RESUMEN
Background With three-dimensional (3D) bioprinting emerging as the ultimate pinnacle of personalised treatment for achieving predictable regenerative outcomes, the search for tissue-specific bioinks is on. Decellularised extracellular matrix (DECM), which provides the inherent biomimetic cues, has gained considerable attention. The objective of the present study was to compare the efficacy of three different demineralisation protocols to obtain DECM for bone tissue engineering applications. Methodology Goat femurs were treated using three demineralisation protocols to obtain DECM. Group A was treated with demineralisation solution at 40 rpm for 14 days, Group B with freeze-thaw cycles and 0.05M hydrochloric acid (HCl) and 2.4 mM ethylenediamine tetra-acetic acid (EDTA) at 40 rpm for 60 days, and Group C with 0.1M HCl at 40 rpm for three days. After washing, neutralization, 0.05% trypsin-EDTA treatment for 24 hours, and lyophilisation, DECM was obtained. Assessments included scanning electron microscope (SEM) analysis, energy dispersive X-ray (EDX) analysis, hematoxylin and eosin (H&E) staining, and biocompatibility analysis. Results On comparative analysis, the protocol followed by Group C revealed good surface properties with patent and well interconnected pores with an average pore size of 218.87µm. Group C also revealed carbon and oxygen as predominant components with trace amounts of calcium, proving adequate demineralisation. Group C further revealed optimal demineralisation and decellularisation under histological analysis while maintaining biocompatibility. DECM obtained in Group C should be further processed for bioprinting applications. Conclusion The three protocols explored in this study hold potential, with Group C's protocol demonstrating the most promise for DECM-based bioink applications. Further research is needed to evaluate the suitability of the obtained DECM for preparing tissue-specific bioinks for 3D bioprinting.
RESUMEN
INTRODUCTION: The effectiveness of intracanal medicaments (ICMs) in root canal therapy is critical for successful dental treatments, yet their cytotoxic effects pose significant challenges. This research uses zebrafish embryos and dental pulp stem cells (DPSCs) to identify the optimal concentration that balances antibacterial efficacy with minimal toxicity. AIM: This study aims to address the need for effective ICMs in dentistry by formulating and assessing the embryotoxicity and cytocompatibility of a novel carrageenan-based modified triple antibiotic paste (MTAP) hydrogel at different concentrations (1, 5, and 10 mg/mL) using a zebrafish model and cell culture assay. MATERIALS AND METHODS: The hydrogel was formulated by combining antibiotic solutions (ciprofloxacin, metronidazole, and amoxicillin) with carrageenan and xanthan gum. Zebrafish embryos were exposed to varying concentrations of MTAP hydrogel, chlorhexidine (CHX), calcium hydroxide (CaOH2), and plain carrageenan to assess developmental toxicity, survival rate, heart rate, hatching rate, and macrophage migration. The cytotoxicity against DPSCs was examined within a timeframe of 6, 24, and 72 hours with the use of the 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyltetrazolium bromide (MTT) assay. RESULTS: The analysis revealed developmental toxicity with malformations observed at higher concentrations of MTAP hydrogel, CaOH2, and CHX medicaments, indicating potential toxicity. Significant impacts on survival, heart rate, and hatching rate were noted in the CaOH2 and CHX groups, as well as at higher MTAP hydrogel concentrations, emphasizing the importance of dosage considerations. The neutral red assay confirmed toxicity, with macrophage migration observed in CaOH2, CHX, and higher MTAP hydrogel concentrations. Lower concentrations, particularly at 1 mg/mL, showed no adverse effects on zebrafish embryos and larvae. These findings align with cell viability investigations, which demonstrated that higher antibiotic concentrations resulted in decreased cell proliferation and viability over time. Conversely, at a lower concentration of 1 mg/mL, cell proliferation notably increased after 72 hours. Plain MTAP and CHX exhibited the highest toxicity levels in the MTT assay. CONCLUSION: The study concludes that while higher concentrations of MTAP hydrogel exhibit toxic effects, the hydrogel at 1 mg/mL demonstrates no adverse impact on zebrafish embryos, larvae, and DPSCs. These findings underscore the necessity of optimizing ICM concentrations to balance antibacterial efficacy and minimal cytotoxicity.
RESUMEN
Aim The aim of this study was to assess the physicochemical characterization and mineralization of nanofibrous scaffold incorporated with nanohydroxyapatite (nHA) and aspartic acid (Asp) for dental mineralization. Methodology Three nanofibrous scaffolds were prepared, namely polycaprolactone (PCL), PCL with nHA, and PCL with nHA and Asp. Each scaffold was prepared separately by electrospinning. The physicochemical characterization of the surface of the nanofibrous scaffold was imaged using a scanning electron microscope (SEM), energy dispersive X-ray Analysis (EDX), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR). In vitro mineralization studies were performed by immersing the sample in simulated body fluid (SBF) for 7, 14, and 21 days. The surface of the samples was observed under SEM with EDX. Results SEM analysis of PCL/nHA/Asp revealed that the nanoï¬bers were bead-free, smooth, randomly oriented, and loaded with Asp. The EDX spectra of PCL/nHA/Asp composite nanofibrous scaffold revealed broad peaks and corresponded to the amorphous form, while the sharp peaks corresponded to the specific crystalline structure of nHA. FTIR analysis showed specific functional groups corresponding to PCL, nHA, and Asp. The scaï¬olds incorporated with Asp exhibited higher mineralization potential with an apatite-like crystal formation, which increased with an increase in the duration of immersion in SBF. Conclusion Physiochemical characterization demonstrated the incorporation of PCL/nHA/Asp in the electrospun nanofibrous scaffold. The mineralization analysis revealed that the presence of Asp enhanced the mineralization when compared with the PCL and PCL/nHA. PCL/nHA/Asp incorporated in scaffold can be a promising material for dental mineralization.
RESUMEN
Artemisia abyssinica is a widely cultivated hedge plant in Ethiopia. Traditionally, they have been used to treat a variety of health conditions, including intestinal problems, infectious diseases, tonsillitis, and leishmaniasis. Silica gel chromatographic separation of the methanol and ethyl acetate extracts of the leaves, roots, and stem barks of A. abyssinica led to the isolation of 12 compounds, labeled as 1-12. Among these, compounds 1, 3, 4, 5, and 7-11 are reported as new to the genus Artemisia. The extracts and isolated compounds from A. abyssinica were evaluated for their in vitro antibacterial activity against four bacterial strains: Streptococcus pyogenes, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli, using the disc diffusion assay. All of the extracts displayed weak antibacterial activity, with inhibition zone diameters (IZDs) ranging from 6.10 ± 0.3 to 9.30 ± 0.20 mm. The isolated compounds, on the other hand, exhibited weak to moderate antibacterial activity, with IZDs ranging from 6.00 ± 0.300 to 13.50 ± 0.50 mm. The most potent antibacterial activity was observed for compound 6, which showed an IZD of 13.30 ± 0.50 mm against E. coli and 13.50 ± 0.50 mm against P. aeruginosa. This activity was comparable to that of the positive control ceftriaxone, which had IZDs of 14.1 ± 0.3 and 13.8 ± 0.5 mm against E. coli and P. aeruginosa, respectively. The in silico molecular docking analysis against DNA gyrase B revealed that compound 5 showed a higher binding affinity (-6.9 kcal/mol), followed by compound 10 (-6.7 kcal/mol) and compound 12 (-6.3 kcal/mol), whereas ciprofloxacin showed -7.3 kcal/mol. The binding affinities of compounds 5, 11, 10, and 9 were found to be -5.0, -4.3, -4.2, and -4.0 kcal/mol against S. aureus Pyruvate kinase, respectively, whereas ciprofloxacin showed a binding affinity of -4.9 kcal/mol, suggesting that compound 5 had a better binding affinity compared with ciprofloxacin. The effect of extracts of A. abyssinica was evaluated for cytotoxic activity against the breast cancer cell line (MCF-7) by the MTT assay. The extracts induced a decrease in cell viability and exerted a cytotoxic effect at a concentration of 20 µg/mL. The highest percent cell viability was observed for the methanol extract of the stem (92.9%), whereas the least was observed for the methanol extract of the root (34.5%). The result of the latter was significant compared with the positive control. The binding affinities of the isolated compounds were also assessed against human topoisomerase inhibitors IIß. Results showed that compound 5 showed a binding affinity of -6.0 kcal/mol, followed by 11 (-5.4 kcal/mol), 10 (-5.0 kcal/mol), and 11 (-4.9 kcal/mol). Similar to ciprofloxacin, compounds 4, 5, 6, 9, 10, and 12 comply with Lipinski's rule of five. Overall, the comprehensive investigation of the chemical constituents and their biological activities reinforces the traditional medicinal applications of A. abyssinica and warrants further exploration of this plant as a source of novel therapeutic agents.
RESUMEN
The plant Hydnora johannis has been utilized in folk medicine. Analyzing phytochemical composition of dichloromethane/methanol (1 : 1) root part of Hydnora johannis gave oleic acid (1), caffeic acid-2-hydroxynonylester (2), catechin (3), and a pregnane derivative (4). NMR spectroscopy was used to characterize compounds 1-3, while compound 4 was identified through GC-MS analysis and literature comparison. The cytotoxicity of extracts from roots of H. johannis was conducted against MCF-7 cell lines (human breast cancer) by MTT assay. According to the cytotoxicity study, n-hexane extract exhibited a high level of toxicity with 28.9 ± 5.6% cell viability. Antibacterial activity was tested against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Streptococcus pyogen. The highest bacterial growth mean inhibition zone was measured for catechin (3) (13.72 ± 0.05 mm)) against P. aeruginosa at 0.25 mg/mL and acceptable related to standard. Antioxidant activity was studied by the DPPH assay. Based on the data from the antioxidant study, DCM/MeOH extract (70.32%) and catechin (3) showed good antioxidant activity (65.61%) (IC50 0.25 µg/mL) relative to that of the positive control (78.21%, IC50 0.014 µg/mL) at 12.5 µg/mL. In each docking pose, catechin (3) scored higher binding affinity of -7.9, -7.2, and -6.4 kcal/mol towards PqsA, DNA gyraseB, and S. aureus PK, respectively, compared to amoxicillin (-8.1, -6.1, and -6.4 kcal/mol). All five Lipinski rules were obeyed by compounds 1-3, which showed an acceptable drug resemblance. The lipophilicity was computed as less than five (1.47-4.01) indicating a lipophilic property. Catechin (3) obeys Veber's rule implying its good oral bioavailability. Binding affinity scores of catechin (3)-protein interactions are in line with those from in vitro tests, indicating its potential antibacterial effect. The obtained cytotoxicity and antibacterial activity results support the utilization of H. johannis in folk medicine.
RESUMEN
Aim: To evaluate the remineralization potential of varying concentrations of two plant-based extracts of Cocos nucifera on white spot lesions using SEM and EDAX in vitro testing methods. Materials and Methods: The pulp was freshly obtained from coconut and divided into two. Then, coconut milk was obtained by blending, while the next portion was freeze-dried and lyophilized. Third molar teeth were processed into tooth slabs (N = 40) and split equally into five groups by block randomization. After demineralization, one tooth slab was taken from each, and SEM analysis was done. Remineralization was then performed among the various groups that included Group 1, which acted as a control and consisted of the remineralization solution. Groups 2 and 3 comprised 1:1 and 2:1 concentrations of the coconut milk, whereas Groups 4 and 5 consisted of 1:1 and 2:1 concentrations of the lyophilized extract. SEM and EDAX testing were done post-remineralization. Ca and phosphate values were tabulated, and statistical significance was determined for the obtained values using ANOVA. Results: Among the control and treatment groups, surface remineralization was better observed in 1:1 coconut milk and 2:1 coconut milk than in the 2:1 lyophilized coconut, control, and 1:1 lyophilized coconut. Between the control and treatment groups, Ca and phosphate percentages (P < 0.001) showed statistical differences. The lowest value of 2.3% was noted in the 2:1 lyophilized coconut group. Conclusion: Coconut extracts exhibit remineralization potential on the artificial carious lesion. Coconut milk exhibited significant improvement in the surface properties than lyophilized coconut.
RESUMEN
Three-dimensional (3D) bioprinting has emerged as a revolutionary additive manufacturing technology that can potentially enable life-changing medical treatments in regenerative medicine. It applies the principles of tissue engineering for the printing of tissues and organs in a layer-by-layer manner. This review focuses on the various 3D bioprinting technologies currently available, the different biomaterials, cells, and growth factors that can be utilized to develop tissue-specific bioinks, the different venues for applying these technologies, and the challenges this technology faces.
RESUMEN
Background Pulp necrosis in incomplete root formation halts dentine development, resulting in larger canals with fragile walls and an open apex, complicating canal instrumentation and apical stop formation. Bioactive endodontic cements such as mineral trioxide aggregate (MTA) are crucial for creating artificial apical barriers or inducing apical foramen closure, but challenges remain regarding their antimicrobial efficacy and cytotoxicity. Modifications to MTA formulations aim to address these concerns. Methods This in vivo animal study involved 80 Wistar albino rats, with incomplete root formation induced by pulp exposure. Rats were divided into four groups receiving different MTA formulations for apexification: conventional MTA, modified MTA, and MTA enhanced with metronidazole or doxycycline. Histopathological evaluations were conducted at seven and 28 days post-treatment to assess calcific barrier formation, inflammatory reactions, and antimicrobial efficacy. Results By day 7, modified MTA formulations exhibited enhanced antibacterial activity compared to conventional MTA (p = 0.000), with fewer inflammatory reactions and microorganisms. By day 28, modified formulations showed superior calcific barrier formation, particularly in the metronidazole- and doxycycline-enhanced groups compared to conventional MTA (p = 0.000). These outcomes suggest that modifications to MTA formulations improve antimicrobial efficacy and calcific barrier formation in vivo. Conclusion Novel modified MTA formulations, particularly those enhanced with metronidazole or doxycycline, exhibit superior antibacterial efficacy and calcific barrier formation compared to conventional MTA. Further long-term studies are warranted to validate these findings for potential clinical translation.
RESUMEN
BACKGROUND: Photodynamic therapy can be used to treat a variety of lesions noninvasively, including oral cancer. High-power laser therapy has also been used to treat oral squamous cell carcinomas. The two main components of photodynamic treatment are the photosensitizer and the light source. Herbal formulations of photosensitizers are used to mask the disadvantages of other photosensitizers. METHODOLOGY: A methanol-diluted 25 grams of Punica granatum was used to create an anthocyanin extract using the flash evaporation method. Dimethyl sulfoxide (DMSO) was used as the first dilution agent for curcumin; later further dilution was done with distilled water. Following that, MCF-7 cells (a cancer cell line) were cultured with the produced samples, and the mono-tetrazolium salt (MTT) assay was used to determine the vitality of the cells. RESULTS: Cell reduction was significantly evident in all three groups, but the most significant cell death was found in the anthocyanin-curcumin group, at 29%. CONCLUSION: The combination of anthocyanin-curcumin has one of the photophysical properties (dark cytotoxicity) and hence can aid as a photosensitizer.
RESUMEN
BACKGROUND: Type 2 diabetes mellitus (T2DM) is a global health concern associated with systemic as well as oral complications. The preventive antioxidants found in saliva naturally reduce the damaging effects of reactive oxygen molecules. Any disruption to the regular functioning of these antioxidants may lead to oxidative stress, which could boost an individual's vulnerability to oral diseases. Diabetes patients are vulnerable to various dental complications, such as oral mucosal disorders, dental caries, dry mouth, and periodontal disease. AIM: This study aimed to assess the salivary butylated hydroxytoluene (BHT) and ascorbic acid (AA) levels in patients with controlled and uncontrolled type 2 diabetes mellitus. MATERIALS AND METHODS: The present study included samples from patients aged 45-65. Group I consisted of 20 controlled diabetic patients, and Group II consisted of 20 uncontrolled diabetic patients. Unstimulated whole saliva samples were collected from both groups, and laboratory analysis was done. Salivary BHT and AA levels were quantified using enzyme-linked immunosorbent assay (ELISA) and spectrophotometric assay. RESULTS: Salivary butylated hydroxytoluene levels were found to be higher in the uncontrolled diabetic group than in the controlled diabetic group, and salivary AA levels were found to be higher in the controlled diabetic group than in the uncontrolled diabetic group. The mean ± standard deviation (SD) values of butylated hydroxytoluene among controlled and uncontrolled diabetic patients were 2.98 ± 0.12 and 2.99 ± 0.11 absorbance units, respectively. The mean ± SD value of AA in the controlled group was found to be 2.99 ± 0.15 absorbance units, and the mean ± SD value of AA in the uncontrolled group was 2.64 ± 0.96 absorbance units. However, it has been found that there is no statistically significant difference between salivary BHT and AA levels among controlled and uncontrolled diabetics, with p-values of 0.867 and 0.419, respectively. CONCLUSION: Values of salivary biochemical markers were distinctly different between controlled and uncontrolled diabetic groups. However, to establish a definite role of salivary BHT and AA levels as biomarkers in managing and monitoring type 2 diabetes, future studies are required, even though the trends exhibit possible alterations in biomarkers.
RESUMEN
PURPOSE: The study aimed to analyze whether adding Cissus quadrangularis (CQ) extract and the extracellular matrix of ovine tendon (TENDON) increases the regenerative potential of mesenchymal stem cells produced in hyaluronic acid (HA) scaffolds for tenogenesis. MATERIALS AND METHODS: Fifty grams of powdered CQ was mixed with 250 mL of ethanol to prepare the extract. Two grams of hyaluronic acid powder was added to 100 mL of distilled water to make the HA solution. The ovine tendon was decellularized using a mixture of 10% phosphate-buffered saline (PBS), sodium dodecyl sulfate (SDS), and Triton-X. The hydrogel samples were prepared by mixing the extracellular matrix of tendon, HA, and CQ, after which they were divided into study groups such as HA, HA + CQ, HA + TENDON, and HA + CQ + TENDON. Scanning electron microscopy (SEM) analysis, swelling analysis, differentiation analysis, compression test, compatibility assay, and tenogenesis assay were later conducted. RESULTS: The morphology of the samples was analyzed using SEM. Low levels of swelling of the hydrogels were observed. Cells were found to be viable and showed good differentiation and tenogenesis. Optimal compression levels were observed, and the properties of the prepared hydrogels were satisfactory. CONCLUSION: The results suggest that the addition of CQ considerably increases the tenogenic potential of the extracellular matrix/HA scaffold. Hence, it can be used as a regenerative material for periodontal tissue regeneration.
RESUMEN
Background The challenges associated with incorporating antimicrobial agents, such as the potential diminishment of the cement's physical properties, highlight the need for comprehensive evaluations. Balancing antimicrobial efficacy with the maintenance of structural integrity is a crucial aspect of material development. The acknowledgment of cytotoxic properties associated with tricalcium aluminate, a major constituent in conventional mineral trioxide aggregate (MTA), is critical in terms of long-term evaluation of treatment procedures. The primary focus of the push-out test is to evaluate the resistance of the tested material to dislodgement. Greater push-out strength implies stronger adhesion between the tested material and the tooth surface. Aim This study aims to evaluate the push-out bond strength of two antibacterial-enhanced MTAs with conventional MTA and Biodentine. Material and methods A total of five materials were tested: a) modified MTA, b) doxycycline-enhanced MTA, c) metronidazole-enhanced MTA, d) conventional MTA, and e) Biodentine. All the materials were mixed based on a predetermined powder:liquid ratio and then carried using a plastic instrument to the desired experimental design. Single-rooted permanent teeth, preferably incisors, were used in the present study. Teeth were embedded vertically in a rubber mold, and sectioning of the tooth was performed. A single operator instrumented the canal space in each slice using Gates-Glidden burs, and the mixed cements were placed in the respective groups and stored for 72 hours. A push-out test was carried out using a universal testing machine. Following the bond failure, the slices were examined under a stereomicroscope to determine the nature of the bond failure. The collected data was subjected to a one-way analysis of variance test, post hoc test, and chi-square test for statistical analysis. Results The mean push-out bond strength was found to be the highest for Biodentine (43.25 ± 0.62 megapascals (MPa)), followed by doxycycline- and metronidazole-enhanced MTAs (39.54 ± 0.65 MPa and 39.29 ± 0.16 MPa, respectively), modified MTA formulation (37.75 ± 0.73 MPa), and the lowest for conventional MTA (25.93 ± 0.7 MPa). Conventional MTA samples had an adhesive failure (89.4%), while Biodentine samples had a cohesive failure (80.3%). Mixed failures were noticed with the samples containing modified MTA formulation (71.3%), doxycycline-enhanced MTA (76.6%), and metronidazole-enhanced MTA (78.0%). Conclusion Despite not surpassing Biodentine in bond strength, antibacterial-enhanced MTAs are considered potential alternatives to conventional MTA in day-to-day clinical practice.
RESUMEN
OBJECTIVE: Triple antibiotic paste (TAP) is known to have an essential role in the success of endodontic treatment by eliminating pathogens from the root canal system. Unfortunately, it causes discolouration and cytotoxicity at high concentrations. The objective of this research was to assess and compare the antimicrobial effectiveness of various concentrations (1 mg, 5 mg, 10 mg) of TAP, TAP hydrogel (TAPH), M-TAP, and M-TAP hydrogel (MTAPH) against Enterococcus faecalis. METHODS: The agar well diffusion method was used to assess the antibiotic sensitivity of the following intracanal medicaments: TAP (ciprofloxacin, metronidazole, and minocycline) mixed in a ratio of 1: 1: 1; TAPH, M-TAP (ciprofloxacin, metronidazole, and amoxicillin), M-TAPH and plain hydrogel. Each tested medicament was individually evaluated for its antimicrobial activity against Enterococcus faecalis. Structural and topographical characterisation were analysed using a Scanning Electron Microscope (SEM) and interpreted using ImageJ software. A microdilution broth test was performed to examine the minimum inhibitory concentration and minimum bactericidal concentration (MBC) of M-TAP and TAP. RESULTS: Except for the plain hydrogel, M-TAP and hydrogel and TAP and hydrogel showed significantly varied inhibitory zones at different concentrations. M-TAPH showed the highest mean zone of inhibition of 21.6, 33.33 and 38.0 mm at a concentration of 1, 5, and 10 mg/mL when compared to TAPH, which showed a mean zone of inhibition of 3.3 mm,12.3 mm, 21.3 mm at the respective concentrations. The MIC study shows that more than 75% of Enterococcus faecalis growth was inhibited by M-TAP at a concentration of 5 µg/mL, whereas TAP showed inhibition at a concentration of 35 µg/mL. MBC results indicate that almost 99.9% of the bacterial population was killed at a concentration of 100 µg/mL (10-1) for TAP and 10 µg/mL (10-2) for M-TAP. CONCLUSION: The antibacterial efficacy of M-TAP was significantly higher than TAP. Application of M-TAP at lower doses is advised to overcome the disadvantages seen with TAP.
Asunto(s)
Antiinfecciosos , Hidrazonas , Metronidazol , Tiofenos , Metronidazol/farmacología , Enterococcus faecalis , Hidrogeles/farmacología , Antibacterianos/farmacología , Ciprofloxacina , Bacitracina , Polimixina B , FramicetinaRESUMEN
BACKGROUND: In order to achieve uneventful and rapid healing of the tissues, a suture material should be biocompatible, easy to handle, sterile, and have good and uniform tensile strength. Hence, in the present study, characterization of the suture materials was done through a novel green chemistry approach using Punica granatum seed extract. MATERIALS AND METHODS: Ethanolic extract of P. granatum seed was prepared by dissolving 25 g of P. granatum seed powder with 100 mL of ethanol. The obtained extract was coated in silk and Vicryl suture material and was tested for its surface morphology (SEM), tensile strength, anti-microbial activity, biocompatibility, and wound healing potential. RESULTS: Silk and Vicryl sutures coated with P. granatum seed extract showed the uniform coating and deposition of extract with sustaining integrity. Vicryl suture coated with the extract had good tensile strength and antimicrobial activity. The in vitro scratch assay and biocompatibility test showed that the P. granatum seed extract had excellent wound healing potential and can be used without any effect on the viability of the normal cells. CONCLUSION: Within the limitations of the study it can be concluded that P. granatum seed extract coated Vicryl sutures had good tensile strength and anti-microbial activity. P. granatum seed extract also showed excellent biocompatibility and wound healing potential.
Asunto(s)
Granada (Fruta) , Humanos , Proyectos Piloto , Poliglactina 910 , Suturas , Seda , Etanol , Extractos Vegetales/farmacologíaRESUMEN
Background: Brassica oleracea var. botrytis is an annual or biennial herbaceous vegetable plant in the Brassicaceae family notable for its edible blossom head. A lot of effort has gone into finding defense-associated proteins in order to better understand how cauliflower and pathogens interact. Endophytes are organisms that live within the host plant and reproduce. Endophytes are bacteria and fungi that reside in plant tissues and can either help or harm the plant. Several species have aided molecular biologists and plant biotechnologists in various ways. Water is essential for a healthy cauliflower bloom. When the weather is hot, this plant dries up, and nitrogen scarcity can be detrimental to cauliflower growth. Objective: The study sought to discern plant growth promoting (PGP) compounds that can amplify drought resilience and boost productivity in cauliflower. Methods: Investigations were centered on endophytes, microorganisms existing within plant tissues. The dual role of beneficial and detrimental Agrobacterium was scrutinized, particularly emphasizing the ethylene precursor compound, 1-amino-cyclopropane-1-carboxylic acid (ACCA). Results: ACCA possessed salient PGP traits, particularly demonstrating a pronounced enhancement of drought resistance in cauliflower plants. Specifically, during the pivotal marketable curd maturity phase, which necessitates defense against various threats, ACCA showcased a binding energy of -8.74 kcal/mol. Conclusion: ACCA holds a significant promise in agricultural productivity, with its potential to boost drought resistance and cauliflower yield. This could be particularly impactful for regions grappling with high temperatures and possible nitrogen shortages. Future research should explore ACCA's performance under diverse environmental settings and its applicability in other crops.
RESUMEN
Background Ocimum sanctum (OS) is a medicinal plant with antioxidant, anti-cancer, anti-diabetic, antimicrobial, and anti-inflammatory activities. Extracellular matrix (ECM) maintains the structural stability of tissues. Hyaluronic acid (HA), which is used in hydrogel fabrication and osteochondral regeneration, increases cell viability and the expression of marker genes. Periodontal ligament stem cells (PDLSC), which are a type of mesenchymal stem cells (MSC), have self-renewing capacity and they prevent teratoma formation and promote tendon (TEN) regeneration. The aim of this study is to incorporate the phytochemical effects of Ocimum sanctum into hyaluronic acid hydrogel scaffolds made with the MSCs in tendon ECM for increased tissue regeneration. Materials & methods Ocimum sanctum extract and methacrylated hyaluronic acid (HA-MA) were prepared. An ovine tendon sample was decellularised to obtain the ECM. The study groups of HA, TEN, HA_OS, HA_TEN, and HA_OS_TEN were prepared. The presence of tendon cells was confirmed by picrosirius red staining and the hydrogel scaffolds were analysed using scanning electron microscopy (SEM), swelling, differentiation, compression, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) compatibility analyses. Results The morphology of the samples was analysed by SEM analysis. The HA_OS_TEN sample showed the highest rate of tenogenesis, lowest swelling, high cell viability and differentiation, and optimal compression rates. Conclusion This study showed that hyaluronic acid combined with Ocimum sanctum and tendon ECM is a very good conjugation for the preparation of hydrogel scaffolds for tendon tissue regeneration using MSCs.
RESUMEN
Salinity stress adversely affects agricultural productivity by disrupting water uptake, causing nutrient imbalances, and leading to ion toxicity. Excessive salts in the soil hinder crops root growth and damage cellular functions, reducing photosynthetic capacity and inducing oxidative stress. Stomatal closure further limits carbon dioxide uptake that negatively impact plant growth. To ensure sustainable agriculture in salt-affected regions, it is essential to implement strategies like using biofertilizers (e.g. arbuscular mycorrhizae fungi = AMF) and activated carbon biochar. Both amendments can potentially mitigate the salinity stress by regulating antioxidants, gas exchange attributes and chlorophyll contents. The current study aims to explore the effect of EDTA-chelated biochar (ECB) with and without AMF on maize growth under salinity stress. Five levels of ECB (0, 0.2, 0.4, 0.6 and 0.8%) were applied, with and without AMF. Results showed that 0.8ECB + AMF caused significant enhancement in shoot length (~ 22%), shoot fresh weight (~ 15%), shoot dry weight (~ 51%), root length (~ 46%), root fresh weight (~ 26%), root dry weight (~ 27%) over the control (NoAMF + 0ECB). A significant enhancement in chlorophyll a, chlorophyll b and total chlorophyll content, photosynthetic rate, transpiration rate and stomatal conductance was also observed in the condition 0.8ECB + AMF relative to control (NoAMF + 0ECB), further supporting the efficacy of such a combined treatment. Our results suggest that adding 0.8% ECB in soil with AMF inoculation on maize seeds can enhance maize production in saline soils, possibly via improvement in antioxidant activity, chlorophyll contents, gas exchange and morphological attributes.
Asunto(s)
Micorrizas , Antioxidantes , Zea mays , Carbón Orgánico , Ácido Edético , Clorofila A , Estrés Salino , Clorofila , SueloRESUMEN
Cucumis dipsaceus (Cucurbitaceae) is a plant traditionally used against diarrhea, teeth-ach, wounds, stomach ache, meningitis, and cancer. The extracts of C. dipsaceus after silica gel column chromatography gave nine compounds identified using spectroscopic methods such as hexacosane (1), octadecane (2), 17-(-5-ethyl-2,6-dihydroxy-6-methylhept-3-en-2-yl)-9-(hydroxymethyl)-13-methylcyclopenta[α]phenanthren-3-ol (3), erythrodiol (4), (9,12)-propyl icosa-9,12-dienoate (5), α-spinasterol (6), 16-dehydroxycucurbitacin (7), cucurbitacin D (8), and 23,24-dihydroisocucurbitacin D (9). Compounds 3 and 4 are new to the genus Cucumis. α-Spinasterol showed better inhibition zone diameter = 13.67 ± 0.57, 15.00 ± 0.10, and 13.33 ± 0.57 mm against Escherichia coli, Pseudomonas aeruginosa, and Streptococcus pyogenes compared with the other tested samples. α-Spinasterol (-8.0 kcal/mol) and 3 (-7.6 kcal/mol) displayed high binding affinity against DNA Gyrase compared to ciprofloxacin (-7.3 kcal/mol). α-Spinasterol and 16-dehydroxycucurbitacin showed better binding affinity against protein kinase. The cytotoxicity results revealed that the EtOAc extract showed the highest potency with IC50 = 16.05 µg/mL. 16-Dehydroxycucurbitacin showed a higher binding affinity (-7.7 kcal/mol) against human topoisomerase IIß than etoposide. The cytotoxicity and antibacterial activities and in silico molecular docking analysis displayed by the constituents corroborate the traditional use of the plant against bacteria and cancer.
RESUMEN
Neuronal ceroid-lipofuscinosis (NCLs) are a group of severe neurodegenerative conditions, most likely present in infantile, late infantile, juvenile, and adult-onset forms. Their phenotypic characteristics comprise eyesight damage, reduced motor activity and cognitive function, and sometimes tend to die in the initial stage. In recent studies, NCLs have been categorized into at least 14 genetic collections (CLN1-14). CLN2 gene encodes Tripeptidyl peptidase 1 (TPP1), which affects late infantile-onset form. In this study, we retrieved a mutational dataset screening for TPP1 protein from various databases (ClinVar, UniProt, HGMD). Fifty-six missense mutants were enumerated with computational methods to perceive the significant mutants (G475R and G501C) and correlated with clinical and literature data. A structure-based screening method was initiated to understand protein-ligand interaction and dynamic simulation. The docking procedure was performed for the native (3EDY) and mutant (G473R and G501C) structures with Gemfibrozil (gem), which lowers the lipid level, decreases the triglycerides amount in the blood circulation, and controls hyperlipidemia. The Native had an interaction score of -5.57 kcal/mol, and the mutants had respective average binding scores of -6.24 (G473R) and - 5.17 (G501C) kcal/mol. Finally, molecular dynamics simulation showed that G473R and G501C mutants had better flexible and stable orientation in all trajectory analyses. Therefore, this work gives an extended understanding of both functional and structural levels of influence for the mutant form that leads to NCL disorder.
Asunto(s)
Aminopeptidasas , Dipeptidil-Peptidasas y Tripeptidil-Peptidasas , Mutación Missense , Lipofuscinosis Ceroideas Neuronales , Serina Proteasas , Tripeptidil Peptidasa 1 , Lipofuscinosis Ceroideas Neuronales/genética , Dipeptidil-Peptidasas y Tripeptidil-Peptidasas/genética , Serina Proteasas/genética , Humanos , Aminopeptidasas/genética , Simulación de Dinámica Molecular , Simulación del Acoplamiento MolecularRESUMEN
It is of interest to formulate a hydrogel consisting of Ocimum sanctum Linn, sorbitol, and carboxymethyl cellulose and to evaluate the physical properties of the hydrogel. The hydrogel was prepared by dissolving Ocimum sanctum Linn extract into the mixture containing sorbitol and carboxymethyl cellulose. The formulation was further evaluated for its swelling index, contact angle, in -vitro release properties, and surface analysis using atomic force microscopy. The swelling index showed a significant increase in weight from 1st hr to the 84th hour which is 11.1% and 15.8% respectively. The contact angle test showed a value of 72.81° and 75.99° respectively. In vitro drug release showed a burst release till the 6th day followed by a sustained release till the 20th day. Atomic force microscopy revealed smooth and consistent surface topography with a mean size of 51µm in diameter which depicts that the particles are well dispersed throughout the hydrogel matrix. Data show that hydrogel containing Ocimum sanctum Linn extract, sorbitol, and carboxymethyl cellulose could be an efficient economic primeval substitute that is non-toxic, natural, and structured for clinical application.