RESUMEN
The ideal mechanical properties and behaviors of materials without the influence of defects are of great fundamental and engineering significance but considered inaccessible. Here, we use single-atom-thin isotopically pure hexagonal boron nitride (hBN) to demonstrate that two-dimensional (2D) materials offer us close-to ideal experimental platforms to study intrinsic mechanical phenomena. The highly delicate isotope effect on the mechanical properties of monolayer hBN is directly measured by indentation: lighter 10B gives rise to higher elasticity and strength than heavier 11B. This anomalous isotope effect establishes that the intrinsic mechanical properties without the effect of defects could be measured, and the so-called ultrafine and normally neglected isotopic perturbation in nuclear charge distribution sometimes plays a more critical role than the isotopic mass effect in the mechanical and other physical properties of materials.
RESUMEN
Magnetism in two-dimensional (2D) van der Waals (vdW) materials has recently emerged as one of the most promising areas in condensed matter research, with many exciting emerging properties and significant potential for applications ranging from topological magnonics to low-power spintronics, quantum computing, and optical communications. In the brief time after their discovery, 2D magnets have blossomed into a rich area for investigation, where fundamental concepts in magnetism are challenged by the behavior of spins that can develop at the single layer limit. However, much effort is still needed in multiple fronts before 2D magnets can be routinely used for practical implementations. In this comprehensive review, prominent authors with expertise in complementary fields of 2D magnetism (i.e., synthesis, device engineering, magneto-optics, imaging, transport, mechanics, spin excitations, and theory and simulations) have joined together to provide a genome of current knowledge and a guideline for future developments in 2D magnetic materials research.
Asunto(s)
Metodologías Computacionales , Teoría Cuántica , Fenómenos MagnéticosRESUMEN
The mechanical properties of magnetic materials are instrumental for the development of magnetoelastic theories and the optimization of strain-modulated magnetic devices. In particular, two-dimensional (2D) magnets hold promise to enlarge these concepts into the realm of low-dimensional physics and ultrathin devices. However, no experimental study on the intrinsic mechanical properties of the archetypal 2D magnet family of the chromium trihalides has thus far been performed. Here, we report the room temperature layer-dependent mechanical properties of atomically thin CrCl3 and CrI3, finding that the bilayers have Young's moduli of 62.1 and 43.4 GPa, highest sustained strains of 6.49% and 6.09% and breaking strengths of 3.6 and 2.2 GPa, respectively. This portrays the outstanding plasticity of these materials that is qualitatively demonstrated in the bulk crystals. The current study will contribute to the applications of the 2D magnets in magnetostrictive and flexible devices.
RESUMEN
Two-dimensional (2D) tungsten disulfide (WS2), tungsten diselenide (WSe2), and tungsten ditelluride (WTe2) draw increasing attention due to their attractive properties deriving from the heavy tungsten and chalcogenide atoms, but their mechanical properties are still mostly unknown. Here, we determine the intrinsic and air-aged mechanical properties of mono-, bi-, and trilayer (1-3L) WS2, WSe2, and WTe2 using a complementary suite of experiments and theoretical calculations. High-quality 1L WS2 has the highest Young's modulus (302.4 ± 24.1 GPa) and strength (47.0 ± 8.6 GPa) of the entire family, overpassing those of 1L WSe2 (258.6 ± 38.3 and 38.0 ± 6.0 GPa, respectively) and WTe2 (149.1 ± 9.4 and 6.4 ± 3.3 GPa, respectively). However, the elasticity and strength of WS2 decrease most dramatically with increased thickness among the three materials. We interpret the phenomenon by the different tendencies for interlayer sliding in an equilibrium state and under in-plane strain and out-of-plane compression conditions in the indentation process, revealed by the finite element method and density functional theory calculations including van der Waals interactions. We also demonstrate that the mechanical properties of the high-quality 1-3L WS2 and WSe2 are largely stable in air for up to 20 weeks. Intriguingly, the 1-3L WSe2 shows increased modulus and strength values with aging in the air. This is ascribed to oxygen doping, which reinforces the structure. The present study will facilitate the design and use of 2D tungsten dichalcogenides in applications such as strain engineering and flexible field-effect transistors.
RESUMEN
Materials with high thermal conductivities (κ) are valuable to solve the challenge of waste heat dissipation in highly integrated and miniaturized modern devices. Herein, we report the first synthesis of atomically thin isotopically pure hexagonal boron nitride (BN) and its one of the highest κ among all semiconductors and electric insulators. Single atomic layer (1L) BN enriched with ^{11}B has a κ up to 1009 W/mK at room temperature. We find that the isotope engineering mainly suppresses the out-of-plane optical (ZO) phonon scatterings in BN, which subsequently reduces acoustic-optical scatterings between ZO and transverse acoustic (TA) and longitudinal acoustic phonons. On the other hand, reducing the thickness to a single atomic layer diminishes the interlayer interactions and hence umklapp scatterings of the out-of-plane acoustic (ZA) phonons, though this thickness-induced κ enhancement is not as dramatic as that in naturally occurring BN. With many of its unique properties, atomically thin monoisotopic BN is promising on heat management in van der Waals devices and future flexible electronics. The isotope engineering of atomically thin BN may also open up other appealing applications and opportunities in 2D materials yet to be explored.
RESUMEN
Surface-enhanced Raman spectroscopy (SERS) is a precise and noninvasive analytical technique that is widely used in chemical analysis, environmental protection, food processing, pharmaceutics, and diagnostic biology. However, it is still a challenge to produce highly sensitive and reusable SERS substrates with a minimum fluorescence background. In this work, we propose the use of van der Waals heterostructures of two-dimensional materials to cover plasmonic metal nanoparticles to solve this challenge. The heterostructures of atomically thin boron nitride (BN) and graphene provide synergistic effects: (1) electrons could tunnel through the atomically thin BN, allowing the charge transfer between graphene and probe molecules to suppress the fluorescence background; (2) the SERS sensitivity is enhanced by graphene via a chemical enhancement mechanism in addition to an electromagnetic field mechanism; and (3) the atomically thin BN protects the underlying graphene and Ag nanoparticles from oxidation during heating for regeneration at 360 °C in the air so that the SERS substrates could be reused. These advances will facilitate wider applications of SERS especially on the detection of fluorescent molecules with higher sensitivity.
RESUMEN
Metal-enhanced fluorescence (MEF) considerably enhances the luminescence for various applications, but its performance largely depends on the dielectric spacer between the fluorophore and plasmonic system. It is still challenging to produce a defect-free spacer having an optimized thickness with a sub-nanometer accuracy that enables reusability without affecting the enhancement. In this study, we demonstrate the use of atomically thin hexagonal boron nitride (BN) as an ideal MEF spacer owing to its multifold advantages over the traditional dielectric thin films. With rhodamine 6G as a representative fluorophore, it largely improves the enhancement factor (up to â¼95 ± 5), sensitivity (10-8 M), reproducibility, and reusability (â¼90% of the plasmonic activity is retained after 30 cycles of heating at 350 °C in air) of MEF. This can be attributed to its two-dimensional structure, thickness control at the atomic level, defect-free quality, high affinities to aromatic fluorophores, good thermal stability, and excellent impermeability. The atomically thin BN spacers could increase the use of MEF in different fields and industries.
RESUMEN
Heat management has become more and more critical, especially in miniaturized modern devices, so the exploration of highly thermally conductive materials with electrical insulation is of great importance. Here, we report that high-quality one-atom-thin hexagonal boron nitride (BN) has a thermal conductivity (κ) of 751 W/mK at room temperature, the second largest κ per unit weight among all semiconductors and insulators. The κ of atomically thin BN decreases with increased thickness. Our molecular dynamic simulations accurately reproduce this trend, and the density functional theory (DFT) calculations reveal the main scattering mechanism. The thermal expansion coefficients of monolayer to trilayer BN at 300 to 400 K are also experimentally measured for the first time. Owing to its wide bandgap, high thermal conductivity, outstanding strength, good flexibility, and excellent thermal and chemical stability, atomically thin BN is a strong candidate for heat dissipation applications, especially in the next generation of flexible electronic devices.