A comparative study of moisture adsorption on GO, MOF-5, and GO/MOF-5 composite for applications in atmospheric water harvesting.

Water scarcity is an alarming situation across the globe. Several methods have been reported in the literature to minimize the water shortage problem. Sorbent-based atmospheric water harvesting (SBAWH) is considered an energy-efficient, low-cost strategy, and sustainable approach. In the present study, the synthesis of graphene oxide (GO) was carried out using a modified Hummers' method, while the synthesis of MOF-5 and a GO/MOF-5 composite was carried out using a solvothermal approach. The synthesized materials were characterized by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The phase composition and crystallinity of all synthesized samples were confirmed by XRD analysis. SEM analysis provided information about the surface morphology of all synthesized samples. The adsorption of water vapors on surfaces of GO, MOF-5, and the GO/MOF-5 composite was evaluated by FTIR analysis. The negative charge was explored by the PZC technique on the surface of all synthesized materials. The water adsorption characteristics of GO, MOF-5, and the GO/MOF-5 composite were evaluated using an atmospheric water harvesting (AWH) plant. The maximum adsorption capacity of 542 mg g-1 was achieved by the MOF at 55% RH (relative humidity), while a low adsorption capacity of the MOF was observed at higher humidity values. This problem was overcome by making a GO/MOF-5 composite. GO imparts structural stability to the MOF-5 structure at higher humidity values. The maximum adsorption capacity of 1137 mg g-1 was achieved by the GO/MOF-5 composite at 75% RH. Several isotherm models, such as Langmuir, Freundlich, and Temkin, were applied to confirm the single-site occupation by water molecules and chemisorption behavior. Several thermodynamic properties were calculated, including isosteric heat (Q st), Gibbs free energy (ΔG), and sorption entropy (ΔS). The overall thermodynamics study confirms that the adsorption process is spontaneous and exothermic. In addition, second-order kinetics confirms that all synthesized material shows chemisorption behavior.

Knowledge About Cervical Cancer and Awareness About Human Papillomavirus Vaccination Among Medical Students at the Northern Border University, Arar, Kingdom of Saudi Arabia.

Objectives To evaluate the knowledge and awareness about cervical cancer and human papillomavirus (HPV) vaccination among medical undergraduates at Northern Border University. Methods It was a cross-sectional study done on students selected conveniently from the College of Medicine, Northern Border University, Arar. The data were collected regarding knowledge about HPV infection and vaccine awareness using a validated questionnaire. Results A total of 200 students responded to the questionnaires, with 104 (52%) being male students and 120 (60%) being clinical years of MBBS. The mean knowledge score was 17.12 ± 2.73 out of 24, which was labeled as moderate knowledge about cervical cancer and HPV. Almost two-thirds of the students responded correctly to the etiology and risk factors of cervical cancer, while only half of the students knew the correct screening intervals for cervical cancer. The awareness of students about the HPV vaccine was deficient, and the mean score was estimated to be 4.20 ± 0.79 out of nine. Female students and students in clinical years showed significantly better understanding and awareness about cervical cancer and its vaccine and showed greater vaccine acceptability as compared to male students and students in preclinical years. Conclusion The present study shows moderate knowledge about cervical cancer but deficient awareness of medical students about the HPV vaccine. However, the students were willing to get educated about cervical cancer and its vaccine and showed a favorable opinion towards vaccinating the schoolgirls and educating their patients as future physicians. The information can be considered a benchmark on knowledge and awareness levels and can be utilized to modify medical curricula and develop efficient awareness programs.

Molecular genetics, neuroimaging outcomes, and structural analyses of novel and recurrent variants of WDR62 gene in two consanguineous Pakistani families with autosomal recessive primary microcephaly.

BACKGROUND: Autosomal recessive primary microcephaly (MCPH) is a rare neurodevelopmental and genetically heterogeneous disorder, characterized by small cranium size (> - 3 SD below mean) and often results in varying degree of intellectual disability. Thirty genes have been identified for the etiology of this disorder due to its clinical and genetic heterogeneity. METHODS AND RESULTS: Here, we report two consanguineous Pakistani families affected with MCPH exhibiting mutation in WDR62 gene. The investigation approach involved Next Generation Sequencing (NGS) gene panel sequencing coupled with linkage analysis followed by validation of identified variants through automated Sanger sequencing and Barcode-Tagged (BT) sequencing. The molecular genetic analysis revealed one novel splice site variant (NM_001083961.2(WDR62):c.1372-1del) in Family A and one known exonic variant NM_001083961.2(WDR62):c.3936dup (p.Val1313Argfs*18) in Family B. Magnetic Resonance Imaging (MRI) scans were also employed to gain insights into the structural architecture of affected individuals. Neurological assessments showed the reduced gyral and sulcal patterns along with normal corpus callosum in affected individuals harboring novel variant. In silico assessments of the identified variants were conducted using different tools to confirm the pathogenicity of these variants. Through In silico analyses, both variants were identified as disease causing and protein modeling of exonic variant indicates subtle conformational alterations in prophesied protein structure. CONCLUSION: This study identifies a novel variant (c.1372-1del) and a recurrent pathogenic variant c.3936dup (p.Val1313Argfs*18) in the WDR62 gene among the Pakistani population, expanding the mutation spectrum for MCPH. These findings emphasize the importance of genetic counseling and awareness to reduce consanguinity and address the burden of this disorder.

Synthesis and characterization of X (X = Ni or Fe) modified BaTiO3 for effective degradation of Reactive Red 120 dye under UV-A light and its biological activity.

For the sustainable advancement of industrial expansion that is environmentally conscious, harmful dyes must be removed from wastewater. Untreated effluents containing colors have the potential to harm the ecosystem and pose major health risks to people, animals, and aquatic life. Here, we have fabricated Ni or Fe modified with BaTiO3 materials and effectively utilized them for Reactive Red 120 (RR 120) dye degradation under UV-A light. The synthesized materials were characterized, and their structural, and photo-physical properties were reported. Phase segregation was not present in the XRD pattern, as evidenced by the absence of secondary phase peaks linked to iron, nickel, or oxides. Low metal ion concentrations may be the cause of this, and the presence of those elements was confirmed by XPS measurements. The Raman spectra of the BaTiO3/Ni and BaTiO3/Fe samples show a widened peak at 500 cm-1, which suggests that Ni or Fe are efficiently loaded onto the BaTiO3. RR 120 dye photodegradation under UV light conditions was effectively catalyzed by BaTiO3/Fe, as evidenced by its superior performance in the UV irradiation technique over both BaTiO3 and BaTiO3/Ni. Compared to bare BaTiO3, both metal-modified materials efficiently degraded the RR 120 dye. Acidic pH facilitated the degradation process, which makes sense given that the heterogeneous photo-Fenton reaction was the mechanism of degradation along with BaTiO3 sensitization. High-acidity sewage can be dangerous and carcinogenic, and conventional biological treatment methods are not appropriate for managing it. In the current investigation, it may be used to treat color effluents with extremely low pH levels. Additionally, the ability of the produced nanocomposites to inhibit the growth of twenty pathogens was examined, along with two fungi, fifteen Gram-negative Bacilli (GNB), one Gram-positive Bacilli (GPB), and two Gram-positive Cocci (GBC).

An affordable label-free ultrasensitive immunosensor based on gold nanoparticles deposited on glassy carbon electrode for the transferrin receptor detection.

In recent decades, there has been a concerning and consistent rise in the incidence of cancer, posing a significant threat to human health and overall quality of life. The transferrin receptor (TfR) is one of the most crucial protein biomarkers observed to be overexpressed in various cancers. This study reports on the development of a novel voltammetric immunosensor for TfR detection. The electrochemical platform was made up of a glassy carbon electrode (GCE) functionalized with gold nanoparticles (AuNPs), on which anti-TfR was immobilized. The surface characteristics and electrochemical behaviors of the modified electrodes were comprehensively investigated through scanning electron microscopy, XPS, Raman spectroscopy FT-IR, electrochemical cyclic voltammetry and impedance spectroscopy. The developed immunosensor exhibited robust analytical performance with TfR fortified buffer solution, showing a linear range (LR) response from 0.01 to 3000 µg/mL, with a limit of detection (LOD) of 0.01 µg/mL and reproducibility (RSD <4 %). The fabricated sensor demonstrated high reproducibility and selectivity when subjected to testing with various types of interfering proteins. The immunosensor designed for TfR detection demonstrated several advantageous features, such as being cost-effective and requiring a small volume of test sample making it highly suitable for point-of-care applications.

Non-Enzymatic Glucose Sensors Composed of Polyaniline Nanofibers with High Electrochemical Performance.

The measurement of glucose concentration is a fundamental daily care for diabetes patients, and therefore, its detection with accuracy is of prime importance in the field of health care. In this study, the fabrication of an electrochemical sensor for glucose sensing was successfully designed. The electrode material was fabricated using polyaniline and systematically characterized using scanning electron microscopy, high-resolution transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and UV-visible spectroscopy. The polyaniline nanofiber-modified electrode showed excellent detection ability for glucose with a linear range of 10 µM to 1 mM and a detection limit of 10.6 µM. The stability of the same electrode was tested for 7 days. The electrode shows high sensitivity for glucose detection in the presence of interferences. The polyaniline-modified electrode does not affect the presence of interferences and has a low detection limit. It is also cost-effective and does not require complex sample preparation steps. This makes it a potential tool for glucose detection in pharmacy and medical diagnostics.

Assessment of Liver Transplant Eligibility in Chronic Liver Disease Patients: A Cross-Sectional Study From a Tertiary Care Hospital of Pakistan.

INTRODUCTION: The burden of chronic liver disease (CLD) is increasing globally and the ultimate treatment is a liver transplant. As Pakistan is a developing country, liver transplantation is not easily available due to limited resources. This study aims to assess the patients with CLD for liver transplantation and to find the frequency of eligible candidates for liver transplantation. METHODS: A cross-sectional observational study was conducted on patients with CLD from June 2022 to December 2022. Total bilirubin, serum creatinine complete blood count, serum electrolytes, and international normalised ratio (INR) were done. The Model for End-Stage Liver Disease (MELD) score was calculated and the frequency of eligible patients for liver transplant was determined. Data was entered and analyzed using Statistical Package for Social Sciences (SPSS) version 22 (IBM Corp., Armonk, NY, USA). RESULTS: In our study, 149 patients were enrolled with a mean age of 46.81±15.7 years. There were 58.7% male and 41.6% female patients. The mean duration of liver cirrhosis was 18.22±11.7 months. The mean MELD score was 20.71±5.2. The common liver cirrhosis stages were stage II and stage II was found in 32.2% of each. Hepatocellular carcinoma (HCC) was present in 15.4% of patients. There were 25.5% of patients eligible for liver transplants. CONCLUSION: In our study, we found that significant numbers of patients with CLD were eligible for liver transplantation.

Preparation and Spectrochemical characterization of Ni-doped ZnS nanocomposite for effective removal of emerging contaminants and hydrogen Production: Reaction Kinetics, mechanistic insights.

In this study, we report the successful synthesis of Ni-doped ZnS nanocomposite via a green route using ethanolic crude extract of Avena fatua. The as-synthesized nanocomposite was comprehensively characterized using Dynamic light scattering (DLS), Zeta potential, scanning electron microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and Atomic force microscopy (AFM). These analyses provided detailed insights into the size, morphology, composition, surface properties, and structural characteristics of the nanocomposite. Subsequently, the synthesized nanocomposite was evaluated for their photocatalytic performance against the organic dye Methyl orange. Remarkably, the nanocomposite exhibited rapid and efficient degradation of Methyl orange, achieving 90 % degradation within only 30 min of irradiation under UV light. Moreover, the photocatalyst demonstrated an exceptional hydrogen production rate, reaching 167.73 µmolg-1h-1, which is approximately 4.5 times higher than that of its pristine counterparts. These findings highlight the significant potential of Ni-doped ZnS nanocomposite as highly efficient photocatalysts for wastewater treatment and hydrogen production applications.

Insights into the genetic architecture of Phytophthora capsici root rot resistance in chile pepper (Capsicum spp.) from multi-locus genome-wide association study.

BACKGROUND: Phytophthora root rot, a major constraint in chile pepper production worldwide, is caused by the soil-borne oomycete, Phytophthora capsici. This study aimed to detect significant regions in the Capsicum genome linked to Phytophthora root rot resistance using a panel consisting of 157 Capsicum spp. genotypes. Multi-locus genome wide association study (GWAS) was conducted using single nucleotide polymorphism (SNP) markers derived from genotyping-by-sequencing (GBS). Individual plants were separately inoculated with P. capsici isolates, 'PWB-185', 'PWB-186', and '6347', at the 4-8 leaf stage and were scored for disease symptoms up to 14-days post-inoculation. Disease scores were used to calculate disease parameters including disease severity index percentage, percent of resistant plants, area under disease progress curve, and estimated marginal means for each genotype. RESULTS: Most of the genotypes displayed root rot symptoms, whereas five accessions were completely resistant to all the isolates and displayed no symptoms of infection. A total of 55,117 SNP markers derived from GBS were used to perform multi-locus GWAS which identified 330 significant SNP markers associated with disease resistance. Of these, 56 SNP markers distributed across all the 12 chromosomes were common across the isolates, indicating association with more durable resistance. Candidate genes including nucleotide-binding site leucine-rich repeat (NBS-LRR), systemic acquired resistance (SAR8.2), and receptor-like kinase (RLKs), were identified within 0.5 Mb of the associated markers. CONCLUSIONS: Results will be used to improve resistance to Phytophthora root rot in chile pepper by the development of Kompetitive allele-specific markers (KASP®) for marker validation, genomewide selection, and marker-assisted breeding.

Insight into mechanism of excellent visible-light photocatalytic activity of CuO/MgO/ZnO nanocomposite for advanced solution of environmental remediation.

Environmental remediation has sought several innovative ways for the treatment of wastewater and captivated researchers around the globe towards it. Through this study, we aim to proceed with the efforts to foster sustainable and feasible ways for the treatment of wastewater. In this work, we report the sol-gel synthesis of CuO/MgO/ZnO nanocomposite and carry out their systematic characterization with the help of state-of-the-art analytical techniques, such as FTIR, SEM, TEM, PL, XRD, Raman, and AFM. The SEM along with TEM and AFM provided useful insights into the surface morphology of the synthesized nanocomposite on both 2D and 3D surfaces and concluded the well-dispersed behavior of the nanocomposite. The characteristic functional groups responsible for carrying out the reaction of Cu-O, Mg-O, and Zn-O were identified by FTIR spectroscopy. On the other hand, crystal size, dislocation density, and microstrain of the nanocomposite were calculated by XRD. For optical studies, photoluminescence spectroscopy was performed. Once the characterization of the nanocomposite was done, they were eventually treated against the toxic organic dye, methylene blue. The calculated rate constant values of k for CuO was 2.48 × 10-3 min-1, for CuO/MgO (2.04 × 10-3 min-1), for CuO/ZnO (1.82 × 10-3 min-1) and CuO/MgO/ZnO was found to be 2.00 × 10-3 min-1. It has become increasingly evident that nanotechnology can be used in various facets of modern life, and its implementation in wastewater treatment has recently received much attention.

Left atrial to coronary sinus shunting for treatment of heart failure with mildly reduced or preserved ejection fraction: The ALT FLOW Early Feasibility Study 1-year results.

AIMS: Patients with heart failure and mildly reduced or preserved ejection fraction have limited therapeutic options. The ALT-FLOW Early Feasibility Study evaluated safety, haemodynamics and outcomes for the APTURE transcatheter shunt system, a novel left atrium to coronary sinus shunt in these patients. METHODS AND RESULTS: Safety and shunt implantation success was evaluated for all 116 enrolled patients. An analysis population of implanted patients with a left ventricular ejection fraction (LVEF) >40% (n = 95) was chosen to assess efficacy via paired comparison between baseline and follow-up haemodynamic (3 and 6 months), and echocardiographic, clinical and functional outcomes (6 months and 1 year). Health status and quality of life outcomes were assessed using the Kansas City Cardiomyopathy Questionnaire overall summary score (KCCQ-OSS). The primary safety endpoint, major adverse cardiac, cerebral, and renal events, and reintervention through 30 days, occurred in 3/116 patients (2.6%). All implanted shunts were patent at 1 year. In patients with LVEF >40%, the mean (95% confidence interval) reduction in exercise pulmonary capillary wedge pressure (PCWP) at 20 W was -5.7 (-8.6, -2.9) mmHg at 6 months (p < 0.001). At baseline, 8% had New York Heart Association class I-II status and improved to 68% at 1 year (p < 0.001). KCCQ-OSS at baseline was 39 (35, 43) and improved at 6 months and 1 year by 25 (20-30) and 27 (22-32) points, respectively (both p < 0.0001). No adverse changes in haemodynamic and echocardiographic indices of right heart function were observed at 1 year. Overall, the reduction in PCWP at 20 W and improvement in KCCQ-OSS in multiple subgroups were consistent with those observed for the entire population. CONCLUSIONS: In patients with heart failure and LVEF >40%, the APTURE shunt demonstrated an acceptable safety profile with significant sustained improvements in haemodynamic and patient-centred outcomes, underscoring the need for further evaluation of the APTURE shunt in a randomized trial.

Synthesis of 3,5-disubstituted isoxazoles by domino reductive Nef reaction/cyclization of ß-nitroenones.

ß-Nitroenones can be efficiently converted into 3,5-disubstituted isoxazoles by using tin(II)chloride dihydrate and ethyl acetate as a reducing agent and solvent, respectively. Products are obtained in good yields and several functional groups are tolerated thanks to the mild reaction conditions.

Serological and epidemiological investigation of Mycobacterium avium subspecies paratuberculosis in bovines in Pakistan.

Objective: To investigate the prevalence of paratuberculosis in cattle and buffaloes at twelve public dairy farms in Punjab, Pakistan. Methods: A total of 2181 more than two-year-old animals (1242 cattle and 939 buffaloes) were tested by avian tuberculin, i.e., killed purified protein derivative (PPD) of Mycobacterium avium paratuberculosis and indirect ELISA. Blood and fecal samples were collected from tuberculin positive animals. These samples were further processed by indirect ELISA. The data were analyzed using frequency analysis and logistic analysis procedures. Results: The prevalence of paratuberculosis at public dairy farms was 3.8%, as determined by tuberculin + ELISA test. It varied from 0.71-13.5% with a 100% herd prevalence. Multivariate logistic regression analysis revealed that species, milk production, total animals, total small ruminants, and total buffaloes were significantly associated with the occurrence of paratuberculosis. Odd ratio analysis revealed that with a one-kilogram increase in body weight, there will be a 0.006% increase in disease occurrence. With the increase in one animal in small ruminants and buffaloes, there will be 0.008% and 0.42% greater chances of developing paratuberculosis, respectively. Bivariate logistic regression analysis of cattle and buffaloes revealed that farm number, age, and total number of cattle were significantly associated with the occurrence of paratuberculosis. A one-month increase in lactation length increases the chance of tuberculosis by 0.004%; similarly, a one-liter increase in milk production increases the chance of disease by 10%. With each additional buffalo in the herd, there will be a 0.007% greater chance for the occurrence of paratuberculosis. Conclusion: This study concluded that tuberculin testing can be used in conjunction with ELISA to screen animals for paratuberculosis in countries with scarce resources, such as Pakistan. The efficacy of disease diagnosis can be improved by combining multiple tests.

A scalable blockchain based framework for efficient IoT data management using lightweight consensus.

Recent research has focused on applying blockchain technology to solve security-related problems in Internet of Things (IoT) networks. However, the inherent scalability issues of blockchain technology become apparent in the presence of a vast number of IoT devices and the substantial data generated by these networks. Therefore, in this paper, we use a lightweight consensus algorithm to cater to these problems. We propose a scalable blockchain-based framework for managing IoT data, catering to a large number of devices. This framework utilizes the Delegated Proof of Stake (DPoS) consensus algorithm to ensure enhanced performance and efficiency in resource-constrained IoT networks. DPoS being a lightweight consensus algorithm leverages a selected number of elected delegates to validate and confirm transactions, thus mitigating the performance and efficiency degradation in the blockchain-based IoT networks. In this paper, we implemented an Interplanetary File System (IPFS) for distributed storage, and Docker to evaluate the network performance in terms of throughput, latency, and resource utilization. We divided our analysis into four parts: Latency, throughput, resource utilization, and file upload time and speed in distributed storage evaluation. Our empirical findings demonstrate that our framework exhibits low latency, measuring less than 0.976 ms. The proposed technique outperforms Proof of Stake (PoS), representing a state-of-the-art consensus technique. We also demonstrate that the proposed approach is useful in IoT applications where low latency or resource efficiency is required.

Fabrication and characterization of binary composite MgO/CuO nanostructures for the efficient photocatalytic ability to eliminate organic contaminants: A detailed spectroscopic analysis.

Design and eco-friendly fabrication of affordable and sustainable materials for the treatment of wastewater consisting of dyes, antibiotics, and other harmful substances has always been demanding. Untreated wastewater being released from industries imposes serious threats to our ecosystem, seeking convenient approaches to diminish this alarming issue. Here in this work, we synthesized MgO/CuO nanocomposites from a plant extract of Ammi visnaga L. and then employed these nanocomposites for the treatment of organic dye (methylene blue). We characterized the synthesized nanocomposites by dynamic light scattering (DLS), zeta potential, scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), x-ray diffraction (XRD), and X-ray photoelectron microscopy (XPS). DLS presented information about the explicit size of nanocomposites, while the surface charge was examined by zeta potential. XRD provided detailed information about the crystalline behavior and the information regarding surface morphology and size was extracted by SEM, TEM, and AFM. Moreover, the fabricated nanocomposites were used as a photocatalyst in the treatment of methylene blue. The overall catalytic reaction took an hour to complete, and the value of percentage degradation was 98 %. Substantially, a detailed account of the kinetics, rate of reaction, and mechanism is also fostered in the context. The presented study can assist scientists and researchers around the world to reproduce the results and use them to apply them on a broader scale.

Status and Future Directions for Balloon Pulmonary Angioplasty in Chronic Thromboembolic Pulmonary Disease With and Without Pulmonary Hypertension: A Scientific Statement From the American Heart Association.

Balloon pulmonary angioplasty continues to gain traction as a treatment option for patients with chronic thromboembolic pulmonary disease with and without pulmonary hypertension. Recent European Society of Cardiology guidelines on pulmonary hypertension now give balloon pulmonary angioplasty a Class 1 recommendation for inoperable and residual chronic thromboembolic pulmonary hypertension. Not surprisingly, chronic thromboembolic pulmonary hypertension centers are rapidly initiating balloon pulmonary angioplasty programs. However, we need a comprehensive, expert consensus document outlining critical concepts, including identifying necessary personnel and expertise, criteria for patient selection, and a standardized approach to preprocedural planning and establishing criteria for evaluating procedural efficacy and safety. Given this lack of standards, the balloon pulmonary angioplasty skill set is learned through peer-to-peer contact and training. This document is a state-of-the-art, comprehensive statement from key thought leaders to address this gap in the current clinical practice of balloon pulmonary angioplasty. We summarize the current status of the procedure and provide a consensus opinion on the role of balloon pulmonary angioplasty in the overall care of patients with chronic thromboembolic pulmonary disease with and without pulmonary hypertension. We also identify knowledge gaps, provide guidance for new centers interested in initiating balloon pulmonary angioplasty programs, and highlight future directions and research needs for this emerging therapy.

A Matlab-based application for quantification of yeast cell growth on solid media.

Quantitative assessment of growth and survival is a suitable technique in studying biochemical, genetic and physiological processes in the cells. The budding yeast Saccharomyces cerevisiae is one of the most widely used eukaryotic model organisms for studying cellular mechanisms and processes in evolutionarily distant species, including humans. Yeast growth can be evaluated on both liquid and solid media by measuring cell suspension turbidity and colony forming units, respectively. Several software tools utilizing different parameters have been proposed to quantify yeast growth on solid media. Here, we developed a Matlab-based application which provides a rapid and robust quantitative yeast growth analysis from spot plating assay. Spot plating assay is a typical procedure to evaluate yeast growth in low-throughput laboratory settings, including growth on different nutrient sources or treatment with specific stressors. The app has a one-step installation process, a self-explanatory interface and shorter analysis steps compared with previous established methods, providing a useful tool for both expert and non-expert yeast researchers.

Synthesis of carbon nanotubes-chitosan nanocomposite and immunosensor fabrication for myoglobin detection: An acute myocardial infarction biomarker.

The use of single-walled carbon nanotubes (SWCNTs) in biomedical applications is limited due to their inability to disperse in aqueous solutions. In this study, dispersed -COOH functionalized CNTs with N-succinylated chitosan (CS), greatly increasing the water solubility of CNTs and forming a uniformly dispersed nanocomposite solution of CNTs@CS. Coupling reagent EDC/NHS was used as a linker with the -COOH groups present on the N-succinylated chitosan which significantly improved the affinity of the CNTs for biomolecules. Myoglobin (Mb) is a promising biomarker for the precise assessment of cardiovascular risk, type 2 diabetes, metabolic syndrome, hypertension and several types of cancer. A high level of Mb can be used to diagnose the mentioned pathogenic diseases. The CNTs@CS-FET demonstrates superior sensing performance for Mb antigen fortified in buffer, with a wide linear range of 1 to 4000 ng/mL. The detection limit of the developed Mb immunosensor was estimated to be 4.2 ng/mL. The novel CNTs@CS-FET immunosensor demonstrates remarkable capability in detecting Mb without being affected by interferences from nonspecific antigens. Mb spiked serum showed a recovery rate of 100.262 to 118.55 % indicating great promise for Mb detection in clinical samples. The experimental results confirmed that the CNTs@CS-FET immunosensor had excellent selectivity, reproducibility and storage stability.