RESUMEN
Electrochemical reduction of CO2 is an important way to achieve carbon neutrality, and much effort has been devoted to the design of active sites. Apart from elevating the intrinsic activity, expanding the functionality of active sites may also boost catalytic performance. Here we designed "negatively charged Ag (nc-Ag)" active sites featuring both the intrinsic activity and the capability of regulating microenvironment, through modifying Ag nanoparticles with atomically dispersed Sn species. Different from conventional active sites (which only mediate the surface processes by bonding with the intermediates), the nc-Ag sites could also manipulate environmental species. Therefore, the sites could not only activate CO2, but also regulate interfacial H2O and CO2, as confirmed by operando spectroscopies. The catalyst delivers a high current density with a CO faradaic efficiency of 97 %. Our work here opens up new opportunities for the design of multifunctional electrocatalytic active sites.
RESUMEN
Hydroxide exchange membrane fuel cells (HEMFCs) have the advantages of using cost-effective materials, but hindered by the sluggish anodic hydrogen oxidation reaction (HOR) kinetics. Here, we report an atomically dispersed Ir on Mo2C nanoparticles supported on carbon (IrSA-Mo2C/C) as highly active and stable HOR catalysts. The specific exchange current density of IrSA-Mo2C/C is 4.1 mA cm-2ECSA, which is 10 times that of Ir/C. Negligible decay is observed after 30,000-cycle accelerated stability test. Theoretical calculations suggest the high HOR activity is attributed to the unique Mo2C substrate, which makes the Ir sites with optimized H binding and also provides enhanced OH binding sites. By using a low loading (0.05 mgIr cm-2) of IrSA-Mo2C/C as anode, the fabricated HEMFC can deliver a high peak power density of 1.64 W cm-2. This work illustrates that atomically dispersed precious metal on carbides may be a promising strategy for high performance HEMFCs.
RESUMEN
Seawater electrolysis offers a renewable, scalable, and economic means for green hydrogen production. However, anode corrosion by Cl- pose great challenges for its commercialization. Herein, different from conventional catalysts designed to repel Cl- adsorption, we develop an atomic Ir catalyst on cobalt iron layered double hydroxide (Ir/CoFe-LDH) to tailor Cl- adsorption and modulate the electronic structure of the Ir active center, thereby establishing a unique Ir-OH/Cl coordination for alkaline seawater electrolysis. Operando characterizations and theoretical calculations unveil the pivotal role of this coordination state to lower OER activation energy by a factor of 1.93. The Ir/CoFe-LDH exhibits a remarkable oxygen evolution reaction activity (202 mV overpotential and TOF = 7.46 O2 s-1) in 6 M NaOH+2.8 M NaCl, superior over Cl--free 6 M NaOH electrolyte (236 mV overpotential and TOF = 1.05 O2 s-1), with 100% catalytic selectivity and stability at high current densities (400-800 mA cm-2) for more than 1,000 h.
RESUMEN
Electrocatalytic synthesis of hydrogen peroxide (H2O2) in acidic media is an efficient and eco-friendly approach to produce inherently stable H2O2, but limited by the lack of selective and stable catalysts under industrial-relevant current densities. Herein, we report a diatomic cobalt catalyst for two-electron oxygen reduction to efficiently produce H2O2 at 50-400 mA cm-2 in acid. Electrode kinetics study shows a >95% selectivity for two-electron oxygen reduction on the diatomic cobalt sites. In a flow cell device, a record-high production rate of 11.72 mol gcat-1 h-1 and exceptional long-term stability (100 h) are realized under high current densities. In situ spectroscopic studies and theoretical calculations reveal that introducing a second metal into the coordination sphere of the cobalt site can optimize the binding strength of key H2O2 intermediates due to the downshifted d-band center of cobalt. We also demonstrate the feasibility of processing municipal plastic wastes through decentralized H2O2 production.
RESUMEN
High-performance platinum-group-metal-free alkaline hydrogen oxidation reaction catalysts are essential for the hydroxide exchange membrane fuel cells, which generally require high Pt loadings on the anode. Herein, we report a highly active hydrogen oxidation reaction catalyst, NiCuCr, indicated by the hydroxide exchange membrane fuel cell with a high peak power density of 577 mW cm-2 (18 times as high as the Ni/C anode) and a stability of more than 150 h (a degradation rate slower by 7 times than the Ni/C anode). The spectroscopies demonstrate that the alloy effect from Cu weakens the hydrogen binding, and the surface Cr2O3 species enhance the interfacial water binding. Both effects bring an optimized apparent hydrogen binding energy and thus lead to the high hydrogen oxidation reaction performance of NiCuCr. These results suggest that the apparent hydrogen binding energy determines the hydrogen oxidation reaction performance and that its tuning is beneficial toward high electrocatalytic performance.
RESUMEN
Simultaneous electrochemical reduction of nitrite and carbon dioxide (CO2 ) under mild reaction conditions offers a new sustainable and low-cost approach for urea synthesis. However, the development of urea electrosynthesis thus far still suffers from low selectivity due to the high energy barrier of * CO formation and the subsequent CâN coupling. In this work, a highly active dendritic Cu99 Ni1 catalyst is developed to enable the highly selective electrosynthesis of urea from co-reduction of nitrite and CO2 , reaching a urea Faradaic efficiency (FE) and production rate of 39.8% and 655.4 µg h-1 cm-2 , respectively, at -0.7 V versus reversible hydrogen electrode (RHE). In situ Fourier-transform infrared spectroscopy (FT-IR) measurements together with density functional theory (DFT) calculations demonstrate that Ni doping into Cu can significantly enhance the adsorption energetics of the key reaction intermediates and facilitate the CâN coupling. This work not only provides a new strategy to design efficient electrocatalysts for urea synthesis but also offers deep insights into the mechanism of CâN coupling during the co-reduction of nitrite and CO2 .
RESUMEN
The rechargeable zinc-air batteries (ZABs) are promising energy storage devices, but their performance is limited by the air electrode, coming from the contradictory wettability requirements of the air electrode at charging and discharging. Herein, to improve the mass transport and adapt to its different requirements when charging and discharging the ZABs, a Janus air electrode was fabricated with a void-rich, superaerophobic oxygen evolution reaction catalytic layer and a dense superhydrophobic oxygen reduction reaction catalytic layer. The ZAB using the Janus air electrode exhibits a low voltage gap of 0.78 V for charging and discharging at 10 mA cm-2, and it can stably work for more than 1 month (1100 cycles) with the decay of only about 10%. Wettability analyses revealed that the Janus superwetting structure provides good electrolyte contact, improves the mass transfer of O2, and prevents electrolyte leakage and flooding, leading to the high performance. These results suggest the advantage of the Janus electrode in reversible energy-converting devices.
RESUMEN
Hydrogen evolution reaction (HER) in neutral media is of great practical importance for sustainable hydrogen production, but generally suffers from low activities, the cause of which has been a puzzle yet to be solved. Herein, by investigating the synergy between Ru single atoms (RuNC) and RuSex cluster compounds (RuSex) for HER using ab initio molecular dynamics, operando X-ray absorption spectroscopy, and operando surface-enhanced infrared absorption spectroscopy, we establish that the interfacial water governs neutral HER. The rigid interfacial water layer in neutral media would inhibit the transport of H2O*/OH* at the electrode/electrolyte interface of RuNC, but the RuSex can promote H2O*/OH* transport to increase the number of available H2O* on RuNC by disordering the interfacial water network. With the synergy of RuSex and RuNC, the resulting neutral HER performance in terms of mass-specific activity is 6.7 times higher than that of 20 wt.% Pt/C at overpotential of 100 mV.
RESUMEN
Electrochemical CO2 reduction (ECR) is becoming an increasingly important technology for achieving carbon neutrality. Inspired by the structure of naturally occurring Mo-dependent enzymes capable of activating CO2 , a heteronuclear Mo-Se dual-single-atom electrocatalyst (MoSA-SeSA) for ECR into CO with a Faradaic efficiency of above 90% over a broad potential window from -0.4 to -1.0 V versus reversible hydrogen electrode is demonstrated here. Both operando characterization and theoretical simulation results verify that MoSA acts as central atoms that directly interact with the ECR feedstock and intermediates, whereas the SeSA adjacent to MoSA modulates the electronic structure of MoSA through long-range electron delocalization for inhibiting MoSA poisoning caused by strong CO adsorption. In addition, the SeSAs far from MoSA help suppress the competing hydrogen evolution side reaction and accelerate the CO2 transport by repelling H2 O. This work provides new insight into the precise regulation and in-depth understanding of multisite synergistic catalysis at the atomic scale.
RESUMEN
Amorphous Pd-P metal-metalloid alloy nanoparticles showed a higher electrochemical ethanol oxidation reaction performance than crystalline Pd nanoparticles. The high performance was attributed to the rich defective coordination unsaturated sites and the P alloying, which enhanced the OH adsorption.
RESUMEN
Developing highly efficient, low-cost electrocatalysts with long-time stability at high current density working conditions for hydrogen evolution reaction (HER) remains a great challenge for the large-scale commercialization of hydrogen production from water electrolysis. Herein, the Cr-doped CoP nanorod arrays on carbon cloth (Cr-CoP-NR/CC) is reported as high performance HER catalysts with overpotentials of 38 and 209 mV at the HER current densities of 10 and 500 mA cm-2 , respectively, outperforming the performance of the commercial Pt/C at high current density. And its HER performance shows almost no loss after 20 h working at 500 mA cm-2 . The high performance is attributed to the Cr doping, which optimizes the hydrogen binding energy of CoP and prevents its oxidation. The nanorod array structure helps the escaping of the generated hydrogen gas, which is suitable for working at high current density. The obtained Cr-CoP-NR/CC catalyst shows the potential to replace the costly Pt-based HER catalysts in the water electrolyzer.
RESUMEN
The electrochemical CO2 reduction reaction (CO2RR) offers an environmentally benign pathway for renewable energy conversion and further regulation of the environmental CO2 concentration to achieve carbon cycling. However, developing desired electrocatalysts with high CO Faradaic efficiency (FECO) at an ultralow overpotential remains a grand challenge. Herein, we report an effective CO2RR electrocatalyst that features Ag single-atom coordinated with three nitrogen atoms (Ag1-N3) anchored on porous concave N-doped carbon (Ag1-N3/PCNC), which is identified by X-ray absorption spectroscopy. Ag1-N3/PCNC shows a low CO2RR onset potential of -0.24 V, high maximum FECO of 95% at -0.37 V, and high CO partial current density of 7.6 mA cm-2 at -0.55 V, exceeding most of the previous Ag electrocatalysts. The in situ infrared absorption spectra technique proves that Ag1-N3 single-atom sites have sole linear-adsorbed CO and can easily desorb *CO species to achieve the highest CO selectivity in comparison with the corresponding counterparts. This work provides significant inspiration on boosting CO2RR by tuning the active center at an atomic level to achieve a specific absorption with an intermediate.
RESUMEN
Multielemental nanoparticles (MENPs) provide the possibility to integrate multiple catalytic functions from different elements into one nanoparticle. However, it is difficult to synthesize Ag-based MENPs with transition metals such as Ni and Fe because of the strong phase segregation between Ag and the other metals. Here, we show that nonmetal element P can help the amalgamation of Ag with other metals. Ag-Ni-Fe-P MENPs are successfully synthesized by a solution-phase chemistry, and they demonstrate excellent bifunctional oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) catalytic activities (the potential gap of the potential at 10 mA·cm-2 for OER and half-wave potential for ORR is 630 mV). More important, the synergistic effect from the MENPs endows them with even higher ORR or OER activity than the Ag or NiFeP nanoparticles. A rechargeable Zn-air battery is fabricated by using the Ag-Ni-Fe-P MENPs as the air electrode. The battery has an energy efficiency of â¼60% at 10 mA cm-2. Its performance is almost unchanged during a working period of 250 h, surpassing the Pt/C+IrO2-based battery. These results suggest that the rationally designed MENPs can integrate multiple catalytic functions together and achieve a synergistic effect, which can be used as high-performance multifunctional catalysts.
RESUMEN
Proton exchange membrane water electrolyzer can sustainably and environmentally friendly produce hydrogen. However, it is hindered by the lack of high-performance anode catalysts for oxygen evolution reaction (OER) in acid electrolyte. Herein, IrCuNi deeply concave nanocubes (IrCuNi DCNCs) are successfully synthesized from the selective etching of the facet of cubic nanoparticles, and they significantly boost the OER. The obtained IrCuNi DCNCs show high activity toward OER in the acidic electrolyte, which only requires an overpotential of 273 mV to achieve the OER current density of 10 mA cm-2 at a low Ir loading of 6.0 µgIr cm-2. The precious metal based mass activity is 6.6 A mgIr-1 at 1.53 V, which is 19 times as high as that of pristine Ir. It demonstrates that the outstanding catalytic performance is beneficial from the well-defined multimetal concave nanostructures, which may shed light on the fabrication of efficient water electrolyzers.
RESUMEN
The development of cost-effective hydroxide exchange membrane fuel cells is limited by the lack of high-performance and low-cost anode hydrogen oxidation reaction catalysts. Here we report a Pt-free catalyst Ru7Ni3/C, which exhibits excellent hydrogen oxidation reaction activity in both rotating disk electrode and membrane electrode assembly measurements. The hydrogen oxidation reaction mass activity and specific activity of Ru7Ni3/C, as measured in rotating disk experiments, is about 21 and 25 times that of Pt/C, and 3 and 5 times that of PtRu/C, respectively. The hydroxide exchange membrane fuel cell with Ru7Ni3/C anode can deliver a high peak power density of 2.03 W cm-2 in H2/O2 and 1.23 W cm-2 in H2/air (CO2-free) at 95 °C, surpassing that using PtRu/C anode catalyst, and good durability with less than 5% voltage loss over 100 h of operation. The weakened hydrogen binding of Ru by alloying with Ni and enhanced water adsorption by the presence of surface Ni oxides lead to the high hydrogen oxidation reaction activity of Ru7Ni3/C. By using the Ru7Ni3/C catalyst, the anode cost can be reduced by 85% of the current state-of-the-art PtRu/C, making it highly promising in economical hydroxide exchange membrane fuel cells.
RESUMEN
Liquid metal forms a thin layer of oxide skin via exposure to oxygen and this layer could be exfoliated by mechanical delamination or gas-injection/solvent-dispersion. Although the room-temperature fabrication of two-dimensional (2D) oxide through gas-injection and water-dispersion has been successfully demonstrated, a synthetic protocol in nonaqueous solvent at elevated temperature still remains as a challenge. Herein we report the mass-production of amorphous 2D SnOx nanoflakes with Bi decoration from liquid Sn-Bi alloy and selected nonaqueous solvents. The functional groups of the solvents play a key role in determining the final morphology of the product and the hydroxyl-rich solvents exhibit the best control toward 2D SnOx. The different solvent-oxide interaction that facilitates this phase-transfer process is further discussed on the basis of DFT calculation. Finally, the as-obtained 2D SnOx is evaluated in electrocatalytic CO2 reduction with high faradaic efficiency (>90%) of formic acid and stable performance over 10 h.