RESUMEN
Many polymeric medical device materials contain color additives which could lead to adverse health effects. The potential health risk of color additives may be assessed by comparing the amount of color additive released over time to levels deemed to be safe based on available toxicity data. We propose a conservative model for exposure that requires only the diffusion coefficient of the additive in the polymer matrix, D, to be specified. The model is applied here using a model polymer (poly(ether-block-amide), PEBAX 2533) and color additive (quinizarin blue) system. Sorption experiments performed in an aqueous dispersion of quinizarin blue (QB) into neat PEBAX yielded a diffusivity D = 4.8 × 10-10 cm2 s-1 , and solubility S = 0.32 wt %. On the basis of these measurements, we validated the model by comparing predictions to the leaching profile of QB from a PEBAX matrix into physiologically representative media. Toxicity data are not available to estimate a safe level of exposure to QB, as a result, we used a Threshold of Toxicological Concern (TTC) value for QB of 90 µg/adult/day. Because only 30% of the QB is released in the first day of leaching for our film thickness and calculated D, we demonstrate that a device may contain significantly more color additive than the TTC value without giving rise to a toxicological concern. The findings suggest that an initial screening-level risk assessment of color additives and other potentially toxic compounds found in device polymers can be improved. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 310-319, 2018.
Asunto(s)
Antraquinonas , Colorantes , Modelos Químicos , Nylons/química , Antraquinonas/química , Antraquinonas/farmacocinética , Colorantes/química , Colorantes/farmacocinética , Medición de RiesgoRESUMEN
Liners used in orthopedic devices are often made from ultrahigh molecular weight polyethylene (UHMWPE). A general predictive capability for transport coefficients of small molecules in UHMWPE does not exist, making it difficult to assess properties associated with leaching or uptake of small molecules. To address this gap, we describe here how a form of the Vrentas-Duda free volume model can be used to predict upper-bound diffusion coefficients (D) of arbitrary molecules within UHMWPE on the basis of their size and shape. Within this framework, the free-volume microstructure of UHMWPE is defined by analysis of a curated set of model diffusants. We determined an upper limit on D for vitamin E, a common antioxidant added to UHMWPE, to be 7.1 × 10-12 cm2 s-1 . This means that a liner that contains 0.1 wt % or less Vitamin E and has <120 cm2 patient contacting surface area would elute <100 µg/day of vitamin E. Additionally, the model predicts that squalene and cholesterol-two pro-oxidizing biological compounds-do not penetrate over 820 µm into UHMWPE liners over the course of 5 years because their D is ≤7.1 × 10-12 cm2 s-1 . © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2393-2402, 2018.
Asunto(s)
Materiales Biocompatibles Revestidos/química , Prótesis de Cadera , Ensayo de Materiales , Polietilenos/química , HumanosRESUMEN
A novel approach for rapid risk assessment of targeted leachables in medical device polymers is proposed and validated. Risk evaluation involves understanding the potential of these additives to migrate out of the polymer, and comparing their exposure to a toxicological threshold value. In this study, we propose that a simple diffusive transport model can be used to provide conservative exposure estimates for phase separated color additives in device polymers. This model has been illustrated using a representative phthalocyanine color additive (manganese phthalocyanine, MnPC) and polymer (PEBAX 2533) system. Sorption experiments of MnPC into PEBAX were conducted in order to experimentally determine the diffusion coefficient, D = (1.6 ± 0.5) × 10-11 cm2/s, and matrix solubility limit, C s = 0.089 wt.%, and model predicted exposure values were validated by extraction experiments. Exposure values for the color additive were compared to a toxicological threshold for a sample risk assessment. Results from this study indicate that a diffusion model-based approach to predict exposure has considerable potential for use as a rapid, screening-level tool to assess the risk of color additives and other small molecule additives in medical device polymers.
Asunto(s)
Colorantes/química , Modelos Teóricos , Polímeros/química , Seguridad de Productos para el Consumidor , Difusión , Equipos y Suministros , Indoles/química , Isoindoles , Medición de RiesgoRESUMEN
Ethylene oxide (EO) gas is commonly used to sterilize medical devices. Bioavailable residual EO, however, presents a significant toxicity risk to patients. Residual EO is assessed using international standards describing extraction conditions for different medical device applications. We examine a series of polymers and explore different extraction conditions to determine residual EO. Materials were sterilized with EO and exhaustively extracted in water, in one of three organic solvents, or in air using thermal desorption. The EO exhaustively extracted varies significantly and is dictated by two factors: the EO that permeates the material during sterilization; and the effectiveness of the extraction protocol in flushing residual EO from the material. Extracted EO is maximized by a close matches between Hildebrand solubility parameters δpolymer , δEO , and δsolvent . There remain complexities to resolve, however, because maximized EO uptake and detection are accompanied by great variability. These observations may inform protocols for material selection, sterilization, and EO extraction. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2455-2463, 2018.
Asunto(s)
Equipos y Suministros , Óxido de Etileno/análisis , Esterilización/métodos , Óxido de Etileno/químicaRESUMEN
Despite active research, many fundamental aspects of block copolymer ordering remain unresolved. We studied the thickness-dependence of block copolymer grain coarsening kinetics, and find that thinner films order more rapidly than thicker films. Bilayer films, or monolayers with partial layers of islands, order more slowly than monolayers because of the greater amount of material that must rearrange in a coordinated fashion. Sub-monolayer films order much more rapidly than monolayers, exhibiting considerably smaller activation energies, as well as larger exponents for the time-growth power-law. Using molecular dynamics simulations, we directly study the motion of defects in these film regimes. We attribute the enhanced grain growth in sub-monolayers to the film boundaries, where defects can be spontaneously eliminated. The boundaries thus act as efficient sinks for morphological defects, pointing towards methods for engineering rapid ordering of self-assembling thin films.
RESUMEN
We investigate the link between dynamic localization, characterized by the Debye-Waller factor, ãu(2)ã, and solute self-diffusivity, D, in a polymer system using atomistic molecular dynamics simulations and vapor sorption experiments. We find a linear relationship between lnD and 1/ãu(2)ã over more than four decades of D, encompassing most of the glass formation regime. The observed linearity is consistent with the Langevin dynamics in a periodically varying potential field and may offer a means to rapidly assess diffusion based on the characterization of dynamic localization.
RESUMEN
An overview of diffuse interface models specific to drug-eluting stent coatings is presented. Microscale heterogeneities, both in the coating and use environment, dictate the performance of these coatings. Using diffuse interface methods, these heterogeneities can be explicitly incorporated into the model equations with relative ease. This enables one to predict the complex microstructures that evolve during coating fabrication and subsequent impact on drug release. Examples are provided that illustrate the wide range of phenomena that can be addressed with diffuse interface models including: crystallization, constrained phase separation, hydrolytic degradation, and heterogeneous binding. Challenges associated with the lack of material property data and numerical solution of the model equations are also highlighted. Finally, in light of these potential drawbacks, the potential to utilize diffuse interface models to help guide product and process development is discussed.
Asunto(s)
Stents Liberadores de Fármacos , Modelos Químicos , Farmacocinética , Animales , HumanosRESUMEN
Block-copolymer orientation in thin films is controlled by the complex balance between interfacial free energies, including the inter-block segregation strength, the surface tensions of the blocks, and the relative substrate interactions. While block-copolymer lamellae orient horizontally when there is any preferential affinity of one block for the substrate, we recently described how nanoparticle-roughened substrates can be used to modify substrate interactions. We demonstrate how such 'neutral' substrates can be combined with control of annealing temperature to generate vertical lamellae orientations throughout a sample, at all thicknesses. We observe an orientational transition from vertical to horizontal lamellae upon heating, as confirmed using a combination of atomic force microscopy (AFM), neutron reflectometry (NR) and rotational small-angle neutron scattering (RSANS). Using molecular dynamics (MD) simulations, we identify substrate-localized distortions to the lamellar morphology as the physical basis of the novel behavior. In particular, under strong segregation conditions, bending of horizontal lamellae induce a large energetic cost. At higher temperatures, the energetic cost of conformal deformations of lamellae over the rough substrate is reduced, returning lamellae to the typical horizontal orientation. Thus, we find that both surface interactions and temperature play a crucial role in dictating block-copolymer lamellae orientation. Our combined experimental and simulation findings suggest that controlling substrate roughness should provide a useful and robust platform for controlling block-copolymer orientation in applications of these materials.
Asunto(s)
Nanopartículas/química , Transición de Fase , Polímeros/química , Temperatura de Transición , Calefacción , Simulación de Dinámica Molecular , Nanopartículas/ultraestructura , Difracción de Neutrones , Dispersión del Ángulo Pequeño , Propiedades de SuperficieRESUMEN
Diffusion of small to medium sized molecules in polymeric medical device materials underlies a broad range of public health concerns related to unintended leaching from or uptake into implantable medical devices. However, obtaining accurate diffusion coefficients for such systems at physiological temperature represents a formidable challenge, both experimentally and computationally. While molecular dynamics simulation has been used to accurately predict the diffusion coefficients, D, of a handful of gases in various polymers, this success has not been extended to molecules larger than gases, e.g., condensable vapours, liquids, and drugs. We present atomistic molecular dynamics simulation predictions of diffusion in a model drug eluting system that represent a dramatic improvement in accuracy compared to previous simulation predictions for comparable systems. We find that, for simulations of insufficient duration, sub-diffusive dynamics can lead to dramatic over-prediction of D. We present useful metrics for monitoring the extent of sub-diffusive dynamics and explore how these metrics correlate to error in D. We also identify a relationship between diffusion and fast dynamics in our system, which may serve as a means to more rapidly predict diffusion in slowly diffusing systems. Our work provides important precedent and essential insights for utilizing atomistic molecular dynamics simulations to predict diffusion coefficients of small to medium sized molecules in condensed soft matter systems.
Asunto(s)
Portadores de Fármacos/química , Modelos Químicos , Simulación de Dinámica MolecularRESUMEN
Non-covalent molecular association underlies a diverse set of biologically and technologically relevant phenomena, including the action of drugs on their biomolecular targets and self- and supra-molecular assembly processes. Computer models employed to model binding frequently use interaction potentials with atomistic detail while neglecting the thermal molecular motions of the binding species. However, errors introduced by this simplification and, more broadly, the thermodynamic consequences of molecular flexibility on binding, are little understood. Here, we isolate the fundamental relationship of molecular flexibility to binding thermodynamics via simulations of simplified molecules with a wide range of flexibilities but the same interaction potential. Disregarding molecular motion is found to generate large errors in binding entropy, enthalpy and free energy, even for molecules that are nearly rigid. Indeed, small decreases in rigidity markedly reduce affinity for highly rigid molecules. Remarkably, precisely the opposite occurs for more flexible molecules, for which increasing flexibility leads to stronger binding affinity. We also find that differences in flexibility suffice to generate binding specificity: for example, a planar surface selectively binds rigid over flexible molecules. Intriguingly, varying molecular flexibility while keeping interaction potentials constant leads to near-linear enthalpy-entropy compensation over a wide range of flexibilities, with the unexpected twist that increasing flexibility produces opposite changes in entropy and enthalpy for molecules in the flexible versus the rigid regime. Molecular flexibility is thus a crucial determinant of binding affinity and specificity and variations in flexibility can lead to strong yet non-intuitive consequences.
RESUMEN
Next-generation applications of block copolymer thin films will require a better understanding of the driving forces unique to thin film coatings, specifically those arising from the polymer-air interface. Previous modeling studies of film morphology have treated rigidly confined films, neglecting free surface considerations altogether. We report in this article the first systematic molecular dynamics investigation of block copolymer thin film ordering for unconfined films. We investigate the molecular basis of the formation of a number of experimentally relevant coating features, including surface islands and vertical lamellae. Surface islands are found to form in response to film incommensurability, whereas commensurability considerations are insufficient to explain vertical lamellar formation. Dynamics of lamellar formation presented herein demonstrate that vertical lamellar orientation is initiated in the surface regions of the film, most strikingly at the free surface. We conclude that the free surface plays a pivotal role in the free energy balance determining overall film morphology, and that confinement models provide an incomplete explanation of the physical basis of morphology selection in block copolymer coatings.
Asunto(s)
Simulación de Dinámica Molecular , Polímeros/química , Entropía , Propiedades de Superficie , TemperaturaRESUMEN
We have implemented a coarse-grained model to study voltage-driven as-DNA translocation through nanopores located in synthetic membranes. The simulated trajectory of the DNA through the nanopores was calculated using Langevin dynamics. We present the results based on more than 120,000 individual translocations. We are particularly interested in this work in probing the physical basis of various experimentally observed--yet poorly understood--phenomena. Notably, we observe in our simulations the formation of ds-DNA hairpins, widely suspected to be the basis for quantized blockage. We study the translocation time, a measurable quantity crucially important in polyelectrolyte characterization, as a function of hairpin vertex location along the polymer backbone, finding that this behavior can be tuned to some degree by simulation parameters. We also study the voltage dependence of the tendency of hairpins to serve as the initiators of translocation events. Surprisingly, we find that the resulting probability depends vitally upon whether the events counted are ultimately successful or not. Further details lead us to propose that failed attempts in experimental translocation studies may be more common--and deceptive--than is generally recognized. We find the time taken by successful single file translocations to be directly proportional to the ratio of chain length to the applied voltage. Finally, we address a common yet puzzling phenomenon in translocation experiments: translocation events in which the current through the pore is highly, yet incompletely, blocked. We present the findings that offer a new explanation for such events.
Asunto(s)
Biofisica/métodos , ADN/química , Nanocompuestos/química , Nanotecnología/métodos , Química Física/métodos , Simulación por Computador , Modelos Estadísticos , Modelos Teóricos , Peso Molecular , Nanopartículas/química , Conformación de Ácido Nucleico , Probabilidad , Electricidad EstáticaRESUMEN
We use Langevin dynamics simulations to study the process by which a coarse-grained DNA chain is packaged within an icosahedral container. We focus our inquiry on three areas of interest in viral packing: the evolving structure of the packaged DNA condensate; the packing velocity; and the internal buildup of energy and resultant forces. Each of these areas has been studied experimentally, and we find that we can qualitatively reproduce experimental results. However, our findings also suggest that the phage genome packing process is fundamentally different than that suggested by the inverse spool model. We suggest that packing in general does not proceed in the deterministic fashion of the inverse-spool model, but rather is stochastic in character. As the chain configuration becomes compressed within the capsid, the structure, energy, and packing velocity all become dependent upon polymer dynamics. That many observed features of the packing process are rooted in condensed-phase polymer dynamics suggests that statistical mechanics, rather than mechanics, should serve as the proper theoretical basis for genome packing. Finally we suggest that, as a result of an internal protein unique to bacteriophage T7, the T7 genome may be significantly more ordered than is true for bacteriophage in general.