Organic-solvent ditch overlap in reversed-phase liquid chromatography: A molecular dynamics simulation study in cylindrical 6-12 nm-diameter pores.

Mass transport through the mesopore space of a reversed-phase liquid chromatography (RPLC) column depends on the properties of the chromatographic interface, particularly on the extent of the organic-solvent ditch that favors the analyte surface diffusivity. Through molecular dynamics simulations in cylindrical RPLC mesopore models with pore diameters between 6 and 12 nm we systematically trace the evolution of organic-solvent ditch overlap due to spatial confinement in the mesopore space of RPLC columns for small-molecule separations. Each pore model of a silica-based, endcapped, C18-stationary phase is equilibrated with two mobile phases of comparable elution strength, namely 70/30 (v/v) water/acetonitrile and 60/40 (v/v) water/methanol, to consider the influence of the mobile-phase composition on the onset of organic-solvent ditch overlap. The simulations show that, as the pore diameter decreases from 9 to 6 nm, the bonded-phase density extends and compacts towards the pore center, which leads to increased accumulation of organic-solvent excess and thus enhanced organic-solvent diffusivity in the ditch. Because the acetonitrile ditch is more pronounced than the methanol ditch, acetonitrile ditch overlap sets in at less severe spatial confinement than methanol ditch overlap. The pore-averaged methanol and acetonitrile diffusivities are considerably raised by ditch overlap in the 6 nm-diameter pore, but also benefit from the ditch (without overlap) in the 7 to 12 nm-diameter pores, whereby local and pore-averaged effects are generally larger for acetonitrile than methanol.

Factors affecting mixed-mode retention properties of cation-exchange stationary phases.

Cation-exchange stationary phases were characterized in different chromatographic modes (HILIC, RPLC, IC) and applied to the separation of non-charged hydrophobic and hydrophilic analytes. The set of columns under investigation included both commercially available cation-exchangers and self-prepared PS/DVB-based columns, the latter consisting of adjustable amounts of carboxylic and sulfonic acid functional groups. The influence of cation-exchange site and polymer substrate on the multimodal properties of cation-exchangers was identified using selectivity parameters, polymer imaging and excess adsorption isotherms. Introducing weakly acidic cation-exchange functional groups to the unmodified PS/DVB-substrate effectively reduced hydrophobic interactions, whilst a low degree of sulfonation (0.09 to 0.27% w/w sulphur) mainly influenced electrostatic interactions. Silica substrate was found to be another important factor for inducing hydrophilic interactions. The presented results demonstrate that cation-exchange resins are suitable for mixed-mode applications and offer versatile selectivity.