RESUMEN
Modification is widely used to enhance the adsorption performance of pristine hydrochar (HBC) and pyrochar (BC). However, comparisons between modified HBC and BC toward pollutant removal have rarely been reported. In this study, pristine HBC and BC derived from rice straw were first produced, and then citric acid (CA) was used as a modifier to synthesize CA-modified HBC (CAHBC) and CA-modified BC (CABC). Furthermore, the adsorption performance of biochars toward methylene blue (MB) was investigated. The results showed that BC exhibits relatively rough surfaces and contains more minerals (ash), whereas HBC has plentiful O-containing functional groups and fewer minerals. CA modification partially removed minerals from the surface of BC, which weakened the ion exchange, surface complexation, and n-π interaction, resulting in a lower adsorption ability toward MB. By contrast, CA produced more O-containing functional groups on the surface of HBC, which strengthened the hydrogen bonding and electrostatic interaction, thus increasing the adsorption capacity toward MB. The two-compartment model showed a good fit to the adsorption process of MB on CAHBC, and the isotherm data for MB adsorption by HBC and CAHBC are suitable for the Freundlich model. The highest adsorption amount of MB using CAHBC was 80.13 mg·g-1, which was 27.66% higher than that for CABC. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis indicated that the carboxyl groups in the surface functional groups of CAHBC played a crucial role in the MB adsorption process. In addition, CAHBC showed a good performance for a wide range of pH values (4.0-10.0) and under the interference of coexisting ions, and also presented a recycling ability. Furthermore, the adsorption of MB on CAHBC biochar was a spontaneous, exothermic, degree-of-randomness-increasing process. Consequently, CA modification of HBC is a promising strategy and could be used for MB removal from aquatic environments.
Asunto(s)
Carbón Orgánico , Ácido Cítrico , Azul de Metileno , Minerales , Contaminantes Químicos del Agua , Azul de Metileno/química , Adsorción , Ácido Cítrico/química , Carbón Orgánico/química , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisis , Minerales/química , Oxígeno/químicaRESUMEN
Biochar preparation and application is an anticipated pathway for the resource utilization of biogas residue. In this study, biochars were prepared by the pyrolysis of biogas residue from food waste anaerobic digestion (named as BRBCs) under various pyrolysis temperatures (300, 500, 700, and 900 °C), and the effect of pyrolysis temperatures on the physicochemical characteristics of BRBCs was examined. The adsorption performance toward ciprofloxacin (CIP), a typical antibiotic in waterbodies, was also investigated. The results showed that pyrolysis temperature significantly changed the physicochemical properties of BRBCs. In addition, the minerals in the biogas residue, especially SiO2, were rearranged to form a mesoporous structure in biochar through a self-template strategy (without activator). BRBC prepared at 900 °C exhibited a high specific surface area and pore volume, well-developed mesopore structure, and more carbon structure defects, and exhibited the largest CIP adsorption capacity with 70.29 mg g-1, which was ascribed to the combined interaction of pore diffusion, π-π interactions, hydrogen bonding, complexation, and electrostatic forces. Furthermore, the adsorption of CIP by BRBC900 was well described by two-compartment kinetic and Langmuir isotherm models. BRBC900 showed good adsorption performance toward CIP at pH 7-9. The adsorption of CIP by BRBC is a spontaneous, exothermic, entropy-increasing process. Moreover, BRBC also presented a good recycling potential. Therefore, the preparation of mesoporous biochar based on a self-template strategy not only provides an option for the resource utilization of biogas residue but also offers a new option for the treatment of antibiotic wastewater.
Asunto(s)
Biocombustibles , Carbón Orgánico , Ciprofloxacina , Pirólisis , Ciprofloxacina/química , Carbón Orgánico/química , Biocombustibles/análisis , Adsorción , Contaminantes Químicos del Agua/química , Temperatura , Porosidad , CinéticaRESUMEN
The oxygenation of Fe(II)-bearing minerals for hydroxyl radicals (HOâ¢) formation and contaminant attenuation receives increasing attentions. However, information on dissolved organic matter (DOM) with different types, concentrations, and molecular weights (MWs) in manipulating HO⢠formation and contaminant attenuation during mineral oxygenation remain unclear. In this study, four iron-pillared montmorillonites (IPMs) and two DOM samples [e.g., humic acids (HA) and fulvic acids (FA)] were prepared to explore the HO⢠formation and phenanthrene attenuation during the oxygenation of IPMs in the presence or absence of DOMs. Results showed that iron-pillared and high-temperature calcination procedures extended the interlayer domain of IPMs, which provided favorable conditions for a high HO⢠production from 1293 to 14537 µmol kg-1. The surface-absorbed/low crystalline Fe(â ¡) was the predominant Fe(â ¡) fractionations for HO⢠production, and presence of DOMs significantly enhanced the HO⢠production and phenanthrene attenuation. Moreover, regardless of the types and concentrations, the low MW (LMW, <1 kDa) fraction within DOM pool contributed highest to HO⢠production and phenanthrene attenuation, followed by the bulk and high MW (HMW-, 1 kDaâ¼0.45 µm) fractions, and FA exhibited more efficient effects in promoting HO⢠production and phenanthrene attenuation than HA. The fluorescent spectral analysis further revealed that phenolic-like fluorophores in LMW-fraction were the main substances responsible for the enhanced HO⢠production and phenanthrene attenuation. The results deepen our understandings toward the behaviors and fate of aquatic HO⢠and contaminants, and also provide technical guidance for the remediation of contaminated environments.
Asunto(s)
Hierro , Fenantrenos , Hierro/química , Materia Orgánica Disuelta , Radical Hidroxilo/química , Bentonita , Compuestos Ferrosos , Sustancias Húmicas/análisisRESUMEN
The removal of antibiotics in wastewater has attracted increasing attention. Herein, a superior photosensitized photocatalytic system was developed with acetophenone (ACP) as the guest photosensitizer, bismuth vanadate (BiVO4) as the host catalyst and poly dimethyl diallyl ammonium chloride (PDDA) as the bridging complex, and used for the removal of sulfamerazine (SMR), sulfadiazine (SDZ) and sulfamethazine (SMZ) in water under simulated visible light (λ > 420 nm). The obtained ACP-PDDA-BiVO4 nanoplates attained a removal efficiency of 88.9%-98.2% for SMR, SDZ and SMZ after 60 min reaction and achieved kinetic rate constant approximately 10, 4.7 and 13 times of BiVO4, PDDA-BiVO4 and ACP-BiVO4, respectively, for SMZ degradation. In the guest-host photocatalytic system, ACP photosensitizer was found to have a great superiority in enhancing the light absorption, promoting the surface charge separation-transfer and efficient generation of holes (h+) and superoxide radical (·O2-), greatly contributing to the photoactivity. The SMZ degradation pathways were proposed based on the identified degradation intermediates, involving three main pathways of rearrangement, desulfonation and oxidation. The toxicity of intermediates was evaluated and the results demonstrated that the overall toxicity was reduced compared with parent SMZ. This catalyst maintained 92% photocatalytic oxidation performance after five cyclic experiments and displayed a co-photodegradation ability to others antibiotics (e.g., roxithromycin, ciprofloxacin et al.) in effluent water. Therefore, this work provides a facile photosensitized strategy for developing guest-host photocatalysts, which enabling the simultaneous antibiotics removal and effectively reduce the ecological risks in wastewater.
Asunto(s)
Antibacterianos , Fármacos Fotosensibilizantes , Antibacterianos/toxicidad , Fotólisis , Fármacos Fotosensibilizantes/toxicidad , Aguas Residuales , Luz , Bismuto , Vanadatos/toxicidad , Sulfametazina , Sulfadiazina , Sulfamerazina , Agua , CatálisisRESUMEN
Biochar preparation was a feasible strategy for realizing the reduction, harmlessness, and resource utilization of biogas residue (BR) simultaneously. How to enhance the adsorption performance of biogas residue biochar through simple, friendly, and effective way still needs to be investigated. In this study, water-washing pretreatment of BR was adopted before biochar preparation (BRBC-W), and pristine biochar (BRBC) was also produced to serve as control. The adsorption behavior and possible adsorption mechanisms of tetracycline (TC) onto biochars were comprehensively studied. The results showed that water-washing pretreatment could increase the surface area and mesoporous volume of biochar from 358.63 to 391.98 cm3âg-1, and 0.459 to 0.488 cm3âg-1, respectively. More graphitic structure was observed in BRBC-W. In addition, the surface morphology, element content, minerals composition, and surface functional groups also changed in biochar after water-washing pretreatment. The pseudo-second-order and Redlich-Peterson models better descried the adsorption behavior of TC on BCRBC-W. The maximum adsorption capacity of BRBC and BRBC-W for TC based on Langmuir isotherm was 224.93 and 306.94 mg·g-1, respectively. The adsorption affinity of BRBC-W toward TC was greater than that of BRBC. BRBC and BRBC-W can effectively remove TC in water within a wide pH range and under the interference of co-existing ions. The adsorption mechanism of TC onto BRBC and BRBC-W included ore filling, π-π interaction, and hydrogen bonding. The enhancement of TC on BRBC-W by water-washing pretreatment was attributable to the strengthening of pore diffusion and π-π interaction. Therefore, water-washing pretreatment effectively enhanced the adsorption performance of BRB, and BRBC-W was an effective eco-friendly adsorbent for the removal of TC from aquatic environment.
Asunto(s)
Biocombustibles , Contaminantes Químicos del Agua , Adsorción , Agua , Tetraciclina/química , Antibacterianos , Carbón Orgánico/química , CinéticaRESUMEN
The antidepressant fluoxetine (FLX) has gained increasing attention due to its frequent detection in aquatic environments and negative effects on non-target organisms. However, knowledge on the ecotoxicological effects of FLX and its removal by microalgae is still limited. In this study, the ecotoxicological effects of FLX (10 -1000 µg/L) were assessed using batch cultures of the freshwater microalgae Chlorella pyrenoidosa for 10 days based on changes in growth, antioxidant response, and photosynthetic process. The removal efficiency, removal mechanism, and degradation pathway of FLX by C. pyrenoidosa were also investigated. The results showed that the growth of C. pyrenoidosa was inhibited by FLX with a 4 d EC50 of 0.464 mg/L. Additionally, FLX significantly inhibited photosynthesis and caused oxidative stress on day 4. However, C. pyrenoidosa can produce resistance and acclimatize to FLX, as reflected by the declining growth inhibition rate, recovered photosynthetic efficiency, and disappearance of oxidative stress on day 10. Despite the toxicity of FLX, C. pyrenoidosa showed 41.2%- 100% removal of FLX after 10 days of exposure. Biodegradation was the primary removal mechanism, accounting for 88.2%- 92.8% of the total removal of FLX. A total of five metabolites were found in the degradation processes of FLX, which showed less toxicity than FLX. The main degradation pathways were proposed as demethylation, O-dealkylation, hydroxylation, and N-acylation. Our results not only highlight the potential application of microalgae in FLX purification, but also provide insight into the fate and ecological risk of FLX in aquatic environments.
Asunto(s)
Chlorella , Microalgas , Contaminantes Químicos del Agua , Antidepresivos/metabolismo , Antidepresivos/toxicidad , Antioxidantes/metabolismo , Chlorella/metabolismo , Fluoxetina/metabolismo , Fluoxetina/toxicidad , Agua Dulce , Contaminantes Químicos del Agua/análisisRESUMEN
Polycyclic aromatic hydrocarbons in biochars threaten their environmental application. The aging process may affect the concentration of PAHs, potential toxicity, and the properties of biochar. In this study, the aged biochars were obtained by simulated physical aging method (freeze-thaw treatment) and chemical aging method (H2O2 chemical oxidation). The PAH contents in biochars were measured, and their potential toxicity was assessed. Meanwhile, the influence of aging process on the physicochemical properties of biochar was also investigated. This study shows that the change of PAH content of aged biochars depended on pyrolysis temperature, ambient temperature, and oxidant concentration. Furthermore, physical and chemical aging process influenced the distribution of different ring PAHs in biochars. High-ring-number PAHs (four, five, six-ring PAHs) appeared in some aged biochar. Aging at ±20 °C and 0.01 M H2O2 increased the toxic equivalent quantity of all biochars which may be attributed to the change of the physicochemical properties influencing the different PAH ring distribution in biochars. The contribution of PAHs with different rings to TEQ varied in pristine and aged biochars. Physical and chemical aging process significantly affected the properties of biochars, such as element content, ash content, surface area, pore volume, pH, functional groups, and surface morphology. Correlation analysis confirmed that surface area and pore volume are dominant factors determining the PAH content in the biochars. Therefore, the aging process indeed affected the PAH concentration and toxicity of PAHs in biochar. Assessing PAH behavior in biochar over long timescales should not be overlooked.
Asunto(s)
Oryza , Hidrocarburos Policíclicos Aromáticos , Carbón Orgánico/química , Peróxido de Hidrógeno , Hidrocarburos Policíclicos Aromáticos/análisisRESUMEN
Modification of pristine biochars has received increasing attentions due to the significant potential in enhancing adsorption performance. In this work, the co-modification of KOH and KMnO4 on biochar (K-Mn-BC) was performed, with the effect of KOH/KMnO4 modification on biochar properties and their adsorption toward tetracycline (TC) being extensively explored. Results showed that KOH/KMnO4 modification can significantly regulate biochars to form hierarchical structure. The obtained K-Mn-BC was characterized with a high specific surface area (1524.6 m2 g-1) and total pore volume (0.85 cm3 g-1). In addition, the K-Mn-BC exhibited a high adsorption capacity of 584.19 mg g-1 toward TC at 318 K, and pseudo-second-order (R2:0.993ï½0.998) and Langmuir (R2: 0.834ï½0.874) models can fit well with the adsorption behavior. Moreover, the obtained K-Mn-BC can efficiently adsorb TC within a wide pH range (3.0-10.0), and were not affected by the co-existing ions. The possible mechanisms for the high adsorption capacity were ascribed to the pore filling and π-π interaction, following by hydrogen bonding and metal complexation. The obtained K-Mn-BC is a suitable adsorbent for TC removal from water due to the hierarchical structure, high adsorption capacity, and stable adsorption effect.
Asunto(s)
Compuestos Heterocíclicos , Contaminantes Químicos del Agua , Adsorción , Antibacterianos , Carbón Orgánico/química , Cinética , Tetraciclina , Triticum , Contaminantes Químicos del Agua/análisisRESUMEN
Pyrolysis process significantly influences the physicochemical properties and potential application of magnetic porous biochars (MPBCs). However, the effects of pyrolysis temperature on the properties of MPBCs as well as substantial adsorption are still unclear. This study reported a facile method to obtain the MPBC from tea waste via pyrolysis of a mixture of hydrochar, KHCO3, and FeCl3·6H2O under different temperatures (500-800 °C), and explored further the adsorption toward tetracycline (TC). Results showed pyrolysis temperature obviously influenced the physicochemical properties of MPBCs, and MPBC pyrolyzed at 700 °C (MPBC-700) has a highest specific surface area (1066 m2 g-1) and pore volume (2.693 cm3 g-1). However, the adsorption potential increased consistently from 59.35 mg g-1 for MPBC-500 to 333.22 mg g-1 for MPBC-800, suggesting that the surface area and pore volume were not the only factors determining TC adsorption. Further analysis showed that the pore-filling, π-π interaction, complexation, and hydrogen bonding contributed together to TC adsorption. Moreover, all MPBCs possessed a high saturation magnetization, indicating the easy separation by an external magnet. Therefore, MPBCs (especially at 700 °C) can act as the excellent adsorbents for contaminant removal due to their high separation, adsorption, and reuse performance.
Asunto(s)
Pirólisis , Contaminantes Químicos del Agua , Adsorción , Carbón Orgánico , Fenómenos Magnéticos , Porosidad , Té , Temperatura , TetraciclinaRESUMEN
Activation is an important pathway that can enhance the adsorption capacity of biochar. In this study, a modified tea waste biochar (MTWBC) was prepared via a two-step pyrolysis approach with KHCO3 activation. Pristine tea waste biochar (TWBC) was also produced as control via one-step pyrolysis without activation. Various characterizations were undertaken to investigate the influence of modification on the morphology, composition, carbon structure, surface area, and functional group of biochar, including scanning electron microscope (SEM), surface area and pore analyzer, element analysis, point of zero charge (pHPZC), X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). After KHCO3 activation treatment, the surface area, total pore volume, and micropore volume of MTWBC reached 1981 m2·g-1, 0.8547 cm3·g-1, and 0.6439 cm3·g-1 which were 7.34-fold, 7.27-fold, and 7.30-fold increases, respectively, compared with TWBC. The aromaticity, hydrophilicity, and polarity of the MTWBC increased after modification. More graphitization with less defective structures occurred in MTWBC after modification. The C-, O-, and N-containing groups in MTWBC also changed after the reaction of KHCO3. The pseudo-second-order and Freundlich models best described the adsorption process on biochar. The maximum adsorption capacity of tetracycline (TC) on MTWBC reached 293.46 mg·g-1, which was 15-fold more than that of TWBC (19.68 mg·g-1). An alkaline environment decreased the TC adsorption on biochars. The presence of Na+, K+, Ca2+, and Mg2+ inhibited TC adsorption onto biochars. The influence of Cu2+ on TC adsorption by biochars depends on its initial concentration. The enhanced adsorption capacity of TC on MTWBC was mainly attributable to the large surface area, the improved pore volume, and more aromatic structure. The adsorption mechanism was based on pore filling and π-π EDA interaction. Therefore, KHCO3 activated biochar has the potential to remove TC from aquatic environments.
Asunto(s)
Té , Contaminantes Químicos del Agua , Adsorción , Carbón Orgánico , Cinética , Espectroscopía Infrarroja por Transformada de Fourier , TetraciclinaRESUMEN
Tetracycline (TC) adsorption capacity on pristine biochar was limited. Biochar modification can greatly improve its adsorption amount. In this study, rice straw was mixed with FeCl3·6H2O and urea to prepare a Fe-N modified biochar via a one-pot pyrolysis method at 700 °C. Meanwhile, pristine biochar (RSBC), urea modified biochar (N-RSBC), FeCl3·6H2O-modified biochar (Fe-RSBC) were produced as control. More functional groups, more graphited carbon structure, and magnetic components were observed in Fe-N-RSBC. Compared with RSBC, the surface area, total pore and micropore volume of Fe-N-RSBC increased 3.4-fold, 3.0-fold and 2.3-fold, respectively. The maximum capacity of TC adsorption on Fe-N-RSBC reached 156 mg·g-1, which was 5.4 - fold, 8.2 - fold and 1.9 - fold increase to that of RSBC, N-RSBC, Fe-RSBC, respectively. The mechanism of TC adsorption on Fe-N-RSBC involved pore filling, hydrogen-bondinteraction, surface complexation, and π-π interaction. Therefore, Fe-N-RSBC can be used as an effective adsorbent for TC removal from aqueous solution.
Asunto(s)
Contaminantes Químicos del Agua , Adsorción , Carbón Orgánico , TetraciclinaRESUMEN
The properties of biochars and their adsorption performance are highly dependent on the carbonation methods. In this study, five carbonation methods, namely, hydrothermal treatment (HT), direct carbonization (BC), carbonization of hydrochar (HBC), KHCO3 activation carbonation (KBC), and KHCO3 activation carbonation of hydrochar (KHBC), were adopted to prepare tea waste biochars. Adsorption behaviors and mechanisms toward tetracycline (TC) by biochar in the aquatic environment were investigated. The results showed that carbonation methods significantly influence the morphology, carbon structure, chemical composition, and functional groups of the biochars based on the characterization of surface area and pore volume analysis, Fourier Transform Infrared Spectroscopy, Raman spectrum, Scanning Electron Microscope, Transmission Electron Microscope, X-ray photoelectron spectroscopy, X-Ray Diffraction, and elemental analysis. Combination of hydrothermal treatment with KHCO3 activation can significantly increase the surface area and enlarge the pore structure of biochar (KHBC and KBC). The BET of KHCO3-activated BCs nearly increased 280 times (KHBC: 1350.80 m2 g-1; KBC: 1405.06 m2 g-1). BET, total pore volume and micropores volume of biochar has a positive influence on TC adsorption capacity. In addition, all adsorption processes can be well fitted by Langmuir and pseudo-second-order kinetic models. The maximum adsorption capacity of KHCO3-activated BCs nearly increased approximately 40 times (KHBC: 451.45 mg g-1; KBC: 425.17 mg g-1). The dominant mechanisms of biochar-adsorbed TC were pore-filling effect and π-π interactions, followed by hydrogen bonds and electrostatic interactions. Therefore, KHBC has the potential to act as sorbents for TC removal from aquatic environment.
Asunto(s)
Contaminantes Químicos del Agua , Adsorción , Carbón Orgánico , Cinética , Soluciones , Espectroscopía Infrarroja por Transformada de Fourier , Té , TetraciclinaRESUMEN
The nonsteroidal anti-inflammatory drug diclofenac (DCF) is considered a contaminant of emerging concern. DCF can co-exist with heavy metals in aquatic environments, causing unexpected risks to aquatic organisms. This study aimed to assess the combined effects of DCF and cadmium (Cd) at environmentally relevant concentrations on the bioconcentration and status of oxidative stress and detoxification in Chironomus riparius larvae. The larvae were exposed to DCF (2 and 20 µg L-1) and Cd (5 and 50 µg L-1) alone or in mixtures for 48 h. The combined exposure to DCF and Cd was found to reciprocally facilitate the accumulation of each compound in larvae compared with single exposures. As indicated by the antioxidant enzyme activities, reduced glutathione levels, and malondialdehyde contents, the low concentration of the mixture (2 µg L-1 DCF + 5 µg L-1 Cd) did not alter the oxidative stress status in larvae, while the high concentration of the mixture (20 µg L-1 DCF + 50 µg L-1 Cd) induced stronger oxidative damage to larvae compared with single exposures. The expression levels of eight genes (CuZnSOD, MnSOD, CAT, GSTd3, GSTe1, GSTs4, CYP4G, and CYP9AT2) significantly decreased due to the high concentration of the mixture compared with single exposures in most cases. Overall, the results suggest that the mixture of DCF and Cd might exert greater ecological risks to aquatic insects compared with their individual compounds.
Asunto(s)
Cadmio/toxicidad , Chironomidae/fisiología , Diclofenaco/toxicidad , Contaminantes Químicos del Agua/toxicidad , Animales , Antiinflamatorios no Esteroideos/farmacología , Cadmio/metabolismo , Chironomidae/efectos de los fármacos , Diclofenaco/metabolismo , Inactivación Metabólica/efectos de los fármacos , Larva/efectos de los fármacos , Malondialdehído/metabolismo , Metales Pesados/metabolismo , Estrés Oxidativo/efectos de los fármacos , Superóxido Dismutasa/metabolismo , Contaminantes Químicos del Agua/metabolismoRESUMEN
Tea waste biochar (TWBC) was prepared at 300â, 500â, and 700â under oxygen-limited atmosphere, and was characterized by elemental analysis, Brunauer-Emmett-Teller measurement, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. TWBC was then used to remove tetracycline from aqueous solution. The influences of solid-to-liquid ratio, pH, ionic types, and strength were investigated. The potential mechanism between tetracycline and TWBC was also explored. The results showed that the proper solid-to-liquid ratio was 4 g·L-1. The pH of the solution had little influence on the removal of tetracycline. The inhibition effects of cation ions on tetracycline follows Mg2+ > Ca2+ > K+ > Na+. The NH4+ in the solution can slightly promote the adsorption of tetracycline by TWBC700. However, the existence of Cu can decrease the adsorption effect of tetracycline by TWBC700. Increasing temperature can improve the adsorption effect of tetracycline by TWBC700. The pseudo-second-order and Langmuir model can well fit the adsorption process of tetracycline onto TWBC. The adsorption capacity of tetracycline by TWBC was TWBC700 > TWBC500 > TWBC300. The mechanisms of tetracycline by TWBC referred to the pore-filling effect, hydrogen binding, and π-π interaction. Therefore, high-temperature TWBC has the potential to act as an adsorbent for removing tetracycline from wastewater.
RESUMEN
Diclofenac (DCF), a non-steroidal anti-inflammatory drug, is widespread in aquatic environments and coexists with heavy metals to form combined pollution. However, the interactive effects of DCF and heavy metals on aquatic organisms remain unknown. This study aimed to investigate the interactive effects of DCF and copper (Cu) on the bioconcentration, oxidative stress status and detoxification-related gene expression in crucian carp (Carassius auratus). Fish were exposed to Cu (100⯵gâ¯L-1) and DCF (1, 10, 100 and 1000⯵gâ¯L-1) alone or in combination for 7 days. Results obtained showed that the treatment of Cu combined with high levels of DCF (100 and 1000⯵gâ¯L-1) significantly decreased tissue concentrations of DCF and Cu compared to the correspondingly individual exposure. Concerning oxidative stress status, as reflected by the activities of antioxidant enzymes and malondialdehyde content, low exposure concentrations of DCF (1 and 10⯵gâ¯L-1) seemed to mitigate the oxidative stress induced by Cu, whereas the co-exposure of Cu with the highest level of DCF (1000⯵gâ¯L-1) led to stronger oxidative damage in fish liver than Cu exposure alone. With regarding to detoxification-related genes, in most cases, the expressions of cyp 1a, cyp 3a, gstα, gstπ, pxr and P-gp in crucian carp were significantly altered upon exposure to the compounds in combination compared to exposure to the compounds individually. Collectively, these findings indicate the capacity of each of these pollutants to alter bioconcentration potential, pro-oxidative effects and detoxification-related gene responses of the other when both co-occur at specific concentrations.
Asunto(s)
Antiinflamatorios no Esteroideos/toxicidad , Carpas/fisiología , Cobre/toxicidad , Diclofenaco/toxicidad , Contaminantes Químicos del Agua/toxicidad , Animales , Antiinflamatorios no Esteroideos/metabolismo , Bioacumulación , Biomarcadores/metabolismo , Carpas/metabolismo , Cobre/metabolismo , Diclofenaco/metabolismo , Carpa Dorada/metabolismo , Inactivación Metabólica/efectos de los fármacos , Hígado/metabolismo , Malondialdehído/metabolismo , Estrés Oxidativo/efectos de los fármacos , Contaminantes Químicos del Agua/metabolismoRESUMEN
The removal of tetracycline (TC) from solution is an important environmental issue. Here we prepared an adsorbent hydrous ferric oxide (HFO) by adjusting a FeCl3·6H2O solution to neutral pH. HFO was characterized by a surface area analyzer, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), and was used to remove TC from solution. The influence of pH, solid-to-liquid ratio, ionic type, and strength on TC removal was investigated. Adsorption kinetics and isotherms were also determined. HFO after adsorption of TC was analyzed by FTIR and XPS to investigate the adsorption mechanism. The results showed that the adsorption of TC increased from 88.3% to 95% with increasing pH (3.0-7.0) and then decreased. K+ ions had little effect on TC adsorption by HFO. However, Ca2+ and Mg2+ reduced the adsorption of TC on HFO. When the concentrations of Ca2+ and Mg2+ were increased, the inhibitory effect was more obvious. Pseudo-second-order kinetics and the Langmuir model fitted the adsorption process well. The maximum adsorption capacity of TC on HFO reached 99.49 mg·g-1. The adsorption process was spontaneous, endothermic, and increasingly disordered. Combination analysis with FTIR and XPS showed that the mechanism between TC and HFO involved electrostatic interactions, hydrogen interactions, and complexation. Therefore, the environmental behavior of TC could be affected by HFO.
Asunto(s)
Adsorción , Antibacterianos/química , Restauración y Remediación Ambiental/métodos , Compuestos Férricos/química , Tetraciclina/química , Contaminantes Químicos del Agua/química , Concentración de Iones de Hidrógeno , CinéticaRESUMEN
2,7-Dibromocarbazole (2,7-DBCB) and 3,6-dibromocarbazole (3,6-DBCB) are emerging environmental pollutants, being potentially high risks to human health. In this study, interactions of the two compounds with human serum albumin (HSA) and bovine serum albumin (BSA) were investigated by molecular modeling, density functional theory calculations (DFT) and multispectral techniques. The static quenching interaction deduced in the fluorescence quenching experiment is confirmed by the time-resolved analyses. The interactions of the two compounds with HSA/BSA induce molecular microenvironment and conformation changes, as assessed by synchronous and 3D fluorescence spectra, together with a destruction of polypeptide carbonyl hydrogen bond network by circular dichroism and Fourier transform infrared analyses. The thermodynamic analysis indicated that the spontaneous interaction was hydrogen bonding and hydrophobic forces. The binding constant Ka at 298â¯K was 3.54â¯×â¯105â¯M-1 in HSA-2,7-DBCB, 6.63â¯×â¯105â¯M-1 in HSA-3,6-DBCB, 1.32â¯×â¯105â¯M-1 in BSA-2,7-DBCB and 2.17â¯×â¯105â¯M-1 in BSA-3,6-DBCB. These results indicates that 3,6-DBCB binds HSA/BSA more strongly than 2,7-DBCB, which was estimated with DFT calculations. Site marker competition experiments coupled with molecular modeling studies confirmed that both compounds bind HSA/BSA at site I (subdomain IIA). The results suggest that interactions between 2,7-DBCB and 3,6-DBCB with HSA and BSA may affect the normal physiological activities in human and animals.
Asunto(s)
Carbazoles/química , Contaminantes Ambientales/química , Modelos Moleculares , Albúmina Sérica Bovina/química , Animales , Dicroismo Circular , Teoría Funcional de la Densidad , Fluorescencia , Humanos , Enlace de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Albúmina Sérica , TermodinámicaRESUMEN
The removal of tetracycline antibiotics from water is currently an important environmental issue. Here we prepared an iron-loaded granular activated carbon catalyst (GAC-Fe) through a one-step calcination method to remove tetracycline antibiotics from aqueous solution. The GAC-Fe was characterized by Fourier transform infrared absorption spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction analysis. The effect of different influencing factors on the removal behavior of tetracycline antibiotics was studied, such as the solid-to-liquid ratio, H2O2 dosage, environmental temperature, initial pH, and contact time. The removal mechanism was explored through Fe ion dissolution and a free radical quenching experiment. The results show that the optimum solid-to-liquid ratio was 3.0 gâL-1 and the suitable H2O2 dosage was 1.0 mL (3%). The applicable environmental temperature was 25 °C and the appropriate pH value was 2.0. The removal rate of tetracycline antibiotics tended to be stable in a contact time of 600 min. The main mechanism of tetracycline antibiotic removal by GAC-Fe was heterogeneous catalytic reaction through iron ion leaching and free radical inhibition experiment. The hydroxyl radical played a major role during the removal process. The partially dissolved iron ions initiated a homogeneous catalytic reaction. However, heterogeneous catalytic degradation was the main reaction. The GAC-Fe could still remove tetracycline antibiotics after five cycles, especially for methacycline and minocycline. Our work suggests that the GAC-Fe catalyst has potential as a remediation agent for tetracycline antibiotics in aqueous solution.
Asunto(s)
Antibacterianos/química , Catálisis , Carbón Orgánico/química , Hierro/química , Tetraciclinas/química , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Peróxido de Hidrógeno/químicaRESUMEN
Although sulfadiazine (SDZ) is widespread in aquatic environments, information regarding the effects of SDZ on aquatic insects is still limited. In the present study, the bioconcentration and the effects of SDZ on the antioxidant system and the expression of endocrine and stress-related genes in Chironomus riparius larvae were investigated. The larvae were exposed to SDZ at the nominal concentrations of 2, 20 and 200 µg/L for 48 h. The results showed that SDZ was taken up by C. riparius despite presenting low bioconcentration factor values (0.99-3.92). In addition, superoxide dismutase activity was markedly reduced compared with the control group, whereas the levels of malondialdehyde were not significantly affected by SDZ. Moreover, the mRNA expression of genes related to heat shock proteins (Hsp70 and Hsp27) and ecdysone pathway (EcR and E74) were significantly up-regulated following all SDZ treatments. In aggregate, our work provides novel and interesting results regarding the potential biochemical and genetic effects of SDZ on freshwater insects.
Asunto(s)
Antibacterianos/toxicidad , Chironomidae/efectos de los fármacos , Sulfadiazina/toxicidad , Contaminantes Químicos del Agua/toxicidad , Animales , Antibacterianos/farmacocinética , Chironomidae/genética , Chironomidae/metabolismo , Expresión Génica/efectos de los fármacos , Proteínas de Choque Térmico HSP27/genética , Proteínas HSP70 de Choque Térmico/genética , Proteínas de Insectos/genética , Malondialdehído/metabolismo , Receptores de Esteroides/genética , Sulfadiazina/farmacocinética , Superóxido Dismutasa/metabolismo , Contaminantes Químicos del Agua/farmacocinéticaRESUMEN
The propagation of antibiotic resistance is a challenge for human health worldwide, which has drawn much attention on the reduction of the resistance genes. To understand their occurrence during different treatment processes, in this study, four classes of antibiotics (tetracyclines, sulfonamides, quinolones, and macrolides), eight antibiotic resistance genes (ARGs) (tetB, tetW, sul1, sul2, gyrA, qepA, ermB, and ermF), and two mobile elements (int1 and int2) were investigated in a typical pharmaceutical plant. The total concentrations of antibiotics were detected in the range of 2.6 × 102 to 2.5 × 103 ng/L in the treatment processes, and the high abundance of ARGs was detected in the biological treatment unit. The dynamic trend analysis showed that antibiotics were partially removed in the anaerobic/aerobic processes, where ARGs were proliferated. The abundance of tetB and gyrA genes was positively correlated with pH and EC (p < 0.05), and the tetW, sul1 and sul2 genes were significantly correlated with TOC, TN, and DO (p < 0.05), indicating the influence of physicochemical properties of the solution on the levels of ARG subtypes. The phylogenetic analysis showed that the tetW clones had high homology with some pathogenic microorganisms, such as Klebsiella pneumonia and Neisseria meningitides, which would threaten human health. Results indicated that the horizontal transfer acted as a major driver in the ARGs evolution.