RESUMEN
Lead (Pb) contamination in water requires improved decontamination technologies. The addition of phosphate to precipitate Pb2+ is a widely used method for remediating Pb in soil and water, though it has certain limitations. This study focuses on novel 3D mesoporous layered double hydroxide (LDH) sorbents functionalized with phosphate anions for Pb2+ removal from contaminated waters. Our innovative strategy involves converting a sacrificial template metal-organic frameworks (MOFs) structure (MIL-88A(Fe)) into NixFe LDH, followed by an anion exchange reaction with phosphate anions. This process preserves the 3D microrod architecture of MIL-88A and prevents deleterious LDH particle aggregation. The synthesis results in stable microrod crystals, 1-2 µm long, composed of 3D assemblies of NixFe-PO4 LDH nanoplatelets with a specific surface area exceeding 110 m2/g. The novel LDH materials display fast adsorption kinetics (pseudo-second order model) and remarkably high Pb2+ removal performances (Langmuir isotherm model) with a capacity of 538 mg/g, surpassing other reported adsorbents. LDH-PO4 exhibits high selectivity for Pb2+ over competing ions like Ni2+ and Cd2+ (selectivity order is: Pb2+ > Ni2+ > Cd2+). Removal of Pb2+ from NixFeLDH/88A-PO4 involves various mechanisms, including surface complexation and surface precipitation of lead phosphate or lead hydroxide phases as revealed by structural characterization techniques.
RESUMEN
Slow-release fertilizers (SRFs) form the core of innovative strategies in sustainable agriculture. Layered Double Hydroxides (LDH), known for their high capacity to sequester plant nutrients, especially phosphate, are emerging as promising candidates for SRF synthesis. The phosphate release properties of MgAl LDH (with a targeted Mg/Al ratio of 2.0) intercalated with HPO42- anions were assessed in various aqueous environments. A comprehensive analysis, including in-depth chemical and structural characterizations (ICP-OES, XRD, PDF, 27Al NMR, 31P NMR, FTIR, SEM) of the as-prepared phase unveiled a more intricate composition than anticipated for a pure or ideal Mg2Al-HPO4 LDH, encompassing an excess of intercalated phosphate in conjunction with K+. Beyond the intercalated phosphate, solid state 31P NMR speciation identified multiple HxPO4(-3+x) environments, indicating a portion of the phosphate reacting with intralayer Mg2+ to form K-struvite. Additionally, some phosphates were adsorbed onto the surface of amorphous aluminum hydroxide, a side phase formed during MgAl coprecipitation. The phosphate release demonstrated rapid kinetics, occurring within 6 days. Moreover, the released phosphate increased significantly when reducing the Solid/Liquid (S/L) ratio (58%) and further increasing in the presence of carbonate ions (90%). The released phosphate varied from 12% to 90% under different release conditions, transitioning from water to a 3.33 mM NaHCO3 aqueous solution at a low S/L ratio (from 20 mg LDH per mL to 0.02 mg LDH per mL). The simultaneous release of K+, Mg2+, Al3+ indicated the complete dissolution of the K-struvite and partial dissolution of phosphate intercalated MgAl LDH. These results enhanced our understanding of the mechanism governing phosphate release from MgAl LDH, paving the way for potential phosphate recovery by LDH or for the development of LDH-based SRFs.
RESUMEN
Nanocomposites based on hydrozincite-TiO2 and copper-doped HZ-xCu-TiO2 (x = 0.1; 0.25; 0.35) were synthesized in a single step using the urea method. The samples were characterized by XRD, FTIR, SEM/TEM, and DRS. The study of adsorption capacity and photocatalytic efficiency of these nanocomposites have been tested on a pharmaceutical pollutant, mefenamic acid (MFA). Kinetic study of removal of MFA indicates that this pollutant was adsorbed on the surface of the synthesized phases, according to Langmuir's model. Such adsorption proved to be well adapted in a kinetic pseudo-second-order model with capacity of 13.08 mg/g for HZ-0.25Cu-TiO2. Subsequently, the kinetics of photocatalytic degradation under UV-visible irradiation was studied according to several parameters, which allowed us to optimize our experimental conditions. The nanocomposite HZ-0.25Cu-TiO2 showed significant removal efficiency of MFA. Elimination rate reached 100% after 20 min under UV-vis irradiation, and 77% after 7 h under visible light irradiation. Repeatability tests have shown that this nanocomposite is extremely stable after six photocatalytic cycles. By-products of MFA were detected by LC/MS. These photoproducts was produced by three types of reactions of hydroxylation: cyclization and cleavage of the aromatic ring. MFA underwent complete mineralization after 22 h of irradiation in the presence of the HZ-0.25Cu-TiO2.
Asunto(s)
Contaminantes Ambientales , Nanocompuestos , Cobre , Ácido Mefenámico , Agua , Titanio , Preparaciones Farmacéuticas , CatálisisRESUMEN
This study describes the behavior of potential slow-release fertilizers (SRF), prepared by the mechanochemical activation of calcined Mg2Al-CO3 or Mg2Fe-CO3 layered double hydroxides (LDH) mixed with dipotassium hydrogen phosphate (K2HPO4). The effects of LDH thermal treatment on P/K release behavior were investigated. Characterizations of the inorganic composites before and after release experiments combined X-Ray diffraction (XRD), Fourier-transform infra-red spectroscopy (FTIR), solid-state nuclear magnetic resonance (NMR), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The best release profile (<75% in 28 days and at least 75% release) was obtained for MgAl/K2HPO4 (9 h milling, 2:1 molar ratio, MR). Compared to readily used K2HPO4, milling orthophosphate into LDH matrices decreases its solubility and slows down its release, with 60% and 5.4% release after 168 h for MgAl/K2HPO4 and MgFe/K2HPO4 composites, respectively. Mechanochemical addition of carboxymethylcellulose to the LDH/K2HPO4 composites leads to a noticeable improvement of P release properties.
RESUMEN
Layered double hydroxides (LDHs), especially (doped) with transition metals, as well as nanohybrid and 2D materials derived from these structures, are interesting materials due to their catalytic and electrochemical properties. Their reactivity is determined by the atomic level distribution of the transition metal in the LDH cation layer, which is essential to control the design of LDHs with optimized properties. However, low crystallinity, absence of long range order, and/or isoelectronic ions often prevent atomic level structural characterization. A series of poorly crystalline Mg2-xNixAl-NO3 LDH materials were investigated by ultrafast 27Al MAS NMR spectroscopy to determine the distribution of Ni2+ in these as well as possible superstructures and their miscibility gaps. Four Ni2Al-LDH samples with interlayer distances ranging from 7.6 to 17.5 Šwere prepared to assess the contribution of inter- and intralayer magnetic interactions. The effects of the Ni2+ content and the atomic level distribution of Ni2+ were probed by ultrafast 27Al MAS NMR spectroscopy: the Al distribution can be modeled using a binomial distribution and neither a superstructure was identified for the MgNiAl-LDH sample nor a miscibility gap. The 27Al isotropic shift, δiso(27Al), is a very sensitive probe for a number of neighboring Ni2+ in the first metal ion sphere, but to a smaller degree it is also affected by the intercalated anion (interlayer distance). These results were used for detailed characterization of an exfoliated (2D)-restacked Mg1.83Ni0.17Al-LDH nanohybrid material and a Mg1.83Ni0.17Al-LDH-alginate nanohybrid material, in which 27Al MAS NMR showed how the structure and partial dissolution of the LDHs were retained. In contrast, both powder X-ray diffraction and vibrational spectroscopies (IR and Raman) reflected only the overall change in sample composition.
RESUMEN
This review highlights the current research on the interactions between biological cells and Layered Double Hydroxides (LDH). The as-prepared biohybrid materials appear extremely attractive in diverse fields of application relating to health care, environment and energy production. We describe how thanks to the main features of biological cells and LDH layers, various strategies of assemblies can be carried out for constructing smart biofunctional materials. The interactions between the two components are described with a peculiar attention to the adsorption, biocompatibilization, LDH layer internalization, antifouling and antimicrobial properties. The most significant achievements including authors' results, involving biological cells and LDH assemblies in waste water treatment, bioremediation and bioenergy generation are specifically addressed.
Asunto(s)
Células/química , Hidróxidos/química , Adsorción , Animales , Antibacterianos/química , Bacterias , Biodegradación Ambiental , Células/metabolismo , Humanos , Hidróxidos/metabolismo , Hidróxidos/toxicidad , Nanopartículas del Metal/química , VirusRESUMEN
Bayerite was treated under hydrothermal conditions (120, 130, 140, and 150 °C) to prepare a series of layered double hydroxides (LDHs) with an ideal composition of ZnAl4(OH)12(SO4)0.5·nH2O (ZnAl4-LDHs). These products were investigated by both bulk techniques (powder X-ray diffraction (PXRD), transmission electron microscopy, and elemental analysis) and atomic-level techniques ((1)H and (27)Al solid-state NMR, IR, and Raman spectroscopy) to gain a detailed insight into the structure of ZnAl4-LDHs and sample composition. Four structural models (one stoichiometric and three different defect models) were investigated by Rietveld refinement of the PXRD data. These were assessed using the information obtained from other characterization techniques, which favored the ideal (nondefect) structural model for ZnAl4-LDH, as, for example, (27)Al magic-angle spinning NMR showed that excess Al was present as amorphous bayerite (Al(OH)3) and pseudoboehmite (AlOOH). Moreover, no evidence of cation mixing, that is, partial substitution of Zn(II) onto any of four Al sites, was observed. Altogether this study highlights the challenges involved to synthesize pure ZnAl4-LDHs and the necessity to use complementary techniques such as PXRD, elemental analysis, and solid-state NMR for the characterization of the local and extended structure of ZnAl4-LDHs.
RESUMEN
Hierarchically porous biocompatible Mg-Al-Cl-type layered double hydroxide (LDH) composites containing aluminum hydroxide (Alhy) have been prepared using a phase-separation process. The sol-gel synthesis allows for the hierarchical pores of the LDH-Alhy composites to be tuned, leading to a high specific solid surface area per unit volume available for high-molecular-weight protein adsorptions. A linear relationship between the effective surface area, SEFF, and loading capacity of a model protein, bovine serum albumin (BSA), is established following successful control of the structure of the LDH-Alhy composite. The threshold of the mean pore diameter, Dpm, above which BSA is effectively adsorbed on the surface of LDH-Alhy composites, is deduced as 20 nm. In particular, LDH-Alhy composite aerogels obtained via supercritical drying exhibit an extremely high capacity for protein loading (996 mg/g) as a result of a large mean mesopore diameter (>30 nm). The protein loading on LDH-Alhy is >14 times that of a reference LDH material (70 mg/g) prepared via a standard procedure. Importantly, BSA molecules pre-adsorbed on porous composites were successfully released on soaking in ionic solutions (HPO4(2-) and Cl(-) aqueous). The superior capability of the biocompatible LDH materials for loading, encapsulation, and releasing large quantities of proteins was clearly demonstrated.
RESUMEN
A soft chemical process was successfully used to immobilize Pseudomonas sp. strain ADP (ADP), a well-known atrazine (herbicide) degrading bacterium, within a Mg2Al-layered double hydroxide host matrix. This approach is based on a simple, quick and ecofriendly direct coprecipitation of metal salts in the presence of a colloidal suspension of bacteria in water. It must be stressed that by this process the mass ratio between inorganic and biological components was easily tuned ranging from 2 to 40. This ratio strongly influenced the biological activity of the bacteria towards atrazine degradation. The better results were obtained for ratios of 10 or lower, leading to an enhanced atrazine degradation rate and percentage compared to free cells. Moreover the biohybrid material maintained this biodegradative activity after four cycles of reutilization and 3 weeks storage at 4°C. The ADP@MgAl-LDH bionanohybrid materials were completely characterized by X-ray diffraction (XRD), FTIR spectroscopy, thermogravimetric analysis and scanning and transmission electronic microscopy (SEM and TEM) evidencing the successful immobilization of ADP within the inorganic matrix. This synthetic approach could be readily extended to other microbial whole-cell immobilization of interest for new developments in biotechnological systems.
Asunto(s)
Atrazina/metabolismo , Hidróxidos/química , Nanocompuestos/química , Pseudomonas/metabolismo , Atrazina/química , Biodegradación Ambiental , Células Cultivadas , Células Inmovilizadas/química , Células Inmovilizadas/citología , Células Inmovilizadas/metabolismo , Viabilidad Microbiana , Tamaño de la Partícula , Pseudomonas/química , Pseudomonas/citología , Propiedades de SuperficieRESUMEN
Decatungstate W10O32(4-) was efficiently intercalated between the layers of three-dimensionally ordered macroporous Mg2Al-layered double hydroxide. The structural and textural properties of as-prepared intercalated compound were characterized using different solid-state characterization techniques such as X-ray powder diffraction, FTIR and Raman spectroscopies and electronic microscopy. The photocatalytic properties of immobilized W10O32 (4-) within Mg2Al structure were investigated using 2-(1-naphthyl) acetamide (NAD) as a model of pesticide. The influence of different parameters such as amount of catalyst, pH and oxygen concentration were investigated. An optimal NAD degradation was obtained for a photocatalyst concentration of 60 mg l(-1). Under our experimental conditions, this heterogeneous photocatalyst induces photodegradation of 60 % of NAD after 17 h of irradiation at 365 nm and at pH 6.6. Interestingly, pesticide photodegradation leads to the mineralization of substrates to H2O and CO2 and the photocatalyst can be recycled and reused without any loss of activity over four cycles.
Asunto(s)
Hidróxidos/química , Sustancias Intercalantes/química , Ácidos Naftalenoacéticos/química , Plaguicidas/química , Compuestos de Tungsteno/química , Compuestos de Tungsteno/efectos de la radiación , Aluminio/química , Catálisis , Magnesio/química , Fotólisis , Espectroscopía Infrarroja por Transformada de Fourier , Espectrometría Raman , Difracción de Rayos XRESUMEN
Immobilization of TK from Escherichia coli (TKec) on MgAl-NO3 layered double hydroxides (LDH) was carried out by two processes: adsorption and coprecipitation. As a comparison, the adsorption method was realized either at pH 7.5 in buffered solutions (MOPS and Gly-Gly) or in pure water. For the coprecipitation method, the formation of the inorganic LDH support was realized directly in the presence of TKec solubilized in Gly-Gly. The prepared biohybrids, called respectively TKec@LDHads and TKec@LDHcop, were characterized by powder X-ray diffraction, FTIR spectroscopy in comparison with TKec free reference products, i.e. MgAl-NO3, MgAl-Gly-Gly. The enzymatic activities of the various TKec@LDH biohybrids as well as their stabilities over time were investigated by UV-vis assay. A maximum of activity (12 U/mg of solid) was reached for TKec@MgAl-Gly-Gly biohybrid prepared by coprecipitation. Finally, thin films were prepared through a one-step deposition on a polished support. The enzymatic activity of the resulting TKec@MgAl-Gly-Glycop film was tested over four recycling processes with a reproducible activity of 2.7 U/mg cm(2).
Asunto(s)
Hidróxido de Aluminio/química , Enzimas Inmovilizadas/metabolismo , Hidróxido de Magnesio/química , Transcetolasa/metabolismo , Adsorción , Biocatálisis , Técnicas Biosensibles/métodos , Precipitación Química , Combinación de Medicamentos , Estabilidad de Enzimas , Escherichia coli/enzimología , Proteínas de Escherichia coli/metabolismo , Difracción de Polvo , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de SuperficieRESUMEN
A natural Cameroonian smectite-type clay (SaNa) was exchanged with cationic surfactants, namely cetyltrimethylammonium (CTA) and didodecyldimethyl ammonium (DDA) modifying its physico-chemical properties. The resulting organoclays that have higher adsorption capacity for mesotrione than the pristine SaNa clay, have been used as modifiers of glassy carbon electrode for the electrochemical detection of this herbicide by square wave voltammetry. The stripping performances of SaNa, SaCTA and SaDDA modified electrodes were therefore evaluated and the experimental parameters were optimized. SaDDA gives the best results in deoxygenated acetate buffer solution (pH 6.0) after 2 min accumulation under open circuit conditions. Under optimal conditions, the reduction current is proportional to mesotrione concentration in the range from 0.25 to 2.5 µM with a detection limit of 0.26 µM. The fabricated electrode was also applied for the commercial formulation CALLISTO, used in European maize market.
Asunto(s)
Silicatos de Aluminio/química , Carbono/química , Ciclohexanonas/análisis , Electroquímica , Vidrio/química , Herbicidas/análisis , Arcilla , Ciclohexanonas/química , Electrodos , Herbicidas/química , Concentración de Iones de Hidrógeno , Difracción de Rayos XRESUMEN
Aerogels of layered double hydroxides were prepared by a simple and eco-friendly method involving a quick coprecipitation followed by supercritical CO(2) drying. Such aerogels display high surface areas and enhanced adsorption behavior.
Asunto(s)
Geles/química , Hidróxidos/química , Nanoestructuras/química , Adsorción , Hidróxido de Aluminio/química , Cobalto/química , Hidróxido de Magnesio/química , Nanoestructuras/ultraestructura , Níquel/química , Propiedades de Superficie , Tripsina/aislamiento & purificaciónRESUMEN
To mimic the role of hydroxide minerals and their humic complex derivatives on the biodegradability of pesticides in soils, synthetic Mg(R)Al Layered Double Hydroxides (LDH) and Mg(R)Al modified by Humic substances (LDH-HA) were prepared for various R values (2, 3 and 4) and fully characterized. Adsorption properties of LDH and LDH-HA toward Pseudomonas sp. strain ADP were evaluated. The adsorption kinetics were very fast (<5 min to reach equilibrium). The adsorption capacities were greater than previously reported (13.5×10(11), 41×10(11) and 45.5×10(11) cells/gLDH for Mg(2)Al, Mg(3)Al and Mg(4)Al, respectively) and varied with both surface charge and textural properties. Surface modification by HA reduced the adsorption capacities of cells by 2-6-fold. Biodegradation kinetics of atrazine by Pseudomonas sp. adsorbed on both LDHs and LDH-HA complexes were measured for various solid/liquid ratios and adsorbed cell amounts. Biodegradation activity of bacterial cells was strongly boosted after adsorption on LDHs, the effect depending on the quantity and properties of the LDH matrix. The maximum biodegradation rate was obtained in the case of a 100 mg/mL Mg(2)Al LDH suspension (26 times higher than that obtained with cells alone).
Asunto(s)
Atrazina/metabolismo , Biodegradación Ambiental , Herbicidas/metabolismo , Hidróxidos/química , Nanocompuestos , Pseudomonas/metabolismo , Adsorción , Cromatografía Líquida de Alta Presión , Microscopía Electrónica de TransmisiónRESUMEN
Colloidal crystals of polystyrene (PS) beads self-assembled on Pt electrode were used as a sacrificial template to electrosynthesis thin films of macroporous Layered Double Hydroxides (LDH). Such nanostructured materials display a high internal surface area and porosity leading to enhanced electrochemical performance.
RESUMEN
Hemoglobin was immobilized in Mg(2)Al-Layered Double Hydroxides (LDH) by coprecipation method at pH 9.0. Interactions between Hb and LDH particles were investigated by X-ray diffraction patterns, FTIR, UV-vis, circular dichroism, and fluorescence spectroscopies. Morphology and porosity of Mg(2)Al-Hb(cop) biohybrid are analyzed from SEM and TEM images and permeability measurement. The direct electron transfer of immobilized Hb was studied by cyclic voltammetry, and the electrocatalytic activity was evaluated at glassy carbon modified with this Mg(2)Al-Hb(cop) biohybrid. Even though the percentage of electroactive Hb was less than 2%, this bioelectrode showed a low detection limit (1.5 x 10(-8) M) and a very high sensitivity (37 A/M cm(2)) for the amperometric detection of H(2)O(2).
Asunto(s)
Técnicas Electroquímicas , Hemoglobinas/química , Hidróxidos/química , Proteínas Inmovilizadas/química , Aluminio , Animales , Precipitación Química , Humanos , Magnesio , Análisis EspectralRESUMEN
An amperometric sensor based on Ni(1-x)Al(x)(OH)(2)NO(3x).nH(2)O layered double hydroxide (LDH) has been developed for the electrochemical analysis in one step of two herbicides: glyphosate (N-(phosphonomethyl)glycine, Glyp) and glufosinate ((DL-homoalanine-4-yl)-methylphosphinic acid, Gluf). NiAl-LDH was prepared by coprecipitation or by electrodeposition at the Pt electrode surface. Inorganic films were fully characterized by X-ray diffraction, Raman spectroscopy and scanning electron microscopy. Adsorption isotherms of Glyp onto this inorganic lamellar material have been established. Electrocatalytic oxidation of Glyp and Gluf is possible at the Ni(3+) centres of the structure. The electrochemical responses of the NiAl-LDH modified electrode were obtained by cyclic voltammetry and chronoamperometry at 0.49V/SCE as a function of herbicide concentration in 0.1M NaOH solution. The electrocatalytic response showed a linear dependence on the Glyp concentration ranging between 0.01 and 0.9mM with a detection limit of 1muM and sensitivity 287mA/Mcm(2). The sensitivity found for Gluf was lower (178mA/Mcm(2)).
RESUMEN
The possible role of structural iron in clays to promote direct electron transfer of hemoglobin (Hb) was investigated. Clays containing different amounts of iron situated in octahedral or tetrahedral sites have been used to modify glassy carbon electrodes: nontronite, synthetic montmorillonite, and saponite. A synthetic montmorillonite containing non-iron impurities was used as a reference. Interactions between Hb and these clays were studied with the establishment of adsorption isotherms and by the analysis of X-ray diffraction patterns, FTIR, and UV-vis spectra of the Hb-clay samples. The electrochemical behavior of clay modified electrodes (CME) was characterized by cyclic voltammetry in the presence of Hb in solution or adsorbed within the clays. Nontronite, which contains the highest amount of structural iron, enhanced significantly direct electron transfer of Hb. Finally, the electrocatalytic behavior of Hb-Nontronite CME in the presence of hydrogen peroxide was also studied, and the H(2)O(2) calibration curve was recorded under amperometric conditions for different bioelectrode configurations.
Asunto(s)
Carbono/química , Hemoglobinas/química , Hierro/química , Silicatos de Aluminio/química , Animales , Bentonita/química , Catálisis , Bovinos , Arcilla , Electroquímica/métodos , Electrodos , Transporte de Electrón , Electrones , Espectrofotometría Ultravioleta/métodos , Propiedades de Superficie , Difracción de Rayos XRESUMEN
The fate of pesticides in the environment is strongly related to the soil sorption processes that control not only their transfer but also their bioavailability. Cationic (Ca-bentonite) and anionic (Layered Double Hydroxide) clays behave towards the ionisable pesticide atrazine (AT) sorption with opposite tendencies: a noticeable sorption capacity for the first whereas the highly hydrophilic LDH showed no interactions with AT. These clays were modified with different humic acid (HA) contents. HA sorbed on the clay surface and increased AT interactions. The sorption effect on AT biodegradation and on its metabolite formation was studied with Pseudomonas sp. ADP. The biodegradation rate was greatly modulated by the material's sorption capacity and was clearly limited by the desorption rate. More surprisingly, it increased dramatically with LDH. Adsorption of bacterial cells on clay particles facilitates the degradation of non-sorbed chemical, and should be considered for predicting pesticide fate in the environment.
Asunto(s)
Silicatos de Aluminio/química , Atrazina/metabolismo , Bacterias/metabolismo , Herbicidas/metabolismo , Sustancias Húmicas/análisis , Contaminantes del Suelo/metabolismo , Adsorción , Atrazina/química , Biodegradación Ambiental , Arcilla , Herbicidas/química , Sustancias Húmicas/microbiología , Microbiología del Suelo , Contaminantes del Suelo/químicaRESUMEN
Formation of new bio-nanohybrid material was obtained by immobilization of alkaline phosphatase within a Mg(2)Al LDH by "soft chemistry" coprecipitation synthesis, resulting in an original spongy gel-like morphology allowing the preservation of the enzyme structure and activity even at low pH values thanks to the buffering property of the basic host structure.