removed part of the smear layer, and opened up some dentinal tubules. Excellent resolution was possible with the FE-ESEM in both the wet and dry modes.