RESUMEN
The enzymatic recycling of polyethylene terephthalate (PET) can be a promising approach to tackle the problem of plastic waste. The thermostability and activity of PET-hydrolyzing enzymes are still insufficient for practical application. Pretreatment of PET waste is needed for bio-recycling. Here, we analyzed the degradation of PET films, packages, and bottles using the newly engineered cutinase Cut190. Using gel permeation chromatography and high-performance liquid chromatography, the degradation of PET films by the Cut190 variant was shown to proceed via a repeating two-step hydrolysis process; initial endo-type scission of a surface polymer chain, followed by exo-type hydrolysis to produce mono/bis(2-hydroxyethyl) terephthalate and terephthalate from the ends of fragmented polymer molecules. Amorphous PET powders were degraded more than twofold higher than amorphous PET film with the same weight. Moreover, homogenization of post-consumer PET products, such as packages and bottles, increased their degradability, indicating the importance of surface area for the enzymatic hydrolysis of PET. In addition, it was required to maintain an alkaline pH to enable continuous enzymatic hydrolysis, by increasing the buffer concentration (HEPES, pH 9.0) depending on the level of the acidic products formed. The cationic surfactant dodecyltrimethylammonium chloride promoted PET degradation via adsorption on the PET surface and binding to the anionic surface of the Cut190 variant. The Cut190 variant also hydrolyzed polyethylene furanoate. Using the best performing Cut190 variant (L136F/Q138A/S226P/R228S/D250C-E296C/Q123H/N202H/K305del/L306del/N307del) and amorphous PET powders, more than 90 mM degradation products were obtained in 3 days and approximately 80 mM in 1 day.
RESUMEN
Several meltable coordination polymers (CPs) that possess substantial advantages attributable to their high flexibility and processability have been developed recently; however, the melting mechanism and vitrification conditions of these materials are not yet fully understood. In this study, we synthesized meltable CPs [A][K(TCM)2] (A = onium cation, TCM = C(CN)3-) incorporating ionic liquid components and investigated their crystal structures and melting behaviors in detail. These CPs feature two- or three-dimensional anionic [K(TCM)2]n- frameworks incorporating onium cations. Each CP was found to undergo incongruent melting at a temperature between 73 and 192 °C to produce a heterogeneous mixture of the ionic liquid ([A][TCM]) and microcrystalline K[TCM]. Furthermore, they formed homogeneous liquids upon further heating to â¼240 °C. The melting points of these CPs were linearly correlated with those of their constituent ionic liquids. The vitrification of these materials upon rapid cooling from the molten state was further investigated. The cooling rates required for vitrification differed greatly between the CPs and were correlated with the cation flexibility.
RESUMEN
An ionic-liquid-containing 2D coordination polymer was synthesized via a solvent-free reaction. The material exhibited incongruent melting at 112 °C, forming a solid-liquid mixture; further heating to 240 °C led to complete melting. Upon cooling, the melt transformed into a solid-liquid mixture, from which the coordination polymer was gradually recovered at ambient temperature. Rapid cooling (>200 °C s-1) of the melt resulted in complete vitrification at -28 °C.
RESUMEN
We report the first observation of spin-flop-induced sharp positive magnetoresistance as large as 100% and nonvolatile magnetoresistive memory in a π-d hybrid molecular conductor, (DIETSe)(2)FeCl(4) [DIETSe = diiode(ethylenedithio)tetraselenafulvalene]. The unprecedented magnetotransport phenomena originate from the coexistence of the spin density wave (SDW) of the quasi-one-dimensional (Q1D) π electrons and the antiferromagnetic order of d-electron spins, indicating the interplay between the electronic instability of Q1D π electrons and local moments of antiferromagnetic d-electron spins. These findings offer new possibilities in molecular electronics/spintronics.
